Search results: jig

Sort order

3,812 models

P
Printableswerz 99

Cable Soldering Jig

This is a helper for cable soldering. Exchanged to a faster to print design and attached CAD file. Update 16.04.2023: As requested I added a chamfered version of the model. Thanks and Credits to the originator of this print: mistertech…

Downloads
44,561
Likes
12,633
Rating
4.91
P
PrintablesSheepMe!

Bending Jig

I found this jig made from wood on my trip to Japan twenty years ago in the alleys of an electronics market in Shibuya, Tokyo. I thought why not share with you the little tool that has served me well for years. Model 133 x 17.5 mm Bending…

Downloads
5,393
Likes
2,354
Rating
4.92
P
PrintablesGarage Maker

A remix of the Zipper Slider Jig with clamping improvement

I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back

Downloads
4,366
Likes
280
Rating
4.71
P
Printablesmoucha19

Customizable OpenSCAD Fletching jig

OpenSCAD Fletching jig If you have any suggestions, leave them in the comments or open an issue on GitHub Overview Simple yet effective fletching jig that will adjust to all your needs. Intended to provide new archers with access to 3D…

Downloads
2,023
Likes
198
Rating
4.89
P
Printablesmakerl1969

Router Jig Trimming Radius

Cut perfect outside radiuses with your router and these templates. I offer several versions with different radiuses. The jigs have integrated T-slots, so you can fix them with fastening clamps like the Festool FSZ 120 or FS-HZ 160 to your…

Downloads
1,802
Likes
473
Rating
5
P
Printables3DDIY

Festool Track Saw Kerf Jig for TS75, TS55 and TSC 55K

This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right. Festool saws have different widths so use…

Downloads
571
Likes
102
Rating
4.86
P
PrintablesMarcel

U-scribe jig Uchwyt do trasowania blendy/maskownic

Uchwyt ułatwiający docięcie blendy/maskownicy (krzywe ścienne)

Downloads
550
Likes
52
Rating
5
P
PrintablesBoBaCool

Festool MFT DIY - gabarit de forage - drilling jig - 20 mm

This tool has been designed to easily create a standard MFT like workbench and drilling 20 mm holes every 96 mm. This drilling jig has been printed in Prusa PETG from the the STL found on Thingiverse with supports. All details in 3MF file.

Downloads
393
Likes
53
Rating
5
P
PrintablesFurstjo

gabarit d'angle pour laser, square jig for laser.

gabarit d'angle pour laser, positionnable facilement grâce a des aimants.

Downloads
368
Likes
63
Rating
5
P
PrintablesMrRogers

Bookbinding Coptic Signature Punching Tool Guide Jig

Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…

Downloads
329
Likes
68
Rating
0
P
PrintablesNewk

The Procrastinator 3000 - A Low Tech, Easy To Print, Failproof And Undetectable Mouse Jiggler

The Procrastinator 3000 is the simplest of mouse jiggler devices. Watch how it works: https://i.imgur.com/9lpT7iE.mp4 Features: Low cost and low energy consumption Usage is undetectable by any software Failproof design Very easy to print…

Downloads
254
Likes
44
Rating
5
P
PrintablesHandkopfler

xTool F1 (Lite) Bone Dog Tag Keyring Jig

A plate to hold anodized aluminium keyrings, which are formed like a bone for the xTool F1 and xTool F1 Lite. It can hold up to 5 keyrings. Fold them with the connecting ring at the top.

Downloads
223
Likes
29
Rating
0
P
PrintablesMetti

IKEA BESTA hole pattern drilling jig

I designed this drilling jig to assemble my BESTA cabinet doors on a METOD cupboard. Align the end of the jig with the end of your cabinet (your cabinet door ends here). There is a triangular cutout to mark the middle of the hinge, so…

Downloads
217
Likes
31
Rating
4.75
P
Printablesfuchsr

Screw/Bolt Sizing Jig (Remix)

Simple remix of WillLyon's sizing jig . Instead of embossing numbers and tick marks, I raised them. This way you can use filament change to give them a different color. I also include an STL file that combines imperial and metric into one…

Downloads
179
Likes
26
Rating
4
P
PrintablesStrandedOrg

Pocket Hole Jig

Pocket hole jig for a 3/8th inch (~10 mm) drill bit. It is parametric so it can be scaled up or down to meet your needs. Kreg Pocket Hole Jigs seems to be everywhere. How about we save a few bucks and print our own? Why use a jig? It…

Downloads
126
Likes
18
Rating
0
P
Printablesmaxmar

Miter Clamping Jig (Gehrungsleimhilfe)

This jig helps to clamp and glue miters at different angles (not only 45° angles). You need three clamps and two jigs to apply the jigs to one corner/miter. To prevent from slipping while clamping, I recommend to apply sand paper with…

Downloads
99
Likes
23
Rating
5
P
Printablesjrdn8056

Voron0 drill jig for aluminum extrusions

This is a model that I designed to help me make some custom aluminum extrusion pieces for a Voron 0.1 that I am building. While it was used for custom pieces, it could also be used to help you if you cut or source your own aluminum…

Downloads
94
Likes
16
Rating
0
P
PrintablesUTGolfGuy3D

3/4 Inch Scribe Jig

Scribe jig for 3/4 Inch material. For use in finish carpentry work. The print file is a batch of 4.

Downloads
70
Likes
6
Rating
0
P
Printablesgwendal

Shaper Workstation Inverted Jigsaw table

Inspired by the Festool CMS PS 300 module, parts to install the PS300 Jigsaw inverted and collect dust (barely) using a Festool Cleantec hose. The plate is a shaperhub project . In addition the model includes a connector to fix the plate…

Downloads
64
Likes
26
Rating
5
P
PrintablesLGworkshop

Vinyl Fencepost rail jigs and covers

When we built our house, we didn't think we'd need a gate in the privacy fence, but later changed our minds. My builder charges over $800 for a gate, and they use some proprietary rail sizes that I couldn't find anywhere. So I decided to…

Downloads
64
Likes
5
Rating
0
P
Printableshartzell

Tuya CB2S pogo pin jig

I needed something to make connections to the pads while I tried to flash a KMC Smart Tap Mini with OpenBK. It uses a Tuya CB2S module that's edge-mounted through the main circuit board. This jig can be held/clamped against the bit that…

Downloads
56
Likes
3
Rating
0
P
PrintablesJohn Kinsella

Rockler box jig dust collection funnel

Without dust collection, a router table is one very messy thing. When using Rockler's box joint jig , wood chips will go everywhere without something to suck them up. I decided this would be a good chance to try modeling a funnel shaped…

Downloads
56
Likes
16
Rating
0
P
PrintablesPocahontius

Stave drum angle cutting jig

Printable stave drum angle cutting jig. Parametric model for different drum sizes, miter channels, tool distances etc. This angle cutting jig was especially designed for stave drums in conjunction with a router table, but it can of course…

Downloads
52
Likes
14
Rating
0
P
PrintablesJeromy

2 Inch grinding jig guide

I made this tool for a friend that's into wood turning. It's used to set tool depth in a jig before it gets put to a grinding wheel for sharpening. Mainly to ensure consistency every time it's sharpened. This means less metal from the…

Downloads
48
Likes
6
Rating
0
P
Printablesjanek

90 degree edge sanding jig

All on one plate. Main body printed on side , bracket layed flat, both with tree supports. Hardware required: M5x60 hex bolt DIN912 x 2 M5 connecting nut DIN6334 x 2

Downloads
45
Likes
9
Rating
0
P
PrintablesMatthew Schultz

MJS.ART Art Tape Strip Cutting Jig

Another niche art item. While creating art I often need strips of tape that are exactly 1/16" or 1/8" or ¼" (etc.) wide. While I could pull out a cutting mat and a ruler to do it, I wanted a quicker, easier option. This simple jig has…

Downloads
42
Likes
11
Rating
0
P
Printablesr31joel

Architrave or Picture frame Biscuit Cutting Jig

Jig to cut groove for biscuits using a slotting blade in a laminate trimmer/router.

Downloads
39
Likes
18
Rating
0
P
PrintablesMarkus_94

Router jig 15° / Aufnahme Oberfräse 15°

Optimal mit einer externen Führungsschiene

Downloads
37
Likes
5
Rating
0
P
PrintablesBuildComics

Jigsaw Blade Holder

Uses neodymium magnets 5x12mm cylinder (optional) internally to mount it to any piece of steel (e.g. fridge?). It also inserts 6x12x3 mm bar neodymium magnets. There are pauses in the gcode for this. This allows you to keep your jigsaws…

Downloads
31
Likes
5
Rating
0
P
Printablesavolkov

Bosch 1617EVS 2x4 jig

This is a jig for Bosch 1617EVS fixed base plate to cut a grove in 2 “inch” side of 2x4 or 2x3, and by “2” “inches” I mean 38.5-ish mm. The max acceptable “2” “inch” side is 39mm. I gave the jig tolerance of 0.5mm which is a lot for a 3d…

Downloads
23
Likes
8
Rating
0
P
Printablessanderpaas

Rounding scribe /Square root jig

When rounding wooden square stock you usually go from a square to an octagonal. Measuring this can be hard, especially when there is a taper in the wood, as in mast making for boats, or round tapered legs for furniture. This jig is…

Downloads
22
Likes
3
Rating
0
P
Printablesbuchnema

Heart Stamp Jig for Toilet Paper Rolls

While looking for a nice craft idea for Mother's Day, we came across the common method of stamping hearts with toilet paper rolls. We really liked the idea because, unlike bought or 3D-printed stamps, all the stamped hearts look a little…

Downloads
16
Likes
8
Rating
0
P
PrintablesJeromy

2.5 inchgrinding jig guide

I made this tool for a friend that's into wood turning. It's used to set tool depth in a jig before it gets put to a grinding wheel for sharpening. Mainly to ensure consistency every time it's sharpened. This means less metal from the…

Downloads
12
Likes
0
Rating
0
P
PrintablesDan Rogers

Jigsaw Puzzle box lid - or - Getting poochie out of hot water

The jigsaw puzzle - A vintage puzzle from Cavallini & Co. - that I gave my wife for Christmas got some extra love from the dog, landing the dog in said doghouse. 3D printer to the rescue. Poochie is back on the good dog list.

Downloads
12
Likes
1
Rating
0
P
PrintablesLoboCNC

Filament Splicing Jig

This splicing jig makes quick work of joining filament ends. Use a soldering iron tip to melt the ends of the filament segments and then shove together for a perfectly aligned joint. Then clean up the joint with file, razor blade or…

Downloads
25,664
Likes
6,614
Rating
4.72
P
PrintablesArea51

Filament Splicing Jig (Remix)

Always wanted a simple tool for joining filament pieces together - when the spool runs low or to join DIY multi color filaments ( Easy Multi Color Filament ). I remixed LoboCNC's fine Filament Splicing Jig : Added compliant hinge to make…

Downloads
12,076
Likes
1,867
Rating
4.72
P
PrintablesHenry

Pocket hole jig

This is a pocket hole jig for drilling accurate pocket holes. It works as well as the Kreg jig and uses the Kreg drill bit and screws. For most woodworkers this will last for years without the metal sleeve used in the Kreg jig. The first…

Downloads
9,159
Likes
1,642
Rating
4.76
P
PrintablesGarage Maker

Ultimate router jig

This new baseplate allow mounting of several trim routers Tested with 65mm Makita Compatible with : Makita 3709 - 3710 - RT0700 - RT0701 Katsu Erbauer EPR710 Dewalt DCW600B, DWP611 & portercable 450 compact (2.4"x2.4") Ryobi (55x55mm)…

Downloads
8,992
Likes
1,401
Rating
4.88
P
PrintablesVC Design

Cable Soldering Jig Holder

Cable holder for soldering: 4 different cable sizes diameter 6, 5, 4 and 3 mm

Downloads
7,305
Likes
2,148
Rating
4.86
P
PrintablesSulya

RCM Jig and wire bending template for Nintendo Switch

Update 25th June: made the keyring hole a bit bigger, fixed issue with orientation: apparently the model was rotated a bit upon export to stl Description: Redesigned RCM jig, based on thing 2877484 but redesigned from scratch with…

Downloads
6,147
Likes
211
Rating
4.76
P
PrintablesJools

gridfinity magnet glue up jig

jig for gluing the tiny magnets to gridfinity organizers, so that you can easily get the magnets in the right place with the right orientation, without getting superglue on your fingers. For the stationary magnets, I used some 8mm magnets…

Downloads
6,003
Likes
1,147
Rating
4.97
P
Printableswerz 99

Drillbit Sharpening Jig for Dremel

Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…

Downloads
5,477
Likes
2,043
Rating
4.68
P
PrintablesAMTprojects

LED strip Soldering jigs

What it is Small soldering jigs for LED strips that allow to cut and fix the then stripped cables in place. With a dab of hotglue or some heat-shrink tubing it may even stay in place to secure the finished connection. How to print…

Downloads
3,807
Likes
2,808
Rating
4.92
P
PrintablesArea51

PTFE Tube Chamfer and Cut Jig

Simple jig for PTFE tube cutting (4mm OD), having: 60° (30), 90° (45) and 120° (60) degree chamfer tool (works like pencil sharpener) Length of 13, 15, 19, 35.3, 38.8, 42.3, 43.4, 44.2, 50 and 66mm cutting tool Needed tools: Sharp blade…

Downloads
3,669
Likes
523
Rating
4.84
P
Printablesfunction.3d

Filament Splicing Jig (ReRemix)

I reduced the size of the hinge with respect to the original model. Also you need to download and print the clamp from the original model: https://www.printables.com/es/model/241692-filament-splicing-jig-remix The small tube is to prevent…

Downloads
3,662
Likes
391
Rating
4.75
P
Printablesbuchnema

Pipe Insulation / Lagging Cutting Jig

With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added…

Downloads
3,188
Likes
825
Rating
5

Compact Chisel Sharpening Jig

UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…

Downloads
3,112
Likes
1,423
Rating
5
P
Printableskristianmedk

Makita Router Circle Jig (RT0700CX4)

24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware

Downloads
2,931
Likes
526
Rating
4.94
P
Printablespoulanker

Perpendicular Drilling Jig (universal)

NOTE! I have made a remix of this design, incorporating fixes and new features. You can find the new model here: https://www.printables.com/model/649321-universal-drilling-jig-for-perpendicular-drilling…

Downloads
2,715
Likes
1,693
Rating
4.73
P
PrintablesSoftware2

Gridfinity Pressure Fit Magnet Jig

Lots of Gridfinity designs don't require glue, they just require a hammer to force the magnet in place. This is a simple jig that will align a magnet perfectly in place, and always in the right polarity. The other end is rounded to make…

Downloads
2,532
Likes
429
Rating
4.89
P
PrintablesUniversalMaker

Ultimate Soldering Jig Set (durable)

Features: A big Jig for big wires A middle Jig for normal wires (Can be stored inside the big Jig) A tiny Jig for soldering in very small places Sizing: You can sie down the SolderHelperSmall + SolderHelper Big to ~70% if you work with…

Downloads
2,532
Likes
877
Rating
4.91
P
PrintablesWarlogh

Corner Radius Jig with changeable Radius Inserts Metric and Imperial

Modular Corner Jig with option of changing corner Radius Inserts. How it works? Very simple! Just choose insert with needed Radius, put it together with Main Jig Body and secure the insert with a Lock screw. Main Body has a threaded hole…

Downloads
2,519
Likes
592
Rating
4.89
P
PrintablesPEU

Jig Saw Handle

Jig saw handle Fits perfectly to Bosch blades Secured manipulation with screw tightening ring Solid rounded handle All parts are fully printable, painted some supports for the handle, but without them it should print fine too. The handle…

Downloads
2,518
Likes
837
Rating
4.93
P
PrintableswithanHdammit

10mm LED soldering jig

Needed to solder some LEDs and didn't have three hands so I sketched this up in F360, works great! Made a three pin, a 90° three pin, and a four pin. Update 2024-01-04 Added version 2 of the 3pin jig with a shorter length Added version 2…

Downloads
2,403
Likes
1,261
Rating
5
P
PrintablesGarage Maker

MFT Table Jig

When you want to replace or build an new MFT workbench top or a DIY, you need to be precise, so I share two templates and a calibration solution. The jig for the corners allows to start the first 4 holes in a corner of a 19mm (3/4") board…

Downloads
2,386
Likes
225
Rating
0
P
PrintablesRod

Zipper Slider Jig

A jig to hold a zipper slide while threading bulk zipper tape through the slide. There are two options, with and without a weighted base. Fusion 360 file included for your convenience. Note: the weight cavity and weight filling hole…

Downloads
2,216
Likes
317
Rating
4.92
P
PrintablesDSkolnik

U-scribe jig set - Metric and Inch

U-scribe jig set for for all common thicknesses. Metric: 12 - 14 - 16 - 18 - 19 - 20 - 22 - 24 Inch: 1/2 - 5/8 - 11/16 - 3/4 Added STP file for your own customization ! 10.9.2024 Added 19mm on demand.

Downloads
2,209
Likes
163
Rating
4.83
P
Printablestham

Corner radius router jig with changeable inserts - Clampable

Corner radius router jig with changeable inserts. Can be clamped to the work piece to use with a handheld router. The base is design to accommodate track saw clamps (slots for the clamps are 12mm wide, 7.5mm deep) Inserts are available in…

Downloads
2,061
Likes
742
Rating
4.96
P
PrintablesEON

Wafer Jiggler - Lock Pick

This tool integrates the tensioner, allowing one to open low security locks without needing a separate tensioning tool. 1mm or 1.4mm thickness Print with 6 walls (part should be solid, 100% infill) Use IRONING feature in slicer to smooth…

Downloads
2,047
Likes
440
Rating
4.09
P
PrintablesMateusz Tokarz

18mm L-Corner Assembly Jig | Cabinet Clamp

BOM: Printed with ROSA3D Starter PLA Red Make your DIY furniture building and cabinet assembly much easier with this precise 90-degree L-corner jig. Designed specifically for standard 18mm thick boards—the most common size used in…

Downloads
2,032
Likes
709
Rating
4.67
P
PrintablesMehStrongBadMeh

Steam Deck Repair Jig Fixed

A functional replica of the Steam Deck Repair jig seen in Valve's Steam Deck Teardown Video . Handy for keeping the Deck stable while upgrading the internal SSD or replacing drifting thumbstick modules. This is a remix of ryohazuki224's…

Downloads
1,958
Likes
329
Rating
4.93
P
PrintablesCalebTimoteo

JigglyPuff - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Downloads
1,892
Likes
613
Rating
4.25
P
PrintablesLeapTechOnline

Pipe Lagging Insulation - Template Jig - Cutter - 15mm 22mm 28mm

A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…

Downloads
1,871
Likes
642
Rating
5
P
PrintablesDarin M

Jigsaw blade case

I designed this case to hold a 50-piece set of assorted jigsaw blades I bought on Amazon. They came individually wrapped in plastic and in a single compartment case but that made it difficult to find the ones I wanted. With this case I…

Downloads
1,818
Likes
779
Rating
4.81
P
Printablescbearman

MGN12 Alignment jig for 2020 and 3030 extrusions

Very simple alignment gauge for mounting an MGN12 on a 2020 or 3030 extrusion. Will work on any 20mm or 30mm T slot extrusion face. Put the linear rail on the extrusion with bolts fitted, place a few of these over the rail / extrusion and…

Downloads
1,809
Likes
86
Rating
4.83
P
PrintablesPGold

HINGE DRILL JIG

I was not satisfied using a Chinese made jig for drilling door hinges (35mm diameter holes) due to the size and options I don't need. Keeping its principle I change it to accommodate needs of an average woodworking enthusiastic. Printed…

Downloads
1,693
Likes
337
Rating
4.91
P
PrintablesMateusz Tokarz

18mm T-Joint Assembly Jig | Cabinet Clamp

BOM: Printed with ROSA3D Starter PLA Red Expand your 3D-printed woodworking toolkit! Following our popular L-corner jig, this precise T-joint assembly jig is designed to help you flawlessly connect intersecting standard 18mm boards at a…

Downloads
1,659
Likes
698
Rating
5
P
PrintablesNordheim

Router Corner Jig Modular

I find the original design really good but did a remix to add some features. I simplified the slots for the clamps to be square to fit my Metabo clamps. The Jig now also prints without supports. I made the Jig Modular so I do not have to…

Downloads
1,588
Likes
351
Rating
4.92
P
PrintablesBuildModHack

Corner Radius Jig Router Templates, Router Templates for Woodworking 7 Pcs Set

(Buy me a coffee if they are useful to you thanks :-) Tip Me Here 7 Pcs Set Radius Jig Router Templates, Router Templates for Woodworking "Only 6 in the photo but you will get 7 files" Corner radius jigs allow for easy and repeatable…

Downloads
1,588
Likes
339
Rating
4.82
P
PrintablesWoodenti

Thin Rip Jig for table saw (DeWalt 7492)

How to use the jig: 1) set the slider to the desired thickness 2) set it slightly before the blade 3) move the parallel guide until the wood touches the bearing, then fix it in position 4) perform the cut 5) repeat step 3) and 4)…

Downloads
1,562
Likes
455
Rating
5
P
PrintablesSteve 3d

Jigsaw Hoodie Beads

These beads lock the cords together on your hoodie or any other cord that will fit in a 4 mm or 5 mm hole 0.2 layer height with or without support Made in Inkscape and Blender

Downloads
1,559
Likes
860
Rating
5
P
PrintablesAhmad

Nintendo Switch RCM Jig

Credit to original creator: https://www.thingiverse.com/thing:4095790

Downloads
1,519
Likes
61
Rating
4.6
P
PrintablesRichiH

Jigsaw saw blade holder (Bosch, Festool, Ryobi, DeWalt, Makita, etc)

A set of saw blade holders for all common electrical jigsaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting…

Downloads
1,491
Likes
497
Rating
4.94
P
PrintablesMcClean

XTOOL F1 - Stift + Kugelschreiber-Einlage / pen inlay / jig

For engraving up to 11 pens or ballpoint pens simultaneously with the xTool F1. A placement map for xTool Creative Space is also available. Update: The placement map file has been updated for xTool Creative Space 2.x, including grouped…

Downloads
1,490
Likes
138
Rating
5
P
PrintablesLaisch

Router Radius Jig (R5,10,15,20,25,30)

Router Radius Jig / Template with mountable holder R5, R10, R15, R20, R25, R30 Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Infill: 40% Category: Hand Tools

Downloads
1,478
Likes
457
Rating
4.95
P
PrintablesWarlogh

Corner Radius Jigs Router Template

02.04.2024 Big Update on and Attention about Model I Have to apologize as I discovered that I have made a big unforgivable mistake on this model. Mess up with Radius sizes took a place. So please if you have downloaded this model before…

Downloads
1,451
Likes
367
Rating
4.86
P
PrintablesGuido666

Billy The Doll From Saw/Jigsaw - Mask!

A remix of the original "Billy The Doll From Saw/Jigsaw" head, to make a Halloween mask. I hollowed the head, cut the back of the head off, and put holes in the eyes. I printed at 115% to fit my face. This was also max size to fit on the…

Downloads
1,450
Likes
218
Rating
4.57
P
PrintablesFreshPrints

Hotend PTFE Cutter Cutting Jig For Anycubic Kobra 2 Max Kobra 2 Pro Kobra 2 Neo Kobra 2 Plus Kobra 2 Also Included Universal PTFE Cutter

Cut a new PTFE tube for your Kobra 2 Serie Printer with confidence. Already premeasured just insert and cut. Note: This is the correct length from factory. If after you cut PTFE tube and you insert, and it appears to long. You will need…

Downloads
1,426
Likes
234
Rating
5
P
PrintablesIvan Yovchev

Woodworking Knobs for Jigs

In the woodwork shop we often need knobs to finish some Jigs. They can be very expensive so I dicided to print them on my Bambulab A1 3D printer. Aded metric M4 Bolt or Nut with 3 diferent diameters of the body - D20 , D 25 , D 30 Aded…

Downloads
1,424
Likes
678
Rating
4.67
P
PrintablesPhil

Honeycomb Storage Wall: Drilling Jig

I'm just starting to mount my Honeycomb Storage Wall. I wanted a way to easily drill a hole that's centered in the hex for the mounting screw. This drilling jig is meant to go into the cell that needs a screw hole to be drilled, you drill…

Downloads
1,418
Likes
434
Rating
5
P
Printablesmarkury

Easy Assembly Jig for Iris Compass

Use this jig to center and round out the center of the iris compass circle drawing tool. This made assembly go from irritating to slightly less irritating, but still tedious. The reason it's so tall is so that the leaves do not…

Downloads
1,375
Likes
112
Rating
4.81
P

Microjig Matchfit Dovetail Fixture Bits + Knobs

The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…

Downloads
1,350
Likes
279
Rating
4.75
P
Printableslewosh

Adjustment Jig for DeWalt Table Saw DWE7492

I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…

Downloads
1,319
Likes
280
Rating
4.75
P
Printablesdandos23

DeWalt Jigsaw DCS331

This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…

Downloads
1,295
Likes
218
Rating
5
P
PrintablesDodoIsAlive

XTool F1 Business Card Plate / Jig

This business card plate holds metal business cards in place for the Xtool F1 laser… Works with all metal business cards including the very thick 2mm+. (Most cards are 0.25 / 0.45 / 0.8mm). So, I got you covered! Note: > You can print…

Downloads
1,290
Likes
143
Rating
5
P
PrintablesPyrex

AR15 Receiver Engraving Jig for X-Carve CNC

This is a quick jig i made to hold an AR15 level for engraving. It has been designed with mounting points 75mm on center to match an X-Carve CNC wasteboard. Two of the M5 thumbscrews are used to secure the jig, the third M5 thumbscrew…

Downloads
1,286
Likes
210
Rating
5
P
PrintablesMottN

3D Ski Binding Jig

*I also make these to order if you don't have a 3d printer. My cost to cover time and materials is $65 for a jig and hardware and $20 per set of templates (with inserts). Shipping within the US is usually around $15. Send me a message…

Downloads
1,261
Likes
159
Rating
4.93
P
PrintablesWillyCi

Filament Splicing Jig welder join

This is a remix, I added Bowden PTFE Tubing on one end, after heating up both filament ends with iron, then push filament into the Bowden tubing, it makes the join smooth, and the right size. ----------------------------- This splicing…

Downloads
1,259
Likes
124
Rating
4.75
P
PrintablesJakub Gon

Drilling Jig 45°/ 90°

Various holes for drilling different diameters (5–12 mm) Guides for accurate 90° and 45° drilling Integrated ruler (115 mm) for precise alignment Labeled hole sizes for easy identification Units: Metric millimeters (mm) Built-in grooves…

Downloads
1,250
Likes
415
Rating
5

Better Chisel Sharpening Jig

This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…

Downloads
1,244
Likes
242
Rating
4.75
P
PrintablesELVISART

Jigglypuff Rondoudou HD

More model on instagram: https://www.instagram.com/elvisart08/

Downloads
1,226
Likes
65
Rating
5
P
PrintablesTonyB

Silicone Tube Leveling Jig for Sovol SV06 Heatbed

This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…

Downloads
1,211
Likes
110
Rating
4.96
P
Printablessilpstream

Drill and Tap Jig for 2020, 2040 and 4040 v-slot extrusions

A jig to drilling holes for blind joints in v-slot extrusions as well as for tapping the ends of the extrusions. I use it when drilling and tapping the holes for 3D printer builds. There are 2 jigs. drill_tap_jig - This is used to tap the…

Downloads
1,194
Likes
406
Rating
5
P
PrintablesJamie Saunders

Jigsaw Puzzle Chess Board

This model takes a different twist on the traditional chess board by making it into a jigsaw puzzle. Each individual chess square is an individual puzzle piece, which can be slotted together underneath to keep a regular checkered top.…

Downloads
1,178
Likes
181
Rating
4
P
PrintablesMartin Wirtz

Laser Pen Jig

This is a jig to engrave up to 10 pens with your laser. I also add a jpeg to use as background for your laser software.

Downloads
1,160
Likes
80
Rating
5
P
PrintablesMaverick Ng

Voron 2.4 extrusion jig

This model is a simple jig to help align the bottom extrusions to each other and the vertical extrusion.

Downloads
1,151
Likes
223
Rating
5

Screw Sizer - metric screws nuts bolts measure jig

Screw sizer With this instrument it is possible to measure the diameter and length of screws, in metric pitch. It works for both countersunk screws and flat head screws. The shape of the object is flat so as to take up very little space.…

Downloads
1,149
Likes
164
Rating
4.9
P
PrintablesDJMac

Monkey Fist Jig Remix

I liked the original design from entomophjle (https://www.thingiverse.com/thing:594693) in how simple this was to print the base, versus other designs for a paracord monkey fist jig, but the dowels were not easily printable on their sides…

Downloads
1,142
Likes
152
Rating
4.88
P
Printableslewosh

Cabinet Hardware Jig

This jig is strongly inspired by the jig of the well known blue colored jig brand. Although they have the same properties, they are not compatible. This jig has built-in measuring scales and a adjustable edge guide for easy positioning.…

Downloads
1,136
Likes
391
Rating
4.67
P
PrintablesRH3D

GT2 belt jig - DIY closed loop belts

Simple jig for making your own closed loop gt2 belts. This is quite simple method - probably not the best but I have tested it many times and I have belts made with this method in use for few months now without issues. Still use it at…

Downloads
1,127
Likes
175
Rating
4.94