Counting matching models…
11/22/22 update: If you are interested by RC boats check my other design at https://www.printables.com/model/322399-zryw-1-an-hydrofoil-rc-passenger-boat ------------------------------------------ This is a project I did in 2021. I'd been…
18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…
June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be attached to the front with 4 M3 screws. When using my chassis you…
18/12/2024: Well if you are into Dodge trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 08/11/24: Added a missing STL in the gearbox:…
This time it's a full redesign including the gears… And obviously in order to reduce the size, I had to make some compromises. So I no longer use ball bearings for the spider gears which are now directly on a tiny PLA axle. As the spider…
6/1/25: I'm adding a version with no interior (DodgeRamFull) which should be safer for kids. It prints slightly faster as there is less perimeter. The NewDodge version is nicer but when pressing on the cabin (or falling on the floor) it…
06/01/24: I have released my UNIMOG RC Chassis (model U5023 - 2014) at 1/10 scale . Remixed for my Unimog RC design (in progress). See my Diff #4 for mounting instructions. You need 8 MR63ZZ ball bearings per differential (for Unimog 16…
08/24/26: I've released a bigger version: 12/16/22 update: I finished printing using vanilla white PLA from Prusa. I’m updating some files as I encountered some issues. I also refined the mooring parts by making cleats so that’s also in…
This works like an open differential but unlike an open diff it will send some torque to the non slipping wheel. It is compatible with my RC car V2 https://www.printables.com/model/281110-new-design-rc-car-v2-almost-fully-printed ; I've…
My 2 previous designs didn't work well when trying to compensate suspension and steering, as a matter of fact they are only suitable to compensate slight misalignment for normally aligned shafts. So I will only use them between the…
February 2023 update: Added a tonneau* (in french dans the texte) cover with some cable management (holes) and a place to stick the power-on switch that kept hanging out of the car. This can be used with the V2 of my RC car. You need to…
It took me some trial & error to come up with this. It is most certainly not final because I need to tune it with the weight of the car. When loaded it should be partially compressed leaving some room for more compression and also some…
This design is a CRAWLER Gearbox that can replace the stock 2 speed automatic GBX in my UNIMOG RC Chassis (model U5023) . It is smaller and looks more like a gearbox ! The idea is to make the truck more of a crawler type with a lot of…
This is a part of the cabin design of my Unimog RC project . I'm providing the 1/10 print files but also the 1/5 in case you want to use it outside the design. I'm using height range in the print files in order to get the top part as nice…
Please print this model on the side… At 1:43 you won't see the VW logo but it should look like a GOLF and it has spinning wheels ! It looks nice at 0.2 in PLA with no supports. Fun fact: this car measured only 3.7 m in length and weighed…
This is the grill for my Unimog RC project ; the chassis is here and you can also browse my other models to find other UNIMOG accessories. Mounting is pretty straightforward; glue the black backgrounds (round one for the Mercedes star)…
RC Car V2: Updated 08/02/23 This is the differential I use in my RC car V2 design. It's a major modification of this design https://www.printables.com/model/246505-updated-rc-car-differential-gearbox Key things to know: I am now using 3…
This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…
28/02/24: Found a bug ! You need to use the new files… I also improved the overall rigidity by adding a PLA slide. TPU spring printing: I'm providing a “color change” in the print file; start with PLA (less than 1 mn) then put TPU. This…
Unimog RC This is a subset of my new RC truck project that should allow to build a fully functional RC 4-wheel drive truck, based on the UNIMOG 5023 chassis (at 1/10 scale). I'm trying to build the 6 meters version. I am printing again…
A slipping gear is a very simple torque limiting device like the torque limiter of a drill. Why would you want that, and particularly in a RC car, which has an electrical brushless motor? One use case could be to protect the motor in case…
I'm posting the latest version of my design, as file update on an existing model seems broken… So disregard the other design as it is now missing some files… This new version has a simpler sun gear output axle (no screws, one single part…
You might have come across my slipping gear https://www.printables.com/model/490489-slipping-gear-clutch-gear-for-rc-cars and I have explained why I needed that. Now here is another piece of design that can work with my slipping gear but…
I designed this because I wanted a more realistic tire model for my RC car designs. So here goes! The tire prints without supports and without infill when put on the side. With TPU it should take ca 10 hours per tire (0.3 Draft) . The rim…
The summary says it all… Mount with 2 screws (use the holes closest to the bumper). This goes with my UNIMOG RC Chassis .
This is the second stage gearbox I'm designing for my Unimog RC project. The second photo shows my UNIMOG RC assembly in progress… While the first stage (to come) is a classic ( fixed ratio ) gearbox with a ratio of 5.5:1 (meaning that if…
This goes with my UNIMOG RC Chassis . The tank and the box are… empty ;-) See for yourself when printing (tip: set infill at 0%) … I had some trouble with all the screws that were in the way so the bracket had to be tweaked. Mount…
31/12/24: Adding the exhaust pipe. This goes with my UNIMOG RC Chassis . For the exhaust you need to remove the battery shelf and then screw x2 from inside the chassis. The Ad-blue tank includes the bracket for the steps and has also 2…
This is my third tire design and this time it's a new tread profile, Michelin's Alpin 6 winter tire. The tire prints without supports and without infill when put on the side. With TPU it should take ca 2 hours per tire (0.3) . The rim is…
13/10/2025: Added 1 part body stl & print file 25/01/2025: The version with 4 spinning wheels can be found here . 18/12/2024: I have released the 1:12 RC chassis. 04/11/2024: I have now released a bigger 1:12 version…
This is a vintage iconic model dating ca 1970. The print from the cover picture was made with blue silk PLA. The other make was made with neon green translucent PLA and variable height + adaptive cubic infill (hence the stripes)… I'm…
This is a part of a bigger project and mounts on my other model (the gearbox) and should drive a differential gearbox (yet to come). A dual coupling is needed when you want to link 2 rotating shafts, even if they are supposed to be…
This is a part that I need for my automatic 2 speed gearbox (my first attempt is here ). The current version of the gearbox works as intended for a medium load (the gear ratio changes from 1:1.8 to 1:1) but for a high load the…
This is the size I'll be using with my Dodge Ram remixed body ( I'm going to re-remix this body but that's another story !) The tire prints without supports and without infill when put on the side. With TPU (depending on the brand) it…
The is the new driveshaft that will be used in my RC Car V2, five times ! It drives the wheels (that's 4) and is also used for the front transmission. The overall length is ca 60 mm and it is still a double universal telescopic joint.…
As users were still downloading this design even though it was broken I have decided to fix it. It should now be identical to my updated design https://www.printables.com/model/246505-updated-rc-car-differential-gearbox which I'm using in…
This is based on my RC tug model roughly at 1:220 scale. At 0.10 it took me about 4 hours on my MK3S. I always got frustrated by the famous 3DBenchy as it does not really look like a boat. But that's me! This is a torture test because…
This a first subset of my new RC car project. I'm trying to replicate as much as possible a European medium compact car at 1/12 scale (in the likes of a Peugeot 3008). Usually, these cars don't have a double wishbone suspension so I had…
18/12/24: The chassis can be found here . 17/12/2024: Added a few pictures with the chassis (to come). 25/11/2024: The new V3 release is still (almost) glue less but now, you don't need paint either… All the black parts in the design can…
This will go times 2 in my RC 4WD design (in progress) but it also drives (partly) of the overall design size. So I decided to streamline a little bit. I was able to design a print in place part (much shorter) but prone to breaking (!) So…
My former tie rod design also had 2 ball joints, but due to their vertical orientation (the screw tube orientation), movement was limited as the screw tube would come in the way of the joint at a relatively small angle which lead to…
I hope this bigger version can really navigate and rise on the foils... We now need a 2216 motor preferably at least 1300 kV , 2000 is better a 30 A ESC or better a MG90S servo a propeller shaft from Raboesch (model 300-01 270mm/210 mm…
16/12/2025: I improved the Mc Pherson strut TPU spring using the design in my shock absorber #4 (New updated STL for part MCP07 and new print file). Print TPU on some masking tape to protect your buildplate. You can also use shock…
The former spring was quite fragile because of the print orientation; it would separate in 2 or 3 parts after a while. This design is basically two small springs similar to my PLA/PETG springs like in this design connected together so…
When making a few print in place / no support toy cars here and here I realized that I could also make a model based on my 3008 body design with a better accuracy. 1:24 is the ideal scale to keep most of the features visible while keeping…
RC Car V2: This is a subset of my new RC car project that should allow to build (again) a fully functional RC 4-wheel drive car, but just a little bit more realistic or should I say to …"scale". I just started printing the first few…
I've since released the car ! You can get it at: https://www.printables.com/model/281110-4wd-rc-car-185-parts ----------------------------------------------------- This is a subset of a bigger project that should allow to build a fully…
Pour fixer sa livebox 5 au mur … Impression PETG des fois que ça chauffe ! (et aussi pour la flexibilité comme ça tient par pression)
So this is a RC CAR body version of my BMW 2002 toy-car with a 208 mm wheelbase which is exactly to scale to the original car. I'm also working on a RC chassis which will use this body; when ready the link will be here. If you have…
This bridge is quite big (1.10 m) but you need that for the train to be able to climb about 12 cm in order allow another track to pass under the bridge. However you need to be reasonable and keep the train as light as possible. Because…
The plastic pods tend to break ; and if you are buying seeds instead of the plant capsules you might need this ! My daughter has 2 modulo nano gardens - that's 8 pods total ! This is not an exact replica of the original pods but it's the…
This is inspired from commercially available products that cost ca 160 Euros. It uses mosquito bait (scent) you can get from Amazon. This design should cost you less than 30 euros in case you need to buy everything. To make this mosquito…
This is a design that prints without supports… I printed this in PLA and yes I know that tires are supposed to be made of rubber ( in 3D print TPU is the usual substitute) but as my car is going to field test in the garden with grass and…
This is my fifth take on this crucial part… It will be used on the front axle of my new RC car project - Peugeot 3008 RC. This time I wanted to reduce the size as much as possible while still using no screws and keeping the ability to…
For all outdoors designs you need to use PETG! PLA will melt with or without global warming… You will need ca 450 g of PETG; the color matters (no white or translucid filament); I use grey. Hole is 28 mm (dimensions for coal tits) There…
This is one of my proof of concept designs for the rear axle. (I'll be using a McPherson strut suspension for the front axle) First of all this is NOT the rear suspension of most of the current cars which is a torsion BEAM suspension (I…
The main challenge for the 3008 RC car is being able to fit everything under the hood because the body is to scale (1/12). So here is a variation of the gearboxes you've already seen on my other RC car projects. As usual the input comes…
This is a replacement part when the pull part of your zipper is broken; it uses an 18 mm metal key ring. There is some slack so the ring should move freely. Put the part of the ring that opens out of the printed part. I designed this…
For all outdoors designs you need to use PETG! PLA will melt with or without global warming… Print settings: 0.3 draft, gyroid 10% infil. It will nearly max the Prusa MKS3 buildplate (rotate the BH body 90° so it fits) For the front panel…
This is a Lego Duplo compatible railway track normal length. You will only need supports for the 2 connectors. The rest should work with bridging. This was just a training (wink). My real goal is to design the Duplo bridge ca 1 m long…
You will need 4 slides (2 doors!) If they break again: reprint! Use PETG (PLA will melt in summer)
My use case for this device is the basement fridge we only use for parties or when friends are staying over. The rest of the time this fridge is powered down. With this tool the fridge doors will stay open and you won't close them by…
This is a test jig ; it allowed me to test that my dimensions were correct. Of course you can also use it as a brick ! Print with no support and no infill. PS: Please be aware that actual printed dimensions depend on your printer and…
This phonestand is easy to carry with you all the time as it can stay flat when you don't use it. Unfold carefully (at least the first time). This print-in-place design includes two hinges: one close to the top and the other one close to…
Well the “universal” clamp shape didn't fit the stroller so that the umbrella couldn't stay in position. This design has a print in place hinge (with supports however) + screw to secure the adapter onto the stroller. Now the “universal”…
This differential is a clutch pack 2 way limited slip differential . It has the exact same dimensions as my diff #6. (so it mounts seamlessly in my new RC car replacing diff #6) Why did I design it ? Well my previous limited slip…
I made this for the fidget contest so it's really a “flash” design ! So, not so much for the looks! So many fidget thingies already exist on this site and others (thingiverse) some are even commercially available; I hope I came up with…
This is a set of shims and drilling templates I designed as I was building stairs for my deck (2 steps). They also ensure a 5 mm spacing between boards for expansion. In France, the sections for standard boards are 145 mm x 27 mm or 120mm…
My JBL 3 flip Bluetooth speaker can either be standing on my desk or laying flat if I have enough space (which does not happen a lot!) so it is usually standing. But in this configuration one of the woofers is facing the desk which is not…
The exit hole of my basement ventilation was too close to the ceiling, so I designed this. I do not know if many people have this problem, but I did, so I had to fix it. Because I was getting tired of cutting the upper part of the new…
This is my 3rd limited slip Diff... So what's new ? This time I've tried to be as careful as possible with tolerances and play, with the idea to make not only a working RC car differential, but also one that could be more durable (as much…
If you still have this wardrobe, you may have encountered the same problem. After the 10w halogen lamps have mostly died on you, you are left with no light in your dressing room! Nowadays it is very difficult to find replacements. So, I…
These are all currently available results.
