332 modeli
General Update how to support different Sculfun products / configurations: If your HoneyComb Board used is NOT the same size like mine: exactly 405 mm ( X-Axis ) by 405 mm ( Y-Axis ) mm we need to adopt the distancers. Measures and sizes…
3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)
Update 30.11.22: English translation added (scroll down) Ich habe vor ein paar Tagen einen Sculpfun S30Pro Lasergravierer bekommen. Die Maschine ist klasse, benötigt aber meiner Meinung nach ein paar Optimierungen: 1. Cablechain Die lose…
Install instructions and the original launch video here:
Small simple holder for Sculpfun S30 focus cylinder holder, that attaches to rail.
All models were originally too high for my purpose so here we go: These attachments only raise the laser by 3mm as a first step, which still allows cutting paper or cardboard. Only when you attach the extensions does it get 30mm higher.…
UPDATE March 2025 All please NOTE …. this is valid for all of my Sculpfun related designs: The Sculpfun modells AND accessories incl 3rd party DO COME WITH VARYING SIZE PARAMETERS. My Laser Frame size is: X-Direction 510mm and Laser…
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Display Stand for the SNES30 or SFC30 controller should work just fine with the Super NT versions of those controllers. Category: Video Games
Stand for the NES30 Controller, it is also compatible with an original NES controller and the NES Classic controller. Easy to print, no angles exceed 20 degrees so no supports are required. I printed mine at 0.2mm layers with a 15%…
how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…
NOTE: The printable part that are mounted to the sculpfun frame ( 2020 extrusion profile ) here are designed to fit to the “coats” around the original legs of a sculpfun laser. For the coats pls refer to one of my other models ! ( The…
This adapter aids in balancing a ZWO Seestar S30 or S50 smart telescope over the center of gravity of the tripod when used in equatorial (EQ) mode using an adjustable EQ wedge. Say goodbye to field rotation and hello to zenith imaging…
A 10" Rack Mount for the NETGEAR GS308E Managed Switch . Features The sides include a honeycomb structure for better airflow. Two small screws can be mounted on the floor part which will hold GS308E in place. Printing The print takes a…
Switch dimensions: 94mm width 26mm height without the feet mounting holes: 6.5mm diameter 35mm center distance
Seestar S30 Fall-Away Dewshield and Masks-Stop worrying about shutting down with the dewshield installed! Version 1.2 has a longer front plate so that it won't jam in EQ mode! When I bought my Seestar S50, I had to buy this equipment ($70…
Wall mount (invisible screws) for Netgear Switch GS308T
This is a holder for BAHCO sliding combination squares CS150 and CS300 for IKEA SKÅDIS pegboards . It uses Skadis T-Nuts for a very secure mount. For CS150 there's a single and a double version for one or two combination squares…
Hier eine Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700. Diese wird lediglich auf den originalen Behälter gesteckt und der originale Deckel kann weiterhin verwendet werden. Die Lautstärke des Mahlwerks wird nicht…
Dust cover / lens cap for ZWO Seestar S30 smart telescope
A small shelf designed to hold the MikroTik CRS305-1G-4S+IN switch in place and connect to a server rack. There are small pegs to hold the switch in place: it is a somewhat tight fit, but the switch can be set atop the pegs and slid…
Custom brackets for under-desk mounting of the TP-Link Kasa HS300 Smart Power Strip. bsed on the amazing Underware system from @HandsOnKatie_827995. I used Katie's power strip parametric as a starting point, but had to modify the power…
S30 pro arrived. Wanted a dust cover. The S30 one works but does not cover telephoto lens. Modified lifour S30 Dust Cover in Fusion360 to fit better. Works okay. Better in Pla Pro or Petg. Version was updated. Has rounded bottom and more…
This is an iphone12/iphone12 pro with Case mount for a Sprinter 2019+ (VS30). Inspired by another mount but redesigned from scratch to make it easier to print and remade for the iphone12/iphone12pro. Print instructions 15% infill, in PETG…
This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…
A mount for a servo on an 8020 series 10 extrusion. Print instructions Unassociated tags: Series 10, servo mount Category: Electronics
This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…
Cable and air assist guide that uses the standard bolts. Keeps the air assist hose and the laser cable neatly on top of the aluminum profile. Only tried on Sculpfun S30 but could work on other Sculpfun machines as well.
Originally model was prepared for GS305EP switch, but considering size of other GS equipment, it should accommodate most of them. Model has tolerances, so switch does not have to be forced into it. End plate requires M2 screws, holes are…
Same as the original, just reversed with the big hole towards the shifter.
UPDATE: I made a new adjustable adapter that I think is better, check it out here: https://www.printables.com/model/1180078-zwo-seestar-s30-s50-equatorial-eq-wedge-adapter-ad This adapter aids in balancing a ZWO Seestar S30 or S50 smart…
As many other users the wristband of my Polar RS300X broke. Therefore I designed this adapter plate so I can mount any 20mm wide wristband to to watch. After cleanly cutting off the rest of the original wristband you can directly mount…
Mountingbracket for Netgear switch GS305 or GS308 with a height of 29mm
Vixen dovetail bars for ZWO Seestar S30 and S50 smart telescopes. I made these in both 60mm and 90mm lengths. The 60mm lengths are good for most of the EQ wedge adapters on the market and the 90mm length is good for the William Optics EQ…
Requirements: M4 x 10 screw * 2 M4 Threaded insert * 2 (optional)
Needed a way to mount two GS308E Netgear switches onto a wall on top of each other to conserve space so designed these wall mounts that fit around the switches. I have left room below the switches to pass cables, and left gaps between the…
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…
10" server rack for Netgear GS305 5 port switch. Pretty simple design, I printed face down using mouse ears.
After (my wife) dropped the key to the 2003 Lexus ES300 one too many times, the key/fob housing broke beyond repair. This is a replacement housing. It turns out that the shape of the main key and the spare key is different at the housing…
Seestar S30 Powerbank holder. Holds your powerbank on your S30 for all night sessions. Attaches to the side for easy connection of your USB powerbank. Allows extended imaging sessions even using Dew Heater.
Cable and Air hose Management for Sculpfun S30 (Pro, Max) and S-models. Cable Chain + Gantry Attachment + Rail Support CABLE CHAIN 30x20 (30x20x40mm and 17x15mm internal) CableChain_3020_Start (1pz) CableChain_3020_Link (As needed for…
Add one liter volume for extra coffee beans Category: Kitchen & Dining
After repeatedly searching for my focus cylinder all over the place, I had finally had enough. The holder is so precise that you can hear the last bit of air escaping when you insert the cylinder. You just need to use slightly longer…
Adjusted the hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes. In the pictures it is 16mm and a very snug fit. In the uploaded 3mf I adjusted it to 17mm to allow for wider variance. 3mf is…
Hi A small improvement concerning the adjustment screws of the Z axis of the laser, indeed I find the original screws difficult to handle. Simply snap in the originals screws into the printed parts I have also designed an adjustment screw…
Support to be able to hang Netgear Switch 8 port Unmanaged Gs308 stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.
A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
Just like the title says, this time its symmetrical
Simple display stand for your 8BITDO SNES30PRO or SFC30PRO controller. Print in the orientation that it will sit on your desk. No supports needed. Mine was printed at 0.2mm layers with 20% infill in ABS on a FlashForge Creator Pro…
I needed a powersupply to repair things on the go. The powersupply snaps on a 18/20V Black&Decker battery. I added: A power switch to turn off A XT60 Jack - to connect a D60 soldering iron or to charge something else What do you need: 2…
Replica of the elusive OEM side skirt mounts. Based on some old forum posts and some trial and error. I recommend printing them in Nylon, you might get away with using PETG but wouldn't recommend ABS/ASA due to their brittleness. PLA is…
A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…
Inspired by Turtleman's collection of Low-Poly vehicles. It uses the same wheel as his models (atleast his Porsche 911)
Remodelled in Fusion360 to make a few slight changes Add XT30 connector Change switch to a model I had at hand Add bottom intake vents to allow for natural convection Uploaded f3d source file for customization of input jacks
For a full description and build instructions, please see the original model Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source . This remix is intended for stand-alone battery operation without the option for…
Lexus IS200 IS300 Cupholder. Fits in the original glove compartment, no gluing required
This enclosure was built to house a Sensirion SPS30 (particulate matter sensor) and an Adafruit BME280 (temperature, humidity and barometric pressure sensor) for an outdoor weather station. The goal was to have an enclosure that could be…
Snaps onto the switch and locks into side vent holes with small pegs. Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes. Best to be printed with fan side on the…
I wanted to keep my factor interior lighting from my Mercedes Sprinter Van as I build it out as a camper. I created an adapter to remix into various housings around the vehicle and thought I'd share for others to build their own housings…
The printed object can be easily clicked and also easily removed. Manufacturer uses a plastic tape. It is recomended to use small 0.25mm nozzle. Object has fine details. I have tested 0.4mm nozzle and results were not so good. Note…
Rack Mount L Brackets for Kasa HS300 power strip using existing end caps from this model: Kasa HS300 Power Strip Mount by Pantherclawz Best to use my remix here as there are some fitment issues on newer HS300 power strips around the…
Paraluce magnetico per ZWO Seestar S30. necessita di 2 magnetini di diametro 5 mm X 1.5 mm. Con la presenza dei magneti il paraluce rimane stabile anche in caso di vento.
You can fix it with double adhesive face or 2 screws Printer settings : Material : PLA Infill : 20% Support : no
Dew/light pollution shield for the Seestar S30. Friction fit.
This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…
-Abdeckungen für die beiden Endschalter. -Kabelstaufach Unterteil mit Halterung für Abstandskegel. M5 Gewinde für Innensechskantschraube. -Abdeckung wird am Rahmen Festgeklemmt. Zwei M3 Schrauben mit Mutter und Beilage werden benötigt.…
Remixed the housing from JT https://www.thingiverse.com/thing:2820147 in order to support: ESP32 Feather Huzzah with 2.4" TFT Wing Bosch BME280 sensor Sensirion SPS30 sensor Source code can be found here:…
I wanted to move my switch off of the shelf to make it easier to access, so I designed an under shelf mount. It prints fine without supports if you print it with the back downwards. I've included CAD files if you want to remix it.
FR Quelques accessoires pour la laser SCULPFUN S30 Pro Max de 20w, en particulier des cales de positionnement pour la rendre solidaire d'une table réalisée en MDF et pour permettre la gravure d'une grille de positionnement (les fichiers…
Simple mount that allows you to mount any dragchain with a 16mm hole distance on your Sculpfun S30, uses original bolts. 16mm hole distance center to center 5mm holes for mounting drag chain
The VS30 has a deeper panel for the switches and they're not round on all four sides. Print Settings Printer Brand: Bambu Lab Printer: Bambu X1C **Rafts:** No Supports: No **Filament Material:** PETG Category: Other
Since the wall mounts I found with a quick search didn't really appeal to me, I developed my own version. The wall mount consists of 2 parts that are screwed by means of M3 screws and threaded inserts. The switch is tightly enclosed by…
Seestar S30 power bank holder designed to keep your power bank securely mounted during long imaging sessions. It attaches to the side of the S30, allowing easy connection of a USB power bank. This enables extended astrophotography…
A 5.25'' bay cover for use with the Lenovo Thinkstation S30, matched hexagon aesthetic. If, like me, needed to use 5.25 inch bay for something else like a hard drive and don't like the ugly hole left in the front of your PC, or the blank…
*(Update: Made lens mount UNIVERSAL, now fits most 52mm lens. 5/12/25 * *(Updated clearance 10/27/24) * The legendary @theRealShooKon3 reached out to me with a problem that needed a solution. His IRL streaming camera kept breaking due to…
Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…
Das obere Teil wurde aus PLA gedruckt, ggf. wäre hier PETG nicht verkehrt. Das untere Teil kann an das Oberteil angesteckt werden und wurde aus TPU 95a gedruckt. Mein TPU war leider etwas feucht und es wurde zu langsam gedruckt, deshalb…
Designed some taller case feet for Mini ITX cases, specifically the KXORS S300 and S400 to help with bottom air intake. Original feet are 10mm tall, so I created 20mm and 30mm variants. The 20mm variant height is approximate. The hole…
This remix fixes the End piece so screws are more accessible, see original model for Front piece and print instructions.
I've created a power supply that's designed to be powered by Milwaukee batteries. This setup allows for a versatile and portable power solution, utilizing the robust and readily available Milwaukee battery system. The power supply…
Here is a print that will fit diagonally on a Creality K1c. I printed it in PETG This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's. There are ventilation holes which also aid in reducing the amount…
You need: 1 of each of the 4 models 4x M3 heat set inserts 4x short M3 countersunk screws 4x countersunk screws for your preferred wall mount solution Print the outside brackets with the outside on the build plate, so no support is…
Theres the STL and the Ondsel file, i printed it at 100% and it worked ok, Only change i made after print was add a 1mm fillet on the recepticle to make it stronger but its manly aesthetic. Use a Brim, the side where there is no holes…
This is 19" 1U rack mount bracket for a Netgear 8-port Network Switch (GS308PP). It's pretty beefy because it will be in a portable case and need to stand up to a lot of rough handling. I printed this with PLA on a Bambu Labs A1 Mini, so…
This bracket can be screwed on the underside of a shelf to hold a network switch. The switch will stand on its feet, and has a gap above to allow cable routing.
Case to house a Rui Deng DPS3003 and a Sony Vaio laptop power supply (model 101310-11) which I happened to have on hand. I wanted something without any mains internal wiring. The laptop power brick puts out 19.5V up to 2A so perfect for…
This case is a remix to accomodate the silver psu from prusa i3 mk3. Hole for 40mm 24v fan, original powerjack and on/off switch. Unsolder the powerpanic board.
Uses Leviton push pegs to mount in the box, then slide your switch on the pegs. Pegs are 80mm on center, with 6mm posts
I wanted a way to have my S300 case in a vertical position, but did not want the cables hanging from the top, so I've designed this model to do just that. You might need a PSU cable with 90deg. If the 90deg is facing the wrong way simply…
Beware this is only the right side of the modular rack model. Make sure you know this before printing. Use supports (organic is better)
An improved mount that prints in one piece and will securely contain a Netgear GS308E switch. Uses set screws. Will continue to add parts and pictures as I build my rack. Print face down with supports enabled. Four m3 screws are required,…
It is designed in 2 different parts, left and right which are screwed onto the switch.
I prefer to keep my switches off the shelves and add them to a standard 19" server rack instead. I recently picked up this GS305P and adapted a rackmount adapter for it. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x…
Remix of the 255mm version for the 210mm and complete by the other necessary junctions. Use a 32mm suction pipe for the internal diameter and 41mm for the external.
A shelf for mounting MikroTik CRS305 in modular rack. Can be mixed and matched with: blank panels: https://www.printables.com/model/898351-rack-mount-empty-panels-small-printer-friendly patch panels:…
I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…
I'd printed out one of Masiakla's rack mounts to use with a GS308v3 switch, but as I was considering the way I'd use it in my own setup, I realized I wanted to have at least one keystone connector to run a cable through behind the rack.…
Endstopholder for upgraded Sculpfun S9 with monorail on x-axis + Laserhead S30 Pro, 10W. There are 2 Holders, one is For the X-Axis one for the Y-Axis. You need additional: Tool for M3-Threadcutting; or use an M3-Screw and cordless…
If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way. So I got replacement then modeled it the best I could to match to the original toyota…
![Netgear Switch Wall-Mount [GS308, S350 Series]](https://media.printables.com/media/prints/460635/images/3783683_5042795b-299b-464b-890b-50ccf43c28fc/img_20230423_134931.jpg)
