Liczymy pasujące modele…
These spacers are easy to print do not require supports or any glue. Don't have a 3d printer but still want these spacers? DE: https://www.megahobby-kugelbahn.de/ * Also want to sell my models? send me a message Updates 2-1-2023 Made the…
I had some spacing inside my drawer, so I remixed the incredible Gridfinity base grid with snap connections by Neel and created some spacers. If you can't find the spacing you need, please let me know, and I will upload the missing…
These spacers are easy to print do not require supports or any glue. They are a remix from Matthijz98 done in PrusaSlicer and reexported as STL. Since they fit tight with themselves and original tiles I wanted to have some smaller ones as…
These fan spacers can be used for 120mm and 140mm computer fans. Both fan size spacers come in three thicknesses: 10mm, 15mm and 25mm. The mounting holes are chamfered on one side and recessed on the other. See the second image for the…
4mm bed spacers for silicone bed mounts
Designing simple spacers is an often recurring simple task that is not very exciting. It is much more fun to write a program does my work for me, so that is what I did. My program has generated .stl files for all spacers that anyone will…
The V2 Models have tighter tolerances
Designed to allow for the use of the Specialized SL7 spacers/stem on the 2022 Allez Sprint. It transitions from the round headset to the SL7 spacers with cutouts for internal cable routing. I printed in PETG at .2mm layer height, 100%…
The pedal faces don't require the spacers and the spacers don't require the pedal faces. You can use either independently. Pedal Faces: * Less slippy than original pedals when playing in socks * Can be used with the original m4x8mm…
I had some spacing next to the gridfinity base plate inside my drawer, so I remixed the incredible Gridfinity base grid with snap connections by Neel and created some spacers. In this version, there is a half grid before the spacer. Maybe…
The Silicon Spacer mod is intended to help flatten/level the print bed by enabling you to vary the depth of each bed mounted screw in an effort to compensate for variations in manufacturing tolerances. Silicon Spacers found on Amazon…
These spacers are to help get the bed of the Ender 3 V3 KE (and SE) as flat as possible. These also have the spacer height on the OD to make it easier to identify if you print more than one or two. The 13mm spacer is used both in the…
This is for the NON NIVOMAT suspension! For further details, please refer to my work in progress, collaborative, P2 XC70 Lift Guide Here! (A PDF Version is also available under the files tab in case the link is broken) This should lift…
As I want to mount the Pegboard in a tight space (cabinet), I wanted to be a littlebit more sparse with the distance of the Pegboard from the Wall. I've simply separated the parts and added two additional Spacers (12mm & 10mm).
This base has 12mm taller outer walls and a 6mm deeper basin. Add stackable spacers to raise sections of of the fountain for more vertically interesting layouts. https://youtu.be/dAKaOwgOqy0 https://youtu.be/3PsxrwF2fdY Printing All parts…
Edit- print in petg 100% infill Hopefully this can help with somehow. Print settings 10% infill 1-3 walls print in petg if you are scared of them melting but I didn't.
A collection of spacers for the most common axial fan sizes. 120, 92, 80, 60, 40 and 30 mm The STL files have the spacer with a height of 100 mm, so you can use the Z-scale in the slicer to give it the exact height in millimeters that you…
Print Bed Spacers TPU Spacers to replace the springs on your print bed. These are the standard size for an Ender 3 at 16mm & 18mm heights TPU Shore hardness 95a .2 Layer height 100% Infill No supports If you like, like. Enjoy!
Dial your bed In. Parametric Shims work with your Stock Hard Spacers and Silicone spacers found on AliExpress or Amazon Premade Shims for Stock Factory Spacer and Silicone Spacer if you don't want or need to adjust the size. No worries…
A set of the most common bookbinding spacers used for off-set cutting of bookcloth and book board when binding or re-covering hardback books. Dimensions: height 5mm, length 254mm, widths are 20mm, 10mm, 7mm, 5mm, & 3mm. Spacers have…
Cable manage ethernet runs with some spacers I made. If you want more sizes just ask and I can upload them 👍 Currently Supported Sizes 5x2 5x2 -1 4x2 3x2 2x2 1x2 5x1 4x1 3x1 2x1
An all-in-(almost)-one solution to mounting your SKR Mini E3 v3 onto a DIN rail, while giving you the most headroom. I'd recommend a 40% infill of either line or grid pattern. It's a bit fiddly to install but if you put the m3 screws…
Simple circular spacers, 5 / 10 / 15 / 20 mm tall
Some Spacers / Gauges / Setup Blocks for woodworking. These are really useful when building cabinetry and other projects. In addition to the different thicknesses, all blocks have outer 1" x 2" dimensions so can be used as gauges for…
for a better anchoring of the spacers I have inserted 3x8 magnets. Mirror both parts for a set of four.
I designed these and have been using them in my shock since 2021 without issue. Print with 100% infill, you want to maximize the volume of plastic and avoid any hollow cavities in the printed part. I recommend a high-temperature material…
here are some bed spacers sized for my Elegoo Neptune 4. specs are: updated Jan 29th 13.4mm high 15mm wide 4.3mm hole print settings TPU 35mm/s speed .2mm depth 100% infill
The Freecad file is included if you need to make any changes. Printed in PLA. 0.2mm layers, 3 walls, 15% cubic infill. I uses a dozen installing a 12 ft x 15 ft floor.
UPD 13.05.24: Models of X-spacers have been corrected, Y-spacers have been added. Spacers in the X and Y axis are installed between the pressure plates and bushings, in case you want to get rid of the play that is felt if you shake the…
This is a Remix of Z3Darttech's glass top spacers that gives a bit more length to the front pieces thereby allowing for more support, especially when an AMS is on top. I wanted this type of simple low material spacer with magnets as well…
Round threaded spacers kit (M2, M3, M4, M5, M6, M8) If you need round threaded spacers with special thread, outer diameter and height parameters, please contact me and I will add them to the kit The round threaded spacers kit is designed…
Small spacers, two different sizes. Printed mine in ABS and it's been hassle free for three years. Excellent throttle control. Undo your throttle and pop them in. It's that easy.
These bed spacers were designed to be easily printed. You can print the spacers as singles or all together. The inner hole diameter is 4.25 mm, and each spacer is 8 mm wide. Two 16 mm spacers go on the right side (when viewing from the…
This is a simple part sized to go onto a Shimano-type freehub body underneath a 9sp cassette. The intended thickness is 1.85mm and the model includes a single tooth to engage the splines. I can create other versions of this if desired -…
This is a simple spacer I used to allow for manually tramming the Creality K1’s bed. and I greatly reduced my bed mesh variation to around 0.1. I have tested this for about seven months now. That includes printing ABS many times with a…
My wife was looking for a way to stack Multiple sheet pans in the Refrigerator for bagels. These stackers started out from a set from Heckler off Thingiverse but had to modify it to fit larger pans, they were made to fit Nordic wear, or…
24/12/22 : I updated to ver. 2.1. In addition, now supports a wider range of heights. 24/12/23 : I added “6legs +30mm” ver. ----- This spacer allows you to stack genuine GraviTrax tiles on top and create higher structures. Please note…
Upgrade your Nerf Hammershot's power to the right amount for you with these different-sized spring spacers. This model includes 4 different sizes of spring spacers: normal, half-size, ¾ size, and EXTRA STRENGTH!! (I don't know if this one…
Space dividers between spools in the Anycubic ACE Pro to reduce spool "flop" when the filament is low on the spool. Designed to fit snug and removable for wider spools and spool adapters. Can fit either vertical or horizontal as space…
Spacers for IKEA wooden train railways. If you connect correct all railways parts you don't need this but sometimes you want to be creative and feels lack of these spacers =). P.S. You can also found other my wooden train designs here:…
Please give it a ❤ if you like it 🥰 These adapters / spacers are going to allow you to make sure that your Z thread is perfectly aligned vertically. So you can avoid skipped steps for example :) The video where it is used : Print Settings…
I reverse engineered MDT buttsttock spacer. it is compatibile with original. Don't forget to reorient the model on the bed in a slicer. It is upside down by default. No supports, Enjoy.
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
These are the bed leveling parts. First I made a 2.stl model for all the posts and made a Z-offset. Then I calibrated and chose the right insert. Good luck
Tiles Leveler Spacers + clips Tool Kit - Kit per posa piastrelle --- files with Rev1 use slicer supports, other files cut off central supports --- Thickness: 1mm 1.5mm 2mm 2.5mm 3mm Resize to adjust dimension If you download/enjoyed this…
I was sick of having a -4mm+ Z-Offset on the Ender 3 S1 Pro, so designed these little spacers to raise the bed and stiffen up the spring tension. I have included a 3mm version and a 5mm version, so choose whichever suits your bed. These…
After a lot of work with @JaminCollins we are ready to release the cartographer for the K2 Plus! If you would like to support my efforts, buy me a beer . I want to keep my projects free, and your support helps me do so. Getting this all…
Simple spacers to increase the distance between NEMA 17 stepper motors and mounts.
Props to keep the lid ajar, providing airflow without the need of a riser. Piece follows contour of frame. Provides a 5mm opening.
Wanted a Spacer for the X52 that did not touch the inner spring of my X52 Pro. Blechimmers version was the only one that did that for me, but it was a bit soft so I remade it in a few different sizes: 0.5mm 1.0mm(same as Blecheimers)…
Bumper contacts get bent from hard use or being dropped. Print these, pop the top on controller and install. These are approx. 6mmx7mmx2.7mm thick. I printed in PLA+, 100%infill, with 8mm brim for good bed adhesion. 6 minute print
Flsun Super Racer SR Feets for more stability 🦾 The model is 3 mm high but you can increase or decrease the height easily in you slicer. Used in this video:
M3 spacers (4.5mm OD, 3.2mm ID) with heights of 1.00, 1.25, 1.50, 1.75, and 2.00mm. Print instructions I used these on my Lulzbot Mini 1.03 (silver plate, vs black) with the Modular Bed accessory (…
Use this tool to install click together vinyl plank flooring, specifically Mohawk from Costco. Use a 0.4mm nozzle because of the sharp corners and detail needed. If you use a larger nozzle, the sharp cutbacks will peel when printing, or…
simple Spacers to Adjust the height of your Cr Touch Probe. Multiple Sizes, Just Add them together to build up the height you need. Or you can just adjust the Height in your slicer.
Stealing Noctua's quiet airflow mod - Shroud for 120mm and 140mm fans When fan blades spin too close to a PC case panel, turbulence builds up—creating unnecessary noise and reducing cooling efficiency. Noctua tackled this challenge…
nothing fancy but make a huge difference. just place them under the bed in the holes and tighten as needed. be careful. the mount points are plastic and may brake. ( aka i broke one in testing :( ) if you can use TPU unscrew the 6 screws.…
Spring spacers for your MPP. Available in 2.5mm-10mm sizes, can technically stack them but I don't recommend it. Start small and go from there, I don't know what the max safe precompression on the stock spring is. Print something like…
Risers to raise Gridfinity bins up above the baseplate. Useful if you have a bunch of random height bins, but you want them to sit flush on top. Uses standard 6x2mm magnets (press fit). All risers are 1x1, with heights from 1U up to 8U.…
Printed spacers for the Adex Club system. Adding a low-mass spacer allows more configurations for the club by increasing the lever arm without adding (much) weight. This allows the club to stay a constant length through different weight…
This is a collection of multiple height and width combinations Bed Spacers for the K1 Max (may work with K1 but I don't have one to know for sure). For me the 13x12mm were the best option for the bed leveling knobs, because the width…
Man, I just missed the Instant Camera Accessories contest. I didn't even know it existed until now. Showcase video: I haven't tested if this fixes the spread issue that happens when the film is all the way to the left ('cuz of money) and…
0.7, 1.8, & 2.5 mm spacers for Shimano Hollowtech II bottom brackets. The ones that came with my How I Designed This http://wheelsmfg.com/bottom-bracket-spacers.html I have my own spacers, but I used this website to make sure they were in…
Get your outlets and switches perfectly spaced and your wall plates dialed in just right! 👌🤯 Also, why pay for spacers when you can make them yourself! 🤓 Each size is marked on the inside to help eliminate post print installation if you…
These are stands and spacers for 3/4" pipe clamps. There are two versions of the stands, one short and one tall. The spacers can be used to keep the work flat and away from the pipe to avoid staining. These are great for panel glue-ups! I…
These spacers are designed to raise the top cover of the Bambu Lab P1S away from the top of the printer. This creates a gap that air can flow out of to help with heat creep. In my opinion, this is a lot better than simply removing the…
Direct die cooling is done at your own risk! Noctua cannot be held responsible for any damage that may occur to CPUs or other hardware components when removing the heat spreader and using direct die cooling. Customers can easily 3D-print…
All-in-one Gravitrax level with included spacers.
I print with PETG 0.15mm and 100% infilled
Those spacers offset the top of the leadscrews by 13mm and reduce the depth of stepper mounts main hole. On my 250mm Formbot Kit, the leadscrews are a bit too tall in my opinion because the top of the front leadscrews can be hit by the…
Remix of 'compact weekly pill box' with the vertical spacers removed to facilitate more room for larger pills.
These gauges are pretty common, but only in the US ? In Europe, it is very hard to find them, and all seems to be in imperial units. I have made this set to handle the issue. You will find STLs for: 2 to 9mm by 1mm increasing steps 10 to…
Not my file. Reuploaded for my collection Thingiverse thing:5733107 by GreiniStyle
If you have used the original Snes controllers you immediately notice that the 8bitdo dpad is much looser, which at first seems to be nice but it might not perform as well as the original. This is not a big issue in all games but for…
A set of headset spacers for a 1 1/8" stem. Mixed set with 1mm, 3mm, 5mm, 7mm, 10mm, 20mm, 30mm, 50mm tall spacers. Pick and choose which ones you need. I've designed these with the intent of printing them in PETG initially. I wouldn't…
So you bought Creality's silicone bed screw mounts to replace the springs and you noticed one of the silicone mounts is shorter than the other. These fix that. Print 3x of the 5mm mounts and 1x of the longer mounts. 5mm mounts are about…
This is a stackable spring spacer for my blasters, to either adjust FPS of the blaster, or fix spring rattle! It's also compatible with some blasters by other designers. It fits pretty much any spring, such as k25, 788, Lynx/Longshot…
We have a rather large inset doorbell location, so much so that mounting a video doorbell at that location would have a very narrow view with obstructions on both sides. This is a spacer for mounting the Google Nest Doorbell, 2nd…
Horseshoe Shim Tile Spacers are ideal for spacing and aligning marble, granite, stone, and large format tile installations. They are engineered to produce a grout joint, and to quickly and easily space and align horizontal and vertical…
A friend bequeathed me with some extra metal shelves but I didn't have enough spacers to add them to my already-existing pantry shelves so I modeled these based on the originals. If you found this useful, it would bring me great joy to…
Overview This is a series of air volume spacers specifically for the Fox Float X and Fox DPX2 mountain bike suspension shocks. The CAD is roughly based off of the five piece kit that Fox sells. Revisions May 23, 2020 - Initial Release…
A simple set of preload spacers that will fit the stock Shocks on your SCX24 and AX24 rock crawlers. These can be used to adjust the amount preload on your shocks, therefore adjusting ride height of your crawler itself. When used in the…
The stock Anycubic bed stand offs are quite irregular in their height. This causes the ABL sensor to struggle to level the bed out properly. Print your own bed spacers to help solve this issue. As these will be in contact with the hot bed…
Helps add more rigidity to your bed, by supporting the bed springs. Printed mine in PCCF just to be safe.
It's 4-3/4" long to ends, has open slots to secure wire with tywaps. Enjoy (ars) 73 KE4ARI
Imagine keeping a SPRING SPACER under a paywall. Should've taken the $20 Available in 10, 15, and 20mm. Give your Stryker 2.0 an extra boost of power for FREE . Print it yourself, your siblings, your friends, or have a buddy print them…
Achieve Perfect Grout Lines: The Tile Spacer Collection (1mm-10mm) Professional results start with the right tools. This collection of tile spacers, ranging from 1mm to 12mm, ensures consistent grout lines throughout your tiling project.…
With this model you don't have to cut your spacers if all of them are the same height. Inner diamater: 16mm There's an off centered version to not to touch the bed if you print with PLA. Print details: Layer height: 0.3 Material: Creality…
I created several types of tile spacers for a small tile job in my house. Some are a remix of these models which weren't in metric. I also added some new, experimental types of spacers, they proofed as quite useful. The models are for 4…
NEMA 23 Stepper motor spacers Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: MatterHackers.com PLA ABS bay Notes: NEMA 23 Stepper motor spacers Category: Hobby
Inspired by this design ( https://www.thingiverse.com/thing:4099491 ) I created a version for keeping organized my spacers Print instructions It's pretty easy to print (and it doesn't need supports)
Part 2 - Rods and Spacers. For Part 1, see: https://www.printables.com/model/328497 These are my improvements for the ingenuous OmniStand v1.36 by Baron Williams - the replacement stands and rods for the FlashForge Dreamer printer. Think…
Ender 3 V3 SE / KE has an issue with leveling bed because of a lack of an elevation screw. Because of that, the printer has problems with auto-leveling and printing quality. With these small washers, you can raise the corner of the…
Just cut 2mm off the large side so it would better fit for my alex-drawer.
2024/12/28 : I uploaded v1.1. I've tweaked the design slightly to lessen the overhangs, resulting in improving printability. Additionally, I've eased the fit at the top for a more snug but not too tight connection. ----- As I've been…
---Deprecated. I've designed my own elevation system. However it is compatible to JDO-solutions marble run elements. Continue here! Note: I am in no way affiliated with Ravensburger or Gravitrax. All parts are my own (derived) creations…
A selection of spacers that can be used to straighten out warped beds. I needed these for my Kobra Max 400x400 bed. I printed them in Yellow PLA (cos they remind me of PacMan)
The reason for multiple pieces is because my printer is a Prusa Mini.
Airsoft TM MWS Buffer Spring Spacers Prevent overtravel damage from the bolt. Size: 24 x 24mm In: 1mm, 2mm, 4mm, 6mm, and 8mm I personally went for one 2mm spacer for my DE MWS. My print settings: Layer Height: 0,2 Perimeters: 3 Solid…
I didn't like any of the edge spacers that I found for installing my new Luxury Vinyl Plank flooring, so I designed my own. I included a large flat edge for the wall side to help be stable against old imperfect drywall, and a tail at the…
