Liczymy pasujące modele…
Looking for a solution to reliably hookup CAN devices, fans, sensors and more to your beloved 🥰 VORON with a tiny bit of 😎 premium touch ? This custom skirt for CNLINKO LP12 (and compatible) connectors might be it! Why This Mod Exists…
This is a case I made for the ESP12F 4x relay board, like this one: https://www.banggood.com/AC-or-DC-Power-Supply-ESP8266-WIFI-Four-way-Relay-Module-ESP-12F-Development-Board-Secondary-Development-p-1794113.html It is designed to just…
From Wikipedia: "Pacific Truck & Trailer Limited was a Vancouver, Canada based manufacturer of heavy trucks famed for their durability. Pacific built both highway and off-road trucks, particularly for the logging industry, heavy haulers,…
I have not printed this model yet, I made it as a refrence model for another prodject. Hope you find a use for it.
This duct is designed to improve airflow in a Fractal Ridge case with a AXP120-X67 CPU cooler and a Noctua 120X15mm fan. It may work with other 120mm configurations that leave a gap of 6.3mm between the fan and the case.
A replacement tone arm rest lock clamp for AT-LP120-USB turntable from Audio Technica. The piece can easily be bought online from different suppliers but it can also be printed. I printed mine in PLA when the original broke. The…
Case / Enclosure for an ESP8266 / NodeMCU / ESP12-F Key Features: Accessible USB Port Prints without supports space for 3-5 wires no screws required, just click it together I'm using it for WLED Projects.
I wanted to eliminate an audible hum I was hearing from a couple of my P12s, so I designed this 2mm dampener. You could use these with any 120mm fan, of course, but the corners are cut to match the P12 series specifically. There are 2…
I accidentally threw away the hinges for my turntable's dust cover so I made these replacements. It was a bit expensive to buy 2 hinges online so I designed and printed these. I have at the AT-LP120 USB, but it should fit these models:…
I resized and adjusted the great model from @dewgenenny. It fits the 8x Relay board now, what I changed apart from the size was: replaced the guides to fit M3 screws and nuts (the nuts I fixed with superglue in place) Changed the holes to…
Small vibration damping pads to be printed in TPU that can be inserted in each corner of an Arctic P12 PC fan. Try some different amounts of infill to see what works best with your flavor of TPU. They clamp in place pretty well, but you…
Model of a fan duct/shroud/intake for the Thermalright AXP120-X67 Low Profile CPU cooler to have it intake no warm air from inside case and instead draw cool air from side. Requires no extra parts to mount by using the holes already in…
Noctua fans are fantastic, however, not very budget friendly. A very close competitor for PC case fans is Arctic, specifically, the Arctic P12. I happened to have these fans installed in my rig and decided i wanted to try out Noctua's…
A few years ago I ended up breaking the little clip that holds the tonearm on my Audio Technica AT-LP120 still. Eventually I got around to "designing" a replacement. Basically a direct copy of the original. I printed it solid from…
Accessories for MDF Prestige P129 skirting board manufactured in Poland and sold by Merkury Market. Includes: outer corner piece inner corner piece end caps connector Translations: Skirting board, Podlahová lišta, Soklová lišta, Listwa…
This case fits to adapter USB 2.0 to TTL UART 6P IN CP1204 STC PRGMR. Adapter is used to flash Tasmota into Sonoff (and other) IoT devices. https://arduino-shop.cz/arduino/1731-adapter-usb-2.0-na-ttl-uart-6pin-cp2104-stc-prgmr.html Print…
The Makigai MaiMai P126 is my favorite vehicle in Cyberpunk 2077, and I think it doesn't get nearly as much love as this tiny little guy deserves. So I modeled up a version for 3d printing, making sure it can still roll around. Now you…
TLDR Deshroud mod for the Ventus 3080/3080Ti/3090 in the Cooler Master NR200 case Fan shrouds designed to perfectly fit the Arctic P12 and bridge the gap between the fan and the GPU heatsink The Normal Fan Screws version of the fanshrouds…
Inspired by High-efficiency Noctua 120mm fan grill I am using ARCTIC P12 fans for their excellent price to performance for DIY projects and I need a fan grill so my fat fingers / my cables would not end up in the fan blades. I got…
Printed a external fan mount for Victron Multiplus II and wanted to secure the fans. (link to the fan mount: https://community.victronenergy.com/questions/191916/multiplus-ii-5000-fan-noise-fixed-for-me-without-l.html ) The fan guard fits…
Airsoft conversion kit for cyma 122 aep Almost finished. I will do some photos and conversion will be complete!!! Main goals of this project Make space for bigger battery and AEG size mosfet Turn pistol in to submachine gun Features of…
There are 2 variants of the ZP120 bracket here. I highly recommend the one with lugs. As well as making the mounting easier the extra material stiffens the mount nicely.
The Phomemo P12 Pro label printer has been great for aiding in my Gridfinity organisation. So I wanted to organise the tool which helped me organise. This model is a 3x2 Gridfinity bin which holds the Phomemo P12 Pro along with 2 label…
I broke my old screw and found drawings online. so I could recreate it . I printed this in ABS just it case it might get hot UPDATE: Michael_G printed this scaled down to 96% of original size and it fitted perfectly. So you can use this…
I have a lot of Ultralux LLVP1242 downlights at home. Every month I have to replace at least one or two of them, and it's gotten quite expensive (at 12-15 euro each), so I decided to convert them to regular GU10 LED bulbs. This model…
For use with Fiskars Pruning Shears (P121) . May fit others, but I have not tested any. I left the back of this model empty & clear to allow you to use your preferred mounting method. I am using this holder with a Gladiator…
3D-printed replacement part for Whirlpool air conditioner AP12DR2SFMS.FJ-01, diameter 150 mm. Designed as a repair part for a damaged or missing original coupler, restoring function without replacing the whole assembly. This model is…
Not sure if this will fit the other Powerdetect models. I read they're picky for some things. Printed in PLA. Should probably up the perimeter count if you bang this on things going under furniture. Requires two M3x16 screws and nuts, but…
Arm lock knob for turntable for Audiotechnica AT-LP120-USB
My first attempt do make a dust cover for my new rally car. Should stop some debris getting inside (hopefully) still to try in harsh conditions. printed in PLA Depending on your machine settings could need some little sanding to perfectly…
This is a simple Case for the 4channel relay boards with a esp8266/esp32: Models: https://templates.blakadder.com/ESP12F_Relay_X4.html / https://devices.esphome.io/devices/ESP-12F-Relay-X4…
Volvo Amazon P121 (1965) automatic steering column plastic covers 3D scanned Volvo Amazon P121 (1965) automatic steering column plastic covers. Need some cleanup as the scanned ones are a little distorted and have been repaired. Posting…
The breadboards are sized 165x56mm and 84x55mm. The dc/dc converter is this one: http://www.amazon.de/gp/product/B07XJWSWKT Breakout boards are these:…
simple case for ESP12F board with relay.... Print Settings Printer Brand: Prusa Printer: I3 MK3S Category: Electronics
Small cover for the ARCTIC P12 Pro FAN. It just looks better.
Alcatel-Lucent Enteprise mount kit for AP1101, AP12xx, AP13xx Indoor series. AP-MNT-W Category: Other
Legs printed with Inland PETG. Printed with Bambu Labs P1S.
This is an almost exact replica of the original hinge. You'll need a 3mm pin, a spring with a diameter of 8mm or less (the stiffer, the better - the original spring is very stiff), and any metal washer/spacer above the spring to create a…
Vinyl record / LP Records holder, so I have a easy place to put the record while playing it. Solidworks is provided for easy remix.
EN A simple spacer to stack two Arctic P12 max together. This increases the efficiency and power of the two fans. If they are mounted directly mounted together, there is too much turbulence. The central piece reduces turbulence between…
I used this flooring: https://www.amazon.com/dp/B0C65HXJX3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1 I was asked to provide drawings with dimensions. I have stencils that can be printed on 11x17 sheets, a dimensioned drawing…
I use 3 140mm bottom fans for intake on my PC and the case is great for that, but thee stock case feet cover a lot of the fans so I made this. The feet are 50mm tall allowing extra airflow and they have a built in air filter holder just…
Angle base for the AwithZ P90C/ P120D, keeps leads closer to work, and makes it much easier to see the screen and access settings. Based on a similar model from diy500amp.com Included is a 25degree angle (my preference), fusion360 design…
The original ESP-12E pogo pin programmer by GregFrost works very well. I added a small base for it as attached files. Fusion 360 file is included as well as the stl. If you need a STEP file let me know. Hope this helps someone.
Mount your Axis P12 series camera anywhere you need it… Under a shelf, inside the 3D printer enclosure, etc. Requires a single M3 screw and optional 12mm magnets Suggest printing in PETG
⚠ Based on : https://www.thingiverse.com/thing:4852969 Don't need screw, this model is tight fit. Optimize to avoid low-pitch noise. I wanted to make some protection for my Arctic Fan and make it look good. Perfect for cooling laptop &…
We needed to retrofit a Axis P12 Camera into an existing elevator enclosure which used a 40mm box camera like whats found in an ATM. This is my first real attempt at using printed threads, but they came out wonderfully. I put 3 positions…
These are bed fan mounts for the Voron Trident designed for the Arctic P12 Slim ( non-affiliate link ) with no loss of Z travel. The design allows for relatively easy installation and removal of the fans without removing the build plate.…
A dummy case that mimics the NP120 battery shape and connections. Fits perfectly.
A simple box I moideled to carry around the stylus of my Lenovo P12, because I don't really trust the little magnet on the back of the tablet to keep it in place when it's in my bag. You should be abble to adapt this model for other…
This design is intended to use the mounting hardware already on the Pelsee and the BMW mirror mount plate. To access those screws, you need to scrape off the 4 foam pieces on the back of the unit to access the screws. Then you unscrew…
Printed by Pursa mk3S+ Infill- 30%-100% Color- Any color Material- Pla/Tpu/Petg/Abs Amount- 16g
A simply drill and cutout template for the B&G Triton2 or Simrad OP12 autopilot controller. The template are wide enough to show the area used by the device included the suncover. Category: DIY
Have you any question? Please watch my video.
Needed more storage of my P12 tapes so i made this. The tape reels are fit press so they don't jump out. Inspired by this model with included space for the P12 printer by Phomemo. Print settings: Pretty much anything you like. No supports…
I wanted to put my new label maker on my Skadis boards on my workbench so I made this holder using some hooks. Print with supports for the hooks
Codename GabeStation3 This is my take on a small-ish case that allows for good cooling of the BC250. The dimensions are approx 325x113x186mm, which means it's a hair under 7L in volume. EDIT: I just realized I didn't make a back case to…
I always take off the dust cover completely when playing records and the original hinges fall off easily and snap into “open” position. I have not used them at all for this reason but that means dust cover moves around and doesn't stay in…
This is a replacement part for Corsair 120 mm fans SP120 and AF 120 (The ones I have were bought in 2013, I don't know if they kept the same design). These fans come with a rubber grommet that deteriorates over time, either because the…
fits LG LP1200DXR portable A/C systems old wheel had small finger attachments this uses a full hub for better support.
GP123 Great Power Engine ignition module mount for RC plane. Printed in PLA with supports.
Mein Schnellwechsel Werkzeughalter zu Prima Creator P 120 den ich zu einem Laser Gravierer umgebaut habe. Print Settings Printer brand: Anycubic Printer: Vyper Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50% Filament…
Я шукав повністю готову модель для проекту, але не знайшов, тому вибрав найкращу і мод
IKEA Skådis Holder for Phomemo P12 Label Printer | T Nut System This custom-designed holder is specifically made to securely store the Phomemo P12 label printer on an IKEA Skådis pegboard. The Phomemo P12 is a great choice for anyone…
DIN-Rail-Housing for ESP12F RELAY 2X This is a housing for the popular ESP12F Relay 2x. It is intended for attachment to DIN-Rails but since the rail-clips are printed separately it can be used stand alone as well. Additional parts part…
Since the Bowden connector used on these printer models are very prone to breaking, I designed this little clip that screws in to existing screws on the printer body. It will limit the range of movement of the filament feed tube, in an…
Corners designed to fit Attema P12 pipes at the size of 12x7mm
This is a mount for the Axis P1265 MkII camera mount inside the CORE One enclosure I prefer hardwired everything and less on the WiFi, Axis offers the P12 series as POE cameras with a small head, perfect for this application Suggest…
here the clips I use to hold the dust cover. just glued to the frame. you can find the cover here: https://www.printables.com/model/1364607-rlaarlo-xts-p12-dust-cover
Simple adapter that allows installation of label rolls for Aopick P12 on PRT Qutie mini.
Ring with square mandala grill for Corsair SP120 Fan Improved diameter size Category: Computer
Remix of lucas_sp12 's Samsung S24 TPU Case With Text Don't Panic Written In Large friendly Letters On It's Back I added fillets to the edge of the case and a strip over the side buttons and supports, which need to be clipped off before…
Weller DSX 80 Desoldering Iron and other Tube and cable Clip
Exhaust cap for Great Power GP 123 Engine to avoid oil dripping on the floor or other airplanes below (if staked on a shelf). Snug fit, add a "Remove before flight" ribbon for the final touch. Can be printed in PLA, then glue the parts…
Sorry for the bad pics, I will upload better ones later. front 1" risers have a round front for clamping a bar mount on. I use mine for my large minn kota remote and a thru hole for a lanyard. rear risers use PETG (8 perimeter walls and…
Easily mount the AXIS P12 series camera to the inside of the enclosure. Print with PETG for strength and heat resistance, supports may be necessary inside the camera mounting hole.
Global tomographic models of seismic velocity provide us with crucial information about the planet’s interior. Here, we represent S wave velocity variation such that slow velocities stand proud and fast velocities as depressions. To…
Multiboard mount for a Tripp Lite TLP128TTUSBB 12 Outlet Power Strip. You will need to print two of them. Printing Guidelines: I printed using standard Multiboard settings. Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill,…
Case for the Wondom 500W Boost Converter
Adapter to add a external power supply to the Grundig S-VS180
Holding the thing while cutting it was kinda weird, so this thing helps.
For use with Yuasa np12-12, when using battery for ham radio when doing POTA. Handle is a 22mm copper pipe, if sides are not snug enough, use tape in inside to get a good fit.
Adapter für die freie Einbauöffnung im Hubwagen, mit DC-DC Wandler auf 12V DDR-15L-12 Er schaltet bei Eingangspannungen unter 18V ab, Werkzeugakkus sollten also nie unter 50% entladen werden. Zusammenbau mit üblichen 3-3,5mm…
Grid for components in hermetic housing ZP120.80.60SUJ-IP67 TM ABSGrid for components in hermetic housing ZP120.80.60SUJ-IP67 TM ABS
High-performance PC fans often have hollow mounting brackets. When you tighten long screws onto a radiator, these brackets tend to bend or crack. These spacers provide the necessary rigidity, ensuring a solid mount and reducing vibration…
3d print out of TPU or another flex filament Glue the feet on using super glue or another glue of your choice. Lastly, for the glue to «grab» the TPU better, use textured build plate Enjoy!
Ring with simple grill for Corsair SP120 Fan Category: Computer
AwithZ P90C / P120D Angle Stand – Modular Accessories Remix This is my remix of the original AwithZ P90C / P120D Spot Welder Angle Stand . I really liked the original angled stand design, but wanted to add some practical storage and…
This is a mount for the Axis P1245 MkII camera mount inside the XL enclosure I prefer hardwired everything and less on the WiFi, Axis offers the P12 series as POE cameras with a small head, perfect for this application Suggest printing in…
The original back cover is made of PA6, most of the glues fall off.. and I needed magnetic holders on the drill. There is a 4 bit holder on the top, 5x2mm (4) magnets can be glued inside. 10x2mm (6) and 5x2mm (8) magnets needed and some…
Wallmount for P12 Label printer Uses two screws prints fine without supports
audio technica at lp1240 tonearm SCANN 3D
Keep your desk clean and elevate your setup by mounting your Sonos ZP120 (CONNECT:AMP) underneath any table, shelf, or desk. This design utilizes a sandwich clamp mechanism featuring four structural corner columns that clamp the amplifier…
This is a spacer that goes in between magnets when replacing old M57 magnets with neodymium magnets. Two are required.…
Hengs Ranghood cover JRP1205B.
High-performance PC fans often have hollow mounting brackets. When you tighten long screws onto a radiator, these brackets tend to bend or crack. These spacers provide the necessary rigidity, ensuring a solid mount and reducing vibration…
Small cover for the ARCTIC P12 Pro FAN. It just looks better.
