Liczymy pasujące modele…
Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…
Wydruk około 1,26 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 0.8 MOD gear 60T & 65T for the 2.5" & 3" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Matchstick Diffuser A diffuser for the Daylight/Rainbow on a Matchstick LEDs BOM Item Qty. M3 Heatset Insert 4 M3x6 BHCS 4 Printing Print one of each main_body_daylight_A.stl and main_body_daylight_B.stl if you have Daylight on a…
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
The original RC3 headband STL file had manifold errors that caused problems with the Cura slicer engine. This file is repaired and works with Cura (tested with V4.5). Print instructions Same as original, just repaired the mesh
This model is compatible with the lego system.
A remix of the Matchstick Diffusers to fit on to the bed of a Voron V0 (120mm x 120mm). The main body of the diffuser is split into two so they fit on the V0 or similar size bed. For the rest of the BOM, please refer to the original…
Description LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶…
K2 Plus hula storage solution! love having hula feet but hate missing out on the square foot of storage space underneath? this is the answer to your prayers. this shelve includes storage for the tools that came with the K2 plus and…
This diffuser clips on to the front of your Canon MT-24EX flashheads and provides a large, evenly illuminated 175x120mm rectangular front face (~7x5 inches). The shape of the face has been chosen so that the MT-24EX's natural beam pattern…
Diffusers for common enthusiast flashlights. The diffusers can be flat top or Printing Some of the lights can generate a lot of heat, as such you should print the diffusers in a hight temp plastic like PETG. For Flat Top diffusers print…
This is a modified version of the quest 3 elite strap cable clip, intended for pointCTRL users: a second hole is built in the clip so that the USB cord of the pointCTRL HMS finds its way through the clip.
This pack contains a Goblin Druid, a Tiefling Sorceress, a Half-Orc Wizard, and a Kobold Witch! We can always use more interesting classes for both players and npcs.
This model is compatible with the lego system.
if you upgraded to a direct extruder you should know that passing the filament in the filament sensor is a hassle, so I decided to create this model that will help the filament to pass through smoothly 0.2mm PLA If this model helped you,…
A friend of mine needed a sign for his reception toilet, which is for both genders and wheelchair users, so I made this. It is a single toilet for both (all?) genders and is wheelchair friendly. The sign is multicolor, so the stl file can…
You can buy these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize the usage of the light…
Easy to print and stick on. These High speed anti-buffeting wind diffusers for Porsche. Specifically designed for the Cayman, may work with others.
Two diffusers made to fit on the Nikon SB-600 camera flash. One is closed and solid while another has an opening in the top. Mostly round they have a soft effect like a vanity light. Highlights and reflections from the diffusers appear…
You can buy these from me here! Consider giving us a 1 time donation if you like this model! I have uploaded the raw .STL files, and I have also uploaded my .3mf files. The raw .STL files do not have the holes for the light made in them,…
Pattery pack for DJI mini 2
it good with my flashforge 5m and turned out perfectly due to my improvements of this fidget
Elegoo CC1 poops chute and basket for CANVAS users Access from the left of the printer, big poops basket for multicolor printing Need to replace the original screws by 3 M3x8. The problems seen on pictures are allready addressed on the…
(Please Share your Makes) - I made 2 Versions. This is Version 1. You can find V2 here: https://www.printables.com/de/model/358066-hosenbeinclip-ideal-zum-fahrrad-fahren Mit diesen Clips lassen sich weite Hosenbeine zusammenhalten und…
This was designed for use during rehabilitation of a stroke patient who had reduced mobility of the arm and wrist along with pronounced pronation of the forearm. The mug has two adaptations: The mug only needs to be tipped 45 degrees to…
It is shaped to be pleasant fiddled around with
This is a modified cable clip for the Hp Reverb G2 VR headset, specifically designed for PointCTRL users. It's a remix from https://www.thingiverse.com/thing:4723188 and inspired by https://www.thingiverse.com/thing:4886190 . While…
My Olight S2R/ Baton light is used outdoors frequently. While camping, having some "lantern-like" light in your tent can be helpful. I Remixed the excellent "Olight S1R Ultralight Diffuser" by @imbrianj to be sized for my light's slightly…
V-Slot Covers / LED Diffusers / Channel Wiring Concealment Multiple lengths and self-supporting print options No supports required Included STEP file containing all variants for customization Optimized for 0.4mm nozzle Flush with…
I picked up this all-in-one pump/filter/aerator for a 65gal tank I'm setting up: https://www.amazon.com/gp/product/B0C4TYPKH2 It's a convenient unit, but the water flow is definitely on the strong side. I designed this pair of diffusers…
Selection of light diffusers for my Lumintop flashlights. I used Smartfil Green Glow Flex 93A, 0.08mm layer height (you cannot see the layers at all), 100% infill. Diffusers for: Lumintop GT Nano/GT Nano Pro Lumintop EDC Pico/EDC Pimi
Welcome to the world of perfect lighting! This model isn't just a housing, it's an entire modular system designed for 10mm LED strips, allowing you to create unique lighting setups. With a thoughtful design and four different diffusers,…
These are diffusers for a few of my flashlights. They do best with a translucent filament, but you can get away with an opaque filament in a light color, as I did with the yellow one. They should be a snug fit, so they won't fall off on…
Simple cigarette box for RYO users. Holds 18 nicely. You will need 4 2mmx2mm N52 magnets (eBay) for the snap on lid. The hinged lid I used the small paper clip straightened out.
Rayban's cases are famous for being too fragile. This case aims to replace them in a form factor suitable to be carried inside a trouser's pocket. New version intended to be printed fully in TPU
Protractor (or goniometer) which can be used by blind users because of the tactile elements. model is also on Tactiles.eu, a database with 3D models specifically for people with vision impairment.…
This is a first batch of my remix of Extrutim's Kurzgesagt bird fridge magnet models. The difference being that these can not be printed as separate parts and glued together, so multimaterial capabilities are a must. I have made parts…
All Front_Body_Diffuser STLs are printable in dual‑tone with a filament swap (M600).
Connect them how ever you want and get creative and have fun building. screw or double sided tape options long to small options different corner options links together like the wooden train track (picture below) easy to take apart for…
Assists wheelchair users with closing doors, not needing to risk fingers getting smashed in the hinges. Handle snaps into the bracket/hinge (may need to press hard). Can be attached to the door using double-sided mounting tape. I printed…
I like to use otherwise unused LiPo batteries w/ the MT12 radio. Unfortunately the original joystick module won't fit, so… I made this version. Printing The design is not optimized for FDM printers because I wanted to print it in resin…
Print 4 of the Side strips and two of the short top strips. Used JoyLit 10mm 24V LED strips from amazon. J OYLIT 24V LED Strip Lights White 6000-6500K, 16.4ft/5M Flexible 300 Units SMD5050 LEDs, No-Waterproof High Bright LED Tape Lights…
This is a v-slot cover intended to be installed beneath roller wheels and used as a LED light diffuser for SMD 2835 (and similarly sized) LED strips installed into the 2040 extrusions on the z-axis. 24V 2835's are extremely bright and…
This is a posable model of the Technotrousers from the Aardman animations movie Wrong Trousers. You can either glue the legs in a pose, or set up springs that go through the balljoints with some m3 screws to keep the legs movable and…
With this model a blind person can measure or draw the same thing a sighted user can with a triangle protractor because of the tactile elements. you can: measure and draw 90 degree angles measure and draw lines of 1 cm. measure and draw…
This is a diffuser for Pimoroni Scroll Phat HD and Unicorn Hat HD. It comprises two parts: a mesh grid to keep the pixels sharp and a flat front plate for the light to project on to. Print the mesh in black and the front in whatever…
tool for AAC users to learn eye gaze designed by my son in his internship.
You can buy these from me here! Consider giving us a 1 time donation if you like this model! These are very challenging prints due to the use of multiple 3D modelling software involved in the design of these items. I highly recommend…
Flash diffusers for Neweer Z1/Z2 flashes by Trinidad . I take no credit for their hard work and I'm simply re-uploading as I appreciate the model. OP stated it's for the Neweer Z2S flash however, the flash head body remains unchanged…
Perhaps these are the correct trousers for... Chicken Run?
This is a model of the Techno Trousers from Wallace and Gromit that I made with makerworld. This is the makerworld Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This gave a second life to an otherwise perfectly good trousers clamp. For the hook I repurposed the wire of a hopelessly bent cheap clothes hanger. The model comes with the FreeCAD file to easily adapt it to clamps with different geometry.
It's a simple design pants hanger. I strongly advise against printing it in PLA; fill it as you like and use at least 3 wall layers. If it doesn't fit on the print bed, put it diagonally.
The model is perfect, I just added a seal. The TPU seal adds more water resistance. I tested the water resistance of the printed model with 3 perimeters and the added seal for 8 hours submerged in water and the result was 100%. Print TPU…
The mirror was not entirely trivial which lead to fail prints. So now you don't have to suffer like I did. I find it is necessary to add support to the part that holds the phone ( where the power cable would go. It is hit and miss. Some…
Replacement part for hanger clip. 2 version for different generic hangers
Spare Trousers card from Balatro 4 of a kind is 2 pair All credit to LocalThunk and Balatro for the design
Cup stand for motor impaired users of cups based of https://www.thingiverse.com/thing:3022034 Brim is wider, Hole shaped like a “K” is removed and the Slit for the handle of the cup is widen to 25mm. Also check this amazing model out that…
I made this to replace the splash shield for my wife's Young Living Aria defuser. The one that came with it is a one post design and it gets broken easily. So I just made a quick 4 post design and it just sits in there. works great. I…
I remodeled the part to be a 1 for 1 replacement of the middle part of a ikea bomerang folding hanger. You need every other part of the hanger, except the midle part. I cut of the remains, of the old plasic part, off the metal hook with a…
I have scaled down my Technotrousers model to fit a Benchy. The smaller scale limits the functionality of the original trousers, but most of the detail still prints nicely. Main body is printed in two parts. The legs and feet are glued…
This is a 185mm leg extension for Core One users. For the Ikea lacktable : https://www.ikea.com/us/en/p/lack-side-table-black-brown-80104268/ Give you 1 ½ inch of clearance to add a light if you like. Printed in PLA , 15% infill, 3.0…
Assists wheelchair users with closing doors, not needing to risk fingers getting smashed in the hinges. Can be attached to the door with screws or using double-sided mounting tape. Printed in PETG. Use an M4 screw and nut for the…
I came across a post on Mastodon in which a user asked for a rather specific kind of cup holder for a person with motor impairments: https://chaos.social/@SebiPanther/111045681231848171 I haven't even received my Prusa Mk4 yet, but I need…
Fits the 2422/2424/5400 Series of Dual-Light flashlights manufactured by Nightstick. Prints with 3 walls using a standard .4mm nozzle. Prusa orange PETG works well for this print. will fit other flashlights with a 46mm head diameter.
This 3D printed component is a simple yet effective solution for the common problem of a damaged or missing belt loop on trousers. It works perfectly as a quick and durable replacement, allowing you to comfortably wear your belt again. •…
This holiday diffuser supports an insert that can be loaded with a cotton pad with aromatic oils. Clip it on an air vent, in your car, anywhere you would like to enhance the smell of the area. Simply put a cotton pad in the holder, drop…
I downloaded Teaching Tech's backplate for the BL Touch but after printing and installing I found that the X Axis limit switch was not engaging. I went about changing the limit switch cover but with testing I had found that it was the…
Work in progress - more insert types will be added, wall-friendly baseplate to follow. These Gridfinity inserts were made as a way to ad hoc add or subtract surface area in your critical listening environment. Write-up to follow:…
The Wuben E8 V2 I bought from CountyComm only came with amber diffusers so I recreated them to print in translucent filament. Two versions are available, the "no_bleed" version aims to prevent line-of-sight to the LEDs underneath and…
Turn your Jack-In-The-Box handle with a simple DC Motor! This turner prints in two parts and will hold a small DC Motor (in a micro-servo body) in the right position to turn the handle. A complete guide is in the works at ATMakers.org,…
If your zipper has damaged or you've put on weight and your trouser zipper can't take it anymore try my quick fix.
Holds a Baader MPCC by the external filter thread for fixed usage in a very low profile focuser UTA. Add three little wood slabs to the Backfocus setting tool so you have a handy driver to adjust backfocus, once. See the schematic to…
This adapter screws on to your Sony Digital Mavica or any other 37mm threaded camera so you can use it to reliably take photographs on most telescopes. I do not recommend using this option over any traditional astrophotography setup, it…
Wanted to create a night light that I could exchange the diffuser for sports teams, holidays, lithophanes. etc. Any diffuser that is 88mm x 88mm will work which means people aught to be able to use just about anything going such as those…
Olight warrio mini 3 accessory diffusing the light beam to spread the light all around. Two models sizes: - a small ogive shaped model, - a cylindric one which can be used as a sheath. Accessoire pour lampe Olight warrior mini 3…
If you use a fan in the Valve Index's front compartment, this modification of the visor by @LyzGameArt allows for airflow while it is attached. The slots don't need supports if you print the visor vertically from the top edge. The pins on…
This device can be fixed with two screws on the hoses. One of the models has a bigger hole so you can put the screw in easier.
I wanted to make a little shelf for my tea infusers because they get frequent use and they are too cute to hide in the back of a cabinet! Here's a link to the tea infusers on Amazon. I printed these with PLA, but you may want to seal them…
Here are some simple diffusers for 10mm RGB light strips. To make them easier to print, I divided each side into two halves, so for one side, print two copies and mirror one of them in the long direction. I glued them together in the…
Print settings Your regular print settings. No supports required. Recommmended materials PETG matte black PC Blend or ASA PLA I didn't test. Might heat up with high power strobes. TPU and print it scaled to 99.2-99.6% Supports: None Files…
Never even thought of it until I was looking at my post, but I could have just made an insert for the original Handle. SO... I did just now... \\\\\\\\\\\\\\\\\\\\\\\\\\\\\ I made this version to work with a simple 3mm hex head metric…
I really liked the idea of being able to toggle all the lights in my car between white and red, just didn't like how bright the MESO customs lights were when on... I designed these specifically around the 3rd gen Tacoma dome and map…
This was designed for a cubby which is 20" wide and 15" deep. The LED's stick to the “channels” (pointing down at a 45 deg angle) and the channels stick to the intersection of the cubby walls and ceiling. The diffusers slide into the…
Front and arear Bumper with diffuser, and side guard. Body pole distance 60mm (Fits perfectly on my Rapid-RC chassis.)
Spring bands that hold your trouser legs tight round the ankle so they don't catch in the bike chain or get oily, then pop off when you arrive. Wide and comfortable, with flared ends to slip on, and a shallow recess round the outside for…
Diffusers for the Go Peak Mini Flashlight you can find on Ali Express. Note that these won't fit on the 'fake' Go Peak flashlights that don't have the aluminium lens cap. The knock off ones have a plastic cap with a larger diameter,…
Overview A weather-resistant housing for the Bambu Lab LED Lamp Kit 001 puck, with three screw-on diffusers: a flat lens for a low-profile panel light, a dome for broad fill, and a tall lantern for 360-degree light. Four 10x3 mm magnets…
WHO IT HELPS People who cannot press individual keys with their fingers: upper-limb amputees (body-powered hook, myoelectric hand, residual limb), mouthstick and head-pointer users, people with tremor or reduced dexterity, and one-handed…
This was designed for a cubby which is 20" wide and 15" deep. The LED's stick to the “channels” (pointing down at a 45 deg angle) and the channels stick to the intersection of the cubby walls and ceiling. The diffusers slide into the…
This is a model of the Techno Trousers from Wallace and Gromit that I made with makerworld. This is the makerworld Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This holiday diffuser supports an insert that can be loaded with a cotton pad with aromatic oils. Clip it on an air vent, in your car, anywhere you would like to enhance the smell of the area. Simply put a cotton pad in the holder, drop…
If you use a fan in the Valve Index's front compartment, this modification of the visor by @LyzGameArt allows for airflow while it is attached. The slots don't need supports if you print the visor vertically from the top edge. The pins on…
Front and arear Bumper with diffuser, and side guard. Body pole distance 60mm (Fits perfectly on my Rapid-RC chassis.)
The mirror was not entirely trivial which lead to fail prints. So now you don't have to suffer like I did. I find it is necessary to add support to the part that holds the phone ( where the power cable would go. It is hit and miss. Some…
A simple filament caddy intended for the 3d pen users! No hardware needed. Just lubricate if needed. To load the filament, first feed the filament though the outlet. Then, take the fed filament and clip it to the slot of the internal…
A modified version of the SD Dust Cap by Boosun. The original was too long due to my mounted Sidewinder X2 Case (Tool Box) found at ( https://www.thingiverse.com/thing:5260814 ) It has been shortened by about 10mm but still provides good…
Yet another lithophane, this one for users of the TI-99/4A Home Computer or members of forums.atari.io NOTE: You MUST use 100% infill or it will not look good when finished.
With this model a blind user is able to draw circles with tactile feedback Use a pushpin in the hole at the rounded side to make a pivot point. then use the markers (0,5 and 1 cm) to measure the radius of the circle. place your pen in the…
Created this model because my belt screw broke. Mixed the model that fixes the bolt problem with the ptfe tube guide. The model press-fits into place, no need for glue (as mentioned in FranticOstrich 's post, you should try to get this…
