Counting matching models…
Printsettings: 0.2mm ~20% infill (still testing!) no support needed use PETG! PLA might be to bridle You need a rubber launcher! like this or this I'm currently trying to build a rubber toy glider, which can be printed in one piece…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
Update nov 2025: The spacers were a bit too short, which may have caused the lamellas to be slightly too squashed. I apologize for that. The new spacers should work better. Ideally, secure them with self-locking nuts and perhaps don't…
this is a lens cover for the Insta360 ace pro 2. I printed in TPU 40D. (PETG might work) there are two versions: WITH: to be used with the silicone protection around the lens. WITHOUT: If you lost that original protection ring around the…
hat / grip / handle for metric screws quick and easy to print and gives a comfortable grip to a simple screw. I uploaded different verions. here you can find the laboratory clamp:…
UPDATE: the old design is not balanced, when the boat is lopsided it swings to one side... A new version is uploaded A small wind vane for small sailboats, I needed one for my Pouch Faltboot. It can be quickly attached and detached so…
Huskylens cover take an M2 screw for the hinge. Or try to use filament instead I added a mockup of the camera as well This design is still in progress.
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 14mm You need to cut a M8 thread and use 2 x M8 screws with hat, (file included) There are two different versions. Both work well, v2 minimizes…
this is a ESP32 Cam mockup for further 3D constructions. it was not designed to be printed! I used it to construct cases like this
a necklace vase it also looks very nice on the wall, or just store it there on a nail. try to use it as a super tiny planter if you like it is a perfect last minute gift. I uploaded different versions, all have been tested to hold water…
TPU Propguards for Pavo20 with PETG inserts for more stability, but still bouncy and resistant. this is a modification of this Pavo20-replica whoop duct https://makerworld.com/de/models/53282?from=search#profileId-57500 PETG survived some…
this is a replica of a license plate lighting bracket for the VW T3 Bully. this is the right side. I'm not sure if the other side is identical. if necessary simply mirror it in the slicer. VW Part Nr: 251943139 print without support. I…
this is a drive 5.25" bay cover with grid for the DELL Optiplex 7010 it should fit the other models like 9010 etc. i arranged it that there is a continuous pattern in the form of the ventilation grille in the lower part of the computer…
This is a Gauss Cannon with bypass for several 15 and 13 mm magnet disks. 13 x 1.5 mm 13 x 2 mm (not tested yet) 15 x 2.5 mm it is Gravitrax compatible. inspired by uhltimate fast reload cannon (go check it!) I designed this one to fit my…
This is a simple Camera Protection for the Avatar HD v2. It weights half a gram. It has a small edge so that it easily snaps into the lens and stays in place. I printed in TPU. 0.2 layer
this is a quick small ball in two halfs as I lost our small cochonnet to play petanque. actually so simple that it's almost not worth uploading, but maybe it's helpful for someone. screw it together with a M4 screw.
After years of pain I made a set of simple tools to tighten and loosen the most common panel nuts found in (my) DIY electronics projects. like EuroRack modules 🎛 microcontroller Project cases 🎚 ... they've made assembly much easier for…
UPDATE: You should go with this multi-material version instead: This is an experimental 80mm passive radiator , designed to enhance bass response in small DIY speaker enclosures. I printed in TPU , and added the option for a M6 screw as…
This is a very practical magnetic ring to have screws, bits, nails or other small tools quickly at hand I used round neodym-magnets with a diameter of 4 mm and a thickness of 2 mm. Do not use heat to insert the magnets, as they will lose…
this is a foldable 52mm lens hood printed in TPU. It fits my old 52mm lenses for Nikon kameras but should work on any lens with 52mm thread. I use it on my 50mm lenses, wide angle will get some vignette ;) My Printsettings: TPU 40D 0.2mm…
A simple case for the FPV Camera AKK KC53 It is LEGO compatible so you can just pin it to your Lego RC vehicles and off you go! The case gives the antenna a nice amount of support. I added vents, but I can't say whether the camera might…
this is a mockup of the ULN2003 module Stepper driver for further 3D constructions.
this is a mockup of the ESP32 LOLIN board for further 3D constructions. it was not designed to be printed!
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version you might also be interested in my…
i need a crash flange so i designed this one. It serves as a holder at the bass drum, which is a converted 16" floor tom. It can be used for crash or ride cymbals that are not too heavily used. but of course there are limits. for my…
I've lost the body mounts over the years so I desided I'd build new ones. I didn't have the originals to hand, so the shape of the parts are freely chosen and built with the focus on easy printability. Parts: 9115049 I added a version…
dragonball Hero (whose name I do not dare to write here due to copyright) inspired Clock Printing: print in your favorite color combination. don't forget to set a color change for the numbers you can use the original clock hands or the…
this eyecup for my old Nikon camera blocks out ambient light when looking through the viewfinder. I use it on my Nikon FE and F3. it might fit to other brands with same system of viewfinder. it is very pleasant to use and to focus. It…
A Playmobil motor adapter + Benchy cabin to screw onto a piece of wood. (playmobil motor: 5159) perfect for use in small pools or bathtubs. Most Playmo boats are too big for that bring a piece of wood into a rough boat shape, and screw on…
this is a Huskylens Cam mockup for further 3D constructions. it was not designed to be printed! I used it to construct cases like this
This speaker cover is specifically designed for the IKEA Vappeby Bluetooth Speaker (Gen 3). It not only provides protection agains babyfingers ;) but also adds an aesthetic touch to your home. The cover is printed without bottom and top…
this is a set of camera thread adapters for mounting cameras, ball head, Magicarm and such with supporting M3 screw as internal stabilization they are therefore much more stable and are less likely to break. Still, better do not attach…
This is a simple and useful mount for the small 28BYJ-48 steppers. I used it with 20-30mm suction cups. choose good ones and it will stick to a window for months. I have also included a matching wheel for those who may need it.
this is a clutch/gripper for holding or mount items, cameras, chemical stuff. originally intended as a 3D sketch for a version made of aluminum, it turned out that the printed version is also relatively strong and sufficient for my…
I needed a S8 case with slot for credit / ID card, so I remixed this case. thanks for the initial design tato_713 In the lower part there is a small gap to slide the card up. I m very happy so far. You can also put two cards in together.…
this is a Ikea Hjälpa hinge plate replica. It works but will not last long on heavy doors. I hope it helps someone fix the cabinets ;) for assembly you can use the old 3mm pins from the original part. If these are lost, other 3mm screws…
This is a case for the ESP32 Camera and a pair of 5mm IR LEDs (or normal LEDs) be aware that the IR filter on the lens must be removed in order to convert the camera to night vision. The process is not without risk, as you can easily…
This is a useful laboratory clamp to connect 4 pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version this is a simpel parallel version you…
his is a mock up of a rotary encoder for further case designs sizes and dimensions have been measured carefully Ill be happy to get feedback once you used it ;)
slotcar rear tire-replacements for the Autobahn 4004 cars This old toy is still great fun, but the old rubber tires are now so worn out that the cars no longer run. I didn't expect a TPU print to be such a good replacement. The cars drive…
🌀 This is a fun and fast-paced mechanical game inspired by classic spinning top toys. The idea is simple: You launch a spinning top into the arena, where it strikes and scatters several 12 mm balls. The balls bounce around and eventually…
this is a mockup of the Power Power Supply Modul DP50V5, DP30V5A, DP20V2A for further 3D constructions. it was not designed to be printed!
This is a heavily adapted remix of this case. adapted to suit the USB C Version ESP32-E32 closed all cutouts added buttons added space for battery or else. Print without support
⚙ This DUPLO-compatible gear set brings motion and mechanics into the DUPLO universe. There are two different sizes of gears (more to come) allowing kids (and adults 😉) to build simpl ratios and explore the magic of rotation Perfect as a…
Beyblade Burst Disk. redesign in two parts for better printing (no supports) and easy combination. Another advantage: if the upper spikes break off, just the top part has to be reprinted.
I prefer wearing the goggles with an additional top headstrap, which is what this simple mount tab is for. For me, this increases the wearing comfort significantly. I reused the headstrap of betafpv goggles that I had lying around. I…
this is an adapter mount for the Walksnail Avatar USB C for the BetaFPV Pavo25 v2 Cinewhoop Since I either lose the adapter cable, tear one of the cables when connecting it, or bend one of the tiny pins, I decided to permanently mount a…
This is a case for a Raspberry 5 + NVMe and full size HDMI adapter It will fit the following Adapter boards: 52Pi Micro HDMI to HDMI Multifunctional Adapter for Raspberry Pi 5, with PCIe 3.0x1 M.2 slot, Support M.2 NVMe SSD 2230 2242…
USB C VTX Walksnail Avatar adapter mount. Since I either lose the adapter cable for the Walksnail VTX, tear one of the cables when connecting it, or bend one of the tiny pins, I decided to permanently mount a USB C adapter to the drone. I…
This is a custom 3D-printed holder for standard high-power LEDs mounted on 16mm star PCBs. The mount is designed to securely hold the LED board and allows for easy attachment to various surfaces using m3 screws. No more hassle with gluing…
Please note: I haven't tested the driver very long yet. If there are any weak points, I will try to improve them in the future… it might be total crap… let's see ;) EDIT: I added a simple version which is printed lying down, takes ~ 30…
to squeeze the 3090 founders edition into a mini ATX housing, I built this flat bracket, maybe it will help someone.
this is a mockup of the FPV Camera AKK KC53 e.g. for further case designs sizes and dimensions have been measured carefully Ill be happy to get feedback once you used it ;)
This is a mockup of the USB C Adapter module for Walksnail Avatar HD Kits to customize printed parts for your drone. I used it to design a mount to implement the USB C plug directly to my drone - Pavo25 v2 if you like - leave one
Video: https://makertube.net/w/vANtT1WsL4XTv4JoAHnRSv DIY 80 mm Passive Radiator for Custom Speaker Projects 80 mm diaphragm diameter Mounting with 6 × M4 screws Tunable resonance frequency by adding mass Designed for multi-material 3D…
This is a simple snap-in Air Vent designed for DIY grow boxes made from transparent plastic containers, such as those from IKEA (e.g., SAMLA boxes). It enables better air circulation and is easy to install without glue or screws, just a…
🌸 This printed mini vase is designed to fit into a standard front bike light bracket. If you’re like me and have switched to a rechargeable bike light, you might be left with an empty, awkward-looking mount on your handlebars. Instead of…
Bose QuietComfort 35 custom ear cups. Since the old covers were quite worn out and I simply didn't like the gray anymore, I'm glad to be able to print my own now. They should also fit the version II . Please give me a message to confirm.…
Toggle Switch Mockup/Dummy for CAD Projects This is a simple model of a standard toggle switch, intended for use in CAD designs, project mockups, and enclosure planning. The model is non-functional and created purely as a visual and…
I bought the GLH-S-2800 in summer 2025 but unfortunately, they changed the design slightly… Otherwise, I followed the instructions of the original by 3DTom I got a stainless steel sheet cut into dimensions and screws for €5 at pro kilo…
Replacement for the two plastic bevel pivot segments on the vintage Festo/Festool ATF 55 circular saw series. These parts (Festool spare parts #438855 and #438856 ) sit in the base plate assembly and form the tilt mechanism that allows…
Simple reusable lids for common Crème Brûlée dessert glasses. Perfect for covering desserts, leftovers, or small food portions in the refrigerator two sizes of top diameter: ~ 55 mm ~ 65 mm I printed them in PETG with a (colorchange) TPU…
Replacement for the original plastic guide rail segment on the vintage Festo ATF 55 circular saw series. This part sits in the base plate and slides into the guide rail groove, allowing you to eliminate lateral play and precisely adjust…
These are all currently available results.
