Liczymy pasujące modele…
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 I’m a big fan of Gridfinity and magnets but the crazy filament cost to print the weighted baseplates to…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…
this system is fully compatible with standard grifinity models. Based on ZackFreedman design it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
The Clickplate is a Gridfinity baseplate that doesn't utilize magnets. Instead, it secures bins with four small arms per square. The grip is quite strong, as the layer lines interlock with each other. Here is a Video of it in action. Here…
organiser with grid pattern and removable separator 2024-05-18 update · uploaded a simple lid, to meet a request photos show printed in black matte pla and brick red petg-cf 0.20mm layer height 10% adaptive cubic infill dimensions > x:…
If you get value from my work, consider supporting me at stu142.com/supportme These Gridfinity baseplates are stacked and oriented so that you can print multiple at a time with no support. The baseplates easily break apart after printing.…
Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Frame: https://a360.co/38FBsJz Weighted Plate: https://a360.co/3uCJ2gR…
I wanted a 3D printed rose that had the following, Quick to print, Had everything (Stem, Leaves, Sepals), And connected securely together (with a bit of super glue). So after doing a bit of modifications to other designs and then putting…
Easy to print tool for separating stubborn Lego bricks. Supports needed. Good accuracy is required to produce Lego compatible bricks, please read this troubleshooting guide if you're struggling to get the bricks to stick together.
Update: I have now uploaded slightly improved versions of the planter and tray models. The tray should now have a snug fit with the planter, keeping it from sliding around and getting off-center. The pictured print was done in matte gray…
CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…
24/01/26 - V2 DEFINITIVE UPDATE Is buying a KO MP10 off aliexpress too easy for you? Do you already own every single iteration of this mold? Do you want to be a god? Thanks to the amazing updated original file by Petergross3, I'm proud to…
PLEASE GIVE THE MODEL A LIKE This is a parametric Gridfinity Base plate that is a full rebuild based on Zack Friedmans original designs. It has Parameters for the width and depth of the drawer as well as how many gridfinity squares in X…
This model is made by: DoksterCat (me) My SketchFab page: https://sketchfab.com/dokstercat My Printables page: https://www.printables.com/@dokstercat_1161528 The LEGO body can are be separed or you can just have the full body. :)
V2: Version 2 is now available! The pinch grip has been removed and replaced with a hook to launch the glider with a rubber band. A rubber band holder/handle is also included. (Gif of V2 flying has been added at the bottom of this post!)…
Gridfinity baseplates completely remodelled from scratch, designed to minimise print time. Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS. Sizes 1x2 to 5x5.
Gridfinity base plates with adapters to lock to honeycomb wall. Be aware of weight of load of lager baseplates. This project is based on https://gridfinity.xyz/ If you want to support me, please buy me some filament .
This is a remix of the gridfinity baseplates by josh.hall - https://bit.ly/JHGridfinityBaseplates who did an awesome job with his version of the baseplates. Versions The modular baseplates come in two versions: Baseplates that can attach…
Edit: I just found out that @jerrymk_985120 made the OG Clickfinity . That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did. Recently found NoWarrenty's…
Gridfinity is the popular Modular Storage System invented by Zack Freedman. This is a remix of his baseplate . There are already many great remixes of this baseplate out there (e.g. Gridfinity Screw Together baseplate ), but I could not…
January 31-2025 Version 4.1 released! Version 4.1 is released! minor mods and tweaks! November 26- 2024 Version 4 release! (note - v3 and v4 lower cone is the same(NOT V4.1!!) , only the upper inlet/outlet section is new so you can reuse…
This construction is a logical continuation of one of the first options. The community likes it, apparently because of its low profile. It seems more stable. Our friend Der_Rudi asked to increase the gap for better throughput. Now it's…
Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…
You need to print this 4 times. Position the extruded sides to the outsided where the screws for the drawer mechanism are. It's a perfect fit but a bit of superglue wont hurt. The Grid is 14x10 and up to 8 height on the smaller drawer and…
Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…
I changed: • the location of the tail is moved lower; • the shape of the back handle; • my top handle (shape closer to anime); • my tail cord; • made a model of supports for the tongue, teeth and rear hole for the back handle. It is…
When stacking several bins on top of each other it can be a bit tedious to access the lower bins. Especially when you place the bins in a box like in my IKEA Samla Gridfinity series (…
This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…
Gridfinity baseplate for Makita MakPac Support needed (Someone printed it upsidedown and it worked but I didn't try) It does not fit in the MakPac type 4 (sorry el_flexos ). I'll try to create a new version for it. Makpac Case Type 1…
i separated the wings and base
The translucent bins with little removable dividers are HORRIBLE when it comes to keeping parts separated. When closed, parts can jump between bins, which drives me CRAZY. This design intends to fix that. At the top of each wall is an…
Automatically generate Gridfinity templates of any size in FreeCAD , the free and open source parametric modelling software available to anyone at no cost. Check www.freecad.org . The models correctly implement all features included in…
Wanted a thicc cowboy Fred the frog but with a baseplate so I remixed it. I printed it on a Bambu Lab P1P with 0.4mm nozzle, 0.12mm layer height and auto tree supports for the hat.
Baby Deadpool is my first design where I'm offering separated parts along with the usual files. Just use our separated parts, slice, and print them. After printing, fit the parts in their place. If they feel a bit loose, you can use some…
These Superlight Baseplates , whilst printing fast and clean, lack weight and slide around easily outside of drawers such as on desks and shelves. I've taken the aesthetic of the base from the Mini HSW x Gridfinity Organiser and made…
This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to separate the model, orient in the best printing direction, do a little clean-up, and then publish them as ready-to-print. A…
Full credits goes to https://cults3d.com/en/3d-model/art/chicken-park-natcko I didn't want to paint this and I didn't manage to change filament color during print, so I just cut the original file in 4 new files. Just print each file in…
Version 3- new, even bigger and better cyclone dust separator! This is still a beta! thou it is fully functional! Assembly info and such will be added later, newer versions of the top cap may get uploaded ** note- will need a 300mm build…
This is an enlarged base for the opoular Makita RT0700 Handheld Router. It makes it easier to guide the router on narrow pieces or at the edges. For a full description see my blog:…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Introducing what I believe to be the perfect Gridfinity baseplates with a good balance between functionality while lowering material use. Quick Video Guide I wanted baseplates that could be used standalone or fit together to create one…
Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…
Egg yolk separator for cup/jug sizes 4-7mm
It was printed with 0.6mm nozzle but smaller the better. I recommend using PETG, but it works with any prusament just fine. :D *updated: V2 version added
Model Overview This download includes two versions of the articulated Red Panda: Multi-part version designed for single-color printers with post-assembly . One-piece version designed for multi-color printers Multi-part version where u can…
18.08.23 Update: I have added a v2 with slightly optimized filament usage and 2 more screw holes (to make it easier to screw down in different locations if need be). My design for a lightweight, filament-efficient version of a 5x5…
This model is compatible with the lego system.
Remixed the Annoying Gift Box by u: LittleCoolBomb : sized in mm. separated the lid from the threaded tie segment. provided split bow for easy, support-free printing. added clearances of 0.3 mm for the tie segments. provided a faster…
I split the katana and blade so that you can have the blade and handle different colours. Print instructions Print the blade first in the color of your choice. When slicing the Handle, add a "Color Change" in PrusaSlicer at 180mm just…
This is a model of Final Fantasy 7 Sephiroth in simple polygon form. This model has already been scaled to match my other prints. His hair part on the front is difficult to print, so there is a separate model that piece of hair in case it…
Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I re-created this model for Hamm, from Toy Story. It was made from scratch following some online images as references. This V2 model has the eyes and eyebrows separated so that you can print them in a different colour! To print I…
Źródło oznaczyło ten model jako treść 18+.
Bigger joints made to last, and easier to break free when using a larger nozzle. Or it can be made smaller with standard nozzles and still work. The earlier comments may be correct about some of the gaps being too wide, when printing…
I made this cyclone separator. It consists of five parts, four of which were 3D printed. The last, the top piece, was made out of acrylic on my CNC router so I could see inside but it can also be 3d printed. In my test it worked…
I cut the 7x10 grid baseplate that fits the IKEA Skinny Alex (9 drawer) into parts for smaller printers (like my Ender 3s). You will need to print 2 of each file for one complete drawer. All parts are interlocking and reversible.
This is just a set of @kennetek_364826 's openSCAD thin baseplates to fill up and Ikea Alex drawer and fit on the build plate of an Ankermake M5. The picture shows regular thin baseplates (5x3, 5x4, 3x4, 3x3) in red and the backfills…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
By Jace1969 on Thingiverse . Seperated into their own files for ease of slicing/cutting further.
English The 3D4U Valuables Separator. A versatile helper when it comes to separating large and small items. Whether you are vacuuming your kitchen drawers or a rucksack, looking for a lost earring in the carpet or vacuuming a pile of…
Rugged Box adapted for 3/4/5 passports In the pictures you see 4 german passports with standard dimensions ---------------------------------------------------------------- 11/05/25 - Files added for 3 passports…
This is bolt action pen inspired by Chassepot 1866 needle rifle. designed for 107mm refill no glue required supports included 0.2mm layer / 0.4mm nozzle / 20% infill EDIT 3.3.2022 :New improved bolt. If you like this, buy me a beer ;)…
Pey's design does not fit my drawers well and requires severe modifications to make them fit after printing. I had to saw more than 3mm off the back and sand around 1.5mm from the sides. I wanted to do quite a few drawers so this was a…
Check out a video about my project! I tried to use 3D printing to speed up production on a laser cutter. A simple cyclone separator that can be easily printed within 20 hours saves you money on bags and works amazingly well!
Background I set out to make this remix because all the other track clamps I printed and used would break at the same spot along the layer lines on the sides of the square pieces that interface with the tracks (see picture below). This…
Tired of gloopy overhangs? Need to mount gridfinity organizers on an IKEA skadis pegboard? Welp, here it is! Remixed @glitchprinter's 2x4 baseplate with four ikea skadis universal mounts. --- Parts used in this remix Magnetic Frame - 2x4…
I made this F3D file very easy to mod for the press fit of the magnets. If you go into the sketches folder and open the ( Magnet Holes ) sketch you can adjust the hole size to best fit the press fit for your press fit needs.
For the massive weebs out there. This is a high quality, 1:1 accurate version of the Spy's Conniver's Kunai from Team fortress 2. Designed as a prop replica (not a weapon), that you can simply print and put together. full size : 34.6cm x…
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher. 🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Added a mounting hole for a nail/screw in the base and made sure the base of the head was actually flat. The original remix's head was slightly askew. Photo is printed at 200%. Category: Sculptures
Collapsing Katana all the parts separated. No vase mode Required.
9-4-22 Added the seperate files for each individual piece. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 38 Filament: PolyMaker PETG Category: Props
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Gridfinity baseplate for the Ikea Råskog utility cart. This is a recreation of Zack Freedman's gridfinity system. Update 18/07/2023 Box for the corners Print Settings Printer: Anycubic Vyper Rafts: No Supports: No Infill: 10 Filament:…
Gridfinity baseplates with slightly smaller (6.5mm -→ 6.09mm) magnet holes. I use this jig and a hammer to add the magnets. No need to wait for glue, and you can poke the magnets out from the other side to recover the magnets when done!
Mounting for Voidstar Labs' Gridfinity containers on pegboards without wiggle? Heck yeah! This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick…
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 Also inspired by https://www.printables.com/model/250550-gridfinity-magnet-light-baseplate Optimal settings:…
This is a baseplate for the Gridfinity modular storage system by Zack Freedman that fits in a L-Boxx Mini organizer box. It's based on the L-Boxx Mini inner volume model that can be used to make custom L-Boxx Mini inlays that fit…
It's a 0.15" hole, meant for a screw bushing I also added just the rail, [so that people could add the railing to their existing dust covers. It is a 0.15" hole with a 0.25"(width)x0.1"(depth) bore head] and just the dust cover
My custom baseplate and my re-made hexagon together. For people like me who ran out of baseplates and who have more minifigs to put up.
V1 - untested - 2x3 and 1x2 Gridfinity Baseplates adapted to Multiboard system - untested - tested: 2x4 Printed in clear resin it fit too loosely into the Multiboard octagon tile, but with a bit of glue it now holds a 600g bluetooth…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate Post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
This is the original Zack Freedman gridfinity baseplate design. I did NOT create this design, I am only reuploading it as I was unable to find it on Printables. All credit to the original owner.
This model is based on the Gridfinity baseplates by Zack Freedman. You can find the original model here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925 I really like my version of the Gridfinity modular…
This is my rework of Prusa MMU2 PTFE Tubes Separator by fucosk https://www.thingiverse.com/thing:3166394 I just rounded off the corners a bit
Cyclone Seperator for Festool Vacuums This is my custom version of a cyclone seperator for Festool vacuum cleaners. The goal was to build my own, cheaper version of Festools CT-VA-20, while maintaining the core functionality without…
For experienced makers. Remember this is a free file. Ready to get your socks sucked off? This is a handy dandy, print-it-yourself cyclone! If you are looking to upgrade your dust collection system, we highly recommend giving this design…
Gridfinity is configurable. How about a configurable baseplate? This is a snap together, reconfigurable baseplate for Gridfinity. You can print a bunch of 1X1 baseplates and a bunch of clips and then assemble them to whatever size…
Coaster set remix
Introducing what I believe to be the perfect Gridfinity baseplates with a good balance between functionality while lowering material use. Quick Video Guide I wanted baseplates that could be used standalone or fit together to create one…
I absolutely LOVE the box design from @Jamie and really wanted a version with all small compartments of the same size. So I made it in TinkerCAD real quick. I've also included the 3 pieces in separate files, as well as a file with all 3…
Separating trays for reloading brass, pulls out 45, 40, 9mm, and I added the separate 380 version. You want to stack them as they are labeled as follows, from the top down: - 45, 40, 380, 9mm, and base. The trays stack, just pour in the…
I separated the files as I too was looking for a couple of pieces out of this assortment the original creator made. I've included his original file in the STLs as well, most of files in the original seem to repeat so that is why there are…
I couldn't print the original part with my printer, so i drew it up in Fusion 360, so that i could split it op into 4 parts. The original has holes for magnets, which i don't intent to use, so i didn't model them. If i'm needing som kind…
EDIT 2022.12.04: -added second file called separator. It is meant to easily separate the magnetic jig from magnets so you do not pull them out while the glue is not fully hardened. Usage: 1. Put jig into the separator 2. Put magnets on…
![Gridfinity baseplate [2x4] with Skadis Universal Hook mounts for IKEA pegboard](https://media.printables.com/media/prints/470819/images/3857666_7ac9f740-3494-4946-9ed0-4cf2565ed3cb/img_8401.jpeg)
