1,341 models
I really like the design of the magnetic PFTE couplers and I wanted to use it for a drybox. However I don't have MMU, only one tube is used at a time. So I designed a terminator to dock the tubes when not in use. To be used with M4 screws…
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Use PA (nylon), PC or some other temperature-resistant filament. Do not use PLA, or carbon-infused filament, as it is likely to heat up because of its conductivity. Printed at 0.20m QUALITY settings with 40% infill.
I redesigned my 40° coupler from the ground up! The Fusion360 design is now more parametric, so if you want to mess with the angle, get the source here! https://a360.co/2BwCLdH It's also shorter, and has a smaller footprint in general. It…
This pass-through is designed for filament dryers or dry boxes. It consists of a threaded connector combined with a magnetic interface. The threaded connector requires a 0.5” (13mm) hole in the box, and is secured by a nut screwed on from…
To be used between CoreOne and your drybox. Easy to install, easy to use. Just few grams of filament and few minutes to print. Instal with bigger chamfer towards the printer. Check internal opening for smooth filament movement in and out…
After I added the 3D Chameleon to my K1 Max the PTFE tubes kept falling out of the stock tube clips. I designed this addon to simply snap on a PC4-M10 coupler. Now the tubes stay put. This adapter can be used on the extruder and/or the…
This part mates two pieces of shop vac tubing. I think it's 60mm tubing? Anyway I cut mine with the table saw by accident and wanted something simple to fix it. There's lots of models with magnets, snaps, threads, etc. This is much…
The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…
Use this to connect your ShopVac to a PVC coupler so you can easily mount a cart to help with woodshop dust collection. This is an adapter to connect a shopvac (ridgid, dewalt, craftsman etc) to a PVC coupler. Use with oneirda dusty…
Use double sided tape to secure them to your monitors. It's a universal design, works well for any size of monitors. There is an angle (160°) between the monitors for confort of use.
There were 2 genius ideas I was inspired by. 1 was this by @linearcline the other was https://www.printables.com/model/695848-ptfe-joiner-for-8x3-magnets-and-pc4-m10 I disliked having to have different poles for different connectors so I…
EN: Adapter is used to connect the Quick Coupling of the Garden System G.F. BIG s.r.l. (Italy) to the standard 1-inch thread of the Garden Pump. I used Teflon tape to seal the thread and a 22.5 x 2.5 mm rubber O-ring for the quick…
Se requiere un tornillo de 1 mm, similar al utilizado en reparación de lentes.
This is the core of a variometer (also called a vario coupler) used in radios from crystal type to the early vacuum tube radios. I strongly recommend using a filament with no pigment, as many pigments interfere with RF signals. Print…
Hadicová redukcia resp. spojka pre zahradnú 1" hadicu (vnutorný priemer 25mm) a bazenovu hadicu s vnutorným priemerom 38mm. Doporučujem tlačiť aspoň so sklonom 45 stupňov alebo na ležato. Je to lepšie pre celkovú pevnosť modelu. Ak sa ti…
This coupler connects the inner diameter of a 100mm vent pipe making a tight friction fit. The other side connects a vent cover from the outer wall. The outer part allows some flexibility of the commercial cover so it can be screwed into…
I've created a magnetic connector and coupler to simplify speaker wiring. Printing: The plug is designed in two parts (split in PrusaSlicer) Easy2Print, 0,2mm PETG without supports Coupler Easy2Print 0,2mm PETG with supports from base…
Motivation I recently created MagDuct - a Parametric Magnetic Ducting Quick Connect System. In the process, I realized some people may need or prefer non-magnetic adapters and couplers or they simply need additional or replacement duct…
An example 3D printing can be useful also for mechanical parts manufacturing. Maybe someone find this model useful. My original coupler of Grain mill Bosch MUZ5GM1 has broken. It is made of some plastic material. So I decided to design a…
This is a very simple coupling clip that can fasten two MatterHackers 1KG spools together. Installing these are difficult due to the small spaces involved and the sharp unfinished spool's inner walls. So do take care. Caveat: Due to…
I wanted a non-destructive way to attach two MatterHackers 1KG spool together after finding inconsistencies with the inner structure of various spent spools I've accumulated over the years. I want to be clear, this is ridiculous for the…
The same model as the original, but with a 5x2mm version instead. My modifications were all done in Prusaslicer. The 3mf file contains all my (nonsense) changes with cylinders and negative cylinders, as I don't know CAD. If it's stupid…
Coupler designed for an above-ground graywater drainage line. We have a tree and a few other things we like to indirectly water and this makes it possible to use cheaper PVC to make up the majority of the length. Best printed in ASA, but…
Round 15mm x 2mm Magnet - Prusa Core One Top Filament Guide with Bowden Coupler I modified the original model by bullitt168 to fit the magnets I had on hand which measure to 14.95mm x 1.75mm Print Settings 0.2mm layer height 3 perimeters…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
AutoCoupler Cutaway educational model of an automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Original Auto Coupler Check out the Dragon Railway ecosystem! Join our : Discord If…
This is a very simple coupler for joining 4mm ptfe tubes using PC4-M10 pneumatic couplers. I use these to quick connect tubes from my repbox straight to my printer or MMU2S. Category: 3D Printer Accessories
Simple garden hose quick release coupler. The O-Ring can also be found in my other models.
It's not a precise nor detailed model. It has simply 4 parts to show you the basic principle of a Janney coupler. Print in the position I posted. It's basically support-free if you print it small. Will need to add some support with the…
NOTE: garden hose connections require a rubber washer to seal, unlike plumbing threads, the thread is not designed to make a seal. The GHT “standard” is weird, here's where I got help getting it into fusion360.…
Build Mod Hack 5mm to 8mm Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 25mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws: 2 - 3mm x…
AutoCoupler - Dragon Railway 1/64 Scale Automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Assembly Manual: Google docs Hardware required: M2 4mm screw per each coupler Used by:…
Summary Slim RJ45 Ethernet Cap / Coupler that will save your ethernet cables and especially the plastic retaining tabs on your ethernet cables in bags cluttered with other cables. There is one open ended file to customize to your…
Remix of original Duplo/Brio Car from timqui - train wagons compatible with Lego Duplo bricks and can run on all basic wooden (Brio) tracks. In the original model, I missed the possibility to connect wagons to each other - so I decided to…
Sometimes you will lose or break a connector in your window blind chain. This simple project will fix it so you can enjoy a working blind chain again. It is designed for chains made of balls with diameter of 3,0-3,5mm.
I needed a simple nut for the PC4-M10 PTFE coupling when making a drybox. Nothing fancy, created in OpenSCAD with “Nuts and Bolts v1.9.6 OpenSCAD library” by biomushroom that you can find here: https://www.thingiverse.com/thing:965737…
Easy, quick printed way to help your Bowden couplers stay tight and strong. Print without supports, as oriented, using your slicer's finest “super quality” setting. Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and…
According to Prusa support, adding a little grease to the couplers on the XL Nextruder will help with the tool changer and also reduce the chance of layer shift and banding. The file was not made by me but by Prusa, but they don't have it…
After a few tries, we finally got it! A lil screw converter for toothpaste tubes. Don't print with supports. Update 3.16.23: I was informed by u/MillennialGeezer on reddit here that this design only works with Crest, that it needs to be…
Standard gardena / garden hose Y coupler. The required O-Ring can also be found with my other models. Happy watering :)
Standard gardena / garden hose T coupler. The required O-Ring can also be found with my other models. Happy watering :)
This is a bowden/PTFE tube coupler that fits an ECAS04 on each end. I've printed mine with PETG, but it should also work fine with other filaments like PLA, ABS or even TPU. I'd recommend cutting a chamfer inside each bowden/PTFE tubes…
Print with 30% infill, 0.1 layer height, 4 walls and 8 top layers. Sand mating surfaces of the middle part with 80 and then 200 grit. The top and bottom parts should print smooth enough to make sanding unnecessary. They should be able to…
Full set of couplers to add an additional lack table to the original lack enclosure. Print instructions Printer Brand: Prusa Printer: I3 MK3S Infill: 15% Filament: Prusa PETG
Working progress, will do some prints to bring it as low as possible. Remixed the Hochul Magazine Extensions File by @nnicclaascoupler to make the coupler, he did a great job, so the connection fits perfectly. Beware, if you connect two…
v2.0: Updated to be more like the design I did for the Polydryer. The updated design includes a 3d printed nut for stronger attachment. I noticed after a while the 1.0 version in PLA would get loose when heating ABS and ASA. It's…
This model has only been tested with the flat Sunlu resin bottles as displayed in the included photos. Hope you find it useful and please upload your makes! :D No Supports should be needed when printing in the tip up orientation. No…
Replaces the rotating coupler with a fixed one - if you intend to mount you spool holder on the side of the printer, you might be printing the Side Filament Guide Arm for P1P instead BOM 2 x original screws for PTFE coupler 2 x PC4-M10…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…
AutoCoupler - Dragon Railway 1/64 Scale Automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Assembly Manual: Google docs Hardware required: M2 4mm screw per each coupler Used by:…
When cleaning out a clog I accidentally broke the coupler that attaches the bowden tube to the extruder on the Ender 3 Max, so I modelled a new one. After 3–4 iterations it came out pretty good. Insert the coupler into the extruder and…
Magnetic twist-lock connection for PTFE/bowden tubes. Parts 2 x 6x3mm magnets 2 x ECAS Connectors 2 x Printed parts (ecas magnetic coupler) Assembly All items are press fit, but might require tuning Magnets should be inserted in opposite…
Simple PTFE coupler. Print vertically, to ensure hole is round.
I created a coupler in Open SCAD that uses a PC4-M10 fitting with a seat at the end of the coupler for a reverse bowden tube to rest on to prevent the tube from moving further in. The design is threaded for a matching nut that is also…
I wanted to be able to quickly disconnect all the filament feeds to my MMU2 unit. I decided to use these quick release parts from the PTFE tubing I recently purchased and created a coupler to pair them up. It gave me a chance to learn how…
This adapter is used to join two PET bottles together to form a water tornado. Fill one bottle with water and then use the adapter to join the bottles. Flip the bottles over like an hourglass and give the top bottle a bit of a shake in a…
A splitter for garden hoses. The required O-Ring can also be found with my other models. Happy watering :)
The centauri carbon has a chamber thermistor that is mounted to the frame with a steel screw and plastic spacer. The steel screw is thermally conductive enough to significantly skew chamber temperatures colder. I found that the built in…
Remixed from dual version: https://www.thingiverse.com/thing:4273415 IG post: https://www.instagram.com/p/CHvzaRlB7cl/
This is my holiday gift to the most awesome online community there is! I was about to give a friend of mine an old hitch cover that was shaped like a small Railroad Knuckle coupler, when I realized I could probably make a much more…
Printable MMU3 Coupler A printable alternative to the original metal coupler. Works finde for me, you need: 4 x M3x10 screws 1 x M3x6 screw 1 x M3nS nut Print instructions Simple print No support needed PETG on 0.2mm , 100% Infill and 6…
These Models are for Ethernet Outlet Plates or Covers for one, two or four Keystone Ethernet Couplers or Jacks. I've included models for both a standard sized Outlet Plate and an enlarged or XL Outlet Plate. I recommend printing with 4 or…
This models allows you to mount a PC4‑M10 PTFE coupler above your Sherpa Mini (which is a bit loose normally) which fixes the bowden tube in place above your extruder. The PC4‑M10 coupler must be M10x1 threaded to match the threads in the…
This is a coupler for joining two soda bottles to make a tornado (reference: https://www.wikihow.com/Make-a-Tornado-in-a-Bottle). There are three models: Coupler, short—use this on its own, and tighten the two bottles to each other.…
This is a modified version of iwagner's Prusa MMU2S Rear PTFE Holder. For the original model and instructions, visit their Thingiverse post . Like many MMU2S owners, I had a few issues with the PTFE tube setup - in particular, their…
I love the Polymaker PolyDryer boxes, but I wanted a way to securely connect the 4mm PTFE tube to the box, so I made this model. The adapter is chamfered on the inside to gently guide the filament to the coupler. It can be installed on…
This coupler is 20mm in diameter on the flat surface that screws into the object being acted on and 5.8mm diameter for the shaft insert hole. Meaning your shaft should be less than 5.8mm in diameter.
Update 6/21/2019: Added v2 of both versions. Updated the original mount as I had made the 90 degree mounting hole in the wrong position. I have printed the original version and everything works great. Threads were perfect too. Also added…
When you have enough bricks around to build lego trains attachment car, but no spare couplers, buffers and wheels - and all stores are actualy closed due to holiday season :-)… Print settings Modelled according to actual lego pieces and…
This is a complete set of washers for PTFE tubes for the Snapmaker dryer and U1 printer. There are 8 washers, 4 of which are threaded, allowing you to use the original filament feeder housing from the Snapmaker U1 printer and attach a…
Designed a simple pipe coupler that uses 6x3mm magnets it has 8 magnet holes, allowing to place magnets however you like, the magnet hole has enough room to fit the head of an M3 bolt, so you can also screw couplers together or screw them…
Build Mod Hack 5mm to 8mm Tall Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 37.5mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws 3 -…
Gardena Male coupler standard 3/4 BSP
Actually, I came here to just quickly search and download something similar to connect some LED lights, but to my surprise I found this Wago contest and decided to create my own 😁 You need 4x M3x10 screws + nuts to secure the strain…
Description This is a remix of ritchiedc's CORE One INDX Filament Sensor Top with PTFE Couplers , which itself is based on GavinOracle's original filament sensor top for feeding filament from a dry box. I added number markings on the 3D…
A X splitter for garden hoses. I did not print this one yet since I have no need for it but had fun in modeling. Feel free to add pictures and print profiles. The required O-Ring can also be found with my other models. Happy watering :)
This model is meant to be used as an asset in CAD software but as it has a very simple geometry it can be printed too. I added an STL file for those who want to print it. My ultimate goal with this CAD model series is to release at some…
This is a replacement coupling hook&spring for Playmobil wagons. Printed in ABS the spring is stiffer than the original Playmobil piece, but that also means the wagons are less likely to accidently uncouple. The uncouple-lever was left…
This fits Vac hoses that are roughly 48mm OD, Sold in the US as 1.5" hose. Tapered on both sides for a snug fit. If you needed to make your CNC easily removable, this is how you can make that happen. Included a step file for easy editing.
A L coupler for garden hoses, if cou have some tight corners or something. The required O-Ring can also be found with my other models. Happy watering :)
Set of clips for E3D collet / coupler from 1.0 to 2.0 mm with 0.2 mm step. Print settings: material: PETG layer height: 0.2 line width: 0.45 print speed: < 20 mm/s cooling 50-100% Check out my other designs:…
The PTFE coupler uses two ECAS04 connectors to extend the tubing. The arrows on the model point the direction of flow of filament.
My Kenwood HB720 coupler was torn appart. So I designed a new one like the orginal part. The hole that is plugged onto the shaft is a bit tight. I needed to hammer it in with slight blows, but it seems to withstand the forces that come up…
Remix of another bowden coupler that I had some issues with. This retains the same coupler but splits the nuts into separate print files (print two of them - both ends use the same nut) and adjusted the nut to be easier to print (at least…
This allows you to fasten a 3" flexible duct to the QiDi Q2 exhaust port. The original model that I remixed this from (thanks Weav ) was very good but I had already designed other duct work that had a lip at the end of the tube to “catch”…
Magnetic filament coupler with ring magnets to get a easy access to the filament or detach the spool-part from the printer. The goal was: keep it simple and easy. 4 mm ptfe tube fits snuck into de hole of the magnet. The petg cap gives…
Helical flexible couplers are just crying out to be 3D printed. But to avoid steep overhangs with a standard coupling design, you need a really high helix angle, which makes it fairly stiff in bending (bad) and not-so-stiff in torsion…
HO Coupler height gauge block. Coupler is 9.9mm (NMRA standard) off top of rail. Has a hole in the back for weights. Weights used was 2x 8-8 (3/8-16) hex nuts. Screw in top is 3mm (7/64"). Update 2020-12-24: Moved screw hole closer to…
Use to attach a 3 inch vent hose to the exhaust port on the Qidi Q2. You will need to stretch over the coupler as this is a bit larger than 3 inches but provides a snug fit to the hose. Printed in PETG. I used m3x8 self-tapping screws.
Im setting up my MMU and didnt have a long enough ptfe tube. So I quickly designed/printed this in a pinch. Its friction fit and it worked for me. This is my first post. I know it's just a tube, but I couldn't find another one online that…
A quick remix of the stock MMU2 Selector Plate and the tapered thread PTFE coupler from https://www.thingiverse.com/thing:1993384 I mashed these parts together as I was getting a bit tired of the stock festo coupling cutting into my PTFE…
Designed some 3D printed Oldham Couplers for my Ender 5 Plus. The ones available didn't match up with the bolt pattern on the 5 Plus' lead screws. Suggest Printing at 100% infill with 0.12 layer height and 4 walls. Uses M3x8mm to attach…
I modded the leg connectors from the Prusa printer enclosure parts to stack an additional table on the bottom without walls. Makes a nice stable table stacking coupler for other purposes as well. I attach them with #10 x 3/4" wood screws…
Overview: This customizer can generate a shaft coupler that accepts a shaft (female) or acts as one (male) on either end for a variety of shaft shapes (hex, square, round (with set screws), and round with one or two flats). "Sleeve" mode:…
Before the original creator made an update to the boat with a coupler I created one myself based on the 4 + 4 pins boat. Just didn't take the time to upload it.
Mod for the amazing pico MMU from LH exchanged the ecas to ptfe couplers
Remix of ikea-lack-table-stack-coupler-model_files Holes and corner fittings added
![New Angled Coupler for PTFE Tubing [PC4-M10]](https://media.printables.com/media/prints/37394/images/369595_474b669c-2177-4d92-bb73-0382863ed5f2/img_3225.jpg)
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
![[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE](https://media.printables.com/media/prints/1137278/images/8582109_08a5091e-d6fd-4b16-aede-06f1f3f273cc_a863e0eb-efc0-4315-8953-1c3240258fd2/2025-01-06-ad5m-bowden-ptfe-coupler-c-clip-option-2-of-3-printables-thumbnail.jpg)
