126 modeli
Suzuka International Racing Course with elevation and to scale. Printing : At 190% you can fit it on an Ender 3 (V2), an Aquila or any other printer with a 220x220mm bed. I have attached a premade 3mf for Prusa Slicer (2.5.0). Make sure…
Wydruk około 3,89 €–4,75 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you Anycubic Kobra S1 top cover elevation 40mm . It is suitable for increasing the space for cables and bowden. The elevation is precise and fits beautifully. The side panels can be opened to vent hot air. The logo…
Wydruk około 7,81 €–9,55 € nettoWstępna wycena jednego wariantu
I used four color change but you can set more changes according to the height
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Recommended 0,2 mm nozzle 0,12 mm height of each layer For to much stringing use a lighter to remove the fuzzy strings, but be careful Digital elevation data (Attribution) Global ocean terrain GEBCO Compilation Group (2023) GEBCO 2023…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
Hello, Today I have a very simple elevation of the top cover of the Anycubic Kobra S1 for you. It is convenient so that the bowden cables do not rub against the top of the cover. It increases the space for hoses and cables. The cover is…
Wydruk około 9,21 €–11,26 € nettoWstępna wycena jednego wariantu
🌎 📐 Educational Model 🔍📊 At MiniWorld3D , education is one of our primary goals. In addition to actual Lessons published for Educators , here is this free and collaborative project for anyone to enjoy. Our regular models are also used by…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Recently I became interested in F1, so I decided to design some tracks with their elevation. They will be available in 4 formats: either with their original elevation scale, 3x and 5x superelevated, or with no elevation. All circuits are…
World map (Robinson projection) with approximative elevation About 1.5m large Can be printed with every kind of settings. The one visible on the picture has been printed with a 0.6mm nozzle, 0.32 layer height, 2 perimeters, 5% gyroide…
The elevation system to use with the basic tile to create different levels in your marble track. The sticks fit into the holes of the basic tiles and can be fitted either in; the ground plate, another basic tile or the spacer plate. The…
Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…
Der Ständer hebt das Notebook um ca 5cm an. Dadurch passt es besser zum zweiten Hauptbildschirm und ist ergonomischer. Darüberhinaus sorgt für bessere Luftzufuhr zum Notebook. Neben den beiden Seitenteilen besteht der Ständer aus zwei…
After a recent trip to the Nordschleife with my friends I wanted to create a small memento of the visit. This is a great item for anyones desk, mantle piece or wall. Just scale to the size that suits you and admire the elevation changes…
*** Free to print, NOT to sell *** For Commercial Rights, you must join my Club. WHAT IS IT A travel version of a marble boardgame. The games I have seen that use this board are Carbles, Aggrevation, Trouble, the Marble Game, Wahoo, and…
Large model so you can scale down to your bed size or cut it up and make it as big as you want. I printed it in about 6 pieces to make a large wall décor piece.
Update 12.08.2025: Added Pillars in 50mm, 60mm, 80mm, and 90mm NOTE: The “Pillars height” is not its actual height, but the total height of the tower you get using it. Example: Base + Pillar50 + Head (Another Base) has a total Height of…
Elevation Platform for Dungeons and Dragons or other TTRPGs. The platforms are in three different sizes 5, 10, and 15ft. The platform and posts are connected with a tight press fit. If the fit is too lose or tight scale the platform…
Doesnt need any hardware to work I added the steps if you need to adjust the tightness of the rail mounts or if you want to modify it for use with bolts Assembly: put the long flat bar with the two holes into the hollow picatinny rail,…
Update 6th of March the w.i.p. status has been removed from the stabilization system use two sticks and one clip (tight) to create a stabilization beam. The ML4 stabilizer ring is only applicable for the Motorized Lift v4 The ML4…
XL Hamster Laufrad mit optionaler Erhöhung Hamsterlaufrad in 25cm Durchmesser. Mit der Verlängerung kann man das Rad auf den festen Boden stellen und dazwischen noch Streu packen, dann steht es stabiler und es sieht schöner aus.…
The Marina Bay Street Circuit from Singapore to scale and with elevation. Also featuring indicators for DRS detection zones and the start/finish line. The model was made from scratch in onshape using data from the Formula 1 website. Edit:…
this is a model made using free, open-source software called TouchTerrain of the elevation of the Iberian peninsula (Spain, Portugal, Andorra, Gibraltar and some parts of France) hope you like it :) Also if you want to you can scale it…
This is a 3D elevation map of a race track called Nordschleife displayed on a base. I recommend printing the race track in a higher resolution so you can see the elevation without abrupt layer lines.
Soportes de elevacion de puente en diferentes alturas y con angulo, para pistas Scalextric Digital. El mismo soporte vale para la subida y la bajada dándole la vuelta :) Comentarios bienvenidos, si los utilizas en tu circuito, pon alguna…
F1 circuit Autodromo Hermanos Rodriguez Mexico City - with elevation, with data taken from f1.com (circuit shape and elevation points). Can be printed as it is or scaled to desired size.
Flying PC/NPC indicator with platforms for 28mm sized D&D/Pathfinder/RPG. The indicator is 2" tall and marked from 10-100ft in 5 ft increments using a small rubber band. Optional 2- and 4-inch platforms are designed to support larger…
F1 circuit Sao Paulo Grand Prix Interlagos Autodromo Jose Carlos Brazil - with elevation, start line and DRS detectin zones. Data (elevation and circuit shape are taken from f1.com). Can be printed with small supports on DRS and start…
Here are wall segments with print-in-place working doors for my Level-Up Game Elevation platforms . These are designed to work with games that use 10 cm square tiles (such as Assassin's Creed: Brotherhood of Venice) and, function just…
I needed a shorter fin for shallow waters. Designed based on stock fin. Designed to print flat to maximize layer strength. Print the pin and add CA glue to fix it (Crazy glue). EDIT: Added the base only STL in case you want to create…
PETG, 5% infill, 2 layers. Maybe 200x200 will be fine with small mods. If you want so, let me know in the comments, I'll create smaller versions then. It's a simple work, but boring and took me quite some time, so you don't have to waste…
F1 Circuit of The Americas US - with elevation and DRS detection zones, made from data taken from f1.com (circuit shape and elevation points). Can be printed as it is, no support is needed. Or, it can be scalled up to desired dimension.
Designed to fit the Sovol SV06 platform to elevate and strengthen original injection molded parts. This set stiffens and tightens the rod tolerance as well as offer a more refined version of the original parts. This elevates the build…
Pillars for the Gravitrax Elevation Systems by thomas and JDO.
remix of Sabin's great COTA model but with the DRS zones removed
After I made the elevation platforms to give my Assassin's Creed boardgame some depth between the rooftops and the courtyards, I realized that the black line “walls” between spaces were now much less impressive than they were before. So,…
This is a parametric OpenSCAD model to create paddings for superelevation for model railroads. Two files are included for a transitional section and a normal curve section. Parameters to change are the nominal radius of the track, the…
Adds a bit of elevation to the Outlaw rear sight for better and more intuitive blasting. Print as imported, support 90 degree overhangs. Block supports at the holes. Install dots by applying superglue to 1.75mm filament, pressing in, and…
I made these elevation platforms for the Assassin's Creed board game, so they fit games that use 10 cm square tiles. There are two heights: 2 mm and 32 mm, so courtyard tiles can be placed on the 2 mm high platforms and rooftop tiles can…
This is how I came up with the naming for the BT Hexes: Breakdown: A simple way to explain is by example. If you look at something like 1L12L23L3T(B) it looks like a lot but its pretty simple. The first triplet is 1L1 this means there is…
This scale is made to be mounted on the side of the Hadley to make it easy to read/adjust the elevation angle. The arm should swing easily, and there is a hole to add screw for more weight. The 5° tick markings are wide enough to fit a…
Elevation map of a section of CT around Middletown, Portland area. Looks impressive with 2 colors showing the distinction between the Connecticut river and the surrounding land. Thanks to touchterrain for converting the DEM data to stl…
To get the best results, the thinner the layer height the better. I will print race track with the first few layers at 0.1 mm with 0.05 mm for the elevation. The elevation and layout is be the P1 time from the 2024 Monaco Grand Prix. The…
Wall art representing the Silverstone Circuit along with a few Formula 1 facts about the circuit.
This is a elevation scope magnifier for a 30mm scope. Magnifies the numbers on the elevation turret by 3x for easier reading. Assembly: Cut the credit card magnifier to fit the frame. Place magnification piece into frame and then press…
Hubitat Elevation home automation C8 Pro hub wall mount, files include five mounting options. Blank: flat on back. CS: for small poster Command Strips. Keyhole: with a keyhole slot. 20mmoc: with four holes in a 20mm grid. Skadis 40mm:…
I made this modular system to simulate floating and flying for our ttrpg battlemap needs. The idea is to use a base and a top with a piece of clear tube of variable length. For something like 1 square (or 5") up, you just place the top on…
Small cap to replace the windage / elevation dials on repro aimpoints. Also has the raised part to adjust. May need scaling to suit your item. Print Settings Printer brand: Creality Printer: Ender-3 S1 Rafts: Doesn't Matter Supports: Yes…
Elevation platforms for use of miniatures in roll playing games like Dungeons and Dragons. Made with a wide platform to accommodate more than one mini. Height is scaled for 1inch increments. I personally use them in conjunction with a…
I designed this as a replacement for a Craftsman 10" belt-drive table saw model 113.299315 - but it's very likely to work on any saw with a ½" tilt/elevation shaft. Additional hardware needed: (1x) ¼"-20 coarse thread Square Nut (1x)…
A simple monitor stand / monitor riser with a good style that is still easy to print. - Lightweight and printable in one part -Handsome and with style -has a great purpose and is very well thought out If you like my work/project, please…
Fazua Evation 50 Bottom Bracket Splash cover is for Fazua motored e-bikes to protect bottom bracket electronics. BB has sensitive electronics inside, that is why it is good to protect it from splashes and dust. Easy to remove, dust should…
This part makes the IKEA Lack table 35 mm taller and makes it possible to place the Klipsch R-120SW subwoofer under the table. If you like my design, you can buy me a cup of coffee :) Thank you!
Great for wall mounting the drivepack while charging. The fit of the top bracket is rather tight, so it could be printed at a somewhat increased scale to make it looser. Should be printed with 4 or 5 perimeters for strength. I've used…
Plumb line piece needs to be printed as set of two and then glue it together, possibly with something heavy inside. Clips needs to be printed 5 times and glue to the sides of base plate. Other parts are not glued as can be folded into…
Stand with small storage for iMac, Apple Displays or any regular computer monitor. Can be printed with or without the back piece, but it's recommended for extra strength. I printed mine in XT CF-20 with 20% infill and 3 outlines.…
This is a replacement for the Aimpoint COMPC3 turret cap, my model is pre-2014. I don't know if it fits the newer models. I didn't find any details about the thread and the pitch online, so I had to measure it by myself and draw it. I…
This model is a hexagonal tiling of the Continental US (Mercator projection) where the height of each tile represents the average height of the land (in log scale). There is a simpler tiling (approximately 60x28 tiles) in a 1 ft / 305mm…
I made this support because I realized that the fan is at the bottom of the equipment, it got very hot due to not having an air intake for the fan. With this support now my router does not heat up anymore and stopped crashing.
Used to angle SVS Elevation speakers towards the ear level of the listener and uses the existing mount provided by SVS. Files included are for a 34.7 degree angle, which was for my personal setup. However the included fusion 360 file is…
This is meant to be placed in your cup holder to keep your drink higher than it is, making it easier to lift up. This is a 30cm elevation, scale up on the Z axis of your preferred slicer if you need it higher or lower.
Mercury's surface is dominated by impact craters, basaltic rock and smooth plains, many of them a result of flood volcanism. Craters on Mercury range in diameter from small bowl-shaped craters to multi-ringed impact basins hundreds of…
Plugs into an existing bottom from the top, takes the original top
I made this design to improve the refrigeration of my gaming laptop because my laptop stand isn't prepared for gaming laptops. Stand thickness: 2.6mm
Generate a 3d model of data in a grid (great for "daily data for a year") Personal side note I added the two photos of the white graph after I originally posted this. The graph in those photos is particularly meaningful to me right now…
This is a stackable 1 inch cube designed to represent 5 feet of elevation in tabletop RPGs that are played on a 1 inch grid (such as Pathfinder, Starfinder, or D&D). Includes drainage hole as well as a presupported version for resin…
This system of adjustable plateforms allows to easily raise miniatures for TTRPG games. All the part are easily swapable (no glue) so it is easily interchangeable on the fly without interrupting your precious game time, because we all…
This is a vase created by mapping a 2D image around a cylinder.
Hubitat Elevation home automation C5/C7 hub wall mount, files include four mounting options. Blank: flat on back. CS: for small poster Command Strips. Keyhole: with a keyhole slot. 20mmoc: with four holes in a 20mm grid. Holder keeps hub…
3C Wall Mount Hubitat Elevation home automation hub wall mount, works on C5, C7 and C8 generations of hubs. C-5 and C-7 as well as both versions of C-8, Pro and regular. Shown with some Green Neon Acrylic paint. Holder keeps hub slightly…
Uses the same pieces from the " Hadley Hill Mount Worm Gear Altitude adjustor ", with the exception of the larger gear that was remade to be fitted on the rocker of the hadley neumo. The worm gear's self-locking ability is quite nice. I…
Edited the spacer plate to have holes all the way through it. If author wants to copy it to original post, I don't mind removing this to deduplicate.
I've made bigger water tray for Xiaomu hot water dispanser known as MSYSJ03 and S1 model. And also elevated tray for smaller cups to eliminate water splashes. Elevation tray has grill reinforcement and easily fixes on the basement with…
I wanted a better way to control the elevation of the telescope, but I did not want to reprint any of the larger pieces, so I created this gear set. Maybe I printed something wrong, but to fit the sturdy mount with the original neumo…
Our Eames Chair Replica chairs are a bit to low for us, so this is a thing to rais them 2 cm. You will need attionial M6x35 screws to replace the old shorter ones. I do not now if they will also fit the original Eames Chair, but they do…
Insert for 1" scope rings to add 20 mil to elevation. Insert between underside scope and rings to give extra range to scope. Been using it them for over 6 months on bench and range. Proving to be very stable holding zero without creep.…
Simple and strong elevation for your flower pot.
Combine the suitable modules to obtain the desired height. Take the basic module and add the desired middle parts before you finish the build with an End piece. The circles are to prevent the leg from slipping on the elevation. For a…
This is a 3D terrain model of Petit Jean Mountain in Arkansas in STL format. The elevation is “exaggerated” to make it easier to see the geographic features. This model probably works best with resin printers. The model was generated with…
I have made 3 versions of Height Elevation Wedges for the Sonos Arch Ultra. Based on Peter Pee YouTube guide on “How to place the Sonos Arc for best Atmos effects” Link: https://www.youtube.com/watch?v=hu8TLAco2tI The heights are based on…
Basic Hubitat Elevation home automation hub Desk Stand Mount Holder for C5/C7 to hold device in a vertical position. One version with solid base and one with holes. Also includes an (untested) elevated version to clear C8 antennas. The…
If you have a Nifty 36 Coffee Pod Kcup 3 Drawer Holder and the bottom drawer is obstructed and inaccessible, this stand will elevate the holder 53mm. Rubber feet are needed to prevent the stand from moving around when drawers are opened…
Overview This little security anchor attaches to the end of an Elevation Lab TimeCapsule to provide an anchor point for wire loops with in-line fasteners (also known as wire keychains). Print Settings 1mm layer height Tested with PCCF…
For the most detail, the thinner the layer height the better. I print the base layers at 0.1 mm and the elevation at 0.05 mm. Monza does not have a lot of elevation change throught the track even with 3:1 elevation exageration.
A parametric model for elevating a shelf so my robot can clean below it
My ThinkPad Yoga has only a few millimeter to the top of the desk, so it needs a lot of cooling. I created two simple elevation-blocks for it, which are connected with a 3mm bungee cord. your notebook can be up to 10mm thick. Lenovo X1…
Height 60mm (exactly 61mm) for the Ikea Lack case. The cable hole is 10mm. The space for the wall are 3mm. You can use other pieces of plexiglass or hardboard (I'll use the hardboard from my plexiglass package) and paint it. It's not…
3D model designed by Sedowynt using Autodesk Fusion (360) Personal License. This model was designed to be a replacement for the original phone holder that came with Elevation Fitness treadmills. The holder was enlarged to facilitate it's…
Hello, Today I have for you the Optics/Rifle Scope Elevation 20x25 v2 profile. It is used to elevate optics, rifle scopes for Airsoft, paintball or other replica weapons. It holds nicely on a RIS sheet with a width of 21-22mm. I used…
Wanted to put my wodden shelf in the cellar a bit higher. Made these elevation for it. Front and back is a bit different so I made two versions. Also needs to be mirrored to print for each side one. Best printed in PETG, ABS oder ASA.
2C Desk Stand A very minimal stand to hold the Hubitat Elevation hub (C5 or C7) in a vertical position on a desk or shelf. Edit: Added version with two screw holes 110mm apart. No supports needed. Print as pictured. LED Reflector
Story: I wanted a higher desk without buying a new one. Therefore, I have designed table / desk elevation feet for different desks/tables. I will probably add new models over time :) No supports needed! I have used PETG , but you can also…
This is an elevation map of G&J Kartway as I scanned it in 2024 for my models I've made for Assetto Corsa and Kart Racing Pro. Its vertical scale is exaggerated by a factor of 10 for clarity. You can download the game addons here: Kart…
A simple to print insert for an Elevation Mettle Field Quiver, that helps sorting arrows and makes the quiver more silent if you print it in TPU. To connect the three elements you can use cut down arrowshafts (.144 inch) or 5.5mm rods. I…
Tastatur erhöhung für die Cherry MX 10.0 N.
Recommended material is the TPU flex Please check if the angle of the drying rack foot are compatible (normally they have the same angle)
I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…
This simple part can help you quickly determine if a small change in elevation on a walkway is ASTM F1637, building code, or ADA compliant. Changes in elevation on walking surfaces cannot exceed a quarter inch or a half inch if it is…
Replacement pinion gear for the Durst M670 enlarger's column elevation mechanism. This nylon/plastic pinion meshes with the toothed rack on the column to raise and lower the enlarger head via a rack-and-pinion drive. The bore dimensions…
an elevated polyhedron inspired by Leonardo da Vinci Category: Math Art
Overview In the context of a project at the MakerSpace of UniLaSalle Amiens, we designed, prototyped, and built a mini siege machine intended to take part in a game where the goal is to score as many points as possible by aiming at…
an elevated dodecahedron inspired by Leonardo da Vinci Category: Math Art
![Sovol SV-06 Reinforced Y-Axis Components (+7mm Elevation) [LM8UU Set]](https://media.printables.com/media/prints/727854/images/6385196_83479a1d-618a-4456-956d-4c8a23418ad7_6dcc93ad-97be-4526-b501-dcebaeabd34b/20240303_143619.jpg)
