Counting matching models…
About I have a one socket and a plug that is super hard to remove, so I created a handle to make it easier to remove the plug from the socket. Should be compatible with standard angled plugs used in computer electronics, home appliances…
About I wanted to have more compact version for more tips with option that tips will not fall off if held sideways or upside down. I took original ‘Bin - 1x1x3 - pmcquay.stl’, added fill and holes with tiny locks inside the holes that…
About: I usually use CR2032 and small button batteries (such as LR44) only, and could not find anything small that would suit my needs. Can be used with 6x2mm round magnets used in gridfinity sets. Big hole diameters - the one on the top…
About: VESA 200 to 100 adapter compatible with VESA Norm MIS-E. This is just horizontal bar which is printable on Prusa Mini+ if printed diagonally. Anything else would just not fit in the Prusa Mini anyway. There are no holes for screw…
About Quick and ugly remix to allow charging 18650 via HW-373 TP4056 USB-C module, which has larger diameters. The external dimensions are the same. Lithium Battery Charger Li-ion Module TP4056 USB C mock up was used to alter original N…
Remix, gives a bit more air between mesh and the fan spinning parts. A bit thicker Z axis (3mm) strengthened around holes in the corners thin mesh, around 1mm. Please give a like and post makes and provide comments for further improvements.
About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…
Notice This enclosure is still quite small to host other modules with it, unless you remove pins and solder directly to the dev board. About: Modification of General purpose ESP32-WROVER Web Cam module Mount . - extra holes for air…
Support stand for Anatomic Heart https://www.printables.com/model/5612-anatomic-heart-multi-material Not printed thus not tested. In tincercad web physics animation shows nightmare probably because tinkercard has issues with calculating…
About: So I printed Miniature Vise 2.0 (much easier to assemble and 100% printable) and noticed I do not have a bolt for it. Yet the Miniature Vice 2.0 => 100% printed, no metal parts required contains the bolt but it has different head…
About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…
About V-Slot 2020 Handle with M5 screws, with a width of just under 20mm so it is not wider than the v-slot profile. Original handle was too wide so I just removed the parts between the screw holes and the handle edges. Also usable as…
About Gridfinity bin for Waveshare 1.69in Touch LCD Module. You will need at least 2x M2x12 screws to screw it into place. Used Bin - 1x1x3 - pmcquay.stl as a base model. Part of my smart enclosure for 3D printer . Please give a like and…
About: Remix of 3 GoPro Extensions Strong Ends by tmorris9 . took the longest one and then extended it length between screw holes is 220mm printable on Prusa Mini+ diagonally total size something under 234mm Please give a like and post…
About: Remix of Multisensor ESP32-WROOM-32 NodeMCU ESPresense by teaser : Added camera hole (10mm hole) Expanded area for extended builtin wifi antenna on modern nodemcu boards that protrudes outside of the dev board Wider hole to connect…
About Original Prusa MINI Enclosure comes with the temperature / humidity bracket which can be mounted only on the front/back holes of the enclosure, due to the fact that those holes are 60mm apart. I modified the Guide & Covers >…
About I needed 4 channel relay module dummy for other designs in 3d and physical, just to avoid damaging the original ones. Notice that underneath you should leave about 2mm for the soldered pins from the elements. Please like, create…
Overview: Remix of 'Snap together Mini+ light' by @Aargon_207387 with wider inlets for LED strips, for example 14mm wide. Please give a like and post makes and provide comments for further improvements. Known limitations: Due to the fact…
About I had to squeeze printer with an enclosure to the closet with limited depth and sliding doors, also I've been using Mini rotated that way for over a year now, so I decided to also adjust the enclosure. This was NOT designed and thus…
About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…
About Gridfinity bin for Waveshare 1.28inch Round LCD Display Module with Touch (Waveshare 24155). You will need at least 2x M2x12 screws to screw it into place. Used Bin - 1x1x3 - pmcquay.stl as a base model. Part of my smart enclosure…
About I needed non-stackable version of Stackable SSD Case for Intel NUC , so I remixed it: this was designed and tested for D34010WYK model only much easier to mount SSD disk reuse original bottom part with the rubber feet - also cutouts…
About I've got two Adafruit ESP32-S3 Reverse TFT Feather and without any enclosure or stand it is a bit inconvenient to use them, especially if you have a lot of other tools on the messy table :D Thus I mixed gridfinity bin 1x2x2 from the…
About Load Cell mod for IKEA Samla Filament Spool Roller - if you know the spool weight and the total spool weight and diameter, then you can estimate how much filament is left. This helps in planning what else you can print minimizing…
About Raspberry Pi GoPro camera mount compatible with RPi 4B aluminum case with dual fan. Please give a like and post makes and provide comments for further improvements. Assembly You must slide it in from the Ethernet/USB ports ports,…
Tissue Box - Yawning Charlie Chaplin. You can snatch a tissue using this old comic gag. Please give a like and post makes and provide comments for further improvements. Releases : - v1 - initial release, quick and hacky just to see if…
About IKEA Tral has a mounting between the lamp and the GU10 ceramic socket, that uses two metric screws to keep it in place - the problem is that the mounting totally shattered around the screw heads and it just fell off. So I did a new…
About Mean Well RD-50A terminal cover done from scratch. On the photos there is a version without an additional mount hole to the right because I do not use it, also quick ugly print, but usable. Please give a like and post makes and…
About This is just a remix of a fragment, you still need other part from the original model - give them kudos as well! Added additional holes for air ventilation tinkercad. For low power devices (your load is under half of the SSR spec)…
About Models for helping making designs for enclosures which use DFRobot Gravity push buttons such as: DFR0785 series - round ones, link DFR0785-B DFR0785-G DFR0785-R DFR0785-Y DFR0785-W DFR0789 series - square ones, link DFR0789-B…
About I needed to install Athom Power Monitoring Mini Relay for ESPHome, so I quickly designed one. This was designed to be screwed into the wood plank, the distance between the external holes fits into a grid 20x20mm lines, holes for 4mm…
About Trinket hanger for typical gas pipe in Poland, which is 25mm in diameter, but the model can be scaled to fit any pipe or round rod that you have. Useful during Xmas, or Halloween, should be durable enough to hand plush toys, xmas…
About: Gridfinity 1x1 support base for box of water-soluble tablets (such as Effervescent). Additionally those boxes are ideal as ESP32 cases with extra modules. When placed upside-down they tend to wobble, so I created a support base…
About Nevermore Micro V5 Duo Lid for HEPA filter mod: aligned fan holes bigger fan holes extra hollow areas on the walls for better flow one extra mini-support for the filter tested with Nevermore Micro V5 Duo V2 Changelog 2025.06.26…
About: Support base for box of water-soluble tablets (such as Effervescent). Those boxes are ideal as ESP32 cases with extra modules. When placed upside-down they tend to wobble, so I created a support base that you can use to stabilize…
About Gridfinity holder for 3DJAKE Nozzle changer kit (CB-DW5B) - just the top, which can be pushed in into any 1x1xY box - I took 1x1x3 pmcquay bin as a base in it. Please give a like and post makes and provide comments for further…
About Trinket hanger for a square metal rod for curtains, rod size 12mm. Can be also used on square pipes. Useful during Xmas, or Halloween, should be durable enough to hand plush toys, xmas decorations, light strips etc. I was sick and…
About Crocs LiteRide fix for the heel strap I stepped on the shoe incorrectly and crushed pins and the sockets in the heel strap. Why not to print it horizontally so it is stronger? When printed vertically it will get lower strength -…
About Found old flexible hose and decided to adapt it to the Dyson V8 (or compatible). This allows you to use Dyson V8 and then attach a hose to it (the direction is important). Then if the hose has a 32mm pipe with a metal pin lock on…
About I use side panel as a doors in Prusa Enclosure Mini, and I wanted to move the LCD panel. This is the result - Prusa Mini Enclosure LCD Side Mount Frame. You can adjust the placement of the frame to fix it in desired location. You…
About Clips to keep lid closed for drybox from PANTRY storage box 11L (EAN 8694064003828). Box has dimensions for 2 standard 7cm filament spools. Unfortunately the top edge is flat and it does not give edge to grasp the clip, so I had to…
Prusa Mini+ Hot Bed Guard Rail makes life a bit easier to avoid putting objects in the space of the moving hot bed, especially if you have rotated printed as on the photos. Please give a like and post makes and provide comments for…
About I have Victorinox Swiss Army Knife with always open knife blade for easy access (and because I can't grow long enough fingernails :) ). Recently I decided to have a decent place for it instead of keeping always open on the table. I…
About I found Optik-Cabinet 80 (yes this is old), and it was missing little parts to be able to attach small lenses to it - part item 22. So I recreated it from scratch. Please like, create makes and add comments also to the original…
About Found old flexible hose and decided to adapt it to the Dyson V8 (and probably other compatible models) The hose origin is unfortunately unknown to me (probably Philips?). I noticed that…
About: Not tested with classic 6 wall Menger Sponge / Menger Cube , though - may work or not. This was explicitly designed for Menger Sponges in the shape of pyramid (5 walls). I printed a few Sierpinski Pyramid models and glued them…
About Gridfinity 2x4 Stand for Zhaoxin Soldering Station. I used Cover - 2x2 - atucom.stl as a base (can't find now the source, though, also 2x4 was somewhat broken so I readjusted two 2x2). On the photos you can see Zhaoxin Soldering…
About: I needed to connect old vacuum tools to the another vacuum pipe. Tinkercad for the rescue. Please like, create makes and add comments also to the original model, thanks! Dimensions : - internal diameter 32mm - one end - internal…
About I had some Logitech X-230 speakers (2.1 setup) and the right speaker with a controller somehow lost the cover on it, so I redesigned that from scratch. Not great, not terrible. Please give a like and post makes and provide comments…
About There is a lot of symmetrical bins for pliers, but I wanted to put in one place two pliers with different diameters next to each other. And thus I just remixed…
About Allows mounting LED strips/bars horizontally under the IKEA BROR metal shelves. Can use a common gridfinity 6x2mm magnets for mounting or double side tape. Different models with hole, without hole and without magnets. Please like,…
About Lens Cover for 78mm in diameter. Small three notches can grab up to 2mm of the edge on the lens (see last photo). Please like, create makes and add comments, thanks! Changelog 2025.10.05 - initial release Print provided gcode is…
About I got a M5Stack Core S3 SE as a present and I decided to get a better stand for it. Extra holes on the bottom 6mm diameter to allow putting the screws and screwing them in. Photos from Sunlu PETG Coffee Brown that was pretty wet and…
About Clamps to fix tool stations in place, probably fits other models as well. Zhaoxin Soldering Station 936DH and similar Zhaoxin SMD Rework Station 858D ( hot air station) and similar Please like and publish makes and provide…
About I had to print 2kg spool on the Core One L and I decided to remix two models into a one set. The set has 3 models in total, and you probably just want to print two of them depending on the printer you have: 2kg no gap spool holder…
These are all currently available results.
