Liczymy pasujące modele…
This is an experimental device. Use with caution on your own risk. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 15 hours. Slicer settings: 0.3mm layer height, 4 perimeters, 30% infill (or…
Wydruk około 8,17 €–9,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an experimental device. Use with caution on your own risk. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 3 hours. Slicer settings: 0.3mm layer height, 6 perimeters, 60% infill (or more),…
Wydruk około 3,43 €–4,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This soap tray helps to keep soap dry and not dissolved by water. Bottom of the holder is at an angle and thus water flows out of it. It helps to keep traditional soap for longer use. Soap is your best defence for coronavirus. Use it…
A replica of the MBU-14 (V) 1/P Oxygen Mask issued to all Naval aircrew members in fighters like the F-14 Tomcat, F/A-18 Hornet, A-6 Intruder, and other aircraft EA-6A, KA-60 (refueler), A-4 Skyhawk, and T-28s. Although not 100% accurate,…
If you read this, please leave a ❤! While using my original design I noticed it was difficult to grab onto the build plate with one hand. The caddy was in the way! I've mirrored the design so it mounts on the back of the plate instead of…
Several designs of a shut-off valve for medicinal oxygen tanks or any tank with a similar mechanism. You can leave them attached to the tank for a semi-permanent shutoff mechanism.
Two models are included, the entire plate can be printed at once if you have a large format machine. For smaller machines, the plate is cut into 3 parts and fixed using 2 structures requiring 3.5 / 4 mm diameter wood screws (they must be…
This model is compatible with the lego system.
Gehäuse für Sunfounder 7 Zoll DIY Display mit HDMI Anschluss. Am Gehäuse-Oberteil ist im Layer 37 (bei 7,6mm) ein Pause zu generieren um die Muttern (M3) einlegen zu können. Gehäuse-Unterteil wurde in der Mitte etwas dicker gedruckt…
Printed on fdm printer @ 0.2 layer height. Use 4 or 5 perimeters, 20% infill. No supports I used the mouse ears at the corner to prevent lifting, they are 0.2mm high so can be popped off after printing.
Check out the new version! https://www.printables.com/model/1046454-drip-caddy-v2-for-heygears-reflex-rs The Reflex RS's flat build plate really holds onto resin. I didn't really like any of the options HeyGears provides. They were all…
This Model was remixed from the original designer @sciartist_1982253 . This remix was made so you can close the lid while you let the resin drip. This way one can leave without having to worry about any particles falling into the Resin.…
1/10th scale accessory. these are 80lb and 75lb midsize tanks The wheel is for the cart, Cart is being made out of metal so there is no stl for that. standard phone wire has red and green wires that will be great for the hoses I think.…
This is a remix of the original side drainer provided by HeyGears. With the original model, you'll have to use two M4x12 screws in order to secure it to the build plate. There are also other solutions out there to hang the buildplate at…
not sure if anyone needs this but i was asked to replicate a hygenex key for hand towels for a friend....please dont steal any handtowels :D I had best luck printing straight up with supports and a support blocker arround the base.
A simple and durable oxygen key/wrench for M2, M4, M6, M7, M9, M15, M22, M24, MD, ME, A, B, C, D, E oxygen tanks with 'post' type connectors
A smal holder for having the print bed in an angle for the resin to run off your print. Keeps your workspace neat and tidy. The holder needs little material, prints fast and is robust. You can mirror this part in slicer. Doing so, you can…
This is a remix from https://www.thingiverse.com/thing:2480271 Matches a 5 cm outer diameter pipe Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.15 Infill: 15% Filament: C-TECH ASA Grey…
mamiya press lens for Oxygen Camera
This is a model of a 4.2" medical oxygen cylinder. It can scale from from “ML-6” to “E” by varying the number of wall segments or scaling them. Paint the top dome green and the rest of the tank silver. Use the friction-fit connector rings…
Update 01/14/2025: As many have requested for different fume extraction methods. Now included the basic shape STEP file for cleaner remixes. Please share your remix, thanks. Connect your BOFA PrintPro or equivalent 50mm air hose to remove…
This shim will allow you to use your HeyGears Reflex build plate inside your wash bucket. The shim is pressure fit, and will line up roughly with the max fill line of the bucket itself. I tend to print a full build plate of smaller items,…
A small funnel that screws onto HeyGears resin bottles. It's designed to push down the spring-loaded stopper inside the bottle to allow resin to be poured into the bottle freely without needing to keep any pressure on it. The funnel is…
This is just a variation of my " Dust Cap for DIN Scuba Regulators ", but for regulators with a M26x2 thread for use with gasses with an oxygen content above 21% within the EU. Read this before you print or use it: I do not own such a…
Needed some words on it to be compliant at work.
A remix of "Drip Caddy V2 for Heygears Reflex RS" by wolffaayyy , this drip caddy adds a slight twist to the build plate mount, so that the center channel where the plate connects to the mount can drain. This does cause two corners to…
F-14 Tomcat Oxygen & Vent Airflow Panel
This Driptray can snuggly fit onto the Heygears Reflex RS Resin Tray. I created it, because when lifting the finished print i always had problems with Resin dripping everywhere. Now, you can just remove it and rotate it more easily to…
This is here only for legacy reasons. Please use the updated design: https://www.printables.com/model/1109161-heygears-reflex-rs-print-bed-holder-drip-caddy A smal holder for having the print bed in an angle for the resin to run off your…
I have made this Modular Propeller Guard to replace the ones that originally came with the HEYGELO Sirius S90 drone. With this new model, the protection area is larger and its resistance is higher. It is easy to assemble and is tight…
3d printable oxygen tanks for use in the Deep Rock Galactic board game, specifically the Space Rig Expansion. ROCK AND STONE
A wrench for use with medical oxygen tank valves. Three different openings for tank valve engagement. A high wall count is recommended to improve longevity. Fusion 360 source & .STEP files are included
4pcs Decorative Frames Panda, Crane, Tyger, Elephant Hexagonal
This model represents an oxygen pressure cylinder designed specifically for use in medical simulation environments. It allows users to connect an oxygen delivery tube and set the oxygen flow rate by adjusting and reading numeric values on…
This is a remix of the Heygears Reflex RS RefleXtractor by @Jerry_Lee to make use of 3in/80mm diameter hoses. The model was remixed to be smaller, easier to fit on most print beds, and printable in one piece. A few fitment tweaks were…
We have the amazing Sunnygeeks table by Rathskellers, and we had a tiny issue with the drawers on the short side of the table being free to slide off of the table. So I designed and 3D-printed a tiny bracket to stop them from sliding.…
This rack is designed to store multiple 5L O2 tank in a standing position. The main purpose is to avoid accidental hit and spill the tank.
I just modified the Gas Cylinder Valve Indicator from Luma, here on printables to fit my cutting torch oxygen tank. This tank has the type of valve knob with 8 ears. Picture of the valve attached. Check my other models for Acetylene cap.
This is an experimental device. Use with caution on your own risk. Check orientation of the knob's direction (+/-) before printing. Material: PETG 3D Printer: FDM 3D printer, average print time 30 minutes. Slicer settings: 0.2mm layer…
This clip will hold a oxygen hose next to a ResMed APAP/CPAP hose used with a oxygen bleed in. Clip is 3 mmm thick and the hose for the oxygen is 6.5mm the CPAP hose is 18.5mm
Oxygen Humidifier Bottle Adapter 40% infill for best results.
Jean Michel Jarre Oxygene fan art Category: 3D Printing
Oxygen Humidifier Bottle Adapter 90 deg. 40% infill for best results.
Combination of two models: https://www.printables.com/model/1067564-funnel-for-heygears-resin-bottles/files https://www.thingiverse.com/thing:3135135
Designed to hold this: https://www.amazon.com/JIAWANSHUN-0-1-1-5LPM-Flowmeter-Connector-Conectrator/dp/B01N0UWZ2T/ref=sr_1_3?crid=3GRLCMB1WWZYK&keywords=oxygen+air+flow+meter&qid=1655784141&sprefix=oxygen+air+flow+meter%2Caps%2C116&sr=8-3…
Simple slip-on protection to prevent the hose from kinking in the carrier bag. Fits hoses with a diameter of up to 6mm. The upper part broke off, but still fulfils its function. I would recommand to tilt the part and print with support in…
Adaptateur d'évacuation d'air UltraCraft Rs, se visse de l'intérieur après avoir passé le câble du plateau chauffant. Impression sans support.
I have an elderly friend who has to use an oxygen concentrator. Lately, he has been having an issue where the oxygen hose is bending and kinking at the end of the hose connector which was severely restricting his ability to breath. I…
Mounts are positioned for printing, no supports needed. Examples in pictures are printed using PLA Plus at .28mm layer height and 15% infill. I used 3 mounts total to hold the keyboard. They are designed to fit into the open space on the…
The current contest is called "Organization Tools" While this is meant as parts for storing stuff, I would like to submit a "Tool used in my organization". Boeing aircraft with Sky Interior (BSI) have a new layout for passenger oxygen…
Cassini–Huygens, commonly called Cassini, was a space-research mission by NASA, the European Space Agency (ESA), and the Italian Space Agency (ASI) to send a space probe to study the planet Saturn and its system, including its rings and…
If you have a threaded cannula, this model will allow you to press fit into it and then secure it from having it be pulled out. Print with PETG or PLA 30% infill. 0.2mm layer height.
You can print this model on most printers without support. It is there to help connecting different oxygen-connectors in healthcare use cases. However, it is important to say that it isn't an medical certified device, and I highly…
This is an adapter to mount your YGE Aureus 135 ESC to a Goblin Kraken 700. ESC is mounted with flathead screws to the adapter which then is being mounted to the original Kraken ESC mount. See the pictures for more details. For mounting…
Remixed from Quick Clip remix files on shapr. To be used with QUICK-CLIP (GEN 3): Base Starter Kit by Taylor.
PolarityGear Fidget Toy 2.0, Current version FT2e. I occasionally make adjustments based on feedback. So please provide feedback if you have any issues putting it together, etc. Changes include: -Tighter fitting parts for higher quality…
This is a super simple easy-to-print plug for the rear cover of the HeyGears Ultracraft Reflex RS. It has a hole in the center to accomodate the cable for the heated resin tank. All you have to do is print it in TPU and then do a small…
A small design for the kitchen rail BYGEL from Ikea. Unfortunately, the S-hooks are no longer available, and I have also been unable to find anything printable for the BYGEL series, so I have constructed my own. These hooks were printed…
Oxygen Tank Mount for Waterloo Medical Crash Carts, Model OTB-4 Example of this specific part here. The OTB-4 oxygen tank mounts for crash carts frequently break. Given that Waterloo Healthcare supplies over 5,230 hospitals with over…
This clip will hold an oxygen hose together with a CPAP hose to make movement easier with the oxygen hose inside an electrical wire wrap. https://www.harborfreight.com/1-4-quarter-inch-x-14-ft-protective-wire-wrap-66985.html Wire wrap…
Desk foot replacement styled as an AT-AT foot. Fits any desk with legs of Ø37mm assembly with M8 nut & Bolt
Standard PLA, Resin printing would likely be best. My 0.2mm nozzle couldn't print the finer details, so I ended up clipping the top half which is shown in the picture.
To put the collar on the tube, all you need to do is slide one of the open edges onto the tube, and make sure that the kink is completely covered.
Halterung für die YGE Propeller Positionierung. Der Magnet-Halter ist passend für den Leopard LC5065. Der Sensorhalter ist in Höhe und Distanz verstellbar und passt z.B. für den CARF KOBUZ 3.0 (Ps-Models Kobuz). Die verwendeten Schrauben…
replacement seal for an oxygen tank yoke I suggest printing out of tpu with 100% infill
This holder accomodates a YGE 95LVT electronic speed controller and the corresponding Texy telemetry adapter. Both can individually be fixed using rubber bands, O rings, etc. An integrated cable channel can be used to hide the cable…
This retainer clamp is to be used with the Hey Gears washing station. If the sieve in the washing tank shakes loose, you can insert this retainer and fix the sieve in place. This in only needed with the “old style” of tanks. The new ones…
This is a wrench to turn on and off medical oxygen cylinders. The other end is a 17mm line wrench to tighten or loosen the nut for the high flow hose for a ventilator or BiPap.
My own creation inspired by this Anti-Kink Adapter for 6mm Medical Oxygen Concentrator Hose by Iconman - Thingiverse . The original item fit tightly on the 66mm tube and caused the occasional kink at thee end of the kink preventer. I…
I designed these oxygen and temperature token for the Terraforming Mars: Ares expedition board game. Printing these things with a raft/brim is to be advised.. my printer had way easier printing it when that was activated. The temperature…
My very first model. Was made to hold extension tubing for an oxygen concentrator but can be used for any cords or tubes. Designed to be used with command hooks but feel free to edit it to have screw holes. made with Tinkercad -…
Customized version of http://www.thingiverse.com/thing:114247 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=114247 Instructions Using the following options: pin_cap_width = 4 ring_height_step = .5…
If you are a fan of the mascot Phryge of the Paris 2024 Olympic and Paralympic Games, this model is for you ! I created 2 models of medal-shaped supports to place the Phryge plush (model "Made in France") in a standing position. Medal…
There were some people in the sunnygeeks community that had some trouble with the cellarwalls moving when leaning against them if you are reaching to the other side of the table. So I designed these conerpieces which links your seperate…
This is a toy that requires 2 Polymagnets from CMR and a snap ring. It demonstrates the intermittent torque resistance the two magnetic discs produce when paired. The "dial" adjusts the distance between the two magnetic discs and…
Oxygen humidifier connection It has a 9/16' x 18 threaded connector print made on an Ender 6 - Creality 0.2mm layers 15% zig-zag fill made in ABS the software used was NX-Siemens
This is a basic oxygen carrier I made for my grandma who could not afford to buy one since insurance didn't cover it. It may wobble a bit if put on an uneven surface, so there are optional side supports you can glue on to make it easier…
Mod para instalar un filtro de carbón en la salida trasera para reducir el olor de la resina. Hay dos modelos para filro de 50mm y 100mm de profundidad disponibles en este enlace.…
It's a pretty straightforward build. Print out this model. Take one of your heygears resin bottlelids, cut the top off, and then superglue it to the bottle drip caddy. The bottle is light enough since it's basically empty. Just let it…
This is an experimental device. Use with caution on your own risk Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 4 hours. Slicer settings: 0.2mm layer height, 4 perimeters, no supports Post…
voici plusieurs modèles pour éviter le principal problème des tuyaux d'oxygène qui est la pliure de ces derniers compliquant grandement la circulation de l'oxygène. Modèle A > avec un petit rebord permet de faciliter le retrait du tuyau…
A simple medal with Phryge, the mascot of Olympic Games Paris 2024. It prints well with 0.2 layer. For best result, you can print it with 3 colors (MMU3 not needed). Very nice for children, to give as a trophy for some sports.
I wanted an oxygen wrench slim enough to fit in an empty shears pocket on my uniform pants, and long enough to leave a decent bit of the handle poking out to grab. None of the others I saw did both, and this also served as a good way to…
I am using an oxygen concentrator at night to manage my sleep apnea. Since these devices are very loud and disruptive to sleep, I've moved it to an adjacent room. This hose connector is used to connect a 7-meter-long oxygen extension tube…
Remixed to fit the Kegland version KL13185.
Created a tool to remove and install the outlet barbed fitting on a Inogen One G3 oxygen concentrator. The fitting gets removed or installed by slotting the tool over the fitting and turning. Make sure to print the model with the opening…
Someone reached out to me about getting a 3d printed oxygen tank knob. Oxygen tank knobs usually cost around $20 on ebay and amazon and they are usually 3d printed. I looked around and there weren't any print files available so I decided…
While HeyGears RS series is very popular, the Reflex series, especially the Reflex 2 series, is less so. But if you want to use HeyGears line of engineering resins, it's the better choice. Thus I went with the Reflex 2 for my maker lab.…
Herein are a valve wrench with a coil lanyard and attachment clip as well as a clip-on tank status indicator. All can be printed in PLA without support, but the wrench requires at least 4 perimeters and 40% in-fill (more of both the…
Model of the Huygens Lander, build by ESA, and carried to Saturn by the NASA spacecraft Cassini. It landed on Titan on January 14th 2005. Still to this day, it remains the farthest landing from Earth.
This is a case to build your own passive oxygen analyser with sensor cells retired from your rebreather. Considering the low resolution of the analogue readout this is obviously not suited for analysing gas mixes that you plan to use for…
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
This is a 3-in-1, toilet Paper Dispenser, Toothbrush Holder, and Soap Bar Holder. It is 100% Printable, but the lid may need supports on printers that struggle with bridging Gaps. I can't show a picture of a successful print, because my…
This attachments prevents maintenance sheet to cover important functional parts of oxygen concentrator. Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 2 hours (with Input Shaper on MK4) Slicer…
This is an experimental device. Use with caution on your own risk. The design has been made for the humidifier bottle with the diameter of 48mm. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 2.5…
Nice black ambient lamp led 250 lumen warm with socket G9 220/230 volt i used brass insert nuts & screws M2,5 *8
![IKEA THYGE desk replacement foot [AT-AT]](https://media.printables.com/media/prints/432521/images/3581277_d4a5faf9-984a-46cf-9ebc-98ad2c2bc60c/img-20220329-wa0053.jpeg)
