Liczymy pasujące modele…
This Print-in-Place model of the famous Japanese offroader Suzuki Jimny is my second Print-in-Place vehicle with working suspension! The wheels spin too! The only thing you have to do after printing is to snip off a few tiny pillars that…
Wydruk około 13,38 €–16,35 € nettoWstępna wycena jednego wariantu
Next model in the kit car series, this time it's a Jimny kit. The car once again has all wheels fully suspended. Assembly video: here
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Cup holder for a JB74 Suzuki Jimny. It mounts in front of the air vent on the drivers side (RHD model). Mounts with one M8x 25mm allen head bolt. Simply remove the stock cover “bolt" and screw in the real bolt. Printed upside down with…
There are three models here. Two of them are just emblems. The other one is a keychain. If you want to print these in two different colours as I did in this render, and you don't have dual extruders and need to do a filament change, keep…
Jimny Front Speaker Spacer for 5.25 inch Spacers. 2018+ Gen4 model Jimny Printed in PETG 0.2mm Layer Height 3 walls 40% Infill
The material should be ABS.
I've created a V2 that has a better design and left and right sides. https://www.printables.com/model/451844-suzuki-jimny-cup-holder-v2 Cup holder for a JB74 Suzuki Jimny. It mounts in front of the air vent on the drivers side (RHD…
IMPORTANT : If you aren't at least 6", preferably 6"2, this is not for you. Or if you drive like Fast and Furious, that will do. It was designed based on my height and how far back my seat is, the design is as it is. NON COMMERCIAL USE :…
Jimny Rear Speaker Adapter for JBL GTO 609C 2018+ Gen4 model Jimny Printed in PETG 0.2mm Layer Height 3 walls 40% Infill
Tapacubo para suzuki Jimny, diametro de sujeción: 108mm
Should be printed in ABS or ASA as otherwise PLA or PETG will warp in heat. Fits on with some double sided tape
Vit Budina makes wonderful print-in-place models of trucks and cars: https://www.printables.com/@VitBudina/models even more for money at https://cults3d.com/en/users/budinavit/3d-models Some of them are well-made replicas of real cars,…
Please read the following warning before downloading: This print could pose a hazard in an accident. It introduces a hard-plastic object into an area where you or your passengers may come into contact during adverse events. My Jimny has…
Place fenders on the body aligning their ends with the lower edge of the body. I used a bit a CA glue to hold it in place, then drilled wholes and added M2 bolts and nuts. I did not remove all the interior parts so in some places the nuts…
This bottle mount can be easily screwed into the existing threads with a metric pan head bolt. The bottle can conveniently be reached from the driver side. Use at your own risk, especially if you have passengers.
Printable brackets to store Suzuki Jimny 2019+ back seat headrests.
Jimny Suzuki Type J1 - J4 - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize/scale to adjust dimensions All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed…
I made a simple snorkel grill with a logo for my car (suzuki jimny). Stick the logo with glue. Maybe someone will like it ;)
A remix of GWA's well designed bracket to better fit the Pioneer TS-G1620F-2 6.5" speakers. This bracket is used to fit speakers in the rear of a 3-door JB74 Suzuki Jimny. Includes simple TPU gasket model.
This large cup holder was designed to hold large cups (Stanley) and to fit in the seat rail of a Gen 3 Suzuki Jimny
Jimny manual storage under the cigarette is somewhat disappointing, it is very small and feels like an afterthought. That is why I designed this, to fit 3 purposes: Make a better use of that space To hold my phone. Android Auto works like…
This model was made using an existing cup holder as reference and tested on a JA11. The divots on the bottom are meant to allow the console to sit flat as their are small ridges where it is meant to be installed. This model is not for…
Jimny Suzuki - Type J3/J3A Keychain - Portachiavi - Porte Clès - 钥匙链 -Schlüsselanhänger Resize to adjust dimension All trademarks, logos and brand names are the property of their respective owners
This phone mount for the Suzuki Jimny JB74 is part of my ModMount (Modular Mount) system. This system comprises mounts, connectors and device holders. The mount is designed to fit using one of the existing fixture holes along the dash…
Hook to mount on the Jimny (commercial) partition grid Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 25% Filament: Prusament PLA galaxy silver Category: Automotive
Front spacers to mount 130 mm speakers on Suzuki Jimny. Personally I printed them in ASA but they can easily be printed in PLA/PETG.
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings Notes: I recommend to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
Greetings, thanks for looking at my model. 01.11.2026 UPD - Add full body cupholder. I scanned the cup holders on the Suzuki Jimny, did some re-engineering, and decided to share this model with you. I'm just learning how to work with…
Rear hub caps for a JA22W Suzuki JImny. There is an optional inlay for letters and out circle if you want to do a multicolor print. Highly recommend printing these out of ASA to withhold to the heat and UV.
Jimny hub center cap for spare wheel (you can change the logo color in the layer n. 203)
Jimny Rear Speaker Adapter for 5.25'' 2018+ Gen4 model Jimny I used some Audiobahn As5.25i speakers, most 5.25'' speakers should work, but let me know if it does not. I used some screws with polymer ends to secure the screws and prevent…
A bigger Drawer for the Suzuki Jimny GJ/HJ. Print with PETG or better.
Suzuki Jimny Type J2/J2A - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If…
I was inspired by other keychain so I modeled this keychain.
German below Cover for the opening leaver for the rear door of a Suzuki Jimny FJ, with or without a oval cutout to acess the lever, in either 1,5 or 2,5 mm thickness. Remove the factory plugs from the square holes and just push the cover…
Holder for 17 mm sphere phone holder. A M8 screw is required for mounting the arm. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 20 Filament: Noname PETG grey Category:…
A holder for the Jimny tool by IFIXIT for the skadis system. Print it with the hook facing down and use supports.
Tweeter pods made to fit along the sides of the dashboard. Some sanding will be required on the left pod to get a perfect fit. Additionally the tweeter holes could be adjusted to fit different tweeter sizes.
Model used for embossing logo on dampened leather.
Introduction: Welcome to your next mini adventure! The Suzuki Jimny is an undisputed off-road icon, loved worldwide for its boxy charm, rugged reliability, and go-anywhere attitude. This 1:32 scale model captures the unmistakable spirit…
Recomiendo imprimir en material resistente a altas temperaturas ya que en verano el interior del vehículo alcanza temperaturas capaces de deformar el PLA. En mi caso he impreso con ASA. Espero que os sea de utilidad. Agradezco a GeorgeVWP…
Don't smoke, or need to keep random jingly coins in your 1998-2018 Jimny? Replace it with something useful! This simple mount replaces the stock ashtray mount, and includes two angled cleats for attaching your choice of accessories in the…
Jimny 3 cabin filter cover for 3d print.
Simple little hitch I designed for the Jimny. Hopefully the pictures are clear, but it is held by the 2 screws holding the rear bumper. I had the little ball socket screw thingie from the suspension linkage on an old RC car. Enjoy! Also…
Add In-Dash GPS Navigation to your Suzuki Jimny. Simply remove the passenger airbag, print and replace with this cover. Full details on Instructables | http://www.instructables.com/id/3D-Printed-In-Dash-GPS-Navigation-Raspberry-Pi-3/ I…
Need to find a place to mount your UHF radio? Why not replace the unused and ugly ash tray down the bottom of your center console. This model attaches to the Oricom UHF310 Micro 5 watt radio, and has angled cleats to attach to a printed “…
Spacers for installing 5.25 (13 cm) speakers in the doors of a Suzuki Jimny Gen4 (JB74/JB64) with a water visor.
ifixit jimny holder for honeycomb wall storage
Please find this on Makerworld: https://makerworld.com/en/models/417835#profileId-320285
Tired of the deep, cluttered "black hole" that is the Jimny glove box? This custom-designed organizer transforms that space into a functional storage system, making it easy to find your registration, sunglasses, charging cables, and…
This is the rear scan of a 1988 Suzuki Samurai. Should be the same as a Jimny and a Sierra. I took this to design a bumper for it, and it should work for other needs as well. If you design something cool with it, share a pic!
the tight pass between the top and the bottom should provide a fine grind.
Clip for 25mm flashlight to mount on the Jimny (commercial) partition grid Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 25% Filament: Prusament PLA galaxy silver Category:…
Ring Eyelet to mount on the Jimny (commercial) partition grid Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 25% Filament: Prusament PLA galaxy silver Category: Automotive
I remixed this model so it can be printed with less supports than the original. To assemble the model, you will need to glue each part together. The small square hole in the wheels is off-center and should be facing downward. To attach…
This is 3d model of a Suzuki jimny sz5. Print with sold infill or more perimeters for strength.
For one Window you need: 2x window_frame_straight piece 4x window_frame_corner piece magnets: 24x round magnets, 6mm diameter, 2mm height (use a stack of two at every insert) OR 12x round magnets, 6mm diameter, 4mm height fabric of your…
Roof Rack for MST Jimny J3 body shell. Its designed for a specific LED bar you can get on amazon or any 100mm width led bar. Take a look at the pictures For mounting you only need some zip ties
Suzuki Jimny 2019 with tracks instead of wheels. Uses two N20 gear motors to power it. Track can either be printed directly (in TPU) or the molds can be printed and the tracks made from silicone. It may fit standard lego tracks, but I…
A scan of the bed area of a Sj413. The poor thing is a bit hammered but its what I have to scan so I scanned it! It should help you design some stuff to bolt into the rear. Its a early 1988 samurai, should be the same as a Jimny and…
The JB43 Suzuki Jimny has a switch in the 4x4 system, part no 37680-76J01. The switch itself is fine, but the design of the wires is quite poor: no strain relief (wires enter the switch directly and are only secured with a drop of resin)…
You may need to resize the hole for the boost gauge depending on your needs.
The original steering from the model is very wobbly. So I made a on axle servo mount. You additionally need: 4x hex nuts M3 6x Screw M3 x 10 1x threaded rod M3 x 60 Printed with pla, 0,2mm layer hight and 50% infill. The hex nuts are…
Spacer for mounting items like a fire extinguisher with the M6 accessory holes. You will need 75mm M6 screws and M6 washers to install.
Various models in different sizes. Print what you like or change it to your personel keychain. Category: Keychains
Suzuki K6A Clutch Alignment Tool modeled for a JA22W Jimny. Printed with 3 walls and 10% infill out of PLA+. Outer diameter: 19mm Teeth: 18
Esto es una modificación de las ruedas del modelo https://www.printables.com/model/211483-print-in-place-suzuki-jimny . Al imprimir el modelo siempre se me rompían las ruedas así que decidí rediseñarlas para que se puedan descargar a…
Ideal para poder personalizarlo y añadir otros tipos de interruptores necesarios en tu jimny, o simplemente tapar el hueco de una tapa perdida. Recomiendo imprimir en materiales resistentes al la temepratura.
Quite small and uses very little filament. Perfect to put on a key ring! Can scale as needed to suit whatever purpose you may have. I would typically use this model as a purge object in color changes as its just the right size to purge…
There are two variations: one with a round hole that I made for my specific camera, and the other one, so you could drill the hole for your own camera. The camera angle is 45°.
This is a scan of a Jimny or Samurai round vent dash, should be years 1986-early 1988. This is intended to be used to build a gauge pod for an EGT gauge, but I figured why not share the model too.
Adaptador para encajar en los huecos libres de la lado de las luces antiniebla el termómetro de el enlace que pongo abajo, por si el vendedor desaparece pongo fotos del mismo. Recomiendo imprimir con filamentos que aguanten las…
Just a simple hook for anything you want, like your keys or anything else. Maybe print it with more perimeters and a little more infill. Depends on the weight of the hooked thing. Write me a message if you want the .f3d files for it.
Rear wheel center caps for Suzuki Jimny
Support bracket to mount non-original Mud Flaps. For assembly you will need: 6 nuts and 6 m5 bolts. I bought these:…
JA22W Suzuki Jimny vent retainer clips to replace missing or broken clips.
So after getting annoyed with the look of the broken antenna and not wanting or needing the antenna I designed and printed a cover that makes use of the original rubber seal, this model also hides the screws a bit more so that things…
Rear bulkhead hook for suzuki jimny JB74 commercial vehicle
This Suzuki Jimny Mini Z Travel Case can carry a Suzuki Jimny Mini Z, A rechargeable battery charger holder, and a spare compartment. It is recommended to print this in TPU to get some shock absorption It is recommended to have 8 rubber…
PARAR EN LA CAPA 25 PARA PONER LA LLAVE EN SU SITIO Y REANUDAR LA IMPRESION. UNA VEZ IMPRESO SE PUEDE PONER EL CHIP SIN PROBLEMAS. RECOMINEDO UTILIZAR MATERIAL RESISTENTES EN MI CASO HE UTILIZADO ASA. EN MI CASO HE UTILIZADO RELLENO DE…
Snap fits to the roof. The rails and platform are separate so you don't need supports (or at least I didn't). Super glue the platform to the rails and you're good to go. It hangs on strong enough for me to lift the truck by it. I've…
Hazard lights switch for 1998 Suzuki Jimny. This switch works exacly the same as the original one. You can choose between version with hazard lights symbol and with no symbol, you can even design it to your desire with Fusion 360 .f3d…
A spare wheel mount for MST Jimny J3 body shell. You need 4pcs M3x10mm countersunk screws and 4 locknuts. You also need a M4 threaded insert and a M4x10mm screw for the spare wheel
I lost the rear door bump stop for one of my Jimnys, and the door just started rattling. This part fixed it completely. TESTED
This is a remix of Vit Budina's Suzuki Jimny that I made into a dragster.
Enlarged pocket for replacement ETC Suzuki Jimny JB74/64
After I relocated the servo on the axle, there was a good place to mount the esc. So I made a plate, which can be mounted at the place where the servo was. To fix the plate on the original servo holder, the original screws for the servo…
Replaced ETC 2.0 road toll collection module with usable pocket when car is being used outside of Japan Have it printed in PETG, or even better in ASA. Remove original ETC card reader and replace it with printed pocket. Test fit done for…
So during a bit of maintenance I managed to break the original bracket clips, this made me think I should create a new and better version of this part. To make it as strong as possible I printed the brackets separately from the main part…
This is a prototype of the Rhino logo for the Jimny, the tail is very thin so beware of printing fails Print it in TPU or PLA
The amplifier is attached to the bracket using M3 bolts. I secured the top of the bracket to the factory stud with an M6 nut, and for the bottom, I designed and created a part that mimics the original clip.
With the original batterytray from cen, the center of gravity is to high and the car rolls over in corners. I designed a batterytray, which can be mounted between the rear wheels in the chassis. The batterytray is for batteries with…
Tired of the deep, cluttered "black hole" that is the Jimny glove box? This custom-designed organizer transforms that space into a functional storage system, making it easy to find your registration, sunglasses, charging cables, and…
Suzuki Samurai Jimny Wall Art; can be scaled easily and can be hung or stand alone. I also take requests If you like and enjoy it, feel free to rate/boost (it really helps)
