Liczymy pasujące modele…
*** Free to print, NOT to sell *** For Commercial Rights, you must join my Club. WHAT IS IT A travel version of a marble boardgame. The games I have seen that use this board are Carbles, Aggrevation, Trouble, the Marble Game, Wahoo, and…
30. Jan. 2024 v1.9: New examples of scripts with variables, ranges and random values. 16. Okt. 2023, V1.8: Fewer parts and bolts, combined parts to a new socket base Larger holes for servo cables added (less jamming, larger motion range)…
Available in two sizes: 40 and 30 mm. Have a look at my other decision dice: https://www.printables.com/de/social/256636-seemomster/collections/164613
Print with TPU or some other flex/semiflex material. Go slow with logo, or preferably print the nologo -version without the nitty gritty small details. Test fit showed a good tight,but not too tight fit. edit: 9.3.2018 - added a version…
This is a replacement paddle for Basilisk Ultimate, maybe also V2. Only tested on Ultimate so try at your own risk (it only uses little material anyways). Not super accurate but it does work. May need some trimming after printing to fit.…
This is PETG, but PLA should be great as well, use stiffer filament for the bolts. TPU for the straps, or if you don't do TPU, rubber bands, Velcro straps, etc. Designed to fit a Samsung with a case, but should adjust to fit most newer…
As they are wont to do, the knob on my dryer broke! The design is pretty weak, so I made a stronger and more stylish one! It will fit on Most GE dryers that have a 6mm diameter knob shaft. (the ones that have a cut out on one side of the…
Small stand for Unifi wifi 6 lite accesspoint for vertical (temporary) placement. simply use pair (or 4) nuts&bolts to assemble
works great on my iphone 14 pro spigen case, and might work on others too, most likely cases made around the same time. print on highest quality, normal supports, and it's recommended to use adhesion. it is not recommended to eat the…
Used the parametric Fusion 360 file from TheSameNameTwice, 80 x 160 x 25mm inside. Tweaked a couple chamfers for ease of use, as this box is so shallow, it flexes a bit less. Updated: With a gasket that actually fits, should be made out…
Modified Stuartc 's Balance Bike Stand to be used without any hardware. His model calls for four M6x30 capscrews and nuts. Since I don't typically have that large of bolts on hand I added 10mm thick pegs for the base stands that will slot…
Disclaimer: Your truck may have noise in this area that is from something entirely different. This worked for me, but may not make a difference for you. Yet again I'm sharing something I made, in case someone finds it useful. Over the…
This is a dryer knob I made when i broke original one. Told the wife I was gonna make one and she scoffed and said “your 3d printer cant print anything that strong, it will break the first time I use it”…. Well that's not gonna fly around…
For use on grass and gravel. Might not work so well on asphalt. The bigger diameter (~90mm) is useful in taller grass. If you prefer the underside of the printed part to be on the outside/inside (maybe because you use a textured…
This is a holder for Miniware TS101 soldering iron. It's meant to be a pretty tight fit, that's still easy to use (insert and remove iron). I'm using the provided finger shield, that this socket is made to accomodate, but TS101 or other…
Update 11.12.2024 see below! This is an adapter for the Ender 5 Plus with BLTouch positioned at the left or right side or behind with space for the toolboard. The duct and fan are located in behind of the mounting plate in the last…
This is the next iteration of my attempt to make the best universal phone holder for controllers. Inspired by newer Hall-effect controllers like the 8BitDo Ultimate 2, I wanted to make a design to fit that, and ensure that it is easier to…
I was asked by a friend to make this gear. I created this model from the broken gear, so I don't know anything about where this is located or how to replace it. It may fit other Spirit Halloween products. I was told that the gear worked,…
For use on porbably every terrain. I still have to test them myself. If you prefer the underside of the printed part to be on the outside/inside of the TPU parts (maybe because you use a textured printbed), feel free to mirror the…
Since i had issues with the available options, bending wedges or clips.. needing slm printed parts to use the higher tensions you can run with monolith... i decided to design my own clips fully printed that can take the higher tensions!…
Cube of Decision (Yes/No/Maybe)
A dice that says Yes, No, and Maybe.
This 3D model is a practical accessory for the Ender 3 series 3D printers. It transforms the motherboard housing into a drawer-like structure for easy access. The design places the other side on top, allowing the motherboard to be…
For use on sand (beaches). Might not work so well on other terrain. The bigger diameter (~90mm) gives more room for speed and should work better with bumps. The hexagonal hole is a tight fit depending on your printer tuning. Front wheel…
This is an adapter to allow a 20v Aldi 'Activ Energy' to connect to other power tools. I have made the battery connector part which can be screwed (with the original screws from the original battery in my case) The adapters v1 and v2…
I thought every toothpaste should get a nozzle like a 3d printer. So I designed this simple screw on nozzle for toothpaste tubes: I was horrified, that it seems like every toothpaste brand uses it's own threads, so this might not fit on…
This is a remix of Mr_3D BMW phone holder. The original is designed for a different phone holder. In addition, I wanted it to be modular. The ball joint is standard - 17 mm in diameter. It was designed for an F10, it was also tested in a…
1st layer test for ELEGOO CC2 maybe CC1 too Feel free to test
If you find my designs useful, please consider sending a tip I recently mounted my GeForce RTX 3080 vertically in my Corsair iCUE 4000X case using the Linkup PCI-E 4.0 Riser Support cable but I was concerned about how much the Riser's PCB…
This is a Yes/No/Maybe button, based on the BY8301 audio board. Buttons are included with the Y/M/N letters either engraved 0.4mm into the top for single color printing, or with a second part for two color printing. A blank button is also…
This is what you need! The Mood Meter. Knowing another person's state of mind can be very beneficial. When you ask the boss for a raise or when you ask for help and so on. Just kidding, please don't take it too seriously :) Print it how…
anycubic kobra go noise supression feet (maybe is compatible with other kobra models) add a little 3d printed damper i printed mine with 2 wall on 0.6 nozzle , works very well i only hear now the cooling fan (i will change)
2025 (Maybe others) MagSafe Phone Holder for center console
Modeled this to replace my broken shelf, hopefully it helps someone else. This is a big part so it's split into two parts (each part takes up the full bed on the MK4). I've used NeedItMakeIt's great joint design to join both parts, it's…
These are LOP spacers for PH3 rifles. Untested with Element, but research suggests they have a similar pattern to PH2/PH3's. Three Sizes to offer: .25 in (Use 1/4-20 X 1.00" Hex screws) .50 in (Use 1/4-20 X 1.25" Hex screws) .75 in (Use…
Aneng 620 multimeter holder for honeycomb storage wall (maybe aneng 681 and others) it will fit a multimeter with dimensions at bottom 22mm x 75mm
Just a simple Wyze v4 (Maybe others?) camera mount, with a 30mm riser to see above the bed. I didn't have any bar magnets handy, so used some 20mm round magnets. I'm assuming that you're keeping the adjustment legs on the camera so you…
My bosch 6th series vacuum main brush has snapped. The part that allows it to rotate broke. I included the f3d file in case you want to make some improvements. I did my best to create some placeholders of some of the parts. The V1 had to…
This is an iPad holder for the MODX M6, apparenlty it may work with larger M7/M8 models but I'm not certain? It uses the screw indent/holes on the back of the keyboard to clamp onto. The holder clamps on by pressure and uses a separate…
Lost the cap for your mini bike , bicycle , or cycle hand pump? This 3D printed replacement cap is designed to fit mini pumps sold under the Comus and Beto brands — popular among cyclists worldwide. It may work with other brand names too…
A few months ago I damaged one of my PCBite SP200 probes. So i had to repair them. When i saw today those protective sleeve i thought lets print one of those. Unfortunately it didn't fit the SP200. So I designed a new one i started from…
Print in place no screws make sure it fits your cans and pull the can strait out don't bend it up i press my thumbs in the front of the holder. Perfect for rattle cans so you don't get paint on your hands.
A replacement center cap for a Moyu Weilong v10 10AI or V11 cube. Magic 3x3x3 cube. Think Rubik's Cube. It may work with other Moyu cubes. Allows full reverse corner cutting. Snaps into place though not as well as the factory version. The…
[Unofficial] LowRider v4 dust shoe modified to: allow two-wrench method of tool change AND work with Kobalt router (maybe also Makita) Posting at request of a V1E forum member! NOTE: some of the pics are of a TEST print just to check for…
I designed this (and other stuff) because everyone in my family wanted their own soap holder. It has an inside diameter of 26 mm and clamps onto the pipe of a shower fitting called Pharo. I don't know what diameter other shower rods are,…
I made this simple mount to attach the Busch & Müller IQ-X light just under the rack of the Omnium Mini-Max. I only have the Mini-Max, so I couldn't test this mount on the Omnium Cargo. Please tell me and/or comment is this also works on…
This mount extends the maximum camera distance of the Andonstar AD407/AD409 microscope camera for more overview when soldering. The minimum distance (=maximum magnification) can still (almost) be reached by lowering the arm to the closest…
remixe for all raspberry pi
GINGER - BOBS BURGERS - WALL ART
I own a Meopta Flexaret Va camera. This camera takes push on filters. I just have a yellow one and a close up adapters. On my rangefinder camera, I use a Leica Thread Mount Voigtländer Color Skopar 35mm 2.5 lens that takes 39mm filters. I…
Geeetech A10 Cover for the Power Supply to mount a 92 mm cooling fan. This may also fit on an Ender 3, but you have to check that beforehand. Warning: Opening a Power Supply is very dangerous. So don't open it if you don't know exactly…
Magnetic box for the Maybesta lightning microphones. Since these microphones don't come with a box and having them in the original packaging is uncomfortable. Decided to make one. Print in place! Link to microphone: https://a.co/d/jag9trB
Just a little cube to play around, if you speak german or to prank people that don't speak german.
This is a replacement for the Plastic clip on the Window of a Daihatsu Sirion M1 (and maybe Cuore). It uses the screw and nut of the original part. You need to break free the special nut from the old original part. There are two of those…
Wanted to make something using heat set inserts so I tried with this simple thing. I printed in PETG+ 0.6mm Nozzle, 0.30LH since I had extra filament around, probably fine in whatever. Inventory: Clock movement: (…
Replacement Cap for the Maybelline Löscher concealer
To make this you need two spade connectors. I crimp them onto the wire and afterwards solder them. Also i press them flat to fit into the connector mount. To mount the connector you need two M3 square nuts and two M3x10 screws. The M18…
Print instr. same as nadirs ID 18.5mm ----------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)
Hopper bung / side breech cover for the Valken CQMF, may also fit the M5 from Milsig, but I dont have one to check. Category: Sport & Outdoors
Pretty simple thing really. I had a knob break on my grill, and I doubted that glue alone would work especially in the winter time when the valves are stiff to turn, so I designed and printed this sleeve. I put the broken part of the body…
Is it a fall thing? Sure, why not. I was trying to make an interesting pattern. I didn’t like where it was going and was going to trash it, but I decided to post it here in case anyone wanted it.
I purchased a RolandF140R and needed a place to put my sheet music books when not in use. They were all over the floor until I realized I had a 3d printer and a dream. Please enjoy!
I always wanted to make one of those neat 3d-printable objects that spells one thing when viewed from the side and another thing when viewed from the top. It turns out, this is pretty trivial to do in OpenSCAD (and I kludged the width of…
Please Like and Download
BA BF and maybe more battery hose clip. Modelled based on the original by Ford Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 80 Filament: FormFutura rPET Category: Automotive
This is a mug Ive made from Starfield that says CONTAINS COFFEE. MAYBE. I see 3 different mugs in a shop while playing and thought it was funny so I made them as a pen pot. If you would like to sell these you can get the License via my…
This was made because I'm too lazy to manually cut a hole into a freshly-printed thing :P (I'm not sure if this works with the Ender-3 V3 KE. I don't own that one, I only own the SE. Even then this is NOT tested because I don't have any…
So i noticed that yuo guyslikes the airless ping pong ball so heres a bigger version a socceer balll
This is a replacement rear seat retractor cover for the BA and BF Falcon. First I would like to thank RPM Engineering for thee stunning work in designing this for me from the original (broken) part. rpmengineerings.com Print Settings…
Made a backplate for the Fellow Ode 2 (might fit the 1st gen Ode). The model allows use of the original hardware. The step is removed from the original Fellow design. A holder for the Fellow brush and Aeropress scoop have been…
Shelf for three Maybelline mascaras
The Inter-tech 2U-20240 case did not come with a matching bracket for my TFX power supply so I made this one instead. The model is made with onShape and can be found here if you want to change something:…
This is a basic screen and keyboard for Klipper (and maybe Marlin), for those who use Mainsail/Fluidd but would also like an inexpensive on-printer controller. You only need an SSD1306 OLED screen and 4 tactile buttons, wire, and Dupont…
Slots into place of the original footboard pilot, & includes dummy front coupler. It's based on the shape of a 900-series Kadee, so it should be perfectly compatible. Other than that, I don't have much to say! Installation Remove front…
printed and checked
a littele model of a ak47 can be uset to a key
Printed using Generic PLA on the Prusa Core One - no supports required. Balanced 0.2mm used and the ObXidian HF Nozzle. If supports are used it would be better to to use a different material with a multi color system.
My original "leather" earpads started disintegrating, so I got myself some of the custom aftermarket ones for like 6$ a set. I got the velvet ones and premium ones (leather + soft padding). They are extremely comfortable, but because of…
Little camera stabilizer in delta format you use the original camera frame... you only replace the upper part of camera holder on mjx bugs b3h and eachine ex2h the file gimbal mjx bug b3 pt2 need a support when you print i used 20% infill…
Adapts later Mercedes door jam switch p/n 001-545-87-14 (rectangular hole) to earlier cars that used p/n 000-821-15-52 (round hole). Yes, the round switch is still available, yes, the wiring connector is different. Later switches are…
Just a remix of the original by Ford Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 80 Filament: FormFutura rPET Category: Automotive
Handlebar clip for aftermarket gear indicator Made for Kawasaki ER-6N 2012 maybe useable at other models with 22mm handlebar … 100% infill PETG recommended Show me your makes !
I'd planned to hang with either knotted or a loop of 8mm rope, but switched to multiboard rails. If you wanna try the rope thing maybe glue the 2 parts together so they don't slide apart. Printed in Siddament PETG as he does tool coloured…
I made this by copying and rotating toruses. I left out an axis just because :) The central pillar is hollow (and not needed) to allow a string to be poked through. You don't have to, but it might be a good idea to sink the sphere into…
mini 12 port siren with rain box uses dc 130 motor (and yes this is my sth-10 rotor/stator because i was to lazy to make a new one)
Settle it with a roll: two dice with rock, paper and scissors on their faces (each sign twice), plus a YES / NO / MAYBE decision die. Roll the pair against a friend, or roll the third for a quick decision. The symbols are engraved, so you…
This allows mounting of dimmer switches to control the lights of an Airstream basecamp. The interior LED lights are too bright for many times. The Dimmers - Acegoo 12V Dimmer Assembly: (Sorry i didn't take pix) Remove faceplate (a knife…
Use two small screw m3, and one m4. Designed for two 12mm 5mW laser modules from aliexpress (cost ~1$). Select "line" variant, two lines - cross. Keep in mind, after setting focus, you should fix laser head, tape, hot glue, etc as you…
Self explanatory. Exhaust hanger for a 2004 GTO. Probably fits other cars as well.
Maybelline concealer cap 3D with edge inside to make it click and rounded top like original design. I printed it in Translucent PETG because the original cap is also Translucent. PLA would also work.
These handles are custom‑designed replacement or upgrade components for the Texas TG 500 (and likely compatible with other Texas models using the same handlebar and cable mechanism).
6x3mm Magnets. Step and Fusion files included. It's not my best work but it should be enough to tweak for other magnets up to about 12mm(diam). If you ask nicely I might modify it for you.
There is a “single” size with one lane and a big one for even more nozzles.
Print in place no screws make sure it fits your cans and pull the can strait out don't bend it up i press my thumbs in the front of the holder. Perfect for rattle cans so you don't get paint on your hands.
I have use PLA, 100% infill. You will need a magsafe ring compatible. The Diameter compatible for the ring is 56.35mm I'm leaving a assamble instruction video. https://youtube.com/shorts/uXcoJva9b94?feature=share This is the ring I'm…
3% sparse infill ,print flat side down, in supports set top z distance to .31 and bottom to .25 (default is .2 i think)
Original in yellow, my version in orange, I put some extra material in places where it shouldn't matter, and to make it a little tighter.
I wanted my filament sensor to fit below my extruder precisely. This mount let's it fit with a straight filament path on the 2020 rail. Print Settings Printer: HE3D K280 Rafts: No Supports: No Resolution: any Infill: 20-40% Post-Printing…
Original knob broke, so I made a replacement.
designed to grip a desk 35-40mm thick, with a mouse mat on the top surface and no give on the bottom (my desk is clad in stainless steel), and hold about 5-10 pounds. no guarantees for any other types or thicknesses of desk, nor anything…
![[Unofficial] LowRider v4 dust shoe modified to: allow two-wrench method of tool change AND work with Kobalt router (maybe also Makita)](https://media.printables.com/media/prints/643d038b-76b4-40b3-9330-7f955d3ceb6d/images/10616326_bbc2a22c-f105-4307-82c0-fcbe57513ffd_f5bb75a9-49a1-4677-addc-a44f62d30f5f/img_9430.jpeg)
