169 modeli
A simple mosaic inspired geometrical plant pot for your house plants! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print with 0 infill, 0 top layers, and 3 walls.
A hear a lot of compliments about our banner tile graphic so... Now you can enjoy it in as a pot design!! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Easy to print, customisable, nice and smooth. Change size and chamfer in slicer or onshape. Easy to play with no top or bottom walls.…
Each vase was printed with a .3mm layer height, 2 walls, and 5% infill. I attempted to print in vase mode unsuccessfully as it resulted in several holes in the print. Do not print in vase mode.
This model was printed at 30mm/s with a .2mm layer height in vase mode.
7 Sizes to choose from! No supports, scales up but probably not down. Tactile/fidget toy. Fun shapes and easy to print. My most flexible model so far! Check out the video!~~ See the whole collection here:…
Remix to 5 colours support free and printed. Time-lapse print video : https://youtu.be/0M-ffuzG0dc Subscribe and stay tuned for latest support free and multicolor stl remix! Category: Sculptures
Let's do multicolour now. You can print up to 9 colours with MMU2S. https://youtu.be/uNqqN5Ao_hI Subscribe Now! A very good model from Velrock. Further remix to multicolour. Time-lapse print video : .https://youtu.be/uNqqN5Ao_hI Baby Yoda…
This is designed in order to facilitate the creation and hanging of mosaics from the 100hex project. Print instructions Category: Decor Summary This is designed in order to facilitate the creation and hanging of mosaics. It was…
I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.
This is a game piece box with a sliding lid. There are design options for the box bottom and lid to have a mosaic pattern or solid surfaces, and flat or concave/recessed faces (on the lid). All of the lids will fit either of the box…
Don't forget to like this model and sub my YouTube channel. Category: Sculptures
Un papillon façon mosaique, puzzle ou géométrique, à accrocher au mur ou autre. A vous de jouer avec les couleurs suivant vos goûts et styles. Imprimé avec une hauteur de couche à 0.2 et 20% de remplissage. Faites un essai sur un morceau…
This model was printed at 30mm/s with a .2mm layer height in vase mode.
There are two configurations of this model you can make. Each one will require six bottom panels and six top panels. Tree supports were used when printing the lamp center part. I would suggest using z-hop when printing the frame part.…
This is an insert / organizer for Azul with the Crystal Mosaic player boards, the Special Factories promo, and the Joker Tiles promo. It has no lid lift, supports vertical storage, and was designed to aid setup and teardown. I was not in…
This wall hook is compatible with piece 67139 which is used as a hanger bracket by LEGO's line of dot mosaic art sets. Hanger Hook I printed these standing up on their bottom end with a raft just to be on the safe side. This hanger…
This model i made from using the design from Sebaho on Cults3D and turned this into a multicolor design to use on the MMU or mosaic palette i used normal black and red, silk Blue, Silk Gold, Silver for this print i printed these with 0.25…
Company welcoming wall mosaic. The original piece is placed on the wall in Prusa front desk / Prague. It is fully 3D printed from white and black PLA material. Postproduction was made by filling spray and iron look color spray. I scaled…
Because the Lego Mosaic Maker (40179) doesn't come with a frame to hang it on a wall, I've created one myself. It exists out of 2 models. Corner, 4x Bar, 8x I've printed it in PETG and i only used a little support for the dovetail on the…
I think I'm addicted to making vases. So many possibilities. Lol Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2mm Infill: 0% Filament: ZIRO pla translucent Notes: No top layers in spiral…
Anillos de 17,2mm y 18,3mm usando un patrón rosca con simetrías para crear el mosaico en rombos. Nos encanta como ha quedado con la configuración de 0.12mm de altura de capa aunque con 0.16mm también queda genial y bajas tiempo de…
Wall art or pad with number mosaic design Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament 0,15 - 0,2 mm layer height 0,4 mm noozle Happy printing!
In my final setup I have a MK3S in a lack enclosure with a Mosaic Palette 2s Pro. In this configuration I put the Mosaic Palette 2s Pro in a top of the lack enclosure with a bottom up stand find on PrusaPrinterers or Thinghiverse. The…
I present to you my very first 3D creation. The set consists of four cookie cutters. The cookies put together create a beautiful motif that will not only decorate your holiday table, but is also suitable for any special occasion. You can…
Changelog 24.09.2025: initial upload of the collection Requirements All lamps have a size of ~ 105mm x 105mm x 174mm, making them printable on almost all printers, even the Prusa Mini. Each lamp requires ~130g of filament (preferably PLA…
I wanted to decorate the hallway in our flat with some pictures. But as I continuously take new ones, and I don't want to get out the hammer and nails every time, I designed this modular picture frames. With this one you just need to…
Remove the insert provided with the Mosaic Palette 3 pro and insert it into your print. V2 of the clip has a filament guide and a slightly bigger hole for the filament to enter the extruder, I also added an inspedtion opening for the…
With a simple figure composed of 1 base body (normal and inverted) and 6 triangles we obtain a varied and colorful mosai
Developed for a friend who needed to organize his filament storage and feed solution on his palette 3 pro. USES PC4-6 fittings and normal PTFE 4MM OD, 3MM ID. Here are his sources.…
During looking forward of my arrival of my preordered Palette2, I was thinking about the management of my filament spools. I came up with a design for a modular spool holder, which I wanted to share with you. Features: Minimalistic design…
I tried a few different Palette upside-down solutions to go on top of my lack enclosure, and found CarstenD's ( https://www.thingiverse.com/thing:3458138 ) to work the best. The angle it was tilted at combined with the height placed it at…
This is an insert for the retail edition, not the colossus edition! There are 3 lid for anything with the lid, you can choose the solid version, the hex version, and the hex with the text. You don't need all. player_bottom_x3 : 3 of this,…
An insert for the deluxe (Colossus) edition of Mosaic - A Story Of Civilization. I had some specific needs to address. First it had to fit in the box with NO LID LIFT. Second, it had to accommodate trade good tokens in coin capsules, and…
A simple PCIe slot cover that can be printed without supports. The airflow holes are modelled after the Selflock Mosaic pattern.
This innovative 3D printable wall art serves as both a striking decorative piece and an effective acoustic diffuser, perfect for enhancing the acoustics of any room while adding a touch of modern artistry. The design features a…
I printed this on .2mm layer height on my Bambu P1P and everything turned out great. When I first made it, it was 4mm too short so I have updated the files for uploading but other then that everything works great. The only thing that…
Designed to allow full insertion of the bracket upside down with the corner cutout (the P3 has some internal steel bracketing that doesn't allow the normal stand profile to insert fully), and a small standoff supporting below the bracket…
Original model https://www.thingiverse.com/thing:4672484 I originally tried to paint this model in Prusa Slicer but there are a lot of nooks and crannies making it almost impossible to get 100% coverage. I separated out 44 different…
The MK4's filament input has some threads on the inside, this tool you can simply screw on that filament input and it sits tight! No supports needed. Please check / ensure that the hole is 6.15mm in diameter. Then simply put in the…
This set consists of eight cookie cutters. The cookies put together create a beautiful motif that will not only decorate your holiday table, but is also suitable for any special occasion. You can combine cutters with and without a cutout…
This innovative 3D printable wall art serves as both a striking decorative piece and an effective acoustic diffuser, perfect for enhancing the acoustics of any room while adding a touch of modern artistry. The design features a…
The original design came from Flower Mosaic by Yuyuy75 - Thingiverse . I assembled the mosaic and then varied the height of the flowers so I could print it as a color print. Varying the height of the flowers also gave depth to the mosaic.…
Spanish Mosaic 4 Piece Wall hang. arround 14 by 14 inches square when combined. gcode inclued color changes at z height. Plan on doing an expoxy pour over the top as a test to see if a larger peice could be made into a table top. My idea…
Lion head - geometric mosaic
Caligula Pleasure Boat Mosaic. Here's a summary of the fascinating journey of the Caligula Pleasure Boat Mosaic: Origins: Imperial Pleasure Barges: The mosaic was originally part of one of two lavish pleasure barges built by the Roman…
I designed this grommet for use in the design phase of the Prusa Mini Palette adapter and never intended to print it, and then I found myself without any grommets. I did some work to make this more printable and made it in TPU. Then I…
Ankylosaur from late cretaceous Mongolia.
I was looking for a top plug that I could use to guide my spools that I'm drying (with my Sunly Filament Dry-Box: https://www.printables.com/model/85989-sunlu-dryer-ptfe-adapter) nicely into the printer enclosure, and this for the M6x4…
Do you also have a great amount of samples lying around? Okay, you could print another boat with it.... Or, you use them to create a mosaic of your choise. I've used a programm called PicToBrick…
Using the Mosaic Palette 2 with my Prusa i3 Mk3S+ , I first tried one of the available extruder clips based on a rubber grommet. But like mmontminy , I found it not very secure. But I couldn't use his MK2.5s-MK3s Palette 2 Extruder Clip…
Three mosaic snakes (two colours) 20 cm, 10 cm - wall art, coaster, matrix for graphics or for frottage
Es ist ein Adapter, der leicht entfernt werden kann. Dies ermöglicht dann den normalen Druck ohne Palette. Eine 1/8 Zoll Armatur ist erforderlich, wo der Schlauch ganz durchgeschoben werden kann. Diese Armatur kann dann oben mit dem…
"Mosaic" 2D Wall decoration Use only one perimeter for optimal results.
HexaFlex is more than just a coaster – it’s a creative, movable mosaic to play with, customize, and make your own. Mix colors, link tiles, and shape your own movable mosaic. Each tile is a hexagon connected by small flexible links that…
The MK4's filament input has some threads on the inside, this tool you can simply screw on that filament input and it sits tight! When printing you should have a minimum of supports on the buildplate for the first ring to get over, the…
To my surprice I could still not find a cool PTFE to Palette2 connector. So I did. It's quite simple: you need a pneumatic connector, whose M6 thread is screwed onto the Pallete2 piece. And the rubber 'washer' given by mosaic. I cutted…
This is an adapter to work with the Artillery Sidewinder X1/X2 and the Genius. It allows you to mount the Bowden tube to all versions of the Mosaic Palette 2 and 3. To install you need to remove the short piece of PTFE tube that is above…
This adapter allows you to mount a Palette 3 or Palette 3 Pro from Mosaic Manufacturing on standard VESA mounts for TVs and monitors. It is suitable for 100mm, 75mm and 50mm VESA mounts. It is designed for 12mm M3 screws and M3 nuts. I…
Un petit oiseau façon puzzle, géométrique ou mosaique à accrocher au mur, une fenêtre ou sur une porte. A vous de jouer avec les couleurs suivant vos goûts et styles. Imprimé avec une hauteur de couche à 0.2 et 20% de remplissage. Faites…
I was inspired by Matt Stultz background at the prusa live videocasts. Each tile will use a little less than 1 meter of filament. There are different tiles so you can get a clean outline or straighten the outer lines of your mosaic. You…
A quick, sub-1-hour print to test all extruders on the Prusa INDX upgrade for CORE One+. Print at a 0.2mm layer height with a 0.4mm nozzle. There are two versions: 4T: Four colors (black outline, white cat/dog + 2 mosaic colors) 8T: Eight…
this retainer is used by the mosaic 3 (pro) if lost or defect u can print a spare one. i would recommend to print it in petg 0.15mm height. after printing use a 2mm drillbit to open up the hole a bit (not tomuch) print 2 on each side of…
Found a cool mosaic and converted to SVG then to STL
I needed something to mark a region that was under the card's effects of Loyalty. This riser does the trick to single to the players. Easy print.
I designed this to use the Palette 2S Pro with the Prusa Mini (but will likely work on all models of the Palette). It uses one of the spare compression fittings that came with the Mini to ensure a secure connection. I have also made a…
you will need to print one Knurled nut and one adapter. Both print without support - adapter has some sacrificial bridging to remove with a small blade. thread a standard PC4 M10 fitting into one end, knurled nut goes over tube using…
Prusa MK3S+ printer filament sensor cover for Mosaic Palette 2S.
Reproduction of roman mosaic "king Solomon Knot. Printed in 4 colours with 4 ways Flux Capacitor Print Settings Printer: BFB IeC refurbished Rafts: No Supports: No Resolution: 0.2 mm layer Infill: 30% Notes: Category: Sculptures
A holder for all the pieces for one player. Each set - lid, cities tray, towns tray and figures tray - will hold all the pieces from the Colossus edition of the game AND the Wars & Disasters expansion. The set occupies the same footprint…
I couldn't find anything to mount my palette 3 to the ender 5 plus that was sturdy enough for me so I made one. It allows the palette to lay flat and doesn't wiggle too much. You may have to take the bottom screw out of the belt…
Mount your Mosaic Palette 3 (or Palette 3 Pro) on Ikea Skådis pegboard, upside down! It utilizes theeze nuts to screw in the plate to Skadis, and M5 screws to mount Palette to the plate. There is also a bottom support lip for extra…
Can be printed in any material. PLA is recommended for indoor use, use PETG or ABS for better heat resistance. ASA is recommended if the part will be used outdoors, especially under direct sunlight.
Palette 3 Pro upside-down stand 2022-04-17: Corrected mesh size of stand left 2022-04-17: Added version with little storage boxes and other printing emprovements (like on mosaic logo) 2022-05-07: Added version with holes to storage short…
I find the popular Ondřej Stříteský spool holder well done and good projected. His version doesn't fit all my need because I have a Mosaic Palette 2S Pro and I want it in front of my enclusore, so the spool holder must have the filament…
Inspired by https://www.prusaprinters.org/prints/56687-filament-guide-with-magnets I designed an attachment for my palette 2s pro. Since I don't use it all the time and my space is limited, I need to store my palette somewhere else. But…
I needed to run a 3mm ptfe tube from my polybox to the palette, so I came up with this little mount. use velcro so you can easily reposition as needed. The blue capricorn ptfe tube is cut at an angle. IT DOES NOT go into the palette. I…
Do you like gifts the recipient will love, but only after they've struggled to figure them out? Fellow slightly evil gift givers, enjoy the Mosaic Puzzle Ornament. I wanted an ornament version of Wim V's Mosaic Coaster as soon as I saw…
This is a small 50x50x50 mm box I designed that prints completely flat and is then folded and glued together (this can be optional with version 2). I used B7000 glue ( https://s.click.aliexpress.com/e/_c32k0v4P or on amazon…
Remember, the US government wasn't using chemicals on the peaceful protesters, they were just using capsaicin. Print instructions In 3 pinned pieces that can be assembled together.
A simple clip attachment for attaching the Palette 2 output tube to the extruder casing of the Flashforge Finder. Based on the Mk3 clip by MosaicResources, there are 2 versions. One to accept the rubber grommet provided with the Palette 2…
Remix of two other models. Used it for a few months and it works great. Printed using tree support.
This is a very colorful remix of @Harms3D's Curved Stone Pattern Tissue Box, adapted for multi-material printing, and scaled for the size of tissue boxes that Kleenex sells in this part of the world. Box size: 228mm × 123.5mm × 89mm. (The…
Remake of very old board game from 1969. It evolves kids imagination when they try to create own pictures with colored hexagons. In original game there were 6 colors, now you can print any color you want :-) The main board is set up of 4…
This coaster consist of 25 pieces. Puzzle it together! There is a open or closed version..
Interlocking tiles arranged so that 18 can be printed at the same time - takes about 3h30, just about gets them to a nice solid place where they can be clicked together without being too long a print.
Its an very old mosaic puzzle. Soon i will recreate an modified version of all other parts. With some blueprints PDFs.
Simple Mayan/Aztec Mosaic Pattern done in Microsoft 3D Builder
Filament Sensor cover for the Prusa i3 MK3S, with a grip-portion for the "Prusa i3 MK3 Extruder Clip": https://www.thingiverse.com/thing:3189590 Makes it easy to have a non-permanent adapter for the Palette and Palette+. Do a search for…
Puzzle of Escher's Mosaic I The puzzle was traced in Graphic on the iPad. That file was cleaned up in Illustrator and prepped for printing. I used a 2 pt line around each piece, which gives about .7mm of tolerance. That makes this easy to…
Minimalistisches Wandrelief mit einem quadratischen Raster-Muster. Zeitlose, architektonische Struktur für modernes Wohndesign. Stellen Sie Ihr Modell vor Dieses Modell ist eine Studie über Präzision und Wiederholung . Die Oberfläche…
Model Info/Description Tested! Note: I don't have multiple colors of filament so I just hand painted the tiles in the picture. Create your own Bauhaus style mosaic grid using the variety of tiles included. I've created a library of 30…
This easy to print clip mounts to the filament runout sensor on the Creality CR-6 SE printer and allows you to easily clip the bowden tube on your Mosaic Palette 2/S/Pro/S Pro to your printer. It accepts the standard grommet included with…
You can use 2 of those (hole version) to get a cable out of a 45mm mosaic socket.
The original model found on Thingiverse was pretty close, but the two bolt hols were spaced further apart and did need a little sanding. I measured my broken one and after 3 attempts got things buttoned up a bit better, at least for me…
Ersatzabdeckung für den Prusa i3 MK3S wenn man eine Palette/Pro 2 anschließen möchte. Einfach nur den Gummi einsetzen und man kann direkt den Bowden hinein stecken. Die alte Abdeckplatte kann damit direkt ersetzt werden. Print Settings…
Mounting for Ikea Skadis Pegboards Currently testing, use with caution Category: 3D Printer Parts
