P
Printables
Caliper-Claw brand caliper wall mount for VHB or command strips
i used pla. obviously no supports
Wyniki wyszukiwania: strips
Liczymy pasujące modele…
P
Printables
Funko Pop Regal für "tesa Powerstrips"
Ein Regal für verpackte Funko Pop-Figuren. Die Rückseite wurde bearbeitet, um so "tesa Powerstrips" anzubringen.
P
Printables
URBI splited for V0 print size with closed led strips wire channels with ecas fitting
remix of the previous version closed off the cable channel more and added an ECAS option + tried making it editable again for the connecting hexagon refer to the original
P
Printables
Longboard Wall Mount(command strips)
This is a drop through long board wall that works with command strips. You should print two, one for the bottom and one for the top. When attaching to your wall make sure long board is resting on both the top and bottom mounts to ensure…
P
Printables
TRMNL Wall Mount with Recessed 3M Command Strips
Updated 4/23/26 - Includes version that lets you keep the metal stand attached.
P
Printables
Plastic bottle cutter into strips (Remixed by @Paulovic)
To switch between the 7 mm or 11 mm widths, simply rotate the blade holder. My print settings: Printer: Neptune 4 Pro Layer height: 0.16 mm Nozzle: 0.4 mm Infill: 15% Speed: 150 mm/s Supports: Only in the larger hole Filament: I used PLA…
P
Printables
Aqara Zigbee Door and Window Sensor Mount (3M Command Strips)
This is a mount for the Aqara Zigbee Door and Window Sensor which allows the quick and temporary mounting to the door and door frame. It is designed to work with the small 3M Command Strip refills for mounting the magnet to the door and…
P
Printables
Target Stand for 1x2 Furring Strips (USPSA Style)
This is a target stand I made for 1x2 furring strips. It was inspired by this model from CitizenGreyArms: https://www.thingiverse.com/thing:5448274 The only functional differences are my part is more light duty, uses about half the…
P
Printables
Wall Hook/Mounts for weapon props, lightsabers, swords... (To use with command strips)
There is an inset space in the back to put the command strips so that the mounts are flush with the wall. The original size fits a command strip side, but scaling it up works fine too. Try scaling it up if you need to mount larger…
P
Printables
Montageplatte eines Schalters für LED-Streifen für das „PrintClosure-Project”/ Mounting plate for a switch for LED strips for the “PrintClosure Project”
Um die LED-Beleuchtung des Gehäuses zu schalten, habe ich Montagematerial für diesen Schalter konstruiert. In die Seitenwand des Gehäuses werden Bohrungen mit einem Durchmesser von 26 mm und 3,5 mm angebracht. Das einfache Schutzgehäuse…
P
Printables
Skate Deck Holder (Screws or Command strips)
I have wanted to put my old skate decks up on my wall for a long time now, I feel it shows my progress in skating and also adds cool decoration to my room. This is my solution that i made to put them up. I designed them myself and made…
P
Printables
WIRE HARNESSING STRIPS
This is a wire harness management system designed in Creo, based on a snap-fit mechanism that allows one part to securely attach to another without additional fasteners. The interlocking design ensures firm retention while still allowing…
P
Printables
FreeGrid Storage Grid Using Steel Squares And Magnetic Strips
After first looking into making some grid-based storage, I found that the cost of neodymium magnets quickly adds up. Sourcing magnets locally, the 8 magnets for one square would have cost ~2€, and a single drawer or shelf could end up…
P
Printables
Trennstreifen für Ordner A4/Divider strips for A4 folders
Diese STL-Datei enthält einen praktischen Trennstreifen für A4-Ordner. Der Streifen eignet sich ideal, um Dokumente innerhalb eines Ordners übersichtlich zu strukturieren und verschiedene Themenbereiche sauber voneinander zu trennen. Der…
P
Printables
Rotary cutter handle for cutting strips
A quick and dirty made rotary cutter for one blade on each side to cut stripes. As it is will cut 10mm stripes. You can add more washers to increase the distance. You need: two rotary cutter blades 45 mm 608 ball bearing (22x7mm 8mm hole)…
P
Printables
Twisty strips pendant lamp shade
Had the Ikea HAVSDJUP cord mounted in my office, and had no lamp shade. Fiddled around with Make My Vase, and created this. Added a 40 mm hole (negative modifier) to mount it on the cord, plus my logo (as a cutout for ventilation).…
P
Printables
Parametric Seed Starter Cup with more air pruning strips
These are the standard size 0.4mm nozzle seed starting cups, adjusted to have more air pruning surfaces by adding cut outs on all sides. It takes a few minutes extra to print due to the gaps, but it does use less filament.
P
Printables
Window Retainer Strips for Andersen Doors
Replacement window retainer clips that fits Andersen doors (my door at least) Scale it to the tallest your printer can handle, with a brim if needed.
P
Printables
Picture Frame Hanger for 3M Command Strips
The STL file is for the Large Command Strip. For Medium size Strips scale to 76.19% or there is a 3mf file with already scaled one.
P
Printables
Nintendo Switch OLED Dock Mount for Command Strips
Print two, slide over the ends of the dock and stick the flat side.
P
Printables
200μl microtubes and strips stand
200μl microtubes and strips stand. A useful tool for photographing colourimetric LAMP results. This model is composed of three parts. The stand itself, a strip for the 200μl tubes, and a budget light diffuser. To utilize the light…
P
Printables
Creality K1 LED Light Strips Addon for Hexagon Accents Risers
I wanted more lights for my K1, so I designed these as an addon for my Hexagon Accents Risers, found here Hexagon Accents Risers for Creality K1 These were designed to fit a 200mm strip of LED lights and were made to pressure fit into the…
P
Printables
Flashforge Adventurer 5M (AD5M) LED Light Bars mod accessories - mounts for 5050 LED (2 strips per mount bar) v1.0
These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…
P
Printables
Small Shelf with a Compartment For 3M Command Strips
This is a small shelf, with a usable area of 153x95mm and a compartment which is approx 35x90x155. The compartment is only accessible during installation in this version , since it was thought that the excess cord for the device on the…
P
Printables
Small Shelf with a Drawer and Cable Stash For 3M Command Strips (Multiple Versions)
Update 10/5/2024: There are now four versions of this shelf, with 4 types of those versions for a total of 16 different possible designs (more if you use the custom hardware drawers). This is a small shelf, with a usable area of 153x95mm…
P
Printables
Minimal colorization jig for PET strips
This is a very minimal jig for sliding a cut PET bottle strip through to colorize it before turning it into filament with a pultrusion machine. Just hold a wide-tip permanent marker against the strip through the window and pull. The…
P
Printables
Hook for Tesa Powerstrips
Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year
P
Printables
Brass Nozzle Scrubber Brush replacing with Silicone Strips
I need to replace the brass brush in my VORON that I currently having issue with. the brass wires on the scrubber was dislodge on to the print bed as it getting old and ruin my print bed. after came across other model here I borrow they…
P
Printables
7-Segment Clock for LED strips
I didn't have a bunch of those little LED's but I had a surplus of LED strips.
P
Printables
Sovol SV08 Bed Riser Strips (Taco bed fix)
I created this to help with the Tacoing of the SV08 bed. Some of the Sovol SV08 beds center along the Y axis is lower than the left and right side on the Y axis. This causes the Taco effect. I made 320mm x 25mm x 1mm strips that when…
P
Printables
Wall Mount 8bitdo Ultimate C for command strips
Simple Wall Mounted 8bitdo Ultimate C bracket to be used with command strips. Command strip part number : 17204-E…
P
Printables
Magnetic holders for tp-link Tapo P300 power strips
EN (en Français plus bas) You'll need two or four 20x10x5 mm magnets, depending on the desired magnetic strength. And for those who don't know where to buy them, I can only recommend https://www.123-magnet.com/cat-aimant-n-odyme-303.htm .…
P
Printables
simple wall mount for double-sided self-adhesive strips (no screws)
English This is a simple wall mount for double-sided self-adhesive strips (e.g. tesa Powerstrips). I used it to mount my speakers, weighing 204g, and it holds very well. You can also use the board for figures, etc. The plate on the photo…
P
Printables
Hangable trash can hangsystem remix for tesa power strips (or similar)
This is an alternative version of the hanger for Snowstorms excellent trash can. It fits three Tesa 2kg Powerstrips or similar instead of using screws. It's perfect for bathroom tile or painted walls. Roughen up the hanger surfaces for…
P
Printables
LED-Controller Box (for LED-strips)
Stores your LED-Controller and puts the IR-receiver in a convenicent upright position.
P
Printables
Greys' Flexture Cat6* Cable Comb - REMIX for 3M Command Strips
This is a remix of Greys' Flexture Cat6* Cable Comb , which allows using large 3M Command Strips for mounting. This is the version that can hold up to 12 cables. There is a 3MF Bambu Studio profile included, which has 4 of these set up on…
P
Printables
Voyager Wall Mount for Command Strips
I'm way too indecisive with my decor to use a screw-mounted wall bracket for my Voyager model, so I tweaked it to have enough surface area to take a large 3M Command Strip. So far, it's been strong enough to hold it.
P
Printables
Philips Hue Lightstrips Clip
Clip for Philips Hue LED Lightstrips with hole for countersunk screw.
P
Printables
Picture Frame Holder for 2 Tesa Power Strips
You will need 2x Tesa Power Strips https://www.tesa.com/en/consumer/tesa-powerstrips-large.html
P
Printables
Cable Guide for use with Command Strips
Just a simple cable guide that I designed to help me route a cat6A ethernet cable around a doorway. With this design, you can cut a Large size command strip in half, and stick one half on the wall and the other half on the guide. This…
P
Printables
LED diffuser grid for ws2812b strips display
LED diffuser grid for ws2812b strips (60 leds/meter) display. I would recommend to print it 0.2 layer height, print the 3 first layers with white PLA then change filament to black. Pictures are from 4 8x8 grid glued together for a 256…
P
Printables
Custom runners for LED RGB Strips
My motherboard support addressable LEDs but Asus want a kidney and my first born for a small strip, you can just use standard ws2812. I bought a meter out of Amazon and I wanted a nice way to mount them in my Fractal case without…
P
Printables
Wall shoe rack / holder for Command Strips
Thanks for the original model goes to @SickSadWorld_260233 This printed well for me in PETG at .20mm and 25% infill.
P
Printables
Mounting Bracket for LED Strips
Mounting Bracket for a rather affordable LED Strip by Huemihui I didn't want to spend 37€ on proper light in the shadowy prusa enclosure, so I opted for nice generic diffuse LED stripes. The LED stripes are clicked into the mounting…
P
Printables
Caliper-Claw brand caliper wall mount for VHB or command strips
i used pla. obviously no supports
P
Printables
Cable Clip for Tesa PowerStrips Small
This is a cable clip inspired by https://www.prusaprinters.org/prints/109563-cable-clip-2022 but for TesaPowerStrips Small. I also changed the widths of the entire clip throughout to 2mm to optimize the print process and have consecutive…
P
Printables
Presentation box for sandpaper strips (Parametric)
Present strips of sandpaper of different grits in a compact fashion. Can be used either horizontal or vertical. For use with https://www.printables.com/model/22236-customized-sanding-sticks-with-labels or…
P
Printables
Funko Pop Regal für "tesa Powerstrips"
Ein Regal für verpackte Funko Pop-Figuren. Die Rückseite wurde bearbeitet, um so "tesa Powerstrips" anzubringen.
P
Printables
Wall hook for tesa power strips mini
Basically anything should work, I printed it in PLA. No supports needed. 0.2 mm layer height for me.
P
Printables
Clips for hanging LED light strips
These clips fit a Samsung Q70 LED TV, for the purpose of hanging some Energizer LED light strips. For installation, use a bit of 1mm thick adhesive tape (I used 3M VHB tape) stuck to the bottom of the tab, then insert the tab into the…
P
Printables
Power Strips wall bracket or stand
Do you know “Flying” power strips because the cords are too short or clutter on the floor. With this easy to print wall bracket / stand bracket you have a better "home" for a power strip. Fix it with two or four screws on the wall or…
P
Printables
MST RMX 2.5 LED Strips Mount
Please use the mirror feature of your slicer to create the second part.
P
Printables
Optimized mount for the CineLog35 V2 frame, designed to securely hold ELRS and VTX antennas along with Diatone LED strips
This mount is designed specifically for Cinewhoop drones, tailored to fit the Cinelog35 V2 frame. It provides a secure and elegant solution for attaching both an analog VTX antenna and an ELRS antenna while maintaining a clean,…
P
Printables
Bathroom mirror light with IKEA Vattensten 1m LED strips
Model: LED strip mounts for a bathroom mirror cabinet with a box to store remaining cables and the light switches. Depending on your cabinet/use case some adaption of the .stp files will be necessary. The led strips give a nice lighting,…
P
Printables
Fraction Strips/tiles for Maths education
There are AMS and non AMS .3mf files. Best opened in Bambustudio or Orcaslicer. For the non AMS/MMS Version you have to add a pause at layer 11 (2,2mm) to swap filaments. Boxes are stackable so you only need one cover per stack, not per…
P
Printables
Wall / Door hook / hanger (Power Strips normal size)
Printed in PETG 0,35 (fast), 4 perimeters anf 50% infill.
P
Printables
WAN Cork Board Hangers for Command Strips
This was made for the WAN Cork board. You can find it here: https://www.lttstore.com/products/wan-cork-board I printed 2, stuck the hook side of the strip to the hangers, slid the hangers into the back of the Cork Board, then peeled the…
P
Printables
Breath Right Nasal Strips Storage Case
This is a storage case designed specifically for Breathe Right nasal strips. The case allows you to store individual strips vertically, making them easily accessible when needed at bedtime. Features: Vertical storage design for easy…
P
Printables
Dyson v6/v7 Wall Mount Dock Command Strips Plate
M4kerM4n's Design (https://www.thingiverse.com/thing:4150762) is well designed (55mm square), and I just made an optimization for the large command picture hanger strips which are 75mm long. I made the plates rectangular with non-rounded…
P
Printables
NeoPixel Mood Lamp - Perfect for RGB LED Strips
Description: "This sleek and modern LED mood lamp design is perfect for creating your own ambient lighting solution. Specially designed to accommodate WS2812B LED strips, this lamp can be controlled via Arduino or ESP32 microcontrollers…
P
Printables
Mounting clip for waterproof LED strips
A simple clip/bracket for mounting waterproof IP65 silicone encased LED strips (10mm width) when you can't use the glue underneath the strip. They also work well for securing cables. I had them SLS printed but printed on an FFF printer in…
P
Printables
Hangups for Oculus Quest 2 Headset and Controllers - Compatible with Command Strips
Recommended Printing Parameters Material: PLA or PETG Layer Height: 0.20 mm Quality Infill: 15% Supports: None Brim: None
P
Printables
Christmas tree decoration for LED strips
Christmas tree decoration for LED strips. Looks best when printed with infill=100%.
P
Printables
Dyson motor head holder (Tesa powerstrips, no screws)
A wall holder for Dyson gen5detect motor heads that can be mounted on walls using 6cm Tesa powerstrips. The strips I'm using should support up to 2kg, which is more than enough even for the heavy motor head.
P
Printables
LED mounting strips
The model is 20 cm long so that the LED strips can be cut to size. It has a countersunk hole for an M3 screw. The holder also has a hole that is perfect for threaded inserts, such as those from Ruthex. The LED brackets can also simply be…
P
Printables
The Modular LED Light Profile, MLLP 11 for LED light strips
I'm glad to announce that the basic system of my Modular LED Light Profile MLLP is now available! Note: If you like the Modular LED Light Profile please follow me on my accounts. I will continue to develop this system and you can be sure…
P
Printables
Internal Pipe Sander for Sandpaper Strips
Internal Pipe Sander for Sandpaper Strips I needed to clean the inside of a part for my MGB restoration so instead of purchasing the tool, I of course designed it and printed one out. It's pretty simple, but works well. Uses two strips of…
P
Printables
Wall Mount - Command Strips & Screws
Wall hangers mounting methods: Medium command stips Large command strips Screws Files are labeled “wall” or “object” based on what you attach it to. 6.6 mm combined thickness of object and wall files: (doesn't account for command strip…
P
Printables
Yi/Kami Camera Keyhole Mount (command strips)
Remix of this great Yi/Kami camera mount to work with more cables and rotate in 4 directions. Faceplate is "keyhole" shaped with a cutout at the bottom to allow bigger microusb cables to work with the camera. Even backwards ones! I've…
P
Printables
URBI splited for V0 print size with closed led strips wire channels with ecas fitting
remix of the previous version closed off the cable channel more and added an ECAS option + tried making it editable again for the connecting hexagon refer to the original
P
Printables
Fast connector for WS2812 led strips without soldering
Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…
P
Printables
Distance strips - when its too narrow for caliper
Sometimes a space is too narrow to measure its distance with certainty using calipers. This distance strips are super easy way to fix that; Description: Top - end with a hole Bottom - end with variable thickness; Designations: No ident -…
P
Printables
The Modular LED Light Profile, MLLP 19 for LED light strips
I'm glad to announce that the basic system of my Modular LED Light Profile system, MLLP 19, is now also available! Note: If you like the Modular LED Light Profile please follow me on my accounts. I will continue to develop this system and…
P
Printables
Sellotape Hook w/ 3M Command strips
We needed a place to store our masking tape that we use for labeling leftovers in our kitchen, so I created this little hook to hang it from the side of our fridge. It's designed to be used with 3M Command Adhesive Strips, the “small”…
P
Printables
Spare steel sheet holder wall mount for adhesive strips
Description This is a remix of G.wrks Spare steel sheet holder wall mount (thanks a lot!). It removes the screw holes for mounting with adhesive strips. It also adds wedges at the back that make the strip ends accessible after mounting. I…
P
Printables
Sticky strips insect trap forked stake
Forked stake shape. Helped me place sticky strips in small planters. Comes in handy when placing plant labels as well.
P
Printables
LED-Strip soldering tool for 8, 10, 12 and 14 mm wide LED strips
Sometimes it's necessary to solder wires directly to LED stripes instead of using connector plugs. I'm using this tools especially to make connections if I use the LED stripes in wet or damp environments to prevent the contacts from…
P
Printables
small tesa powerstrips hook
Use tesa powerstrips small to stick it to he wall: https://www.tesa.com/en/consumer/tesa-powerstrips-small.html I printed it in PETG with supports and 0.2 mm layer height.
P
Printables
Magsafe / Magnetic Ring Wall Mount (Command Strips)
Print this, attach it using Command Strips, and simply add a MagSafe compatible puck and you're good to go. Mount your phone, gaming devices, and more. Anything with a MagSafe compatible ring. MagSafe puck used: Zanendy Brand…
P
Printables
Clip-On LED Light Diffuser for Philips Hue Lightstrips
LED Light Diffuser for Philips Hue Lightstrips This is a clip-on LED light diffuser designed for Philips Hue light strips. It provides a smooth, soft lighting effect while being easy to install Features: Easy to Install – Clips directly…
P
Printables
USB cable organizer (screw mount or use command strips) - Muliple Sizes
These are USB cable organizers designed to be wall mounted, either using #8 screws, 3M Command Strips or double sided tape. The 6 place cable holder has 4 places for thicker cables (5mm openings) and 2 for smaller ones (4mm openings). The…
P
Printables
Refrigerator Door Handle - designed to be mounted with 3M Command Strips (No Supports)
This is a basic handle with small detents that are sized to accommodate 3M Command Strips (Small/Poster Size). I made two variations with the only difference being the direction the removal tabs from the Command Strips will be exposed. In…
P
Printables
Honeycomb Wall Command Strips Mount - Large
I like the ability to have the Mount behind the Honeycomb Storage Wall like RedLeg and matthew reed have however those 2 models don't hold the honeycomb grid against the wall. I like that gminnick's design comes with the bolt on method…
P
Printables
Milwaukee Packout Label Strips
Overview These label strips provide a place to attach a standard 12mm label (e.g. Brother label maker) to take your Packout organization game to the next level. Features Readable when the lid is open or closed Don't get in the road -…
P
Printables
RPArchive Magnetic Tile Jig for Nickle Strips
I made a couple of STLs for making the RPArchive 3 inch X 3inch magnetic floor tiles using the green US/NA foam (spongy/springy). These are made for use with .15mmX8mm nickle strips First use the jig and lightly score around the center…
P
Printables
Surface Laptop Studio Rubber Strips
Replacement for the Surface Laptop Studio (1) Rubber Strips. I printed them with TPU 85 and like the result so far.
P
Printables
Surrounding Strips Replacement for the Surface Laptop Studio
Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).
P
Printables
iPad Wall Mount for Command Strips
This wall mount was designed around three main criteria: Completely hide a large 3M strip Allow the user to use the camera and home button even with a case that accommodates the apple pencil Allow the print to be made without supports I…
P
Printables
Simple Dampeners for 3M Command Strips or No 6 Screws (3.5 MM) TPU or Flexible Filament
Print with 0% Infill, two perimeters (top and bottom too) and your favourite TPU. Good for dampening hard surfaces. I find the small size command strips are cheapest and fine for this purpose. Has extra No. 6 Imperial Screws, but will…
P
Printables
Intake Breathing Strips Travel Case
V2 Has been uploaded! After using this case on some recent travel, I decided to add a dip for grabbing the application magnet post and the strip as well. V1 will still remain, because people need choices. The travel case that Intake sells…
P
Printables
Universal Tablet Wall Mount (Command Strips)
This is a wall mount for tablets that should work with almost any tablet, and is wide enough that you can leave the case on. It uses 2x large command strips. Print one “with-arm” and one “no-arm” file. The arm keeps the tablet from…
P
Printables
Power Rangers Ranger Key Holder - Single + Strips
My partner has a ton of Ranger Keys from the Power Rangers franchise, and tasked me with building a holder for them so that they don't fall over in a light breeze or speaking in more than a gentle whisper without using adhesive. The plan…
P
Printables
Modular Support for Grow Lights Led Light bars (Tube or LED Strips)
This support was designed to hold and hang grow lights such as tubes or LED strips (approx. 2.5 × 7.5 cm, 120 cm long) underneath shelves or similar structures. The design is split into 3 pieces so it can be printed on printers with a…