Liczymy pasujące modele…
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Printed in PETG with 15% infill and supporters.
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The goal of this design was to make a 3-bolt water bottle/bikepacking cage mount that could be secured to the 43mm diameter lower tubes of my mountain bikes' suspension forks. I wanted it to be a very secure fit, strong, lightweight,…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Assembly video: Community on discord: https://discord.gg/ rWp2CKg
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
Clamp (D=37.5) for mudguard fixing to a bicycle suspension fork, I recommend to use PETG.
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
spare part new stronger version uploaded in addition.. . adopt if you like - FreeCAD file attached…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Omdat die dingen niet per stuk verkocht orden, dan maar zelf printen. Op enkele minuten klaar, zonder de wachttijd van de Core One+. Comme ces éléments ne sont pas vendus séparément, j'ai dû les imprimer moi-même. Prêt en quelques…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Een haak om mijn zware steekspade op te hangen. Een zelf gemaakte spade op smalle gleuven te graven, zoals voor aflopen aanvooren elektriciteits kabel enzo....in het gazon. A hook to hang my heavy spade. A homemade spade for digging…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
Inspired by Daniel Norée's openrc F1 project I wanted to build a remote controlled Formula 1 car of my own design and fixing the ‘flaws’ of his car. I wanted my car to have a fully independent suspension utilising pushrods and not just…
There is a small torx screw in the adjusting nut that needs to be removed first. In my case the screw was hiding in the back of the nut so I had to use a bit of force to loosen the nut so the screw would show up. I printed it with 4…
This model is compatible with the lego system.
Updates 2023/2/2 Added 10mm thick versions per request in the comments! Pocket.Belt.Carabiner.10mm.3mm.Short Pocket.Belt.Carabiner.10mm.5mm.Long 2023/2/8 Added 10mm and 6mm thick versions with a simple clip instead of a carabiner per…
v1.1 Added extra tabs to support more tracks lengths and positions. v1.0 Added a spacer to keep the bridges the right distance apart for easier playtime. Fun project with the kids. I also included long and ascending tracks if you need to…
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
Real quick: Check out my other S22 designs like my LED handle/boomerangs , help me spread my design by hitting the like button , post a photo as a make once you've printed things out!! There's an active community on this, come: join the…
A remix of premolar's MTB Visualizer modeled after my Diamondback Release. Printing I printed mine with a 0.2mm layer height and a 0.4 nozzle and a brim on the axles. The suspension, frame and grips were modeled at increasing layer…
Update 04.10.2025: Some people who tried this upgrade found the original arms a bit thin with certain materials, so I’ve uploaded a strengthened version. Both versions are interchangeable. Lower arms are now 6 mm (were 4 mm), and upper…
The "Voronoi Ethereal Suspension" sculpture is an abstract representation that utilizes the mathematical voronoi pattern to mimic natural forms with an ethereal touch. Its design suggests a figure in a contemplative pose, providing a…
AX24 XC-1 52mm High Clearance Lower Suspension Links A set of stock length High Clearance Lower Suspension Links for the AX24 XC-1. I wanted a set of color suspension links to match the Orange body of the AX24 itself. Printed in Prusa…
You might need superglue or other strong glue that works on your filament type.
suspension for RC car, other parts in profile
Hello everyone, I redesigned the lower rear suspension arm for the Tamiya TT02. For a other projekt I needed them to be slightly longer so I made the model in SW configurable. The models I've added are the originel length and +1,5mm. If…
I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a…
Ford Fiesta MK5 Suspension top strut mount & bearing Cup/Cover For Ford Fiesta MK5 facelift (2004-2008) Left and Right version (Different) Print Settings Supports: Doesn't Matter Resolution: 200µ Infill: Min. 50% Filament: ABS/PETG/ASA
Rear suspension IFP depth setting tool
Files for gear box with 10% overdrive and dig property + 4-link suspension Needed Parts: Coil over shocks for WPL (I have used these which have a decent stroke of 17mm https://www.aliexpress.com/item/1005004287715717.html) 16pcs 4mm ball…
Yes, it's time to add a fullsuspension bike to the hartail that's been here to download and print for over a year. The instructions are similar: Print one or two – small or even maximum size what fits your 3D printer build plate. Maintain…
I printed few parts from original author and I found that the tip is very fragile. I remixed it to be more durable. Enjoy
MTB Suspension vise jaws with magnetic attachment (12x3mm magnet). 0.5mm removed from each clamping face to allow for a good squeeze. 130mm length Set 1 - 31.6mm 30.9mm 10mm 34.9mm Set 2 - 27.2mm 7.5mm 28.6mm 25.4mm 10mm Set 3 - 25mm…
Description: I designed these “Flex Blade” arms to get more travel out of the stock suspension when using the stock shocks. I have Treal 4 link arms installed, but it should work the same with the stock links. The mounting for the flex…
Safety warning Do not use consumer-grade/desktop 3D-printing for this application unless you anneal the prints in an oven and even then, don't go beyond 6mm thick. Laser cutting or CNC milling HDPE plastic up to 12.5mm (1/2") is OK.…
This is a refined version of my previous deep pocket clip, to better match some of the stainless steel suspension clips you see being sold online. This is a simple S-shaped design, making it easy to snap on your keychain. I printed this…
RC car steering suspension replacement for a broken one
This is a small prototype I did for a university project. I used filament splines as "screws". I only printed the none steering axe. Maybe you can use it. I hope you like it and can maybe do something with it. You need: name: count: 7*3*3…
Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…
I had an issue where my links kept falling off the pivot ball so I took some inspiration from my injora shocks and added a flat side that keeps the links from falling off. Category: R/C Vehicles
I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
Quite universal mount as front and rear element are separate. The goal was to make it printable on a standard 20x20x20 printer, just tilt the rear element 15 degrees, or check the 3mf. Also the print requires very little support. Printed…
Was designed for my work colleague for his retirement. Simple keychain as a fun gift simple to Print, not much difficult. Edit: Pension Keychain added
Well, I guess the purpose of this clip is obvious: comfortably carry stuff in your pocket. * Edit 19.12.17: Added a second, more angular version. Not tested. * Edit 21.12.17: Added a third version that should be a little easier to print.…
Spare front suspension mount for the Tamiya DT-03 when no genuine spare part is available. It's pretty similar to the genuine part and - depending on your filament choice - should work just as well or even better. Print Settings Printer…
A set of stock length upper suspension links for the AX24. I wanted a set of color upper suspension links to match the Orange body of the AX24 itself. Printed in Prusa Orange PETG
This is a complete redesign of my original “One Wheel Freestyle Fingerboard - Fidget Toy” that I designed about three years ago: Based on some comments, I decided to make the parts fit together better and to make available larger wheels.…
This a first subset of my new RC car project. I'm trying to replicate as much as possible a European medium compact car at 1/12 scale (in the likes of a Peugeot 3008). Usually, these cars don't have a double wishbone suspension so I had…
EDIT: You can find an improved design of this spring and the space mouse here: This is a WORK IN PROGRESS . This is a remix of the original CAD mouse / Spacemouse using Hall Effect Sensors. In the original the point of rotation is offset…
Print easily in one flat sheet, and then fold into a pint-sized racer! No Supports Utilize a filament swap ~layer 20 for custom seat/engine color Compliant Mechanism suspension Instructions Fold the green lines slightly up. To do this…
Simplify mountain bike suspension setup with the Suspension Sag Ruler, a precision tool for sag measurement. This ruler makes setup easy for shocks and forks that don't have sag measurements printed on them. Features: Millimeter Markings:…
Suspension for the Neptun 3 pro cable channel. You can use the screw from the clip.
This is a springless rear suspension design that removes the need for the soft pen/pencil springs used on the rear suspension. Note: I have printed and installed it on my car and it fits perfectly. The spring stiffness feels pretty good…
This model is compatible with the lego system.
So I can't help noticing someone hasn't already made a 3D printed version of DHS suspension for MS chassis….I mean people been doing these mods for over 20 years, but mostly Tamiya spec mods that are both time and money consuming to make.…
Hope the 3rd part was fun for you :) https://www.printables.com/model/888136-sidecar-velorex-560-part-no3-the-sidecar-body-and As usual the model part consist a big parts but the very small also so pay attention to the description and…
I wanted to build a servo-driven tank but, couldn't find one with a working suspension. I designed this off of a Panzer III, and it has a pretty realistic suspension. This was started on my Monoprice Select Mini, hence the size. Video…
This beefed up version of the front bearing hubs preserves the original wheel bearing fitment diameters but beefs up the screw locations. It uses M4's for each location. The other beefed up version used a M3 at the steering link which I…
I really enjoyed building the excellent OpenRC F1 by Daniel Noree and have started to modify parts to make the driving experience a bit better. This design is compatible with the original chassis and 2017 update (narrow) to give a bit of…
Brake hose guide and pad for Fox suspension forks. Pad can be printed in flex filament but that's not absolutely necessary. Working on one of my Fox suspension forks I couldn't find the hose guide. Did a quick search on Thingiverse…
If I wear tighter pants, I have a hard time digging for my keys, and whenever I sit down, they tend to settle to the bottom in an uncomfortable mass. So I designed a simple clip to keep to suspend them so as to keep from bunching up in…
Print with 7 perimeters and 100% infill uses 5x5mm and 6x2mm magnets to hold it on the jaws. You'll want to mirror on the y axis to print the opposing side.
Cover for Pressure Gauge for Air Suspension Fiat Ducato 250 Printed in ABS, no Support, 20% Infill
Those are alternative parts i designed and printed from tpu (i used 95a etpu from esun in my case) to replace the rubber bands on the Scarbo in hope that they wont get loose over time like rubber bands sometimes can. print settings: I…
This thing breaks all the time and I got tired of buying replacements, so I modeled this. It works fine, still breaks like the original. spoiler: I purchased metal ones because I got tired of printing replacements.
RC Suspension hanger pill organizer with snap in top and space in center for additional storage. Will work with 10th scale cars that use inserts on the A thru D blocks. Examples) B6/B6.1/B6.2/B6.3/B6.4 T6.1/T6.2 SC6.1/SC6.2 B64/B74/B74.1…
Lego part that fits perfectly on original Lego wheels. Normal lego brick holds not so much.
I 3D scanned the arm and made it a bit smoother. It's still a bit rough but it's fine for printing and using on your RC. Make sure to use support material on build plate only.
The model is one piece. It is possible to produce the model with SLA, SLS and MJF printing methods.
I wanted to make an easy-to-use case for suspension-bushings -also called "pills"- for my Xray XB4 and XB8. As Team Xray uses these same components in other (offroad) cars, the boxes are also suited for the XB2 and the XT2 It helps to…
Replacement crush washer for suspension forks with an 8mm shaft - this is most 32mm RockShox and Fox forks. Sized so that it will print with four walls on a Prusa Mk3 with a 0.4mm nozzle - the 1.67mm thickness was suggested by…
By popular request, here are all the files needed to create a car using my suspension and wheel system. Included are both .step and .stl files of the individual parts and the “bundles,” which include everything as one object with multiple…
Spare rear suspension mount for the Tamiya DT-03 when no genuine spare part is available. It's pretty similar to the genuine part and - depending on your filament choice - should work just as well or even better. Print Settings Printer…
Lampe Suspension - Humanoïde 7 pièces à imprimer pour obtenir cette lampe humanoïde très amusante. il vous faudra une douille pour ampoule E14 Utilisez de la super glue pour coller les pièces ensembles J'ai modéliser le corps sur une base…
This is a replacement lockout switch for a front suspension Rockshox fork. My fork is a coil fork, so I don't know if it works with their air forks. It was attached with a sheet metal/wood coarse thread screw. An octagonal inset in the…
I used these tools to replace the 6 pairs of bearings in my mountain bike suspension. You can buy the specialised tools to do this but I wanted to see if it was possible using my own 3D printed tools. The rear suspension triangle started…
These things are made to make the suspension harder or softer. I printed it in PLA because it was the only filament I had, but printed in PETG or any other solid filament will be an improvement
This remix replaces the original belt loops with "locking" Molle clips. Several changes have been made to the clip and case design to print more easily without supports. I've also included a version with a small snap-out support I created…
This model is compatible with the lego system.
This part is printed at a time, after which it is completely ready to work! Your RC can use this suspension to adjust the height and handle the roughness of the road surface You need to put up support only from the base! After printing,…
Based on someone's idea, I created my own version of a bolt cover for scooters from China like Laotie, Boyueda and others. No text or logos. You can finish it yourself in slicer. Install First put the version on the nuts (hex). Lightly…
Mounts your Headlight to a SR Suntour Suspension
Soft jaw rod holder 12, 14, 16, and 18 mm holes. uses 5x5mm round magnets to hold the jaws to the vice. Best printed with PETG using 4 perimeters and 7 top and bottom layers
A-arm type rear suspension for The Marmot - https://www.printables.com/model/1149568-the-marmot-110-scale-off-road-buggy Instead of the swing axle type suspension included in The Marmot, this type uses the same a-arms as the front of the…
A simple bridge model that can be used to test your printer's bridging capabilities. The model is printed on its side and the suspension cables are printed via bridging. Print without supports.
This bottle cage will fit any Nalgene 1L (32 oz) water bottle, it goes on the suspension fork and will fit a FOX 34 or any 41mm diameter lowers suspension. The bottle cage requires 3 printed parts, it was printed in nylon with 35% infill…
Použijte lepidlo a šroubky M3 Use glue and screws M3
I really liked design of the original model, but had a lot of unused M4 bolts with countersunk head, so I made minor change in design of the original holes. Also created new connecting spacer, because original did not have thread inside…
Tired of purchasing half of the front suspension when you lose one of those fiddly clips on the MA-020 Mini-Z? Print a permanent replacement and use a couple spare screws to keep them in place.
A customized 1:731 scale model of the Golden Gate Bridge, created as an educational civil engineering study. The project explores the working principles of suspension bridges, including load distribution, cable tension, tower support…
For those of you who have done the front suspension mod, here is the solution for how to hold the servo saver without drilling holes, etc. Replace the original servo holder with this one. I used flexible material (TPU) so the top arm can…
Attachment for a Trofast basket to click into place. Each variant is needed twice and clicked into the corners of the Trofast basket. The entire part is then hung in the lower part of the Hauck children's chair. The parts are held using…
A updated, better looking rear suspension for the Trophy Truck V4. It also is more sturdy and saves 50g of weight.
Not much to say beyond what's obvious. It's a case for the Sram/Quarq ShockWiz suspension tuning system. It doesn't really come with one besides the retail packaging, so this is a better way to store it in a tool box type situation.
This is the front upper mount for the upper a arms on the 1:8 6S ARRMA platform (BLX/EXB) Print in ABS/PETG/PLA 4 walls, top and bottom 100% infill.
Only driven a few metres and the first part is already missing and there is no replacement in the packaging? Then print one quickly :-) Needs some Support. As shown in the slicer screenshot.
These fenders were designed to be printed in ABS-like resin. Pre-supported files included. Find also threaded versions and a 3mf file with suggested print settings (from the prototypes, PETG) attached to be used on FDM printers. Assembly…
UPDATE 2026-05-31: Fixed Nosfet version (thanks to @filamentos_1335453 in comments) Suspension adjuster for Fastace/RFloXa suspension. LeaperKim Suspension Adjustment Tool.stl - 18mm for Leaperkim (Veteran) Sherman S, Patton, Lynx,…
As the original Tamiya parts seem to be unobtainable in Europe at the moment I designed this parts for my Daughters DT-02 Nissan Titan RC Stadium Truck. It is a direct replacement and seems very strong when printed with 4 outer layers in…
I 3D scanned this Arrma part and edited the holes a bit so it's printable. It is a little bit rough on the surface. The printed one is on the left. It fits without any problems, screw holes are a bit tight but it won't strip your screw…
This model is compatible with the lego system.
Replacement Accuride Drawer Slide Suspension bumper and soft-latch. The original rubber bumper crumbled so made replacements with Overture PLU. After experimenting, printed with 100% fill to achieve the closing and opening resistance that…
![Subaru Suspension spacer lift-kit anti-sag templates [Legacy, Outback, Impreza, WRX, STi, Forester - various years 1990-2026]](https://media.printables.com/media/prints/44b44ccf-34bd-4dcf-aaf0-5ba3365ce514/images/11800929_ef583532-e08f-4393-a7b3-1f879f95504b_1922b272-25b2-40f6-acbe-62002f49281c/screenshot-2026-01-21-185927.png)
