Counting matching models…
This is a collection of parts with alternatives to build 3 christmas decoration houses, there are a set of files for each size, with alternatives for printers with large beds and a couple options for flat backed versions. I've included…
This year i've concentrated my growing efforts on RealSeed sourced seeds and they all come in the same sized packets, so i've quickly put together a little seed storage box with the ability to use dividers to split the box up into months.…
This remix takes the original model, cleans up its stlness, removes a small part of the back, adds a kickstand and most importantly - the wheels now rotate. You will need: black filament grey filament colour of your choice filament 2x…
Nothing special here, a simple wall mountable battery holder for Ryobi 4ah and 5ah batteries, presenting the display to the top for easy viewability. The model is deliberately loose and thick walled to ensure it lasts more than 5 mins in…
Similar to many commercial options, this model is a set of parts which are attached to the corner of an obstruction, be it a shed, a post or a building. The guide allows the hose to be run through it and has some play to prevent the hose…
Having tried many different empty spool based storage systems and creating a couple of varieties myself, I kept coming back to the same conclusions... I didnt want to drill new holes in the spool, i didnt want to faff with lining up…
I looked around for a 40mm blastgate design to use in a dust extraction system. I found a couple but all of them were pretty big and stuck out from the pipe a fair distance, they also required alot of hardware to make them work. I made…
I'm listing this as a remix of @thrutheframe excellent ARC for Bambu Lab P1P outer shell, it uses one of the key joining components in ARC to pull the pieces together. The purpose is to raise the lid to allow the cable and tube clearance,…
After discovering the original upload from @endik007 (thank you so much for this! I've been waiting for someone to do it for years! :D ) I tried unsuccessfully to scale it up. So I recreated the body, shoulders and head components to…
THIS MODEL HAS TOLERANCE AND PRINTING ISSUES It's been brought to my attention that the model has problems in printing and some of the parts our out of scale to fit correctly when working with printer tolerances, because of this i've…
This has 4 main components: The Chain - This is the great interlink chain model from Jack The Cup - wide side up, 1 clip for the cup to hang on The Catchment - this slots into a waterstorage tank and the chain is looped down through it…
The models are deliberately simplistic to stay in the style of the original houses . Models: Tiny Tree - undecorated Tiny tree - decorated Small tree Mid tree Large tree Snowman Lamp post Fence Item stand To Print: lay them all flat with…
Quick set of unrefined models for a window stay. The need: to allow casement windows to open to an adjustable maximum gap to stop cats falling out of windows. The solution: A hinged frame mounting point attached to the window by 3m tape…
This is a set of parts to build a presentation stand for the lightbike model. BOM: 6x m3 12mm 6x m3 nuts 1x blue El wire battery kit main filament colour white filament colour CA glue Masking tape 250mm x 100mm rectangle of 3mm acrylic…
A really simple 63mm to 63mm pipe coupler, used in a dust extraction system. Updated to increase the (in)tolorances to allow it to fit better :)
After publishing and trying it out it occured to me that the commercial ones are much much bigger to get a hose end through it. I didnt want to rescale it larger so i've made this amendment which has one side open on a hinge. To do this…
3 sets of models for a Goteki 45 inspired racer, heavily influenced by the brilliant Goteki fusion model by Swiss_Fox over on sketchfab. All of the models were recreated from scratch with the cab being more heavily influenced from the…
This is a case design for a 7" touchscreen panel and a raspberry pi 3, it also incorporates a mounting system to interface with aluminium 2020 extrusion corner brackets. ( https://www.amazon.co.uk/gp/product/B07QKT6L58 ) The design of the…
This is a set of models which house a 4 ldr sensor system common on solar trackers. This is designed to utilise the taller of the two domes from this product:…
So i built a wall PC which used many different materials and components which would normally not fit together, 3d printing to the rescue! This pack of models are all the models used to complete the build, there are a couple of models…
After a bout of nostalgia, i found the 2nd life model of the nailgun ammo packs on an image search. After some minor pixel meddling, we have this printable solid! I scaled this right down to print as i had some junk filament to use up…
I looked at multiple different cnc arduino cases and tried to remix a few of them, in the end i rebuilt the entire thing from scratch. This is simple box with detachable end panels and lid, one end panel has an opening for a 20mm cable…
Its a Quake Nailgun Ammo box and a lunchbox combined! Based on the Old Quake model and the revised updated model fans made many years later, this is a 260mm square box with a rotatable lock top, with space for a little lunch pack inside -…
Really simple set of models to allow a skadis board to be mounted to something just slightly wider than the skadis board. Print 2x of A and B for the corners, and any number of C you need. Mount bottom A+B then slot in the skadis board,…
3 simple masks for your pumpkins - make it easy to transfer the designs to the pumpkin and then outline with a pen and cut out. Resize by altering the scale on your slicer plate! Print with tree supports and 0% infill The printed images…
These files work with the ARC Enclosure and utilise an additional Fan / Filter extractor model. I've created a set of files which link to the existing ARC fixings and the Extractor to allow 2x 120mm pc fans, hepa filter and activated…
I wanted a kitchen roll holder that could take a bit of punishement as it'd be living in a workshop. It needed to be vertically mounted and secured as its going to attach to the back of a door. This model has a slide part which utilises…
This was my very first model ever published, uploaded to thingiverse about 5 months after getting my prusa mini back in 2020. i didnt think it worth really importing over to printables as it was so primitive, however as someone has…
This simple adapter piece fits within the Katsu / Makita trim router plunge base, and allows you to install templating collars, I've used this with a 18mm templating collar. You may need to slightly sand the edges as its pretty snug…
using the remixed original file i removed a row of nozzle holders, added a whole bunch of curves, chopped bits out, added sheet runners, moved / recreated the hex key slots to the front I dunno what style it is, it looks a bit like an old…
Having printed and installed the parts from Athlon to get both the E3d Revo Micro and Sherpa Mini direct drive installed on my Mini, I found 2 problems: 1: The sherpa filament entry point was loose on capricorn bowden tube (was fine with…
print in a contrast colour to your pill bullet caps, glue on with ca glue
Tiny change! Working from the original I've sliced off the bottom ribs and added a tiny chunk to the mounting point to make up the difference on the ARC Enclosure fitting on a P1P. Included here is the shim i also printed - for those who…
this is the 2nd ever model i upload3d, originally to thingiverse. I shortened the barrel to allow the print to fit on a Prusa Mini bed capacity. Print Settings Rafts: Yes Supports: Yes Infill: 15 Filament: amazon pla Notes: printed with a…
This is a collection of growing parts i've created to fit in with my woodworking dust extraction system based on standard diameter 63mm pipe parts. Parts provided are: 63mm pipe to 58mm shopvac hose 63mm coupler 63mm wall thru plate large…
Here we have single model, a modular seed pot. The pots are roughly 50mm square and have a good sized hole on the base for drainage, the pots lock together and can be moved as one.
Some minor modifications to the original model: Squared off the wormdrive housing to enable higher tolorence variance in the wormdrive print Small cutouts on the wormdrive housing for bearings (2x Deep Groove Ball Bearings 6700ZZ…
A remix shortening the length to fit a Netgear GS305 5 port switch. I also hacked off the bottom curve to allow it to print with no supports
This is a quick set of parts to knock up a 63mm blastgate which will fit standard 63mm dust extraction pipework. The body part has 2 additional mounting holes to allow you to bolt custom mounting parts to it in your workshop. You will…
I needed the phone mount to be further out so i could use the camera phone to film the desktop, 2 extensions and adapter washer later.
This is for the waveshare modbus gateway, serial to ethernet adapter. You will need a small length of din rail and a few screws, i salvaged these from the enclosure i bought which was miles too small for the waveshare to fit in :) It is…
A really quick remix to enlarge the number of battery slots and types stored. Also rebuilt the base and lid to reduce its chunkyness
Following on from the other small parts bins, this is a collection of more trays for the doublesided small parts storage . there are 5 individual models, 2 corner pieces, 2 side pieces and the back piece is used for the rest of the tray.…
The volvo ex30 and ex90 have a key card and a proximity key, but volvo would have you use the card over the proximity key despite the fact that the card comes with many drawbacks: it is a card, it has no lanyard or keyholder it is a card…
Getting back into City of Heroes to build my Invention table also opened up possibilities to recreate some of the favorite old mobs and props from the game. In this model we have the Clockwork from City of Heroes. There are many different…
A simple adaptor to connect the Makita 2012NB thickness planer extractor shroud to a 63mm flexible hose in a dust extraction system gcode reflects a PLA print, but as my mini hates PLA its a really slow config
Print with supports. Align using the center groove, clamp it to your workpiece, set your router depth (can go up to 2mm) and run it round the inside edge of the template, jobs good.
The Invention Table from City of Heroes MMO was a highly desirable achievement you could unlock after you crafted an insane amount of items on the normal static workbench. This model is a visually inspired scaled down replica from the…
I was super impressed with this plantpot model so i built this 4 spout funnel to help water them all an even amount.
Here we have a collection of models to make a foot rest, you will also need: 6x 400mm batons (12x30mm with radiused edges) 12x m4 30mm countersunk woodscrews 1kg black pla 1kg white pla 200g accent pla Printing advice: All parts were…
for easy mounting of a wago lightbox to a surface
for use in the workshop on my french cleat wall. printing: i auto aligned it and it printed on the tiny little 45 edge on the base, this got a brim and supports but worked surprisingly well. 3 walls were used for robustness
The Brief: We take many suppliments and I want a way to dump new packets of tablets into a single bin and then dispense a controlled number from the machine according to the dosage. I dont want to need to seperate them, i dont want to…
The original model is great, but i was getting a bit of sagging of the right side of the model once installed. This remix takes the shelf insert and adds a supporting backbone in the back and the backbone model. how to fit: install the…
This is a really tiny little model to provide protection to the power and volume buttons on a Pixel phone which would otherwise be pressed when using one of the camera mountable side clamps. Slot it in over the power and volume buttons…
This is slightly wider and has the bambu logo in the middle. I also moved holes, removed 2 and added 2 tabs to allow it to work as part of my other bambu P1P fan filter design ( I nabbed the bambu logo geometry from this poopbin ).…
I needed to change my desk config a bit and move the spool holder which was sticking out the side to be over the top of the unit. This is unapologetically not caring about and AMS installed, its for a spool fed p1p's. Prerequisite models:…
This model is composed of 4 parts and requires 4x m3 nuts and 4x m3 bolts of at least 20mm I chose the gopro mount bracket as it allows it to dual purpose on a gopro clamp, but also there are plenty of models out there like Skadis gopro…
After the success of my Nailgun Lunchbox, I wanted to make a practical medpack in the same style, after a long gestation period, here we have it! The medpack is based loosely round the second life model of the medpack and can be made as a…
The newer pixels camera bezel stop the old ikea charging stations from wirelessly charging them, this model replaces the ikea charging tablet with a housing for the pixelsnap charging puck and slots into the original charger base. I…
The Osram / Ledvance outdoor zigbee smart socket is designed to mount on a spike and be rammed into soil to keep it off the ground. There is no way to adapt this to be a wall mounted socket. This small wall holder solves this problem.…
Didnt take much to do these and only a couple iterations to make. Made of whatever material i had at the time, slotted into place and was retained to the ship by tiny brass 2.5mm screws. A timelapse of building the whole ship start to end…
Love your hot chocolate, mochas and chai lattes? Well you probably have either the Dualit Milk Frother or the Hotel Chocolat Velvetiser to make sure your beverage arrives in premium frothed condition! If you do like the drinks but dont…
the awesome extractor model by @byteslinger has given me the oppertunity to quickly pop together some feet, and coupled with a hepa filter model from one of my other projects i have now got a wee desktop fumagator. the feet are dead…
remodelled to avoid needing supports, print with a brim :) it is suitable for an m3 bolt or screw
I play a lot of a game called WingFighter, and I hates that I have to grip the phone at the same time as playing. This model solves the problem and provides a pressureless method to hold the phone while gaming with a stylus in the other…
Having just upgraded to Unifi, i have a bunch of the tiny little spirit level bubbles spare from all the drill templates. This model puts these to good use to build a desktop builders level, its so cute! What you will need: 3x unifi…
Here is a set of models that can be connected to a 100mm inline extractor and convert it into an air filtration unit - i use it in my woodwork shop. It requires: 1x 800mm m6 threaded rod1x m6 nylon lock nut 1x m6 penny washer 1x m6…
Charging the ev at home is great, but having to pick up and deal with a muddy cable all the time is not. This handle and holder cradle has the ev cable pass through it and has a handle on the top, far from the mud. The handle is also big…
Problem: We have a cat who is diabetic, this means we have to dose the poor chap with insulin everyday and sometimes the box the insulin bottle comes in is a bit squashed. Solution: This set of models creates a new coozy for the bottle, a…
These are all currently available results.
