Liczymy pasujące modele…
I remixed n.leinad great design to make it a bit more of a workhorse. I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable…
Shortened 9mm to better match toothpaste tubes common where I live. Now fits tubes up to 60mm wide. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Notes: Translucent blue printed in…
Dummy 13 Swords Shortened Handles resized 200% handles were shortened to fit better with hat accessories
Dummy 13 Swords Shortened Handles resized 250% shortened handles to better fit hat accessories
This is a remix of the Smol Bottle Opener where the part that pushes the cap from above is moved closer to the handle, creating a different lever angle. Printed successfully on Prusa Mini+ with settings: Prusament PLA Layer height: 0.2mm…
Here is my simple foot or bracket for an Ikea LACK table with screw hole for use if you want to shorten the size of the legs. Ikea LACK table legs are hollow after the first 35mm from each end and need a foot or bracket if you want to…
Sometimes your lamp needs to hang a bit higher. If cutting the cable is not the solution you're looking for this elegant shortener may be of help. In fact it makes a loop in the cable which is neatly covered up by a lid. The place…
I have some hanging lamps above my diner table but they're in the way when I want to fold clothes. I designed this cable shortener to be printable without supports, be elegant and to use little material. My cords are 6mm but the design…
Shortened length of end part to make it easier to connect. Simplified the design to allow upside down printing. Print Notes: Orient upside down. Use plate supports for snap lips. If you plan to print high temp filaments, print the…
SEE REMIX IF YOUR VULTURE KIT USES THE DRUM SPRING This is a full replacement for the entire front-assembly of the Vulture blaster. This means that every part of the breech, barrel, and magazine assembly have been redone. The only…
Note: original mod is https://github.com/VoronDesign/VoronUsers/tree/master/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber also found on Printables at…
The LCD mounts that shipped with the MK3S+ annoyed me with how far they stuck out past the frame. These mounts are 1/2" (12.2mm) shorter, allowing the LCD to sit closer to the frame and thus making the overall foot print smaller. All the…
Shortened the original Dan Pistol by 50mm overall with a 25mm reduced draw to improve flubbing at low fps. Comfortably hits 100-130fps with small sections of k25 spring and a barrel flush to the shroud. Length Changes: Shortened: slide…
I printed a bunch of eric-ao's safety locks for my own drawers but ran into a few cases where the gap I had was just too narrow. Simply height adjustments to make it fit in some tighter spaces more easily. Printed at .2mm layer height in…
Shorten cables for your hanging lamps.
This is a device for shortening the wire or cable of a pendant light. You wrap the cable around it and feed the ends trough the hooks. More turns, shorter wire. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
This is a handle that can be used to shorten a leash for walk-training a dog to help increase control and avoid buying a whole bunch of different length leashes. When dogs are young, they need a very short leash to learn to stay close by…
I had the same problem as one of the other commentors. Once printed, the frame was slightly too large to fit on top of the X1C. I removed 1.5mm from each of the rear pieces between the last vent hole and the corner. The glass still fits…
Remix of Jallims Handle V1 with a bigger gap between shelves for easier sliding
Lamp cable shortener for a 6mm cable. Feel free to design some inserts for the inner diameter.
This is a replacement for front shortened mudguard for Triumph Thruxton for a sportier look. Should be printed in ASA for UV durability.
Angle the model on the print bed and it will fit a typical prusa MK4 style print bed. See original post for the rest of the model.
This is a modified version of the Tesla Model Y rear seatbelt guide (original model: https://www.printables.com/model/251256-tesla-model-y-rear-seatbelt-guide ). The original model had a length of 264mm, which exceeded my printer's 260mm…
2.5mm worked best after my measurements, If someone needs a slightly different size I also added 2mm less and 3mm less.
I shortened the Center Dock by 5mm, because my DragonBurner Toolhead with the integrated ZeroClick Mount didn't reach the parked probe fully.
I extended the length of the original model to shorten a cable for around 40cm
Hello everyone! This is a 3D printable Nerf N-Strike Barrel that I have designed to resemble a shortened Nerf Recon/Retaliator Barrel. I’ve always loved the look of the N-Strike line of blasters, and arguably the most emblematic part of…
Howdy, still a learner at 3D modelling, I have today my attempt to create a shortened more pistol like variant of the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005. This is my own design using the game blaster…
This is a headphone cord wrap specifically designed for the Bose AE2, but should work with any cords that are ~1.7-2mm in diameter. I find the stock cable way too long and this was an easy solution. When importing into slicer, I suggest…
A watch band shortener tool remixed from two designs that requires only a metal pin. In picture a 1cm needle part is used (half of it goes deep inside to keep it firmly) which works really well. You need a base, pusher and a knob. There…
This is a handrest for the SpaceNavigator Desktop edition. Your SpaceNavigator won't move around anymore when using it! I made DarthBane's model a bit smaller so I could print it on my Prusa Mini. You can either cut the pad out of foam…
Printed in ASA. Printed 12mm camera mount screw to attach camera, but not necessary. Camera fits tightly.
AX24 - Shortened Aftermarket Servo Mount - Remix Shortened Aftermarket Servo Mounts for the Axial AX24. A couple of mm was trimmed off of the front of the original, moving the servo closer to the center of the vehicle, which seemed to…
About I remixed the router attachment brackets from ayanev ( https://www.printables.com/model/249532-ikea-skadis-wifi-router-attachment-bracket ) to allow for mounting without screws. I shortened the wings to fit some of my smaller…
Howdy, still a learner at 3D modelling, I have today my attempt to create a shortened more pistol like variant of the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005. This is my own design using the game blaster…
I've shortened the end caps for the repwinder. For the locking screw version, I removed the ratchet as that should only be needed on one side. I then shortened it by 0.8mm. For the other end, I also shortened it by 1mm, and left an indent…
This model will shorten your cable by 28cm
This is the same model, but shortened by 15 mm to fit in size for 220x220 tables (like Sapphire Pro).
I had to remove 2 links of the drag chain that came with the SV08 enclosure kit due to the length of the stock cables. This prevents the Z gantry from reaching the last few mm of Z axis height without popping out the stock drag chain…
This remix provides a shorter version of the “d1 gear and axle” that is part of the “Orange D-Axis and C-axis” folder for the Antikythera mechanism. When I assembled my clock, I found that the d1 axle stuck out the back of the D2 gear and…
After i added the MMU2S to my MK3s i needed another Lack-Table to hold the Spools. I want to store the spools underneath the Printer with a drawer for easy access. As i dont need the full lenght of the Lack table i will shorten the legs…
Shortened to fit on a 300mm bed.
For whatever reason, some printers are about 25mm shorter between the IFS and enclosure hole. I shortened it to fit.
PC4m10 rear connector threads for the MMU3
Print with whatever layer height, 40% infill, 2 perimeters minimum, I recommend HTPLA (PLA+ / PLA Pro), but PETG and other slightly flexible filaments should work too. I have not tested in standard PLA. Assemble by sliding the two halves…
T300 hall sensor, shortened version
For a 3D printer table I wanted to use 2 Ikea Lack 50x50 tables. 2 times 45cm height would be a bit too much, so I shortened the legs of the bottom one of the two tables. In order to regain stability and for leveling the setup, I designed…
I modified the original version to allow a bit more space to work with Nadir's CN3D shrouds. To work with the M12 probe. Print in ABS. It will use the same hardware as the original design.
(See original source model for printing instructions.)
I've cut off the IKEA LACK legs to 10,5cm and have inserted these feet at the bottom of the legs. My printer might have been a bit out-of-sync when printing so the dimensions might have to be adjusted a bit. If you print it and it doesn't…
Remix of: Fully 3D printable snow shovel-ice scrapper by Ematyk | Download free STL model | Printables.com I shortened the extension piece and the shovel head to fit in a 256x256x256 build volume in printers like the Bambu Lab X1 & P1…
Modification part. for Dollfie Dream III body. shortens the torso by 5mm to reduce the waist seam gap, and give some variety
The original Smiley Blaster stock was a bit too long for my 8-year-old, so I created a shorter version in Tinkercad
Shortened the original model and made the rack mounts slotted to allow some wiggle room.
I had a problem with a lamp hanging too low so I was hitting it with my head all the time. Grew tired of it… so enter a ceiling lamp cable shortener.
Prevents the cushions from sliding/creeping forward.
just shortened the claws so the can be printed on a 200x 200 print bed but still fit in handle
Just a shorter version of the original.
Uses RedCowl's fantastic barrel collet dev kit for barrel retention: ( Link ) The two big parts print muzzle-down. The lid (green) prints with the rearward-facing angled side on the bed. The little yellow hook prints on its side. Rail…
Shorter Godox Bulb Cover, specifically designed for DPIIIV Series Studio Lights. Likely compatible with many other Bowen mount compatible lights but I unfortunately do not have access to them to test. These were specifically designed with…
Print in 100% infill with ASA for UV resistance. You will need to buy alternative nut to secure the part to the rear indicator housing. The original version showed in the picture is may block certain hard/soft panniers luggage which…
UPDATE 1: Added tighter fitting lid. This FFC Barrel allows you to shorten any flat flex cable no wider than 16 mm to the desired length, without cutting the cable. It includes a small hole in the bottom which allows you to fix it in the…
Overview and Background My lamps were hanging too low, however I didn't like to cut the cord shorter because I wasn't sure about the optimal lamp height. This was more fun Edit the cord thickness or remix in general at Onshape
A simple shortened case foot design to let the Thermaltake V21 fit inside an Ikea Kallax or Expedit shelving unit. There is enough room left to put adhesive felt furniture pads on the case feet to reduce vibration and prevent scratching.…
I was having y-axis collisions, so I remixed M3D's mod of Rons' tensioner and the one-piece holder. My remixes are here - the tensioner and the holder (this model). After installing my modified housing I did not actually need this…
I shortened the fixation part to accomodate stiffening mods of the playseat challenge with it Here are the mods I am talking about: Brace https://www.thingiverse.com/thing:4944013 Joint Stiffening https://www.thingiverse.com/thing:2772442…
The location of the of the BLtouch sensor was a bit too far to the right for my liking. I've shortened the arm a little.
(Almost) universal filament guide A bit of backstory I bought my first 3D printer a few weeks ago, already thought about and made some upgrades to it, but this is the first visible one. As a lot of you, I was tired of seeing my filament…
I needed a shorter version that would fit my printer and didn't need the drill holes as I'm attaching with stickies to my wall. Fusion drawing also included. approx 110x56mm Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2…
I received the updated Version of the K40 Laser (Vevor type with digital reading, emergency stop, light). It also had a new exhaust fan assembly, which is screwed directly to the exhaust duct. To fit the motorized lasertable…
Gym rope handles are uncomfortable, so I created this. Increased handle surface area for comfort. Hold the top of the handle to grip higher (shorten rope). Contains two versions for different nut size Hardware: 8 m4 screws with length ≥…
This is an very simple yet effective helper to shorten any too long straps without a sewing machine (and temporarily, because your body might change) It's made for a 38mm Strap - to adapt it to any strap size just scal Z-height Category:…
The original Headset band was too long for my head - or become enlarged over time. This model can be used to make the band shorter. If you need it even shorter, you can use two or even 3 models on the band. Material: PETG for its…
While the original was excellent, it posed a problem as I had to use my firing hand to turn the GoPro on before drawing. Now I can use the index finger on the support hand to turn the recording on. Recommended print settings are the same…
Rack Shelf for CRS305-1G-4S+IN but shortened to save fillament, and mirrored to show the status lights better.
A shortened frontend for the Talon Fang Mk2. Made the priming handle on the side to reduce weight and size. An optional lower magwell is included to make it look like the normal talon claw magwell. Hardware- 1 top front threaded rod of 6…
Alternate plunger and ram mod for Alchemist which allows it to use shorter springs with a shorter prime, to hit lower FPS. Its meant for HvZ or other low-cap gameplay. IMPORTANT: In order for the ram to cycle correctly with this shorter…
Simple part whipped together with tinkercad to provide another mount point for shower head. In this case the “slot” tapers from 22-24mm and the handle was around 25-27mm. I printed with 3 perimeters and 15% gyroid using PETG
I wanted a pi cam mount on the Z axis, similar to the one for the ender 3 https://www.thingiverse.com/thing:2886101 I added grip points to the shortened end stop to allow for the cam mount. I used a M3x8 bolt to secure the cam mount, but…
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
It took a few iterations to get the right thickness and dimensions, designed from scratch to get the smallest footprint possible. At the time I only had a light filament so i first tried to darken the filament with a sharpie which didn't…
The idea was that short side latches allow you to open a box and all the other boxes on top move with the lid.
A Template to cut the Rings of a horn Button to sit flush with the steering wheel. this template will work for 5 mm Steering Wheels. Please make sure that the cutting Template and the Ring are both laying on a flat surface (important for…
If you replace the pickup cartridge on a Tefifon (like here ) you might find that the tracking force is too high. The adjustment range of the original mount for the spring/dampener-combination is limited: So I designed a 3d printed…
A shortened Trivictus EasiestSCAR! I only shortened the area that clasps around the barrel to allow for more clearance for shorter barrels against the body of a blaster. The “shorteneder easiest scar cylinder” is the shortest of the 2…
The original (now not available) was extended, and now the extended version is shortened by 7.5mm to fit my faucet and sink.
Similar to other brands, this shortens the cable more neatly than the included do-hickey Category: Audio
Shortened middle part
Creality K1 / K1C / K1 Max Shortened Cable Chain Toolhead Mount Optimized Clearance: Engineered for the Creality K1, K1C, and K1 Max to reduce the mount length by 8 mm (shortened from 25 mm to 17 mm). This creates a tighter cable chain…
Thanks to thebeetleuk for the original set! I really appreciate the work. This is a remix for my desires. In the listed files, the grommets are shortened to 1"/25mm deep, save one that is deeper. This deeper one is intended to hold a cord…
This is a shortened front end for the Levergun MK3 to allow a bcar to be fitted on the barrel. This however reduces the tube capacity to a 7 shell config. It mates perfectly with a 31cm barrel. Meant to use a gfz bcar or any bcar with…
Shorter picatinny handstop When using my front rail mod , it is flush with the front of a JPhage
Print Settings: Printer brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0.10-0.15 Infill: 100%-20% Cubic Walls: 1.8-2.0 Filament brand: Overture Filament color: Black Filament material: TPU (95A)
I took the TPU band for Atriculated Snowman by Mordiev and shortened them by a half inch (medium) and inch (short).
Non-destructive curtain shortener (no need for a cut). Useful for my another model - https://www.printables.com/cs/model/727156-blinds-wheel-kolecko-na-zaluzie
Some users such as myself have found it difficult to source 330 mm rods for the z axis, but can find 300mm ones readily. This remix provides a shortened back column connector so that we can use the shorter rods. You will lose one zip-tie…
I ordered the wrong POGO connectors and didn't get them holes, modified the model to fit these connectors: https://nl.aliexpress.com/item/1005004407370088.html?spm=a2g0o.order_list.order_list_main.94.660d79d2kWXC9y&gatewayAdapt=glo2nld…
After I purchased and installed this fridge in my apartament it turned out that the stock handle would either collide with the cupboard next to the fridge or, if mounted the other way, collide with the windowsill, making it impossible to…
