162 modeli
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This 3D model is a practical and space-saving screw-on support designed to hold a roll of transparent film (cling wrap) on your kitchen door. It’s perfect for keeping your film within easy reach while cooking or food prepping. The support…
Wydruk około 5,43 €–6,63 € nettoWstępna wycena jednego wariantu
This is my design of a box with a lid with intentionally thick walls to be printed with transparent or translucent filament. The walls are 4mm thick, which makes the box very robust, but more importantly, it will look great if you print…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
Small round box in spiral vase mode to test transparency with 0,8mm revo nozzle. Used Extrudr PETG Transparent 0,55mm Layer.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a shell for a common Chinese spot welder (search for “spot welder 99 gears” on your Chinese marketplace of choice). I did this to try out the “glass” printing technique with clear filaments - it works, but it also takes a very…
Wydruk około 2,94 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction Many designs like RC cars and trucks, lanterns, model houses, etc. would benefit if 3D printing could be used to create truly transparent window panes. But as you might know, FDM printing transparent filament per se does not…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tool helps you find optimal parameters for printing glasslike objects. You can combine the knobs into a wall decoration using honeycomb wall system. My idea was to start with basic prusament PETG 0.2 parameters with 100% aligned…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple color swatch with a place for a label at the top. The squares below show thicknesses and transparency. The size is 75mm by 30mm and is 1.5mm thick. It prints quickly in under 12 minutes. Each square below varies in layer…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
TOP with transparent windows RGB LED, suitable for all colors, print in one piece. only 4 tool changes
Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small square box to test 0,8mm revo nozzle and tranparency of model. Printed with Extrudr PETG Transparent and 0.55 layer.
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Transparent filament temperature test that changes temperatures for each cube that is printed with the best setting possible. Settings are the same as from this guy . Used filament: Nebula Filament PETG Clear (Natural)
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As you may already know due to the covid_19 medical supplies are running out quickly and people who are at the front lines are struggling to keep themselves safe. To try and help I have designed a quick and easy design of a face shield…
Wydruk około 0,85 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What is inside the doorlock mechanism we use everyday? Principle of this ingenious mechanism is presented in the half-cut enlarged doorlock model with simple pin mechanism. If you lost your key you can always print another! Spring-loaded…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Preparing the print Open the 3mf file as PrusaSlicer project (settings for Prusa XL will be loaded). If you a have a different machine than Prusa XL , to get more transparency you need to apply to your machine the settings I used from…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A HEX shape with a variable height transparent tube for storing items. It has a reinforced base with a easy to open top, that stays securely in place. Optional: Can connect to make them easier to carry. Modified Connector is more tolerant…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is not really transparent, but is reasonably translucent. It fits large Nescafe coffee jars, allowing their use as a terrarium. Printed with Geetech transparent PLA. It takes around 3 hours. Many thanks to Steve DeGroof's lid design.…
Wydruk około 1,96 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is a magnetic cup holder. Recommend include magnet and use a transparent filament. Max 16 neodymium magnet(Φ6 x height 3mm, sales in the DAISO). If include magnet, stop printing while finish 3.2mm height(before 3.4mm height at…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The LTTT is a fast and easy to print tool for designers and makers. It allows you to test how much light passes through a given height of plastic, from 0.1mm to 1mm. This can be helpful for evaluating the transparency of different colors…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Transparent AC/DC Logo with holes for 3mm and 5mm LEDs.
Wydruk około 2,80 €–3,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the design by @Jiri_G_45777 of a LEGO style Lantern for the LED lamp kit 001 with transparent paper. I used the following print settings: PLA 10% infill, gyroid 2 perimeters Organic support everywhere (use colour tool…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
My racing simulator rig uses a Fanatec racing wheel and a metal dashboard for additional buttons. The dash metal plate unfortunately covered the backlit power button on the racing wheel, so I drilled out the dash so I could push the…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
This is a small remix of the original Transparent Nextruder Cover for Prusa CORE One and MK4S , modified specifically to fit the CORE One+ configuration. The CORE One+ Nextruder assembly uses a protruding M3x25 socket set screw , which…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple holder for hygrometer, remix of model by Printosaurus. Designed to be glued from inside on transparent lid of plastic box (I keep my fillaments in such box), you can slide hygrometer from side easily to replace it, change…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
Transparent
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
A Transparent Color Combi Tester that combines 6 layers in one model as follows: 6 base color layers & 0 test color layers; 5 base color layers & 1 test color layers; … 0 base color layers & 6 test color layers. The idea is to stack the…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print your own transparent PETG or PCTG parts and dial in your parameter using this small model. Print time ~1h. My baseline settings 0.4 mm nozzle 230 °C nozzle 80 °C bed 0.12 mm layers 1 perimeter 0 top/bottom layers 100% aligned…
This is a simple dice with a skull-shaped void inside it. In order to see the skull you need to use a transparent print process. Theoretically SLA should work (but lacking an SLA printer I haven't tried). For FFF Colorfabb HT will work,…
The study of light is one of the things that most fascinates me associated with 3D printing. I created this profile for all those who want to try to have transparent prints as possible to study the properties of light. In the following…
As in topic. Print instructions 0.2 layer (important) on small nozzles lettering will appear set max no. of layers looking good with 3 walls and hilbert curve on top leyers
To print parts which looks like glass, I have checked different print settings for PETG. Overview Settings: Results: No printed part, indipendent of the settings, looks like glass without grinding and polishing. The most promising result…
Sorry some of the photos aren't great. Camera's don't like transparent plastic. This stand is an improved version of the dummy 13 stand by Soozafone. I didn't like how little weight it could hold, so I fixed it. This file may not work the…
outer part shall be printed on vase mode with no bottom layers. Hardware needed is a E14 lampholder which must be of the threaded type, something like this:
Oahu, HI (Oahu) Topographic Map with Hydrographic Features Oahu, HI dual color topographic map with a separate outline made for glow filament! Part of USA of Plastic collection. Show off the outline of Oahu with glow in the dark filament…
Fruit Fly Trap / Fruchtfliegenfalle English The 3D-printed fruit fly trap is an effective and user-friendly solution to get rid of pesky fruit flies. It consists of three main parts: the canister, the trap, and the lid. These parts are…
Simple and quick print to test the transparency of a filament. Range from 0.2 to 1.0mm. Best printed with 0.2mm layer height.
Transparent whistle with ball and hole The whistle contains a hole for passing the cord, a groove for attachment in the mouth and is complemented by a ball that causes a change in frequency. Whistle made of transparent material. We can…
To cut a long story short: tol-protractor-drawing-assembled-height-04.stl is most likely what you need. The rest is written for advanced users. This model is for drawing. There is also The SMALLEST Protractor for CAD modelling . I found…
I reccomend some PETG Due to the ease of transparency I recommend using a translucent PETG to allow light to pass through more easily. I used red transluycent Polymaker PETG. Watch the video 💚 here the video of the realization ( french…
Follow video tutorial for printing transparent objects
This is just simple cylinder to be printed with transparent fillament and can be used instead of pet bottle for Karak dice tower. It took me 4 tries before getting good result. It might be even better but i like it how it looks with the…
Vægholder til Homey Pro + Bridge. 2023. Den er printet i PETG og i gennemsigtig så man kan se lyset.
This is a modified version of RC2 of the Prusa Protective Face Shield that you can use with 8.5"x11" Transparency Film available at any office supply store. Buy it in packs of 100 and drill the holes with a 3/16" bit using the template…
The “SteamCooler” is here to save the day (or temps) In combination with the JSAUX transparent back shell and a non destructive thermal mod this cooler actually delivers cooling performance unlike those magnetic attached phone cooler who…
After trying out keycaps from falcon14141 model, I decided to improve the insert stem and add a few other designs. SVGs are from svgrepo. Printable at 0.2 layer height. Inserts should be press fit on the switch
Vacuum formed and 3D printed transparent face mask with replaceable filters and an excellent seal. I've made and donated over 1000 opaque 3D printed masks that have been fit-tested and and particle tested with great results. Using the…
0.3MM Layer Height (Or Higher Quality), 15% Infill, No-Brim (Or Raft). PLA, ABS or PETG (Transparent Filaments Recommended)
Low poly version of my Oahu, HI topographic map with a separate outline made for glow filament! Part of USA of Plastic collection. Oahu-HI-dual-low-poly-005.3mf file has 5x the detail of the Oahu-HI-dual-low-poly-001.3mf file. See linked…
A small hook for Invisalign-like aligners to help you take it out of your teeth. Especially useful if you have short nails :) Category: Bathroom
Jeder, der die praktischen, transparenten Euroboxen aus dem Baumarkt nutzt, kennt die offenen Griffe an den Seiten. Diese sind eine Schwachstelle, wenn man den Inhalt vor Staub in der Werkstatt, Insekten im Keller oder beim Campen…
Basic transparency swatched designed to use less than 30g of filament, also contains a hole for attaching it to a ring and a clear area for labelling. Measurements are in metric (0.2mm to 2mm) and are raised enough that you can color the…
Simple models for testing transparency of filament. Numbers on sliced models represent values of perimeters for standard settings (0,4mm nozzle, 0,2mm layer height), first number is perimeters, second is layers (8x1 = 8 perimeters, 1…
I think the Bambu examples are great, but I would also like to know how transparent the filament is/can be. That's why I recreated the Bambu Swatch and installed three transparent controls. With - 0.2 mm - 0.4 mm - 1.0 mm - 2.0 mm…
Hey there, I recently bought an organizer L-BOXX 102 Transparent and wanted to Gridfinity it. Looking up and trying a few models I found soon led me to build my own. This version is a 9x7 grid, fits snugly to the box with just a bit of…
These models can be used to make modified versions, or addons for the existing shrouds.
Yet another easy printable and usable Goggles. [Optimised for 3D Print on Transparent Film]. Goggles weight 29gram (Stripe inclusive). Speed Build Video https://youtu.be/TRsTjk00IgQ Don't forget to subscribe my Channel.…
This is a powder baffle for the new lee powder dispensers with the transparent hopper. The baffle fits in to the red hopper cap and is held in by a screw in locking collar. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No…
I designed a transparent storage program to store small items. Because its operation is very easy to see. These boxes can be stacked on top of each other. I cut transparent PET 1.5 liter water bottles, which can be found everywhere, and…
Modified LCD cover/mount and rotary knob based on the Original Prusa i3 MK3 versions, which are licensed under GPL v3. LCD cover has a smooth front front face with a thin LCD window which will allow the display to be read if printed with…
Introducing the Filament Transparency Tester, a versatile tool for assessing filament opacity. This tester includes slots for testing various filament thicknesses, including 0.2mm, 0.4mm, 0.6mm, and 0.8mm. Additionally, there are slots…
I like a lot original model by @ordnerino - however, I don't have transparent tube, so I just made hopper a bit longer.
This is a new version from scratch I made for the nodeMCU v3, that is bigger than the v2. In this version, I tried to put everything I needed in the same case, even a 4 pin connector, so you won't need and additional case to hold all the…
A LED Top Hoot for the Firerplace in DaD the encounter can be found here https://www.thingiverse.com/thing:2489760 look on my Designs to get better looking Bases for this encounter feel free to get your own styled FDM printable fire LED…
Cozy looking bird feeder with semi-transparent back wall and windows. Link to the onshape file:…
Work in progress. Here's my post on reddit that describes the process a little: https://www.reddit.com/r/3Dprinting/comments/10tgzkf/pla_glass_and_enamel_pin_style_by_putting_prints/ That's the test version of an assortment box for a PLA…
Color Cards are material samples which are designed for professional use. They have a 0.1mm thickness gauge so that the transparency of materials can be optimally exploited. Currently over 100 different colours, 3 different manufacturers…
HUD like clock that acquires current time via WiFi. Four common 8x8 dot matrix display unit (MAX7219 driver) are used. The display unit is tilted backward for directly invisible. How to Make You need Four connecting 8x8 dot matrix display…
Improvement 08.2023: Addition of a filament guide for PTFE tube A simple and pretty box for 3d printer. I simply modeled the angles in cube form with metric inserts on 3 faces (the blue cubes). The hinges of the doors as well as the…
This remix is the first model I've ever posted as a fairly new-to-the-game 3D printing+ dude: <1 year since I started this as both an educational tool and then a hobby (obsession). Please forgive me for any newbish screwups. This remix of…
Box is held with the long side against the multiboard and retaining tabs are added to provide positive lock when container is pushed in.
Please read all the steps: using transparent PETG, print the model on a smooth plate ( I used https://www.aliexpress.com/item/1005007385189249.html or https://www.aliexpress.com/item/1005008566969906.html 100℃. For other plates, change…
Rear fan duct K1C with transparent Fan Windows
Template for the tailors to sew the face masks with transparent sheet. Inspired by: https://www.un.org/pt/node/73626 and MakeItHeard shield project. This project was done in cooperation with Mbolo Association. The mask has not been…
Created video showing how to use Cura “Change Filament” script to print part using transparent and solid PLA… Remix of V1E/Ryan's Kobalt Vac mount, plus these mods : Closed hole for LED, added 2 thin areas close to LEDs to help maximize…
Tested on my DDR5 setup with 4 RAM Sticks and the RAM temperature was reduced by 6-8 degrees C. Includes two models, one is combined, and the other offers capability to separately print the cover (in case you want to print the cover with…
(Yet another) remix of a filament transparency test card. 0.2mm - 1.8mm Must be printed at 0.2mm layer height for all layers. Highly recommended to set infill to 100% and “Rectilinear” Included is a modifier mesh for just the “test zone”…
The OC cooler in combination with a non destructive Thermal Mod + JSAUX backplate will keep the temps on your overclocked Steam Deck under control giving you enough headroom to not worry about stressing your device with to much heat on…
Transparency & Opacity Layer Height Test. This model is used to test the transparency of layers by light. The test stripes are divided into 0.2mm (one layer), 0.4mm, 0.6mm, 0.8mm, and 1mm high. I recommend printing this Model on a 0.4mm…
This is the Transparency Test to test the transparency of your filament. I used this when creating a screen for my Hestiapi Thermostat out of filament that was too bright during the night. This was designed to be small enough to save on…
When are cup walls thicker, then it is little bit challenging to design HEXa / HoneyComb structure in adequate proportion. It can be little bit tricky to print it, but it is possible ("Z hop" should be necessary). Easiest to print version…
A transparent alternative to the stock NeXtruder cover for the Prusa Core One (+) and MK4S. This version includes a 4-sided snap‑fit recess for a thin clear plastic window insert, along with a printable template for cutting the window…
This is a 3MF remix of the transparent test model originally created by CNC Kitchen. The included 3MF files are configured for transparent PLA printing, with cooling disabled to improve light transmission and reduce internal haze. I…
I had some magnets showing through on one of my designs, so I made this to test how many layers I needed to keep things from showing through. Each level is one layer, and you can quickly count how many you need. This is designed for .2 mm…
Like everything, this cover blocks out the light at night when you sleep in the same room. The difference is that usually such light blockers are a blank cover. My version allows you to observe the information on the display without…
Cura Setting for Glass like transparent PLA. The principle for transparent PLA is: Quickly printing the tangent lines and letting them cool slowly without fan. also viods are removed by low layer height and 102% flow. And drying with…
Transparency hollow clock is a unique and visually appealing timepiece that features a see-through design, allowing you to observe the intricate inner mechanisms of the clock while it keeps time. Its transparent nature adds a touch of…
I designed this butterfly coaster to use with transparent filaments. There are four (4) layers of colors, allowing you to mix your own combination of colors using transparent filaments. You can personalize it by added recessed text into…
The first design is simply a hole through the face of the lid. The second one as a thin layer printed where the Hole is situated in the second design. Paired with a Transparent Filament makes a actual window. The third one is the same as…
a small handle for the transparent grid of brother embroidery hoop
Simple test for transparency 1 layer 0.2mm to 8 layers 1.6mm There are numbers to find which one is which, and remember to change settings of the slicer and increase solid layers to avoid infill.
Translucent LED Lamp Shade – Crystal Effect | Compatible with Bambu Lab LED Lamp Kit 0.2 mm layer height - variable layer height recommended (use smooth) Translucent PETG 2 walls 15% infill On .3mf file fuzzy skin applied only to main…
I started working with ESP8266 chips a few weeks ago and needed some sort of case to place them in a proper way. But I wanted something nice that I could be proud to show, so I decided to design a transparent case with four metal screws…
Parol (Transparent Star)
Dual print with transparent interior so that the button lights up nicely. Nozzle 0.4 Layer 0.2
A filament palette to keep track of your filament colors, with transparency viewer, ranging from 0.2mm to 2mm Reccomended print settings: - Nozzle diameter: 0.4 - Layer height: 0.2mm - Print orientation: as imported - One wall for top…
(inspire from Rygar1432 ) parameter recommend machine: voron v0 nozzle: 0.8mm speed: 10 mm/s (all situations) travel: 30 mm/s layer height: 0.1 mm perimeters: 2 or infinite horizontal shells: 0 both top and bottom infill: 100%, Aligned…
I absolutely love Venegade's Yet Another Filament Sample - Keycard Edition , but I didn't need the overhang/hole information that that version created, which slows the print down. Instead, I really just needed a big space to add the…
I think the Prusa Mk3 filament sensor is a great idea. However, some filament types are difficult for the sensor to detect. There have been various efforts to develop indirect sensors that rely on sensing a proxy (usually a bearing) that…
Compatible with Cooler Master's MasterLiquid 240 Atmos & MasterLiquid 360 Atmos . covers with different thicknesses for light effects with the cooling system LEDs filament polar white filament orange neon trasparent
![Flexible Goggles Optimised for 3DP [Print on Transparent Film Challenge] 7-size Covid-19](https://media.printables.com/media/prints/59044/images/618162_43d53e5e-8773-42fa-9a4f-07a80dfc051c/large_display_img_5666_59044.jpg)
