Counting matching models…
With the bowl in the center a simple but very effective way of sorting those nuts, bolts, washers and other hardware. Update 13/09: Added a version with bottom, so you don't accidentally push out one of the trays if you lift it.
JERRARI3D.com This is a collection of the common hardware used in the GEN2 Modular storage system . Watch included videos for additional assistance. *NOTE: Some hardware have "L" or "R" to correspond to their required placement • GEN2-QL…
Made a divider for my hardware bins. I'm sure they will fit any but the box I have is an HDX brand, as shown in photos. I printed using “vase” mode because I'm not concerned with strength but it used less filament.
UPDATE December 14, 2025: I added some thrust washers. These are there to keep the Swirly-Hub-Things™ from jamming against the legs. Ask me how I know we need this! UPDATE December 9, 2024: I modified the Onshape project to make the the…
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
I know there are some tracks already available, however, they were way too big for my truck, not very scale and you need additional hardware. Also if your axles have caster these other tracks won’t fit. With my design you only need: 24…
RepKord's incredible RepRack is a great solution for filament hanging - but the Clamps that hold the Rods to Hangers require non-standard Hardware. Here in Germany, we like things standardized and in accordance to norms. So this thing…
These are stackable bowls for holding or sorting small parts and hardware. The socket in the top of the bowl will accept a 3/8dia x 1/8thk neodymium magnet and the socket in the base of the bowl will accept a ¼-20 socket head cap screw.…
Created something silly yet simple for spring-modded Nerf blasters, as the full-length darts flew everywhere after the FPS increase. I was surprised it wasn't made yet, so here we go again. I took the model of the Nerf Delta Muzzle from…
A variation of the sniper Silly Shell that doesn't need any hardware, just filament and super glue. 2 printed barrel options are included for different sized beds, 1Ft and 10 Inches. As far as I can tell there isn't much loss in speed…
This is a fully 3D printable modular drawer system built on a grid affinity design. No screws, bolts, or external hardware are needed—everything is printed. 🧵 Recommended Print Settings: Material: Use PETG for the drawer system for…
Iron Sights -- ONTOS hardware free for the Picatinny rail Adapted my one piece iron sights so that the shape fits better to the ONTOS (original) optic rail. The files are already pre-oriented. It needs approx. 20g of filament. My print…
I needed a way to attached Bruce Leedle's mega master-key to my newly assembled/built Mayfly. This (no hardware) clip on picatinny will work on a stock Maverick or a Mayfly. To help fitment and remove any rattle I added a .5" strip of…
In our house, we loathe wasting money on liquid detergents that cost as much as a box of powdered detergent, and clean half as many loads. This dispenser was designed to hold our detergent in a closed box to alleviate some of the humidity…
Add a touch of rustic charm and comfortable seating to your miniature scenes with this 3D printable STL model of the Oviedo Leather Stool. This stylish furniture accent is perfect for enhancing dollhouses, dioramas, or any interior…
This is a very specific fix for a very specific problem that you don't likely have.
A quick adapter to use common M3 screws to secure 608 bearings. Not as strong as using an 8mm bolt - but plenty secure for a lot of projects. Hardware needed: M3 x 25mm FHCS screw M3 nylon lock / nyloc nut Print as oriented. No supports…
Files Included Container / module body Sliding drawer Label plate Printing Notes Designed to print support-free in common orientations. Recommended materials: PLA or PETG Suggested settings: 0.20 mm layer height , 3 walls , 10–20% infill…
This is a simple bracket that I printed to easily hold a water bottle onto our rabbit's cage. We had a wire bracket before but it was annoying to use, this is much easier. I recommend that you use petg fimalent. Fits a bottle that's 2" in…
Got tired of seeing thick/bulky side panels plus seeing you needed extra screws and hardware to mount them. Designed this to be applied without any extra hardware or screws needed. All you need to do is remove the support bars on the…
Flex-Grid Hardware Organizer – The TPU Handy Helper Stop losing screws and rolling bits mid-project! This organizer is a flexible staging block designed to hold screws, bolts, and drill bits securely while you work. By utilizing a dense…
I added an Electronic Lead Screw (ELS) to my Mini Lathe and as a part of that project I needed brackets to bolt the Encoder and two NEMA Stepper motors to the lathe. I printed patterns that I used for sand casting the two NEMA brackets in…
2026-05-08: Update: Added center pillars (filename: B-Pillar) and display plates to hold (post/trading )cards CBN01 – Modular Media Cabinet System (no hardware - no support) What if furniture is digital? Hello, let me introduce CBN01,…
As requested, a print in place variant of a rugged box case for the LTT screwdriver. Both Noctua and regular editions are available as well as a non-multicolor capable printer for the regular version, just print the LTT logo and insert it…
Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…
Printable hardware for 3x3 squat rack attachments with 1" holes. Bolts come in 100, 110, and 120mm lengths as well as flat or knurled heads. Nuts in either hex or knurled. These obviously won't hold substantial weight - but may be useful…
Remixed from Recticle's Angled vertical foregrip (Originally on Thingiverse). This is just the same but I adjusted the diameter of the holes to fit Magpul OEM MLOK hardware. Good for anything MLOK, whether it's a firearm or an airsoft,…
Adjustable Phone Stand (Tilting, M5 Hardware) A simple, sturdy phone stand with adjustable tilt (multi-angle positioning). The angle is locked by friction using two M5 joints , so you can set it exactly how you like for desk work, video…
Door hanger and hooks to hang shelving on the back of a door. Makes hanging shelving (without drilling holes in the door) very easy. Use adhesive or command strips for the hooks to prevent the shelf from moving, while the over-door hooks…
With this mod, it is now possible to buy a whole Nextruder in pieces without the need for buying a MK3.9 Kit . This mod removes the need for the missing 'Pin 2.9x8.5', 'Tubular spacer 13.2x3.8x0.35', and the 'Spacer 6x3.1x8'. These are…
Safety Disclaimer This began as an April Fool's project--do not shoot Sillyshells at people or animals. Nobody wants a hunk of plastic hitting their head at 30mph. Depending on the material you shoot at, your shells could chip or break.…
We designed and printed hinges and handles for our own CamperVan | RV. You can also use them for your caravan ofcourse.
This 3D printable organizer is designed to keep your workshop neat and efficient. It features multiple compartments arranged in a grid layout, each with a sloped front for quick access to small parts like screws, bolts, nails, and other…
Hardware kit: https://www.ak-blastermod.com/product-page/drawn-line-blaster-by-ashton-3d-parts-hardware-kit Notes: If you plan to use high-strength springs, I recommend using PLA+ or PETG. Do print high-stress parts out of silk or matte…
A further refinement/version of the previous QD Ergo Stock + ZAX TPU buttplate Lynx 2.1 remix I made, now with a toolless tensioning wheel. Copies the idea from several existing Lynx buttplate remixes, but isn't actually based on any of…
These Gridfinity bins are designed specifically for storing very small components such as PCB rivets, SMD parts, tiny screws, inserts, and other micro‑hardware that tends to escape the moment you open a normal container. The magic is in…
This is my first model from the ground up, I wanted a more secure and bigger rack than what was available online. Its 250mm tall, 150mm wide, and 268 mm long when assembled, Hardware is needed for stacking racks together just a M3 nuts…
This is my take on Hardware from Silverhawks. You may need to scale this to your preferred size.
I shamelessly stole the mounting mechanism for the Ontos Iron Sights picatinny rail and put a scope on top. Although it looks good on the Ontos, it only functions as an iron sight. Should load pre-oriented and be printed in the pictured…
Here's a little container to temporarily hold your screws, bolts, and nuts during a project so they stay in one spot and don't roll away! I made it with basic PLA and it came out perfect, and it doesn't need supports! Dimensions :…
put the pin in the hole so it stays in place, no screws or heat inserts required at all.
Drop-on radiator hook that needs no tools, no holes, no hardware. The big U at the top hangs over the main tube of a heated towel radiator (fits panels up to about 36 mm thick). A straight spine drops down in front of the radiator, and a…
This rack system uses a combination of off the shelf plastic organizers, laser/CNC cut parts, and FDM printed parts to make an easy to use, efficient organization system for small parts and hardware. The system is highly modular and keeps…
Drill guide / jig to install cabinet pull knobs on "slim shaker" style cabinetry with a 3/4" frame. This drill guide works for upper or lower cabinets and places the knob 1" from the side of the frame and 1.5" up/down from the frame;…
Rather than using the sheet metal screws the Scanstrut DS-HD6-BLK came with, I made this mounting plate for m3 screws and nuts. Here's the hardware kit I used Parts list: Scanstrut DS-HD6-BLK (good for ~10 awg solar cable in my…
Extend your Nerf blaster's tactical rail by 120mm with this fully printed, no-hardware extender. Compatible with standard Nerf blaster rails. Designed for modders who need more real estate for attachments without any screws or glue — just…
Upgrade your Nerf blaster with this front and rear sight set, designed to snap directly onto standard Nerf blaster rails. No screws, no glue, fully printed in one go. The rear ring sight and front post are designed to align naturally for…
A clean, stable vertical stand for displaying your bokken. Designed from scratch because nothing available fit the bill — this one does. Prints in 4 parts that assemble easily with no hardware. Gluing is optional but recommended for…
This is a display case, right now it is empty soon it will not be, would recommend printing it on its side because of the plexiglass slot. The plexiglass I used was 8in. x 10in. .050in. ( purchased from local Home Depot ) There is no…
Keep your hairdryer stored in a convenient, accessible spot by mounting it directly onto a radiator pipe. Frees up counter and drawer space without drilling holes in your wall. Includes a slot for a diffuser attachment. Compatibility:…
This is a mashup remix this using the following two things: I used the insert from IKEA Lack Adjustable Foot by Humahua https://www.thingiverse.com/thing:2921254 and scaled down the foot from IKEA Lack Table Leg Leveler by muckypops…
The AR Gripper is an open hardware parallel robot gripper designed for handling everyday items such as bottles and cups. Specifications Grip: 3M gripping material with foam rubber pads Stroke: 103mm Weight: 570g Closing Speed: 80mm/s…
Hardware: Kitchen rubber band, most will work, mine have a diameter of 35mm when laid out flat M4*25 bolt and nut, one per sight This is a set of iron sights that uses a tiny rubber band to work, the sights will snap into the lowered…
Modified BLTouch mounting bracket for shorter hardware on the Sliceworx FDD1 system
Check out my new Toy Switchblade design here . This is a toy Butterfly Knife / Balisong I designed. No metal hardware such as screws or bolts are needed. Check out my new fidget spinner and print in place bearing here . You can find my…
Check out my new Toy Switchblade design here . This is a toy gravity knife I designed. It is fully 3D-printed and requires no hardware or glue to make. If you enjoy the design a like or make would be appreciated. Check out my new fidget…
Check out my new Toy Switchblade design here . This is a revised version of my first balisong design. This new design is balanced better for flipping, very durable, and easier to print. There are also many options for customization. There…
NEW SIZES AVAILABLE HERE: https://www.printables.com/model/778060-screwu-nit-hardware-organizer This is a reimagined remix (HUGE UPGRADE) of the great Modbot Voron Hardware Organizer. (More Drawers can be found on Thangs) PRINT SETTINGS:…
YOU ASKED FOR IT! 3 NEW Sizes! Original 4x7 ScrewUnit available here: https://www.printables.com/model/774134-screwu-nit-hardware-organizer ScrewUnit! A hardware parts organizer where size matters. 4x6 4x5 4x3 Added drawer stops!!! Don't…
Something to grab small screws, nuts, bolts etc. out of parts organizer drawers and bins. Tweezer end for picking small objects out of bins or magnet end for quick collection. Magnets also useful for quick storage to keep the tweezers…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. I liked OpenSourceClassroom's "Magnet Hardware Helper" (…
Super easy print with no supports or extra hardware. Fully 3d printed. Super glue required to for only one part, the Tuning Knob. Your gear will turn more freely and smoothly if you sand down the round axis that inserts into the gear.…
100% Support/Hardware Free This is by no means a heavy duty, metal, vice replacement. However, it is pretty durable and suitable for the regular hobbyists. It can grip things pretty well. Whether you're clamping together something to be…
Blaster overview: https://www.youtube.com/watch?v=glRXdd7pP-U Printed plunger tube overview: https://www.youtube.com/watch?v=QpMW5P51Vow Full assembly video here: https://youtu.be/Mo5sGpauzpw?si=SMMSYdP7EJdTvixH This is the Low Hardware…
Remix of Modbot's V0.1 screw organizer. Modified to skeletonise the back and include wall mounting keyholes. Original Model:…
Divider for this hardware assortment: https://www.lowes.com/pd/Project-Source-5-71-in-Silver-900Pc-Bolts-Nuts-and-Washer
This hardware volume mixer features 4 dials and 1 slider. It costs about 25€ to build. What you need: 1x linear sliding potentiometer 10k Ohm 75mm 4x linear potentiometer 10k Ohm 6x M2.5 x 5mm machine screw 6x M2.5 heat-set inserts 1x…
I took the threads from the ex bcar and grafted them onto Leedle's hardware-free bcar. Then I cut it in half. Compatible with the pins and rollers of the original hardware-free bcar, as well as any mounting system that uses the original…
With the bowl in the center a simple but very effective way of sorting those nuts, bolts, washers and other hardware. Update 13/09: Added a version with bottom, so you don't accidentally push out one of the trays if you lift it.
Printed in petg Print settings: 100% infill (100% parameters) Supports: no This part does not need hardware to install, and does not need support to print. It's compatible with Nilfisk Neo Vacuum cleaner (The design is derivide from the…
The ultimate hanger collection features a sleek, modern design with dovetails to hide the hardware for a clean and minimalist look. Perfect for entryways, bathrooms, kitchens, and bedrooms. Remember to print the corresponding hook and…
This is a set of sorting trays I made for my maker space. I found myself needing small containers often and decided to design a few small trays. Exported from Fusion360 CAD in high resolution(smooth curves). Internal curve is for smooth…
A simple and discreet support for the Ender 5 bed cable. No fixings required! Buy me a coffee
Made them thinner with additional supports for strength. For use with OEM Screws.
support me —---------------------------------------------------------------------------------------- patreon: https://www.patreon.com/Thatguymakes Mercari (store): https://www.mercari.com/u/that_guy_makes_store/?sv=0…
Simply insert a short piece of filament and melt both ends to assemble.
Use all the support parts from the original, but print this version of the body. There are a number of Rev 2 EX BCAR mounts now for various blasters. Now you can have a fully 3d printable BCAR. EDIT - uploaded a better version. Original…
This is my first design that I have uploaded. I used to be certified in AutoCad over a decade ago, and now that I am Printing, I figured its time to start designing. This hook is specifically designed to be used with 1.25in wide Alien…
JERRARI3D.com This is a collection of the common hardware used in the GEN2 Modular storage system . Watch included videos for additional assistance. *NOTE: Some hardware have "L" or "R" to correspond to their required placement • GEN2-QL…
A handy caddy to store all of your screws and hardware! It has a handle for carrying, a hook for hanging and front labeling areas. Also has the option of a lid. For the caddy, I used breakaway support for under the handle and paper…
Makita Guide Rail connector hardware tube wall mount.
I made this cool project just for fun using fusion 360 with plugin called GF gear generator . No additional hardware needed, all parts are fully printable. The main two axles have small clearance to get is fixed to the main body holding…
I did this model for fun based on request on Reddit: https://www.reddit.com/r/3Dprinting/comments/1fu3cho/looking_to_pay_someone_to_replicate_this_thanks/ Made a few assumptions like depths, reduced text. CAD file included
Description I remixed this model for use with 1/4" nuts and bolts rather than m5. I moved the holes a bit more centered in the print for stronger walls. I rotated the 3rd nut hole so it can be printed without supports. I wanted to mount…
This blaster is licensed for personal use only! Please do not sell it. If you'd like to buy a prebuilt, please check Gryphons And More (licensed by Sillybutts) on etsy! The Low Hardware Mini Claw is a remix of the LHTCU, with some cool…
This is the totally free to download file set that everything to make your Aeon Pro X pump action! It includes a variety of cosmetic muzzle options and various pump options to fit your needs. Also included are special versions of the…
Also in the READ ME.txt file: This version of the Cricket has a slightly larger grip, modified lever with better handles, and a redesigned receiver that allows for low power or high power shots, depending on the elastic draw length. It…
3D printed long reach pliers V4. The pliers are designed by me and a remix of a model that I posted. The earlier model required an M3 bolt and nut, this one has a "twist and lock" d esign Print instructions infill I printed with 20%…
Wi-Fi Hardware Monitor using Wemos D1 R1 Mini (ESP8266) Ready for SSD1306 and ST7735 screens Monitor your CPU, GPU and RAM over Wi-Fi OTA Firmware updates Instructions here https://fixolab.dev/en/blog/wifi-hardware-monitor Model available…
This is a combination of the ZAX TPU buttplate QD Ergo Stock Lynx 2.1 remix and the Kelly Industries QD Ergo Stock Lynx 2.02 Remix. I like the metal insert found in the Kelly Industries The nut side of the QD insert is unchanged from the…
Made a divider for my hardware bins. I'm sure they will fit any but the box I have is an HDX brand, as shown in photos. I printed using “vase” mode because I'm not concerned with strength but it used less filament.
A Picatinny-mounted Sillyshell holder. It's designed so you can fit multiple on the same rail with no extra space between, and with no screws required for easy accessibility. This print holds the shells perpendicular to the rail, a design…
I have remade the ALCH design board holder to hold all but the vertical hole board! All design boards fit very well and are easy to grab without any friction binding the material to the holder. This holds all the M3-M10 hardware design…
This clip requires a M3 screw @6mm in length, and the accompanying hex nut. Just wanted something sturdy and universal.
I had some cracks in my JerryRigEverything Knife Handles and wanted to print some new ones. I also wanted to use the standard hardware that came with the knife. So, recreated the handles and made a few variations. Since the screws are…
UPDATE December 14, 2025: I added some thrust washers. These are there to keep the Swirly-Hub-Things™ from jamming against the legs. Ask me how I know we need this! UPDATE December 9, 2024: I modified the Onshape project to make the the…
