Liczymy pasujące modele…
Please be aware, that these types of knives are prohibited in Canada. This is a minor remix of the trunnions which now include printed threads. There are 2 versions of the trunnions available. One set which looks similar to the originals,…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 DUMMY 13 is ideal for posing. However, not only are the hips/shoulders difficult to print and have to fit perfectly…
Dustcover for the winwing URSA MINOR 32 Throttle Metal, 32 PAC Metal and 32 AGP Metal. Printed in TPU 95A to avoid scratches
This is part of our Order of Repentance Kickstarter project ! Subscribe before the campaign starts and get this model for free! https://bit.ly/-order-of-repentance Subscribe to the pre-launch page:…
Recommended printing orientation for the icosahedron is to lay it flat on one face and use manual support painting on any large highlighted surfaces. This avoids getting support material into the tiny holes. Users of Bambu Studio can load…
IMPORTANT PRINTING INFO Follow the screenshot for part orientations. No supports required for anything. The little block and gasket need to be printed twice each and from TPU For the gasket use 100% infill and “avoid crossing perimeters”…
Kudos to the original designer. This is a minor remix removing the divider in the 1's tokens, as the tokens with our game were a bit thicker and didn't quite fit with the sloped divider. I've included some g-code which can be used with…
Made a nozzle cap for a 16.9 oz Aquafina water bottle. The cap adheres to the PCF-26P thread standard (can be found here: https://www.bevtech.org/assets/Threadspecs/2072575\_tmp.pdf ). Prints well, as the bottom part of the threads…
Hello everyone, I bring you a project that I have done to host a spectacular clock and to enjoy it anywhere, in particular the work office. The model is practically 1:1, with some aesthetic changes, especially in the dial to use a mix…
This is a great model by @RoccosStuff. In some of his earlier models he used the spare metal pins for the lock bolts but chose to use 3d printed pins on this. I think the metal pins looks better and it is easier to print the rack that way…
Mod of the TradRack Binky selector to have both a gate switch and an encoder
Minor corrections to fix spokes and holes, increase capabilities, use built-in PI constant, typos, keyway location Category: Engineering
Minor remix of Micro Center's Updated JST Connector Pliers. I made the head a bit narrower, and added a wedged bite. I printed it on my Bambu Labs X1 Carbon, with Bambu Labs Clear Black PC filament, using a 0.4mm nozzle, and the default…
Remixed the mounting hardware from the Thrustmaster model and adapted it for the WinWing Ursa Minor Airliner stick Made a little shorter in the Y axis to fit on my 230x230 print bed. Filled the original holes that aligned for the…
Please note slightly updated stl file - see below for details. Featherboard for Router I've had a Rutlands router table for quite a few years now.…
Ursa Maior & Ursa Minor constellations Keychain. If you print it in one color, it looks good. If you print it in two colors and use a natural or translucent filament as a base, when you illuminate it or place it in front of a light…
While printing ProfessorBoots truck I encountered some small issues which this remix fixes: A small hole would appear in the back of the headlight bowls when slicing in Bambu, I've added a small chamfer to the inside end of the headlight…
I had a mini scalpel blade/handle included with a kit of things but it snapped. Since I had made a custom space for it in some foam I found it hard to actually purchase another without buying multi-packs that came as disposable units. As…
if you enjoyed the half time show, you will love this. fits on most printers and prints in under 2 hours.
Remixed from Kai's snap on one piece handle, slightly lengthened the handle and added some guide text. Printed in PETG with 60% infill and 0.2 layer height. Filled with some plaster putty but still tidying it up… functional though!
Prints without supports. I ordered the following acrylic panels for mine, the model can accept up to 4mm deep panels, but I went with 3mm as it was more readily available: Dark tinted 3mm panels from cutmy.co.uk for approx £25 delivered -…
I have not been particularly happy with the Zimaboard mounting options out there until finding @MartinRowan's excellent modular 1U system . This remix was done to suit my specific needs, but I feel that some may be of use & worth sharing.…
Create your own, winwing ursa minor desk mount. Hardware required (for 1 stick holder): 4pcs: 20x20 aluminium profile corner brackets 4pcs: M5x10mm screws 8pcs: M5x8mm screws 5pcs: M5x12mm screws (2 for winwing, 3 for toggle clamp) 12pcs:…
Two customizable 3D Lissajous figures. Viewed from each side, the major triad model shows the ratios of the notes in a major triad: the root, the major third and the fifth. When played in tune, the frequencies of these notes will be in…
Follow original model's print instructions.
The original description hasn't changed. “designed this case to be able to hold standard, utility razor blades. The bump and indentation combination on the lid and base allow it to snap in place so it doesn't fall apart without prying.”…
Yet another organ key for my friend.
Adding a cylindrical portion without increasing the overall height to increase printability.
ChuckG's mod works brilliantly. It prevents the screws and springs from popping out, but it still allows easy adjustment and release of the screws. Unfortunately the STL has the decorative squares at 0.4mm deep instead of 0.2mm like the…
A wallmount for the Marshall Minor IV headphone case. You can use a screw or double sided adhesive tape to mount it on a flat surface. At the bottom there is an opening for the USB-C chraging port.
Modeled off of the DeRoy Auditorium on the campus of Wayne State University in Detroit, MI. Yamaski's best known work is the Twin Towers of the World Trade Center in New York. He was the architect of many buildings found in and around…
As an avid flight simmer with a physical disability, which greatly affects my finger and hand dexterity, it was difficult for me to advance and reduce the thrust levers in unison. This simple print clips over the thrust levers so that…
Its just a really small update for the chest frame and inner chest part, for a more stable connection, as I've found that it can sometimes be a little loose, which is conveniently also pretty annoying. Print as you would a normal D13. 1/2…
Simply adds opening for finger to lift items from below on the player trays with the cutout underneath. Uses less PLA and prints faster the main cow card holder
Tisk na dvě poloviny s podpěrami, Tryska 0,4, PLA.
I really liked the Adjustable Length Bead Loom by AArteLS , which is very similar to Rick's Beading Loom. It is almost perfect, except I did not have the same harware on hand. So I made few changes. I enlarged holes to accommodate 10mm…
More air flow, possibly. Category: Hobby
Dimension 50mmX30mmX30mm
The other handbrake button broke so I recreated it and added the Morris Minor logo to it. Printed at 100% infill
I had a fun weekend printing out the OP organiser by Rhindon. Looks great, and a lot of thought has gone into this. But once I sleeved the small cards (FFG Red - Mini European), they did not fit flat, so I took an edge off the holders in…
Refer to original clip-on storage project for more details. This model features minor adjustments to make it easier to print vertically without supports. (I rotated the angle of the hex nuts and added a draft on the adapter pocket.)
Tisk na dvě poloviny s podpěrami, tryska 0,4, PLA.
a dustover for the WINWING / WINCTRL URSA MINOR THROTTLE METAL, that utilizes the "screw(holes)" on the engine panel. Also easy to remove Printed in: 60% infill, grid, fast (0.3mm) Disclaimer: It maybe wont work with your printer, since…
Sorry if I spoil anything... If it's not clear what is being spoiled, then don't think about it and keep playing :) Made with Blender 4.1 I personally used some small magnets , but they are not mandatory of course. The relevant parts are…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Ursa Minor. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
Semi-enclosed case for the combination of Digilent Analog Discovery 3 and BNC Adapter board.
My granddaughters love the escalator and wanted a pink and purple version. With the first build, the stairs were slightly angled. Not sure why, that didn't make sense from the design, but when I slightly angled the non-drive side…
remodelled to avoid needing supports, print with a brim :) it is suitable for an m3 bolt or screw
This is a pretty simple design of the neckless that Nico Minoru wears throughout the show "Your Friendly Neighborhood Spider-Man " It is most likely a magical artifact that either is or will lead her to the "Staff of One," which is her…
The original by @SnowPig is already perfectly fit for purpose. I just was in the mood to make the minor cosmetic fixups that they mentioned it needed. I literally did this by carefully placing two boxes in Prusa Slicer and also exporting…
It took me a while but I finally got my water feature working - an excellent design by gzumwalt. This remix is not a million miles away from the original design - just two of the parts changed slightly. My version of the motor splash…
These spheroids are addons to a 1 in 10,000,000 scale model, all of them being either Trans-Neptunian Objects or Asteroids.
3D printed upgrade for new release Special Hobby kit in 1/72 scale model. For use you must cut along the panel line shown in picture and sand it flat. Dont forget to fill the necessary gaps. It is easy and very nice detail for your build.
3D printed upgrade for new release Special Hobby kit in 1/72 scale model. For use you must cut along the panel line shown in picture and sand it flat. Dont forget to fill the necessary gaps. It is easy and very nice detail for your build.
Get yours on https://www.rcgroups.com/forums/showthread.php?4223695-Rifter-Sabre-Scimitar-mini-sized-FPV-cruisers
All standard settings, no support or adhesion needed, it's Print In Place so print it, and use it!
Pressure fit to keep the top half of Shrine Luminor upright in travel cases. Locations for 3 5x2mm magnets
This was a great model that I just had to make a couple modifications to fit my needs. I am using these on my Anycubic Mono X and Mono X 6K printers. The nice thing with these printers (aside from being workhorses years later) is that…
This minor contribution might help anyone suffering sag from the side plate screw head counterbores. Thank you so much to @firstgizmo
⚾ Let's Go RockHounds! 🧡💙 Show off your love for the Midland RockHounds with this awesome 3D printed baseball keychain! Featuring the team's recognizable RockHounds mascot, bold lettering, and classic navy blue, orange, and white colors,…
Minor upgrades for Qumi Q6-BK pocket projector: -Projector Extension Legs for M2.5 screw -Projector Lens Cap for fi27,3 mm hole
Pec Knob A single contact point sized for pec minor. The knob concentrates load where a ball skates off the rib cage. TARGET AREA: pec minor, anterior shoulder SPECS - Size: 82 x 96 x 49 mm - Material: 119.8 cm3 - Solid-core print: it…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Ursa Minor. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
This is a few small adjustments to the excellent sculpt by Peter Farell, to help with printability and removing supports
Sorry if I spoil anything... If it's not clear what is being spoiled, then don't think about it and keep playing :) Made with Blender 4.1 I personally used some small magnets , but they are not mandatory of course. The relevant parts are…
A simple fuel filler cap for a Morris Minor 1000. The OpenSCAD file is provided
Na začátku 17. století nalezena socha Panny Marie Přicházení poutníků, vybudování dřevěné kaple Stavba chrámu začala r. 1740, r. 1759 byl vysvěcen a r. 1777 dokončen Roku 1877 vysvěcena křížová cesta kolem chrámu Roku 1999 povýšen papežem…
I found this design interesting and while printing it, I was making minor changes to fit my needs. Changes from the original: -resized to fit Smuk3D's brio system which also fit my wooden track -added 1 mm chamfers all over -modified the…
I used a 0.2mm layer height and scaled the models up to 280% i dont think any lower than 230% will work, it turned out sleek on my ender 3 v3 se.
i love the commander box, its a fun print to put together, but i saw a user experience issue (yep, i can be a bit slow sometimes :D ) and also wanted to try a different aesthetic for the top. all the rest of the files from the "Hex Lock…
This is a few small adjustments to the excellent sculpt by Peter Farell, to help with printability and removing supports
This is my first project I made to print on my 3D printer that I actually will use. Because of the round connection shape, it is possible to swivel your monitor some degrees to get it into a 100% horizontal position even if the wall part…
This is a remix of the fanless fancover in Paul Trautner's "Mellow SB2040 Stealthburner Cover" , with minor changes to help with printability. If you have problems with the original model, this may help, since some of the holes have been…
I wanted to be able to hang this on a a hook or pegboard in my garage. Also added a bevel to replace a small overhang. Checked the volume and weight on my kitchen scale, this will hold 4 oz, or 114 gms/mls, if filled to the very top. I…
Minor tweak of one of the 3 parts of the excellent Purge Bucket designed by shanghaisimon https://www.thingiverse.com/thing:4840264 . You will need to print the waste bin and bucket from his design - this is just a slightly truncated top…
https://marktsack.de/community/index.php?attachment/2290-bagpipes-plan-pentatonic-bagpipes-f-bflat-pdf/ 03.06.26: Model is no longer available.
Toyota 4 Cylinder Engine 22RE, Complete Working Model - remix with minor changes
