Liczymy pasujące modele…
This is a funny whistle which combines the principle of a turbine with a air raid siren. this model has almost no sense but to be fun :) it gets better over time due to the grinding of the seams on the barrel a bit of silicone spray in…
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Wind Turbine inspired by the Liam F1, using fibonacci sequence for the blades. Leaves in a fibonacci pattern in plants maximise the area for photosynthesis and minimise the amount of blocking overlap. The same prinicpal can be applied to…
Easy to print yet very well working pinwheel, looking more like wind turbine. It uses common bearings easy to find in DIY stores or in sport equipment stores (they are used in roller skates). All parts fit into 18x18x18cm volume printer,…
This is probably just about the smallest triaxial tourbillon mechanism that one can reasonably make with a .4mm nozzle. It's powered by a sping motor at the bottom an fits within a 96mm sphere. The only non-plastic parts are a couple of…
Here's my 'Mk2' Vertical Axis Wind Turbine (VAWT). I've always liked the lines of these, but they really caught my attention a few weeks ago when I realised that I couldn't explain how they work. I'm now a lot less confused about how a…
OTHER CREATIONS: GEARSHIFT KEYCHAIN V2 - [ FREE DOWNLOAD ] PATREON : [ Follow me on patreon for free access to our 3d models library and exclusive content!! ]
The only thing that is important for this model is enabling elefant foot compensation so that the print will turn out very precise otherwise the whistle wont make a sound.
Its an Turbine blower remix to fit an 775 motor. The original is from JolietDelta. I improved the design to fit an 775 motor. Also the turbine is a lot bigger than the original, the parts fit on an 200x200x100mm (LxBxH) bed. You can…
Wind turbine model in cross-section with gearbox and generator and rotating blades I have always been fascinated by wind turbines, their majesty and size as well as their function. Therefore, I prepared a model that would show the…
This is a spring-driven, one minute tourbillon designed to amuse and annoy in equal measure. Print instructions This is a simple model of a Swiss lever flying tourbillon as found in many high-end watches. Vocabulary lesson: Tourbillion -…
This model of the 4th generation of Solaris Urbino bus comes with spinning wheels, working doors on the right side, a detailed interior based on the seating layout of a real bus, and can be printed entirely in one go with no supports…
Thanks to Lukass for the great wind turbine. The wind turbine turns very well. An (Brass) axle 4x190 mm, 4x ~ 80 mm and a screw M3x6 are required. Drill out the bearing blocks with 4.2 mm. Drill out the cross hole of the conical disk with…
A small wind turbine made from ApolloX material, perfect for outdoor use in your DIY weather station. This model uses a bearing to easily turn. (A 608 bearing) Used materials: FormFutura ApolloX If you want to see more follow us on **…
V0 Upper-Rear Bowden Inlet (URBI) A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor. There are 6 Variants: URBI - The basic, just a hole to pass the bowden tube through. URBI-PC4 - with a…
A symmetric wind turbine inspired by the Archimedes Wind Turbine Remix by Stuart800. I used three EZO 685 ZZ bearings (outside diameter: 11 mm, bore diameter: 5 mm, width: 5 mm; metal protection on both sides), and I used just a spot of…
11/17/23 Printables does not accept EASM files. so on this Thingiverse page ( https://www.thingiverse.com/thing:3894352/files ) you can find a an EASM file of the whole Furious assembly. With an EASM Viewer, you can rotate the Furious in…
THIS MODEL IS OUTDATED. There is a newer version available: https://makerworld.com/en/models/550884 There is a more recent version that works better this easy to print wind turbine looks great on any fence post or wall, with the easy to…
Solar Wind Turbine This wind turbine is a remix of the great 3D model from Ivailo ( https://www.thingiverse.com/thing:4635423 ). This wind turbine is powered by solar. Motor and solar panel A solar panel has a size of 65 x 48 mm (3 V DC,…
A fast spinning water turbine to be directly screwed into the water tap. It really spins like crazy. My children love it as bathtub toy. The turbine has some power but low mass, which renders it exciting but harmless. Anyways, keep your…
Pelton turbine created with Autodesk Inventor Category: Engineering
Open Source Vacuum Turbine Module (Fully Printable) This is a fully printable, open-source vacuum turbine set designed to be easily incorporated into your own projects. Whether you are building a custom vacuum, a fume extractor, or…
The model is about 8 cm in diameter. It serves no other purpouse than rotating in the wind and looking cool. The design uses a 608 bearing in the center of the turbine. All the parts should be idealy printed without support, especially…
This is my second clockwork design. It took just under a month from starting the design, to posting it. I modeled it after a Cabestan Triple Axis Tourbillon, which they offer in their high-end watches, and spent many hours looking at…
Overview Complete design of Ugrinsky Vertical Wind Turbine Generator. The Ugrinsky Wind Turbine is a vertical-axis wind turbine designed for strong low-speed performance and reliable torque. One of its standout features is its low startup…
his is my model spiral Francis turbine. Turbine has 8 blades. More info about turbine runner is in file: "Turbine runner.txt". Turbine runner modely by Esmir Hozanovic. If here somethik problem, download model here:…
Summary I designed this turbine fan to collect wood flour from my CNC machine. It is driven from A2212 BLDC outrunner motor (1800KV). In addition, an ESC and something that generates the speed request are required. In my case a China-…
Liam F1 wind turbine Turbina de viento Liam F1 Category: Engineering
Turbine Windmill with Rolling Bearings V4 Update 2026/06/14: What could be better than a turbine windmill? Two of them on top of each other, running in opposite direction 😁 (print the two 'double' files for that) V3 Update 2026/06/05:…
I found this Ugrinsky style windmill on thingiverse (Yuck! I know…) but I didnt find the parts supplied that useful apart from the blade design, which is awesome. I made some simple brackets and other printed parts needed to experiment…
A basic wind turbine design that can produce enough electricity to power a small LED light. I manged to print all of the parts on a stock Ender 3 using PLA, so it should print fine on any printer out there. How to print: Material: PLA,…
This is the modern version of my other Jet Turbine Fan Fidget Spinner. I designed this to resemble todays' "Fan" section of a jet turbine engine. Simply blowing on it will spin it. The fan is directional. Due to the curve of the blades,…
Hi! This windwheel works wonderfully and because its fully ball beared the slightest breeze is enough to make the wheels spin fast :) Printing: -Parts are constructed that everything is very easy to print even on old 3D printers and not…
This is a remix of the Wind Turbine Blade by St3rz0. This model makes the insides of the model solid so you can print them in a more structurally sound way. The 5 blade sections slot together with a lock and key mechanism. I print the…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
In Action: https://www.youtube.com/watch?v=Ij9UewAz\_rA The Mechanism: The title of this design (almost long enough to be a Lina Wertmuller film) pretty much says everything one needs to know. It uses an independent wheel (the rotation of…
This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…
All design credit goes to ZekeAsakura https://www.thingiverse.com/thing:2900552 I remixed it as follows: Reduced the diameter to +/- 40mm Trimmed the height to +/- 10mm Recessed a small hole to make it easier to glue in a 8mmx3mm magnet…
This Helical Wind Turbine needs a little more wind to get moving, but then it goes for it! The rotating part is supported on a narrow ring, which keeps friction to a minimum. Print in Place for the rotating part. The base (or wall…
This 3D printed wind turbine design can be part of the cool things for 3D printing. It can be ideal for hobbyists or sustainability enthusiasts who love exploring clean energy technology or want to explain how wind turbines work. Here you…
2/21/21 FYI, To keep more up to date with what I'm doing I started an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here. Triaxial Tourbillon Clock Build Notes: (Download the…
Thanks to vladua for the great wind turbine. I enlarged the wind wheel to a diameter of 170 mm and a height of 196 mm and adapted it to my proven bearing for an 8 mm metal rod. The wind turbine parts can be put together without reworking,…
A small vertical-axis wind turbine (VAWT) which fits on the top of a pencil. It's not very efficient, but it does work! Good as a physics demonstration, or for just looking nice in front of a desk fan. The fit of the center hole is close…
Ich bin zwar kein Fussballfan, aber wenn man schonmal die Vorlage hat... (Danke an Hofei für die Titelbilder) Update: 11.05.2024 Die Files für Konsole und Deckel hinten ausgetauscht, waren nicht 16mm. Sorry Update: 13.08.2024 Ein paar…
Turbine, Lüfterrad oder Propeller konstruiert mit Fusion360. Alle Merkmale können in Fusion360 über das Menü “Ändern > Parameter ändern” angepasst werden.
One of those things you do when you're bored. Just for fun :) Physically definitely not correct, but still makes a lot of air at the exit. Needed parts: - 4x M3 min. 20mm / max. 25mm long - Socket Head Screws - 2x M4 x 8mm - Countersunk…
Model of Kaplan turbine. Bolts: 10x M3x8 10x M3x6 15x M2x6 Print instructions Unassociated tags: kalan turbine, kaplan trubine, kaplan turbine, power plant, water power Category: Engineering
Hi there. I'd like to present my latest project. Turbine hand cranked blower. it uses planetary gear with 1:6 ratio so for every crank turn the blades of turbine performs full six revolutions. It's great for barbecue and just for fan. All…
Just for learning to model Objects ;-) You need: 3 x M3 Squarenuts 3 x M3 Screws 2 x Ballbearings 1 x Motor/Generator Update 22.05.2018: added a Baseplate with mount for a pipe Print instructions Category: Buildings & Structures Print…
This is a scale version of a wind turbine approximately around 1:100 The rotor is connected to the nacelle with a 608 bearing Print all parts once except for blade print this 3 times. Everything should just press together, although…
Thanks to rosch8 for the really great original wind turbine. After the original wind turbine had been running without any problems for some time, I wanted to make it bigger. Increased the hub, rotor blade and spinner to 150% and changed…
Note: to make it function as it does in the video requires careful filing and adjustment of the escapement. i honestly do not recommend making this. (Note added 2026) (Original Thingiverse link: https://www.thingiverse.com/thing:4226922)…
Kit card of a wind turbine. Parts fit printed on my Ender 3 with a “Horizontal Expansion” setting of -0,05mm, Parts should fit without adjustments on a well tuned printer.
Description PDF This is the third version of my vertical axis wind turbine. (V.A.W.T.) This third version is completely inspired and modified by the Aeolus project. In the future I will publish other changes after carrying out the first…
Demostration video: Thin Cone Version here: https://www.thingiverse.com/thing:2751069 Demo: https://youtu.be/LDD02Nnn2Ng Rubber seal is needed thread: 24mm Added Inside Version Added clockwise direction ¿Looking for similar designs? Look…
This is a small, functional radial turbine which uses a 1408 brushless motor. The 3 piece assembly is really easy, just make sure you print case with support. The .3mf file includes already the right settings and paint on supports. Make…
🌬 Wind Turbine Garden Decoration – Elegant, Silent, and Functional 🌬 Add a touch of motion and minimalism to your garden with this beautifully designed 3D-printed wind turbine . Built without gears, motors, or wiring, this model is purely…
Thanks to cooasty for the beautiful pinwheel. The two propellers are counter-rotating and have a nice "hypnotic" effect due to their shape. After cooasty's windmill had survived a few years and storms, I wanted to build the windmill…
Introduction This model of a wind turbine is fully functional and turns even when there is little wind, as can be seen in the following video. The model has a modular design and consists of three assemblies: the rotor, the housing and the…
Solaris Urbino IV 10 UPDATE aug'20 | 3D Warehouse (sketchup.com) - odsud staženo
I wanted a decorative VAWT for the garden that will spin in the wind! I like this model , but removed the center part as it is not needed for decorative use. Will easily spin on a small metal or wooden stake (e.g., tent peg, chopstick). I…
It happened to me that during an expedition a little longer than expected, I tried to recharge my phone and Power Bank when it had run out and there was no sun light at all. There was wind, but I wasn't prepared to take advantage of it.…
Wind turbine holds 2 or 3 skateboard bearings. The 3rd is optional, but it can mildly improve rotational stability. Airfoil is designed with an industry accurate -15 degrees of twist. To be functionally accurate, the turbine should be…
This is a motor visualizer like a turbine. The model consists of three parts: the propeller, the tip and a connecting pin. It mounts interlocking. It has been printed in PETG with nozzle 0.4mm, layer height 0.15mm. The tip should be…
Big thanks and compliments to the original designer! @StoererHauptquartier On my printer the Rotor fused and locked in place. Seems a pretty common issue. This remix opens the clearance by 50%. I printed this on MK4S 0.40 nozzle and 0.10…
I really liked the Windmill - 100% Printable and I also really liked the design of the Windmill Wind Turbine rotor So, I couldn't resist merging these two beautiful designs together Features Reuses original parts from both wind mills…
This is an out of scale model of a wind turbine. It is very fun to print and to assembly. Print instructions: -It was made to be printed with a 0.4mm nozzle with a 0.2mm layer height. - The Blades can be printed on vase mode but you need…
Here is a good use for a stepper motor that would otherwise sit around and collect dust. This is a work in progress and the results so far look promising. I wanted a design that was simple and that didn't require any hardware. No screws…
After 2 long hard years of service I decided my HEVO needed some TLC. Within the refurbishment I Klipperised the HEVO so I also had to revise my Electronics Enclosure design. The wire management of the HEVO is so much easier without a…
Markus' Tornado Business Card Holder got my mind swirling with thoughts of spinning turbine blades. This turbine holds 24 cards and will add a little pizazz to your next trade show booth, especially if you set it up in front of a fan to…
Remix of simple wind turbine from "wilson124". Original model was too massive and printing time was unacceptable for me, so I break it on parts. You will need three vanes and a base. Print the vanes back side down with supports. I made it…
new model mk3 is here: https://www.printables.com/model/675051-small-wind-turbine-mk3-windmill This is upgraded version MK2 of Small wind turbine. But it is just model aprox. 500 mm length, it does not produce any electric or mechanical…
Model of Francis Turbine, diameter 180mm. you need 2 bearing 6000 (10x26x8) and 4 bolts M3x8 DIN 912 Category: Engineering
Through the following link you will get access to my Amazon Store Front, where you will find the shopping list for each project and other product recommendations. https://www.amazon.com/shop/adriancubas As an Amazon Associate, I earn from…
To repair a decorative wind turbine that runs on solar energy, print in 0.2 mm layers and infill 15%. The motor axis has a diameter of 2 mm
After trying several existent fan blades I modeled my own - now THIS thing seriously moves some air! Thin, curved blades, lightweight, 1:1 replacement for the original turbine. Plus a shorter “trigger” handle for one finger operation.
This is a omni directional wind turbine designed to be installed outdoors on the rails of your deck or just stick it in a potted plant. This design will catch wind from all directions and the turbine does not have to face the wind. I have…
Miniature Tesla Turbine. Will work great with real bearing but can be tested with the mock-up bearings provided. Also available here: https://www.thingiverse.com/thing:5176460
This design was modeled it after a Jaeger-LeCoutre Gyrotourbillon, which they offer in several of their high-end watches. I tried to make the model an accurate (scaled up) version of the original mechanism, which is less that 10mm in…
The Honeycomb Windmill - Self adjusting hexagon turbine YT Short Action Beautiful Windmill with a unique honeycomb Propeller Design Self adjusting to wind direction through the Tail Blade 100% printed, no Screws or tools needed You can…
Ugrinsky Wind turbine optimized with a little Helix! It don't need much wind force to spin. Approx Ø190 - Height 168mm - Bore Ø5,6 There are much ways out there to scale it if you want! Very easy printable! Vase mode with 15x 0,2mm bottom…
Holder for the LIAM F1 Wind Turbine www.thingiverse.com/thing:4237639
About Wind turbines are manufactured in a wide range of sizes, with either horizontal or vertical axes, though horizontal is most common. This one is one of the smallest :) What else is there to say about that? for outdoor use, use PET-G,…
Thanks again to rosch8 for the great original wind turbine! I've already done a few remixes, this rotor blade design achieves very impressive speeds. I added a second counter-rotating rotor to my remix. Of all my wind turbines, I like…
A little turbo jet engine for model aicrafts or somthing else Print instructions print everything with brim and with prusament petg print with quality 0,15 and 0,4 nozel and 15% infill no Supports
THIS MODEL IS OUTDATED. There is a newer version available: https://makerworld.com/en/models/550884 The latest version of my wind turbine. After taking feedback from some others who made the V3 I have improved this design in a few major…
I have designed this for a school project of my son (Fip NWA, Fachinterne Prüfung NaturWissenschaftlichesArbeiten). For this to work in OpenSCAD, you need the NACA Airfoils library from Parkinbot: https://www.thingiverse.com/thing:898554…
remix of the Landru dremel turbine , but added a bearing, end exhaust and adapted for this driller model
Thank you airfish for the beautiful counter-rotating illusion wind turbines. I couldn't find the original pinwheel anywhere anymore... I enlarged the wind turbines to 200 mm and added hubs for ball bearings 608ZZ (22x8x7). There are 4…
A Turbine-like lamp with RGB LED lights Video: https://imgur.com/Qd0Y0tP Print instructions Print instructions Fins Roughly four hours per fin 0.3mm layer height 15mm brim Use a matte white filament, I used Prusament Vanilla White PLA 2…
These are wind turbine blades designed to be used with small motors with 2 mm shafts. Specifications Hub Radius: 12.5 mm Shaft Hole Radius: 2.15 mm (should fit 2 mm shafts nicely) Blade Length: 73.95 mm (excluding hub) Blade Width: 23.83…
Hello, here I have a functional wind turbine for you. There are 2 mounting options: *There is a hole at the bottom of the stator, into which a rod with a diameter of 10mm can be inserted. If the rod is slightly larger or smaller, it will…
V2 - Smaller outer blade connecting supports with deeper tilt help with spin. Simple print, No supports, Zero assembly, Unique wind-spinner. Made provisions for Zip ties and or screws for mounting. Model just balances on its spinning…
This compact 3D printed wind turbine is designed as an eye-catching demonstration model that combines motion and light. The blades are powered by a Motor N20 6V (60–100 RPM) – a small but reliable motor that обеспечивает smooth and stable…
Creality k1 max side fan for those who broke their side fan accidentally, No need to buy a new one, printed as shown above, make custome support in the medial section only, don't support the blades... Source design included, use design…
Small scale Pelton turbine designed and used for a school project. It attaches to a generator to generate some current. It is intended as a proof of concept for a fun and introductory science and engineering project. It requires bearings…
Through the following link you will get access to my Amazon Store Front, where you will find the shopping list for each project and other product recommendations. https://www.amazon.com/shop/adriancubas As an Amazon Associate, I earn from…
Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…
