3,416 models
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Video link: https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html This is a 3 x 3 inch square used to help calibrate that oh so important first layer. This seems to be one of the most problematic asked about questions…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
This is a two handed sword for Dummy 13 inspired by the Dragon Slayer sword from Berserk. It is about 140x16mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out MattoDesign's…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I made this model based on my fiancee's ACNH house. I scaled it to fill a i3, but printed it myself at 50% scale. The only issue with that size was the door nob breaking off. Broken into different parts so they can be printed in different…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Optimized for printing in colored 0.2mm layers: Layers 1~3 Grey Layers 4~6 White Layers 7~9 Red Layers 10~12 Black 70mm in length, the most common size from retailer versions. Sized to fit common earring hardware. Keychain versions also…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
This is a slim, simlpe Player Board for Oathsworn: Into the Deepwood. It keeps cards, cubes, tokens and animus in place. There are two versions: One with slots for tokens and one without. I prefer a clean design without token slots.…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Set of 4 stackable coasters that look like a records on a record player. I added personalized text on top of the “Record Centers” file when I printed it so I could give it as a gift! I used super glue to glue the knobs, feet and other…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
Player board for the Dune Imperium board game inspired by the Shai Hulud mural from the movie. Presented are two 3d models, the smaller one is perfectly sized for the Prusa mini which I own, and the bigger one with extra spaces for the…
MetiKoro is a strategic board game for 2–4 players. This 3D-printable game is thoughtfully designed to be easy to learn while offering deep strategic gameplay, completely free of random elements. Update 2025-01-21: Added a large board…
The Height Z Layer Shift Test is designed to verify that there are no layer shifts, ensuring stability and accuracy before attempting a model that utilizes the maximum Z height of the printer. Print settings Nozzle size 0.4 / 0.6 Layer…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
For a game SETI from CGE, you need to print this box 4 times. You need to slide a sleeved card into a box to use it as a cover. Or print your own card (you cand find inside this).
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
Start by following the steps/using the original gcode from jkoether : https://www.printables.com/model/360303-auto-incrementing-first-layer-calibration . Once you have chosen the best live-z setting using his original gcode, then use the…
Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Use min 50% infill or light are gonna light through wall I use lights with usb cable for best effect like it's glowing obviously, just round about walls and you are done Maybe you can use lighter and do little burn marks for effect but i…
Inspiration: When printing @SH -s 🍂 Organic leaves set I realized that his Round Scraper just needed a bit longer “skirt” to help me out. So Egg Shaped Scraper was born. Just try these leaves from here:…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Simple first layer calibration
The insert can fit all the different game pieces from the base game as well as both of the expansions into the base game box. The insert have enough space to hold 5 of your most favorite characters and there is a small separate “box” for…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Stand for this model: https://www.printables.com/pl/model/190328-terraforming-mars-player-astronaut-track-token/files
Introducing our Prusa MK3S+ First Layer Test Sheet – the ultimate diagnostic tool designed to put your 3D printer through its paces. Crafted with precision and expertise, this flat sheet is your go-to solution for evaluating every aspect…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
2D Teddy Bear wall art with colour change layers. Gcode is for SV06 PRINT SETTINGS .2mm first layer .1mm layers Colour Changes start - white .70 – Dark Brown 1.3 – Tan 1.9 – pink 2.5 - black 100% infill To keep my models free, Please LIKE…
Design Tuning the first layer is challenging at times! Once you manage to level the bed, adjust nozzle distance it looks nice and works as it should. But is it really the thickness it should be? Will the overall height of your print be on…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
About Tock The Ultimate 3D-Printable Board Game for Family Fun Are you searching for a unique, engaging, and genuinely useful 3D printing project? This is a complete, 3D-printable Tock board game that provides hours of fun for the whole…
A cutter for two layer cookies.
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
To have all top surfaces of the model be at their intended height, you must either use 0.1mm layers everywhere (except 1st layer), or you can use 0.3mm layers with thin layers only where needed to get the correct top layer heights. Using…
🏆 World Cup 1998 ⚽ 🇲🇽 Mexico The ABA jersey for Mexico in 1998 featured the Aztec Sun Stone (Tonatiuh). It has been taken as inspiration for the 2026 jersey by Adidas. It's very easy to print in colors, even without MMU/AMS. Order of…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Holds cell phone while charging, securely in CD slot. Tested in Ford cars and Trucks. Print in PETG or ABS - as the summer sun will melt PLA. Default settings but turn on thick bridges. Pictures show .3 layer height draft mode print. Note…
Print approx. €2.66–€3.26 excl. taxPreliminary estimate for PETGSource material: PET
Some people may not realize but the bed level test calibration that comes with the printer is only supposed to be used with 0.4mm nozzle. Other sized nozzles the recommended is to print a square/rectangle with half the diameter of the…
Sony Sports Walkman : Cassette Player 2 hinges. 3 walkman parts !!! Will probably need to trim down edges of hinges on lid or back. Needed to do some offsets post production and forgot to recalibrate the hinges… bit of sanding should…
Print approx. €12.93–€15.80 excl. taxPreliminary estimate for one variant
Test your bedlever calibration printing this fantastic f1 track. Rotate, scale, change infill method first layer and test it. Have fun
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
este modelo es un conducto de aire para la ender 3 con un ventilador mejorado. *este modelo necesita un pequeño soporte *tener en cuenta las tolerancias.
This should print just fine on a prusa mini or larger. Print 4 of these boards and lay them oiut to make an octogon. Chess starting positions are on the split sides. of the octogon. Print cehss or checkers pieces at .5" in diameter at…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant
Print Instruction Remove top layer Infill 0% At least 2 perimeters layer height 0,15 or 0,2 mm
OVERVIEW A customisable storage device which can have as many rotating layers as you require, simply print another layer and add it to the stack with the snap joint and voila! The one I printed is at 50% scale as I didn't have enough…
Have you printed something and couldn't get it off the bed? Worry no more! With Layer Lifter, you can print your own spatula quickly and easily. Designed to be ergonomic, practical and resistant, this tool will help you peel off your…
A versatile and customizable modular shelf system is designed to highlight and organize all your projects. Perfect for creators, hobbyists, and professionals alike, it offers an elegant solution to display your work. Each module can be…
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
Parametric OpenSCAD file for Layer Height Tool generation. Pay attention to your printer's first layer height. (Most print a thinner first layer.)
This is First layer test for the Original Prusa XL Single Tool 360 X 360 X 0.2 MM Available for Gcodes for PLA & PETG
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
Layered Catchall Bowl is a sculptural storage tray inspired by layered landscapes and natural terrain. The stepped, flowing edges create a calm, topographic feel while clearly revealing the layered structure of the form. Designed for…
Print approx. €6.96–€8.51 excl. taxPreliminary estimate for one variant
This foosdummy is standard size with an attach fitting sized for a 5/8-inch diameter foosball table rod. There is also a hole that fits a 3 mm diameter fastener for securing to the rod. Height dimensions are 4.21 inch total height with…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for PETGSource material: PET
Added the 3mf file with tool/color changes I have a 5 tools XL printer and I'm not afraid to use it! ;-)
Print approx. €8.12–€9.92 excl. taxPreliminary estimate for PETGSource material: PET
Some nice tile art of my favorite marvel heroes . Gcode attached for color swap or details below iron man : red - 3.40 mm black - 3.60 - 5.40 mm gold - 5.60 - 6.80 mm white - 7mn captain america: white - 3.00 mm blue - 3.20 - 4.20…
Print approx. €4.70–€5.74 excl. taxPreliminary estimate for one variant
Do you ever forget whose turn it is to roll the dice in Dungeons, Dice & Danger? This simple player token is the perfect solution! Just place it in front of the player who rolled last, and you'll never be lost again. The token is small…
Simple desktop stands for Tangara music player. Taller has a slot for USB-C cable for charging the device while you play music. You can easily decorate the taller one with for example guitar pick like seen in the photos - check my other…
Pressure advance needs to be set differently on the first layer than other layers because of the "squish". Adapative pressure advance settings currently don't allow this. If the wrong settings are used then bed adhesion is extremely poor…
An optic illusion Easter egg with an low poly heart inside. A Multicolour printer is required. Simple as that. Enjoy.
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
I have a couple of Original Prusas so I'm very used to do first layer calibration with pattern available on the firmware, so when I built a MK2 using Marlin on RAMPS I wanted to use the same tool for calibration, so thanks @jonnieZG for…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Oktoberfest Bavarian Stammtisch sign in 3 colours/layers. Holes for mounting. Layer/colour changes built in. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating…
Hello, Here I like to share my Multicolor Card “Ballern (Bicycle)” (which means something like “full steam ahaed” :) ), all on one layer, with several Filament-Changes on same layer look at the reference picture to match the original…
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
Large and Small Heart Layered Fidgets 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Dimensions of Large Heart Layered Fidget: 4in x 4in x 7/8in Dimensions of Small Heart Layered Fidget: 2 3/8in. X 2 3/8in. X 7/8in.…
Gardening just got fun with this cute little carrot patch 🥕🥕 Plant it on your desk, coffee table or anywhere else that needs a little touch of spring. I have included the following digital files: (1) Big Carrot (2) Small Carrot (3) Bed of…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a…
A very simple test of your first layer
These layered fidgets are hard to put down:) I have included 4 files to choose from: (1) Small pumpkin layered fidget with cut-out facial features (supports needed) (2) Small pumpkin layered fidget no supports needed (facial features not…
Print at 0.3mm layer height. Print without supports. You should be able to see the strings in your slicer preview If using Bambu Studio make sure your wall generator is set to Arachne. See a video of the artwork here:…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Simple single layer cube to help you tweak your z offset. Print at .2mm Layer height Scale X,Y, if you want it to cover more of the build plate
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
This is a simple 70mm x 70mm first layer test & adjust print.* .3mf files included for PLA, PETG & ABS BEFORE PRINTING THIS: Please consider - -Your build plate and print nozzle are clean -Follow your printer manufacturer's methods bed…
I needed a better way to configure my first layer. I use this print to do live z adjustments. Print instructions I find this to be a good test. it handles allot of the shapes that will ruin a print of the first layer does not have a good…
Small and Large Apple Layered Fidgets 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great No supports needed, print in place 15-20% Infill Dimensions of Large Apple Layered Fidget: 4.5in x 4in x 7/8in Dimensions of Small Apple Layered…
These baby chick and egg layered fidgets are the perfect little additions to any Easter basket 🐣 I have included the following STL files for printing: (1) Baby Chick Layered Fidget (2) Round Egg Layered Fidget 3D PRINTING SETTINGS Layer…
Trying to stay organized as you explore and conquer Catan? Unsatisfied with the wasted space on the factory inserts and having to store everything in multiple boxes? Try these inserts designed to make setup, play, and storage a little…
10/9/22: Permissions on the Google sheet have changed to view only so once you open up the link, please make a copy for yourself! Also i would advise you to take a screen shot of your original settings if they are currently working for…
Berserk: Dragonslayer "That thing was too big to be called a sword. Too big, too thick, too heavy, and too rough, it was more like a large hunk of iron." Inspired by Kentaro Miura's Berserk I created this model in OnShape using the…
Update 9-11-2022: Added a version for 0.8mm nozzles. Tick marks of the old version didn't print correctly with a 0.8mm nozzle. Update 1-20-2022: Added a PDF file with a template, to write down the Live Z values used in the calibration.…
This is a Calibration Matrix for the Prusa Mini to calibrate the first layer. It consists of 15x15mm squares that are 0.2mm tall. The Squares are layed out into a 4x4 Matrix and are printed sequentially starting form the front on the…
DISCLAIMER: Use at your own risk! Not responsible for damage to your printer or accessories! Important: Always restart your printer after using this file! This file uses the G92 command, which changes your printer offsets. These offsets…
This is a simple project containing 6 models of different sizes for testing how level your bed is. The models are 1 layer thick and in some common print bed sizes. You can always resize as needed, too. Enjoy!
A printable 3-layer foldable gift/money/message/postcard/foto envelope. Once printed, fold them around what you want to give and close with the printed lip. * For a version with an added rose or heart as decoration (also without text) see…
Print and live adjust Z on the markers, you can start with larger increments (100, or 50) and then fine tune with smaller ones (10) when you are closer to your target.
UPDATE: Complete with Mindflyer and 2 figure stands. A 22-piece stand for the popular Stranger Things figures, with the logo in the middle.A 22-piece stand for the popular Stranger Things figures, with the logo in the middle. PLA 0.2…
I created a first layer test for myself after the prusa got a new heater block. It has the shape of an octagon, and so I can now calibrate the first layer nicely. Always only benchys or cubes print after a repair I did not want. The print…
This is a first layer calibration test for any printer. It consists of 5 identical tiles. Recommended print settings layer height: 0.2 mm fill angle: 0° perimeters: 2 skirt: 0 first layer speed: 25 mm/s It should be centered on the bed…
The organizer includes the following components: 4 player boards (identical models except for using different letters: D, U, N, E) These can be printed in different colors, using a color swap to make the iconography more visible. Inspired…
Popsicle Layered Fidget Toy 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Supports needed. Print in place. Dimensions of Popsicle: 2.75 in. X 5.5 in. x .75 in. I do not recommend scaling the print smaller due to…
Simple print for calibrating the first layer and bed leveling. Designed for 0.2 mm first layer but can easily be adapted
first layer calibration 21x21cm if your printer is corecly calibrated this should look like foil. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: fiberlogy PETG blue…
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
This is a 4 x 4 inch square used to help calibrate that important first layer.
Updated Jan 3rd 2022: Now has tabs to allow travel farther to the sides, makes it easier to write on the values (added on both sides for righties and lefties). Also splits the grid into 4 distinct sections. Added 3mf and gcode for PC…
Centauri Carbon First Layer Test to make sure your first layer is up to standard. The 3MF file is already set in the print bed, so you don't need to adjust it.
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Elegoo Neptune 3 Max First Layer Calibration Test Just slice and print as aligned!
The player character from Factorio is ready for printing. It shares the same scale as all other official Factorio models. You can pick from four different poses with a backpack and five without. Variants with backpacks are in two parts…
You downloaded it? Please like :) It doesn't cost anything and it encourages me to implement more projects :) FIRST LAYER (layer 0,2mm and squares 20x20 mm) size: 100x100 150x150 180x180 200x200 210x210 235x235 256x256 300x300 320x320…
Fits all Neptune 4 variants. This fan-mod targets to provide better cooling then stock while sticking loosly to the stock design language while integrating 2x 5015 Fans and 1x4015 Fan. There is a PDF with assembly instructions. It also…
A 3D model of the famous Hanafuda earrings wore by Tanjiro in Demon Slayer. I've decided to make my own model since those I found around are difficult to 3D print in multi-color in a single piece (they work flawlessly with the new color…
![First Layer Calibration Pattern [from Prusa MK3/MK3S firmware] for *Non Prusa Firmware*](https://media.printables.com/media/prints/575264/images/4597975_7ff1d44e-c928-48df-8894-60c77bd012c9/whatsapp-image-2023-09-06-at-144700.jpeg)
