Counting matching models…
Uses a snap-fit system to hold the handle firmly without the need for assembly. Versions -> Updated version with more grip: The model is available in multiple sizes to fit different handle diameters: Ø25 mm Ø30 mm Ø35 mm Function The snap…
needed a riser for the lid to the enclosure as I grew tired of comsntantlty taking it off and putting it back on. this minimises drafts whilst maximising air flow. even with the wobble it doesnt fall off and you can move it side to side…
This little gizmo holds a miniature pushbutton switch (see photos) and has magnets on the bottom to enable it to be held firmly on steel/iron metal surfaces. The pushbutton switch used is designed to be panel mounted in a 1/4" (7mm) hole.…
Just the bolts not the actual box for the camera.
Ich habe den Vorreiber für mein Tomatengewächshaus konstruiert. Weil mein Anschraubpunkt in einer Nut liegt muss ich eine Scheibe unterlegen. Für alle die den Vorreiber eben anschrauben wollen hab ich eine gekürzte Achse dazu gepackt.
needed a riser for the lid to the enclosure as I grew tired of comsntantlty taking it off and putting it back on. this minimises drafts whilst maximising air flow. even with the wobble it doesnt fall off and you can move it side to side…
FR Avec une laser CO² on utilise souvent des contrôleurs Ruida. Vous trouverez ici 2 modèles, un à poser et à fixer avec du scotch double face, l'autre sur un axe ventouse et tête magnétique. https://amzn.to/4ejhZuS Les 2 boitiers…
This button design allows for a clean looking electronics project. The intention would be that there would be a tactile switch on a PCB located directly behind the actuator. The button is constrained so that it mostly translates up and…
This is a mount I designed to house a replacement speed controller module that I used to replace the OEM control board on my Harbor Freight 7x10" mini lathe. The OEM boards have a tendency to burn out really easily when under load, so…
designed a black powder nipple wrench for the TC thunderhawk and similar muzzleloaders. It is a bit tight in PLA. I printed at 104% and it fit well. I used 5 layers all around and printed horizontally with support on plate only
Drill dust vacuum collector with osVAC M32 connector. osVAC_DustCollector_v2 with increased size and smaller hole, sticks better on the wall.
A very fast and easy to print desktop stand for your hex keys. The design goal was to make it as simple as possible. I ended up with only two different parts. Print every part 2 times and you end up with a total of 4 parts. Depending on…
All possible M6 washers. If you download the stl you can make them even taller.
All possible M8 washers. If you download the stl you can make them even taller.
When printed on MK4, tolerances are little tight (which is fine, at least it won't fall), but if you have less dimensionally acurate printer, maybe slightly increase the size in the slicer. Happy printing 😊.
Flush Hinge. The fixed and rotating part starts on the same face. Hoel diamters 3 mm.
Amazon shipped a small water pump for a fountain with no nozzle to connect the hose to, printed this one to replace it, maybe you need a replacement too. Should work with any pump that has a 13mm inner diamater outlet to connect to an 8mm…
4 cylinder print in place hand crank engine Frame of the engine is: 73.5 mm/2.9" long 51 mm/2.0" high 12mm/0.5" thick Material used at 15%, 2 wall outline: 33.07 g/1.2 oz 10,999mm/433 in There are small parts so bed adhesion is critical…
Prodloužení nožiček. Vnitřní průměr 14 mm, vnější průměr 20 mm, celková výška 38 mm, výška plné části (o kolik se prodlouží původní nožičky) 22 mm. Na obrázku je vlevo původní nožička zasunutá v prodloužení.
Testing an idea of a 3D printed spherical gear joint (look at the OpenSCAD files for further details). Backlash is an issue. Need some more work in order to be useful for a mechanical robot arm, but that's a start. Check the video to see…
This is a custom replacement axle designed for the Tuttobimbo Italian vintage toy train.. If your original axle broke off, this 3D-printed part serves as the replacement to restore your classic toy. Features: Compatibility : Specifically…
Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
These brackets are designed to attach sections of EMT (electrical conduit) together for an outdoor project. The OnShape source at…
3D Model Description: CNC Milling and Drilling Tool Holder This 3D model is a meticulously designed tool holder specifically engineered for CNC workshops, optimized for storing and organizing milling bits and drill bits. The model…
A simple yet working 3D printed bearing, works just fine and can be used for any purpose. Printed with 0.4 mm nozzle. Printing & post-processing Print in highest possible resolution. Minimalize the stringing. Use any lubricant to…
I wanted some wider feet for the adjustable legs on the DMC Mini Mill. Suggest printing them in TPU (60D) 6 Walls, 4 Top/Bottom Layers 25% (3d honeycomb) infill
Replacement gear for a Kenmore 158 series Hook Drive Gear. Traditionally made with nylon they can crack over time. My sew machine is model 158.18800. Make sure the mark the orientation of the needle and the bobbin holder. I had to…
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
GADGET FOR HOLDING AND FASTENING 28BYJ-48 STEPPER MOTOR FOR YOUR PROJECTS
For my exhaust air heat pump, I have several external wall air diffusers, so-called ALDs, in the shutter box. I designed this component to improve the sound insulation here. A “first element” and several “middle elements” are required.…
I created a model of this handle to replace a broken handle in my toolbox. You need 2x ϕ3mm pins to assembly it.
Introduction I built this system out of technical curiosity due to all commercial available units are for one very pricy and for my knowledge all use 230V AC to feed the single units wich means that every unit has an internal voltage…
I designed a number of connectors with to make decorative fencing, railings and ladders etc. for use with the fischertechnik construction system from 6 mm hose. I'm pretty sure there are many other applications for your own projects. Some…
PUT M8 x 1.25 LONG (28mm or 1.1") HEX NUT AND GLUE SPACER TO THE BOTTOM SLOWLY, HIGH TEMPRATURE.
Print two the same parts and assembly with the bearing and 4xM4 nuts Material PET-G layer: 0,25mm
Rectangular interface from knob to vent is little bit conic shape in the knob. 3D model attached as well to fit your needs. for my application the rectangular interface is a bit too loose and I used 1 layer of tape to fit my needs. As…
I have a drawer on my arcade and I was looking for a solution to add a button
This is a part for when you remove your bike wheel to put your chain on.
Ein Lasersymbol zum anbringen an der Maschine , ich drucke es mit PETG Schwarz und beschrifte die erhöhten Bereiche mit weißem Lackstift. Skaliert es bis Ihr die gewünschte größe erreicht habt !Die Beschriftung “ Laser ” habe ich im…
Use ABS - 30% infill On my old unclosed Ender 3 ive use no supports, 249º on the nozzle, and 65º on the bed, speed 80% - Speed 50% for better detail
This is the 45x12 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x23 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x45 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
------------------------------------------------Deutsch------------------------------------------------- Dieser Konstruktionsteil dient als nicht sicherheitszertifizierter Ersatz für den Haltegriff 0 00 341 30 41 eines Kramer 312 und…
Durable and easy-to-print sliders designed to fit 30 x 30 mm aluminum extrusions. Perfect for smooth, adjustable movement in DIY projects or custom setups. Print with supports, ensuring a quick and hassle-free build for makers of all…
The mount is designed, to use a heated insert like this one https://www.amazon.de/dp/B09MTS6ZZQ The size is 1/4“-20x12.7 but anything shorter should work just fine.
Enables you to mount your Steelseries Arctis Nova Pro DAC to your Aluminium profile simrig. The mount also has a place to store your spare battery.
Yo la imprimo en PETG. LME12UU diametro externo de este rodamiento es 22 mm, hay que tener en cuenta que le LM12UU, tiene un diametro externo de 21mm
Pipe Clamps – Easy, Reliable, and Versatile! Designed for3D printers, these clamps are perfect for securing pipes with ease. Key Features: Single Clamps : Fit pipes from 10 to 75 mm. Double: Fit pipes from 15 to 40 mm. Triple Clamps : Fit…
500mm x 500mm Laser Cutter V-Slot Wheels and GT2 belts, 20T/5mm Gear,M3,M4,M5 Nuts & Bolts My Parts List; LASER TREE Laser Module, 10W(10000mW) Optical Power Output Laser Engraving Module with Air Assist, Built-in FAC, Double Ultra-Fine…
Modeled after original best to print in PETG for that flex much easier to install i printed it on side with brim supports needed.
This is a set of parts you need to complete the Lenco Wheel V6 build. Please not that this was designed to work in combination with laser cut aluminum parts (instead of billet CNC to reduce cost). The front box is designed to fit a 250a…
Perfectly well screwing nut and bold. For strength print with 100% infill. Can be used for my underdesk quick mount .
Keep your 8" Kurt vise chip free with this easy attachment. Bolt on the attachment plate with a 5/8 nut in the back, then chose the deflector spacers that are the right size for the job and your faceplate. Secure them in place with a…
Originally designed for the Makita LS1110F mitre saw and the Parkside PWD vacuum cleaner. Compatibility with other models is possible. Highly durable, simple design. Printing from PETG - perimeters only. Navrženo pro pokosovu pilu Makita…
a solution for keeping the magnet portion of a bike's brake sensor on the lever. adhesives not working? just set it in. Aditional material: a single M3 screw, nut, and some CA glue to keep the magnet to the holder in case of bumpy rides.
This model lets you easily incorporate a rotary encoder into your Lego Tecnics mechanical designs. The gear is a press fit onto the encoder shaft and the shaft is centered on a Technics pin location for easy meshing. Designed to fit…
The inner diameter is 8mm and has a depth of 6mm.
This is a simple pointer that fits nicely onto a technics axle. I use it with a gear reduction and limit switch to test automation projects.
Im not asking why you want to power a v-belt with your drill motor, but here is a fast print that only needs a 5/16 bolt and nut to make it happen. Good luck with whatever your trying to do! I used tree supports and printed it flat on the…
Ich suchte eine passende Rohrschelle um meinen Küchenabfluss zu fixieren. Dieser war nur am Spülenabfluss und am Wandflansch gesichert. Durch das Abpumpen des Geschirrspülers hat sich das Abflussrohr über die Zeit gelöst. Dies kann…
Upper and lower fan wheel part separated, so printing won't warp the total, glue together to form one part
Use case and features Use this angle bevel whenever you need to transfer an existing, unknown angle to a new working piece. It is ideal for laying tiles in a room with non-90° angles, doing woodwork or making any strangle formed pieces…
I needed some M6 thumbscrews and didn't like any of the existing designs so I created my own. It covers the top of a hexagonal M6 screw turning it into a thumb screw. Consists of 2 parts - the main body and a cover that is friction-fit at…
I printed this model from simple PLA, it does not require any support. It was sliced with a layer thickness of 0.2.
Keycap for Razer Ornata V3. Print in 0,1mm, organic supports, 45° for stronger print.
This box was made for calibers, as well as for dies and similar items Don't forget to scale the model to your needs in the slicer, and don't forget about tolerances :)
This is a cap for a 30x30mm extrusion (1.25"x1.25") that can be bolted to a perpendicular extrusion so it hangs.
Крыльчатка для компрессора. Наружный диаметр 135 мм. Посадочное отверстие 14 мм.
Since the RinseKit Pod is an older discontinued model, I thought it would be worthwhile sharing an end cap in case someone were to lose or break their original. This does require you to use the O-ring that comes with it. From a quick…
I designed a wall mount with separable base for a cheap air purifier I bought from amazon. In addition to a wall mount piece (air_purifier_wall_mount.stl) and a plate that sits on top (air_purifier_base_with_hex_holes.stl), I also provide…
Wenn die original Schranksicherung zu kurz ist, z.B. wegen Fußleisten an der Wand, dann kann man sich hiermit behelfen. Man sollte beachten, dass es hier um Plastik sich handelt und nicht um einen Metallwinkel, wie er sonst mit dabei ist…
With this gearbox, it will be very easy to make your own RC vehicle with a small mortor. The print has been tested and works 100%. If your print quality is good, you can mount and use it directly, if not, some sanding may be required. I…
Simple holder / distances for plywood or similar 3-6mm thick, adds 6mm of space to the honeycomb. I have added 17.5x5.5 magnets at the bottom to fix the object at the desired place. There is also a wider version with 2 magnets at the…
The corners of the aluminium extrusion profile of my Hammer table extension are rounded but still sharp enough to hurt if you bump against it. To cover them up, you can use this cap.
Overview: Pole mount system with slide-in locking mechanism for Mammotion LUBA RTK reference station. ASA highly recommended Use M12 hexagon screw to secure pole from below (optional) Use appropriate countersunk screws to attach bases on…
This is a 0.8 MOD gear 114T for Sharpstar Askar SQA55 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 57T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Current Version: 2.3 Tested and currently in use by me on my 24s2p build pictured. BTG WTF rails, 11.5x7 Burris, VOW's V2 battery box. NOTE: THIS BOX REQUIRES A MODIFIED FRONT BANG BUMPER FOR FITMENT . This dual-lid controller box is…
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
DE: Fadenbuchse für eine Stickmaschine vom Typ Melco EMT16 und Melco EMT16 Plus. Gedruckt mit 0.15mm Schichthöhe, PLA und PETG funktioniert gleichermaßen. In aufrechter Position drucken mit Stützen auf dem Druckbett. EN: Thread bushing…
About the model: A simple 608 size bearing replacement for when you can't be bothered to order the real thing for your simple little 3D print and would rather just print the bearings too (we've all been there right?). They spin very…
Adapter to go between the Onefinity Suck It's 2.5" hose inlet to the outlet on the Hercules dust extractor vacuum. Print settings on BBL A1 0.4mm nozzle using BBL PLA Basic 4 walls 3 top and bottom layers 0.28mm layers No support needed
The design makes use of the 4 x 9mm pins for alignment. The pin holes are modeled with a very tight fit (0.05mm clearance), adjust as necessary. The center hole needs to be precision threaded M14x1.00. Any deviation off centre will render…
I built a little free pantry which has an acrylic window in the front. I could have bothered to use a router or something to embed the window into the frame, but I am lazy, so I just mounted it flat to the back, and didn't want to have to…
I do NOT recommend using this in a computer or around electronics that have not been waterproofed. I am not responsible for any damage that occurs due to leaks or whatever else. User assumes all risk. Test thoroughly before use. Print hot…
MUST BE PRINTED IN ASA OR ABS! I have tried PETG and it is simply not strong enough, must be ASA or ABS In order to mount this you need to use a M3 heatset insert (ex. from Ruthex), then it can be used in place of a normal nut. The valve…
