Search results: drye

Sort order

Counting matching models…

P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,407
Likes
360
Rating
4.89
P
PrintablesParasitKegel

Polydryer Filament Holding Drybox Plug

Plug for securely holding the end of the filament spool when sealing the Polymaker Polydryer box opening. The plug does not protrude above the top edge when installed in the lid. Compatible with 1.75mm filament. The hole in the plug end…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
892
Likes
215
Rating
4.93
P
PrintablesDarkmoon

Sunlu S2 Filament Dryer PTFE Tube

Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
875
Likes
138
Rating
4.96
P
PrintablesStefan Pasch

Bottle Dryer

A simple bottle dryer to plug together and save space in the closet. Based on the v2 design of https://www.printables.com/model/382554-bottle-dryer-system-v2 - only slightly higher with wider feet, so that even larger bottles (including…

Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant

Downloads
692
Likes
185
Rating
5
P
PrintablesSteff's Ideas

Car Vent Glove Dryer - V2

Perfect winter accessory for your car. You know that feeling when you've just cleaned your car from ice and snow and your gloves are soaking wet. That was exactly the case of my mother. I've designed this accessory to solve this problem…

Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant

Downloads
627
Likes
425
Rating
5
P
PrintablesStanley

Auto-Rewind Spool Holder for the Polydryer Box

Auto-Rewind Spool Holder for the Polydryer Box Axis and 75mm spool holder for the integrated Auto-Rewind Spool Holder by Vincent Groenhuis. I replaced my MMU3 buffer with these auto-rewinding spool holders.…

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
478
Likes
159
Rating
5
P
Printablespfelecan

Tray System for drying Silica Gel in a Creality Space Pi Filament Dryer or a Creality Filament Dry Box 2.0

The generic purpose of this tray system is to regenerate silica gel with indicator, after losing its absorption capacity, in a Creality Space Pi Filament Dryer or in a Creality Filament Dry Box 2.0 (this was suggested and modified by…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
354
Likes
77
Rating
4.67
P
PrintablesmoWerk

Adapter for Creality Dry Box 2.0 (250g Spools) filament dryer

Adapter for 250g Spools: Sunlu, Jayo, Tinmorry, Eryone Designed for 250g spools from Sunlu, Jayo (plastic), Tinmorry, and Eryone (cardboard). Sunlu and Jayo share plastic spools, Tinmorry and Eryone share cardboard ones. Remixed from…

Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
352
Likes
70
Rating
5
P
Printableselectrodraco

PTFE tube connector for PolyDryer drybox

This connector fits into the opening of the Polymaker PolyDryer dryboxes and attaches to the smaller 4mm PTFE tubes. This is useful for boxes that are equipped with an auto-rewinder spool and ensures the tubes are not pulled inside (this…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
339
Likes
61
Rating
4.83
P
PrintablesNeva

Shoe dryer (no supports needed)

no supports needed, just use some brim

Print approx. €4.61–€5.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
260
Likes
100
Rating
5
P
PrintablesJOGIAREA

Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silika / humidity + temperature Sunlu JAYO dryer S1 + silica

Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen) Benötigt wird eine M6 Mutter + M6…

Downloads
242
Likes
53
Rating
4.8
P
PrintablesMLS

Small Spool Adapter for Sunlu S1 Filadryer / Adapter für kleine 250g Spulen im Sunlu S1 Filament-Trockner

Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…

Print approx. €8.77–€10.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
235
Likes
45
Rating
5
P
PrintablesAWSW

Seed Dryer 50x50mm with 5 trays for 40x20mm fans

Small seed dryer I made for a friend who grows a lot of chilis with super tiny seeds with about 1mm in diameter. Features: It contains 5 trays with the size of 45x45x10mm. The trays fit tight with a 0.3mm gap into the tray holder. The fan…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
206
Likes
60
Rating
5
P
Printableswenjuk

Miele dryer or washing machine Door open holder/ spacer for W1 or T1

Distance holder for Miele's dryer or washing machine to keep the door open for a long time without the door being open or approaching further and the machine being able to dry out. Print instructions Sliced for a Prusa mini. Print without…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
176
Likes
24
Rating
5
P
PrintablesHappyKatz

Maytag / Whirlpool Washer & Dryer Knobs

These knobs can replace both the large and small knobs on a Maytag or Whirlpool washer and dryer. Backstory: My large timer knob cracked on my Maytag dryer after only two years of use. On removing the broken part, I find that the knob was…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
9
Rating
5
P
PrintablesAriel Lo

Suszarka na pranie - zabawki dla lalek (Clothes dryer - toys for dolls)

Suszarka na pranie - zabawki dla lalek Suszarka zrobiona dla moich córeczek po tym jak wyciągły ubranka dla lalek z zabawkowej pralki i powiedziały "tato nie mamy gdzie wieszać ubranek..." :) (Clothes dryer - toys for dolls) A dryer made…

Downloads
116
Likes
18
Rating
5
P
Printables3Dietzmann

Filament dryer GCODE for your printer!

ON YOUR OWN RISK! In general you need heat to dry filament. Only silica gel etc. is not enough to move the moisture out of your filament. If you don't have a dryer like me, you can use your print bed for drying. You can use a small box…

Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
4
Rating
0
P
PrintablesMartin

PolyDryer Additional Silica Box

An additional silica Box for the Polymaker PolyDryer. It can contain up to 30g Silca. Keep your filaments dry :)

Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
21
Rating
0
P
Printablesbilliebuilds

Kobra 2 neo top mount dikale dryer mount

This is meant for a paired combo of Kobra 2 Neo and the Dikale single spool filament dryer- it may work for other combos! especially the other anycubic FDM's. Please let me know if you try for other dryers or printers!

Print approx. €14.32–€17.51 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
18
Rating
0
P
Printables3D KIMBA

PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints

PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints This mod platform is designed to be placed inside the Polymaker PolyDryer , transforming it into a more versatile tool for makers. By elevating objects inside the chamber, it…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
46
Rating
5
P
Printablesaaronp18

Wetsuit Boot Dryer Insert Windsurfing Water

I have found that the inside of my wetsuit boots struggle to dry without being propped open, which is difficult to do, especially when away. So, I quickly designed this! These are designed to go inside your wetsuit boots to keep them…

Downloads
84
Likes
20
Rating
0
P
PrintablesMroadrunnerM

SUNLU FilaDryer S1 Bracket Ankermake MC5

Bracket designed for my SUNLU FilaDryer S1 Plus Drybox. So that I can place it on my Ankermake MC5. Please note that placing this bracket is tight, but it all fits very well. You can move them once you have placed them. Top Bracket is…

Downloads
83
Likes
10
Rating
0
P
PrintablesOBConcepts

JOSEPH JOSEPH DISH DRYER WATER DRAINER EXTENSION

The JOSEPH JOSEPH dish drainer has a water drainage slide that is unfortunately too short to reach the sink in the house. The faucet's position does not allow the dish drainer to channel water into the sink. I designed a 3d-printed…

Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
79
Likes
13
Rating
5
P
PrintablesWheim

Drinkmate Bottle Dryer and Wall Storage Solution

This is a solution to getting the Drinkmate CO2 pressure bottles off of your kitchen counter and (hopefully) looking cleaner while being rapidly accessible. We purchased a Drinkmate machine several months ago and use it daily; this means…

Downloads
76
Likes
13
Rating
5
P
PrintablesAWSW

Seed Dryer 85x85mm with 3 trays for 80x25mm fans

Medium sized seed dryer I made for a friend who grows a lot of chilis with super tiny seeds with about 1mm in diameter. Features: It contains 3 trays with the size of 85x85x15mm. The trays fit tight with a 0.25mm gap into the tray holder.…

Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
16
Rating
0
P
PrintablesPnoreck

Sunlu FilaDryer S2 Spacer

I found a couple of spacers for the Sunlu FilaDryer S2, but they were all too loose and/or too big. Since the spacer opens the whole top of the box, it doesn't need to open it up too much. I tried a couple of spacers, and most of them…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
7
Rating
5
P
Printablesbuchnema

CPAP Hairdryer Hose Adapter

To thoroughly dry a CPAP hose after cleaning (or because of condensation from the humidifier) you need to blow a lot of warm air through it. So I made this adapter which connects a Braun Satin Hair hairdryer to a standard 22mm CPAP hose.…

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
50
Likes
17
Rating
0
P
PrintablescoffeeFueledDiy

Samsung Washer/Dryer Knob Mount DC64-03186A

NOTE: Print tilted at 45 degrees angled up off the build plate to provide enough structural support for both the clips and center post. This piece is held into the decorative knob shell with 4 Phillips screws. Simply unscrew the old…

Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
6
Rating
0
P
PrintablesOtty_Skipper

IKEA Tisken rod holder , Shower curtain Clothdryer

Simple holder for a 20mm rod to insert into the IKEA tisken holder. You need 2 of the parts and a rod that is the length of the shower cabin, which is now simply inserted into the holder. printed with 50% infill made of PETG

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
8
Rating
0
P
PrintablesMr. Bartzabel

Chilly's Bottle Dryer

Chilly's Bottle dryer to help jo dry your bottle vertically! This is one of my first models up here, so feel free to try it out, I would love to hear some feedback! This bottle dryer helps you, to let the chilly's bottle dry in a vertical…

Downloads
42
Likes
4
Rating
0
P
PrintablesRPK

Hair Dryer Fan Radiator Mount Remix

EN: I noticed that the hairdryer liked to position itself perpendicular to the radiator, which takes up space. I therefore added 2 studs to the ring part to hold it in the position parallel to the radiator (to the wall). The other part(s)…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
2
Rating
0
P
PrintablesDennis Judd

Dryer ball shelf

This is a remix but I put a lot of tweaks on it. I wanted something that could hold multiple sized balls but also attached to the wall near by. The STL is a solid piece that I split using the cut tool in prusasclicer 2.6 with 2 pins to…

Print approx. €15.34–€18.74 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
2
Rating
0
P
PrintablesSJM

bath clothes dryer / Wannenwaeschetrockner

This is a replacement part of a bath clothes dryer protecting plastic part for the foot/stand. See the Pictures. I used PETG. Settings Value Infill 15% Perimeters 2 Layer Height 0.2 mm Material PETG ( PLA ) Supporting Material everywhere…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
2
Rating
0
P
PrintablesIwog

Dryer for flutes

It just need few screws and threader (I used M3)

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
2
Rating
0
P
PrintablesTRex22

Carmen Hair Dryer Ionic 1600W Back Cover

The original back cover of this hairdryer likes to suck in hair. I made a new one to stop this. This is my first OpenSCAD model I printed it at 0.2mm with traditional grid supports. The supports were a bit difficult to remove.

Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
2
Rating
0
P
Printablesrejnok

Outdoor cloth dryer center joint (replacement part)

I think: 10% infill, 4-5 perimeters and 2mm top and bottom solid layer thickness can be enough, but you can try lower values for cheaper print, but result may brake in your situation (STL model is upsidedown)

Print approx. €8.16–€9.98 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
Printablespueckler

Passive filament dryer / Filamenttrockner passiv

(English description below) Der Filamenttrocker dient zur Lagerung von Filamentspulen. Er wird nach dem Befüllen mit Silicagel in das Kernloch der Filamentspule eingelegt. Das Hygrometer zeigt den aktuellen Feuchtigkeitsgrad in der Box…

Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
1
Rating
0
P
PrintablesAbílio Costa

IKEA SAMLA filament dryer

Adapter parts to use an IKEA SAMLA box directly on a food dehidrator, like the SilverCrest one (but there are other brands for the same dehydrator). Why? You get a 4-roll filament dryer for a cheap price! You can have multiple boxes of…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
1
Rating
0
P
Printableseds_3d_shop

Slim front side AMS (and Hydra) narrow side corners silica dryer pod/drybox with snap fit lids for Bambu Lab AMS

UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…

Downloads
13,525
Likes
751
Rating
4.96
P
PrintablesQuattrox

Bottle Dryer System

check out the other versions Here we have an easy to print and easy to store Bottle Dryer System you can choose from 3 diffrent types of dryer (the Straight Version is better for small mouth bottles and cups) 2 diffrent Holder a version…

Downloads
9,264
Likes
4,490
Rating
4.85
P
PrintablesLolcio

Soap dish, Sponge dryer with drainer. INDX gcode included

The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…

Downloads
8,928
Likes
1,476
Rating
4.94
P
PrintablesDET-Man

PolyRoller - Smooth Rolling with KID'nR for PolyDryer

I really like 🥰 the PolyDryber boxes: The overall concept is great, the form factor is perfect, it has a cool design, …. but there are some design flaws that need to be fixed. 😉 But don't worry, you can do it! 😎 Remark: I designed the…

Downloads
8,067
Likes
150
Rating
5
P
Printablesdietrich

BambuLab AMS Dryer pod with indent for AMS fix

Remix of the box to have an indent that makes it slide in place even with installed AMS reinforcement clips. For me no resizing was necessary. AMS reinforcement clips The AMS reinforcement clips were introduced by BambuLab as a quick…

Downloads
5,932
Likes
530
Rating
4.89
P
PrintablesVoltex

Sunlu FilaDryer S2 Improvement Wedge

So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…

Downloads
5,746
Likes
828
Rating
4.9
P
PrintablesSTprinting

Bambu Lab AMS Dryer pod w/ snap fit lids

I remixed the box to have a snap-fit lid and vertical holes for less bridging. I added a new version that takes inspiration from the Galactic Empire. (I was bored and have not had a chance to test print)

Downloads
5,174
Likes
615
Rating
4.95
P
PrintablesQuattrox

Bottle Dryer System v2

check out the other versions The bottom of this version is flatter and straighter, making it easier to place bottles, mugs, cups, etc... on it we have 4 versions Version 1 simple it works but for me it is a bit too shaky Version 2 more…

Downloads
4,806
Likes
1,429
Rating
4.85
P
PrintablesDET-Man

POLYmount - The Ultimate PolyDryer Snap-In Wall Mount

Tired of broken wall mounts? Meet the wall mount your PolyDryer actually deserves! If you're like me and love your PolyDryers but found yourself frustrated with the original wall mount being difficult to use (and worse, breaking over…

Downloads
4,673
Likes
132
Rating
5
P
PrintablesJal Shah

Bambu Lab AMS Active Filament Dryer

A simple solution to keep filaments dry even when they're stored in Bambu AMS for a long time. While AMS does store filaments quite well with airtight container, I just wanted active drying solution implemented as I have been running all…

Downloads
4,271
Likes
267
Rating
0
P
PrintablesDET-Man

openGrid Snaps for POLYmount and PolyDryer

Mount your lovely 🥰 POLYmount (or the original PolyDryer wall mount) directly to the 🤩 openGrid wall organization system with these handy directional snaps ! Two snaps attach to the upper and lower mounting points, perfectly centering…

Downloads
3,763
Likes
28
Rating
0
P
PrintablesExtrutim

Drybox | Cheap Filament Storage Box | Polydryer Compatible Dry Box

I wanted a Drybox that is as affordable as possible without compromising on features! There are already many designs out there that use the well-known cereal box as a basis, but none of them met all my criteria. I wanted to change that.…

Downloads
3,688
Likes
1,870
Rating
4.96
P
Printablesdteng

Desiccant Box for Creality Space Pi Filament Dryer

This desiccant container fits inside the Creality Space Pi (single-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a double-spool…

Downloads
3,563
Likes
579
Rating
4.93
P
PrintablesChrisfu

Quick connect exhaust hose mounting sets for portable ACs and dryers various sizes === no supports ===

I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…

Downloads
3,472
Likes
1,008
Rating
4.91
P
Printables3DPrintSOS

PolyMaker PolyDryer - Double Barrel Mod

I LOVE the modular design of the PolyMaker PolyDryer. However, one thing it couldn't do over my previous setup was dry two filaments at the same time. Well, now it's totally possible thanks to the Double Barrel Mod . Print this mod in…

Downloads
3,276
Likes
645
Rating
4.91
P
PrintablesQuattrox

Bottle Dryer v4 (expandable)

check out the other versions it's bigger it's more stable and it's expandable here the latest version of the bottle dryer in different versions this version is taller and wider than previous versions i added a dovetail connector system so…

Downloads
3,007
Likes
502
Rating
4.93
P
PrintablesTeachingTech

Spherical port for filament dryers - Open source and parametised

Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…

Downloads
2,751
Likes
772
Rating
4.75
P
PrintablesEDGE_OF_3D

PolyDryer Desiccant Funnel

A quick printing funnel to aid in filling the desiccant holder of the Polymaker PolyDryer Dry Box. Balances the holder when filling, quick to print, oriented for proper printing, print in any material, no supports needed.

Downloads
2,655
Likes
537
Rating
4.95
P
Printablesdteng

Desiccant Box for Creality Space Pi Plus Filament Dryer

This desiccant container fits inside the Creality Space Pi Plus (double-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a single-spool…

Downloads
2,652
Likes
475
Rating
4.87
P
Printablesgwg

PolyDryer Air Exchanger

Most 3d printing filament dryers have a fundamental flaw: they heat the filament and pass air over it, but they are a closed system with no venting, so moisture escapes only by accident. With single piece dryers, fixing this is intrusive…

Downloads
2,560
Likes
618
Rating
4.97
P
Printableshexvolt

PolyDryer Extra Desiccant Container

Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…

Downloads
2,545
Likes
446
Rating
4.96
P
PrintablesBarney123

fruit and vegtable washer and dryer

fruit washer and drier. small and large. can also do vegetables.

Downloads
2,501
Likes
537
Rating
4
P
PrintablesFerCuru

ELEPHANT DRYER

A little friend for the kitchen! happy printing ;) You should also try v2: https://www.prusaprinters.org/prints/43601

Downloads
2,454
Likes
631
Rating
4.92
P
PrintablesSJB4127

Parametric Dehydrator Filament Dryer (Up to 10 x 1kg Spools! )

Update 2023.11.18: I've added a Fusion 360 paramaterized model of the side walls, so everyone can mix and match the design to match their specific food dehydrator. It has been only teste for certian combinations, so the model still may…

Downloads
2,388
Likes
715
Rating
4.91
P
PrintablesRainer

Socks dryer

I hate hanging up socks. This makes it a little better.... For the hexagon look, simply set the bottom and top layers to 0, perimeter 3. Hexagon infill 15%. For more stability it can of course also be printed normally.

Downloads
2,329
Likes
728
Rating
4.93

Sunlu FilaDryer S1 filament dryer box PTFE fitting mounts (M10/M6)

Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…

Downloads
2,272
Likes
332
Rating
4.94
P
PrintablesShane Finn

Water Bottle Dryer

This is a remix of scmake's dryer https://www.thingiverse.com/thing:4579574 . I loved the aesthetic of the original but found it was a little unstable with a bottle fitted and scaled down prints for small bottles were too fragile to be…

Downloads
1,911
Likes
311
Rating
4.92
P
Printablessteve5092

Wall Mounted Holder for Dyson Hair Dryer ( Dyson Supersonic )

Wall Mounted Holder for Dyson Supersonic Hair Dryer. Need to prepare some magnets, please refer to the following URL link for specifications.…

Downloads
1,890
Likes
242
Rating
5
P
PrintablesTickTock

HarvestRight Freeze Dryer Tray Stacker

[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…

Downloads
1,874
Likes
137
Rating
4.8
P
PrintablesFurdTerguson

SUNLU S1 Filament Dryer M10 PTFE Guide

Mashup of Jevermeister's https://www.prusaprinters.org/prints/116779 and EveningNewbs' https://www.thingiverse.com/thing:4855279 PTFE Guides for the SUNLU FilaDrayer S1 filament dryer. I wanted a PC4-M10 fitting, and Jevermeister's…

Downloads
1,823
Likes
242
Rating
4.94
P
PrintablesPolymaker

Airlock Dock & Stacker for PolyDryer

The Airlock Dock & Stacker slide onto the lid of the PolyDryer™ Box and are held with a friction fit. The airlocks can be press fit into the dock and are also held in place with a friction fit. The Stacker version allows you to stack…

Downloads
1,762
Likes
392
Rating
4.93
P

Snapmaker U1 – PTFE Tube Radius Guide (Dryer to Feeder)

CZ: Tento držák PTFE trubičky jsem navrhl jako řešení pro bezpečné vedení filamentu ze sušičky do podavače Snapmaker U1. Umožňuje vést PTFE trubičku v kontrolovaném radiusu, takže se neláme, nekrčí a nezpůsobuje zvýšený odpor při podávání…

Downloads
1,729
Likes
258
Rating
5
P
PrintablesHaprog

Filament dryer extension for SilverCrest dehydrator

This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…

Downloads
1,664
Likes
254
Rating
5
P
PrintablesGeorge42rus

Parametric Sock Dryer (Solidworks)

To change you need to use Solidworks 2022 or later

Downloads
1,570
Likes
715
Rating
4.89

Air Gap Spacer For Sunlu S2 Filament Dryer

If you own a Sunlu S2 filament dryer, then you probably know that the lack of a fan prevents the humid air from being properly circulated out of the box. One of the simplest ways to get around this is to crack open the case a bit during…

Downloads
1,402
Likes
152
Rating
4.97
P
Printablessquidball

Second Desiccant Container for PolyMaker PolyDryer

Update v2 (Sep 14 2024): Due to popular demand, version 2 now features vertical grill vents and removes the arrow tabs on the cover. While version 1 works for most, some encountered printing issues, which this update addresses.…

Downloads
1,399
Likes
184
Rating
4.53

SUNLU Dryer S2 Mod

This improved version is designed to prevent the filament from falling off the roller when the filament material is exhausted and to roll well without resistance. Some parts of Multiple Mechanism Auto-Rewind Spool Holder have been…

Downloads
1,390
Likes
238
Rating
3.75
P
PrintablesRon

SUNLU S2 Dryer Net

Two models for SUNLU S2 Dryer that can hold variety of things needed to be dried such as renewable silica and more. Thinner model is as wide as standard filament roll of 1.75mm 1 kg. Wider model is as wide as it can be, to fit nicely…

Downloads
1,365
Likes
410
Rating
4.9
P
PrintablesIanryeng

Scrub Daddy Dryer

Update 04/14: Revised design to have a flush bottom eliminate the need for supports if you have good bridging capability :) Vertical drying rack for one or two scrub daddy sponges. The grove on the bottom matches my sink but included the…

Downloads
1,360
Likes
347
Rating
4.93
P
PrintablesEric T

Sunlu S1 Filament Dryer Lid Support

Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…

Downloads
1,335
Likes
192
Rating
4.91
P
PrintablesFumanseano

PolyDryer PTFE Adapter 6mm O.D. to 4mm O.D.

Adapter plug to convert the 6mm inlet on the PolyDryer to fit 4mm OD PTFE tubes. Now it's possible to directly feed from the dryer with a fully constrained reverse bowden setup. I have included the step files, so you can modify it to suit…

Downloads
1,326
Likes
199
Rating
5
P
PrintablesDrake
18+

The source marked this model as adult content.

Downloads
1,267
Likes
100
Rating
4.67
P
PrintablesTsukemono

Polymaker Polydryer Desiccant Holder

Two of these fit snugly in the lid of the plydryer box. When loaded with desiccant they will not fall out and installed they leave room for the filament roll to spin freely. To make the mesh on the lid you must use a modifier shape with…

Downloads
1,235
Likes
230
Rating
4.83
P
Printablesap.engineering

2 Spools Printable Filament Dryer

Remixes Available for other Food Dehydrators: Silvercrest 350W / Quigg 350W Food Dehydrator: https://www.printables.com/model/494734-2-spools-filament-dryer-for-silvercrestquigg MisterChef® Professional Food Dehydrator, 250W:…

Downloads
1,213
Likes
665
Rating
4.75
P
PrintablesFerCuru

Elephant Dryer 2.0

a better friend for the kitchen! Print instructions Regular Pla, no supports. 100% scale. Happy Printing!

Downloads
1,179
Likes
266
Rating
4.85
P
PrintablesRobert Givens

BambuLab AMS 2 Pro Dryer Pod

Narrower remix of the original box to fit the AMS 2 Pro.

Downloads
1,159
Likes
92
Rating
4.89
P
PrintablesJC_Hood3

Creality Space Pi Filament Dryer M6 PTFE Adapter

This adapter allows the replacement of the rubber grommet for the 4mm PTFE tube with an M6 pneumatic fitting to avoid the PTFE tube from being pulled into the dryer. Update 4/19/24: I noticed that the adapter will loosen up after repeated…

Downloads
1,157
Likes
124
Rating
5
P
Printablesjames

fruit and Berry washer and dryer

so fun to print and use but support may be needed

Downloads
1,154
Likes
111
Rating
4.71
P
PrintablesMichaelQ

Sunlu FilaDryer Filament Dryer S2 PTFE Adapter

With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable. You need to remove the…

Downloads
1,152
Likes
153
Rating
4.94
P
PrintablesExtrutim

Drybox To Fit Polydryer | Fully Printable

I thought that instead of buying an additional box, you could simply print a better one yourself! My box is not only compatible with the Polydryer, unlike the original box it is also stackable, has an improved closure, a slot for labeled…

Downloads
1,123
Likes
478
Rating
5
P
PrintablesMorgan.T

Sovol Filament Dryer SH01 and similar dryer extension feet

Description : Sovol dryer is perfect but the underside gets very hot. This holder protect the support and help to dissipate heat. re-use original pads hold in place without glue Version : V1 (deprecated): - Perfect for my dryer V2 : - Add…

Downloads
1,109
Likes
157
Rating
4.92
P
PrintablesPolymaker

PolyDryer Wall Mount

Wall mount for the PolyDryer™ Box. Printed in 2 parts the wall mount attaches with 2 screws and the PolyDryer™ Box is fixed with the 3D printed clip. Print Wall Mount with >4 perimeters.

Downloads
1,076
Likes
242
Rating
4.6
P
PrintablesSimon

Desiccant Drying Trays for the Creality Space Pi Filament Dryer

First things first; make sure you have a filament that is suitable for the max temp of the dryer (70°C according to Creality) plus a margin to account for the heat being greatest at the back near the exhaust vent. Any filament with a…

Downloads
1,046
Likes
265
Rating
4.83
P
PrintablesConr8r

Modular Herb Dryer\Dehydrator

Description This is a modular herb dryer/dehydrator with stackable shelves and sliding trays. This dryer uses passive airflow to dry out herbs gradually and doesn't require a heat source or electricity. Instructions Printing This is a…

Downloads
1,034
Likes
614
Rating
4.58
P
Printablesmstoica

SUNLU dryer filament guide

When using SUNLU drybox on top of IKEA Lack enclosure, to make the filament traction smooth I created a filament guide adapter to be used with the lower hole on the case. This was inspired from https://www.thingiverse.com/thing:4833453…

Downloads
1,023
Likes
163
Rating
4.81
P
PrintablesAmicoJeko

Hair dryer holder

This is a simple hair dryer holder for the bathroom. So my wife don't have to put it away every time and the cable won't become a dreadlock again :) It can also be used as a cup holder Print Settings Printer Brand: Creality Printer: Ender…

Downloads
990
Likes
145
Rating
4.69
P
PrintablesAsdfg

Sunlu Filadryer S1 Plus/S2 Dryer Rack

Dryer rack that fits like a spool inside your Sunlu Filadryer S1 Plus/S2. Gaps are 1mm wide so your Silica Gel beads wont fall through. Works well with bags and loose beads. Depending on what material you print with you can crank up the…

Downloads
989
Likes
168
Rating
4.9
P
PrintablesAdjuro

Sunlu Dryer PTFE adapter

I am using the Sunlu Dryer for storing and using my filament. But the simple hole for letting the filament out is not enought. To fix this I designed an adapter to connect a pc4m10 or pc6m10 (conical) pneumatic connection. The hole being…

Downloads
989
Likes
152
Rating
4.95

SUNLU Dryer S2 Mod #2

I updated the Shaft and Nut in addition to improving the Sunlu Dryer I made previously. You can check the improved Sunlu Dryer from the link below. https://www.printables.com/model/247479-sunlu-dryer-s2-mod

Downloads
971
Likes
122
Rating
5
P
PrintablesJoesTinman

Sunlu S2 Desiccant dryer tray - Faster print

I liked the idea of the original but because of all the small holes it takes forever to print. This version uses horizontal slots in the sides and also an interlaced bottom, making it print in about half the time of the original. I also…

Downloads
969
Likes
134
Rating
5
P
Printablesfe4rnandez

PolySnap (it..) PolyDryer Wall Mount (now with style) v. 1.1

PolySnap (it.. - and now in style) - the more easier and efficient wall mount for the PolyDryer -- Update 03.2026 The PolySnap is a mechanically optimized wall mount for the PolyDryer, designed with print orientation, load paths and…

Downloads
953
Likes
28
Rating
5
P
PrintablesMike Moss

Creality Space Pi Filament Dryer center spool

Creality Space PI dryer Spool holder • Print the Cap NUT and Centre part and then L and R side support • I did on K1C So did in two prints • I used all standard settings without supports • Creality Hyper PLA • 2 X bearings required 8x19x6…

Downloads
940
Likes
177
Rating
5