Search results: mera

Sort order

12,508 models

P
Printablesturbi40

Trivenger Boomerang

The Trivenger is a very acurate and easy to thorw boomerang. The flight is very stable, with a fairly high trajectory. The bommerang brakes very well on the return which allows it to be easily caught, even with a finger. If you are…

Downloads
41,748
Likes
7,877
Rating
4.85
P
PrintablesMartin Rigatoni

Indoor Boomerang - aka Roomerang

This very simple boomerang is only two layers thick and uses less than 5 grams of filament. If thrown correctly, it will fly around a two meter wide circle and come back to your hands! Printing and post processing: Print it at 0.2 mm…

Downloads
15,158
Likes
2,177
Rating
4.8
P
Printablesmkoistinen

Flexi-Arm Camera Mount

I needed a method of connecting a "webcam" to my printer for remote monitoring from around the house via Octoprint. So, this comes in a couple pieces: A connector that snaps to the 30x30 extrusion frame (Y-axis on Prusa, and possibly…

Downloads
5,710
Likes
867
Rating
4.67
P
PrintablesJSund

Camera mount for Prusa i3 MK3/MK3S

Camera mount that attaches to the aluminium extrusion of the frame of the Prusa i3 MK3/MK3S. The mount should fit any webcam with a 1/4" tripod mount by using a 1/4"-20 screw. The clip might interfere with the Y carriage bearing if…

Downloads
5,268
Likes
640
Rating
4.75
P
Printablesej.garner118

Tri-Wing Boomerang

The Tri-Wing Beach Frisbee is designed to provide a unique flying experience with its three airfoil-shaped wings. The innovative design not only adds a touch of style but also improves lift and stability during flight, making it perfect…

Downloads
3,628
Likes
1,093
Rating
4.86
P
Printablesoliverlopez

Action Camera Mount Base (GoPro-style, import this into your project)

This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…

Downloads
3,012
Likes
188
Rating
5
P
PrintablesGuZZLo

Prusa Boomerang

A boomerang for your entertainment. Print instructions Throwing instructions Hold it between your thumb and index finger. Tilt it about 45 degrees outward from your body. Throw it against the wind.

Downloads
2,737
Likes
251
Rating
4.65
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Downloads
2,669
Likes
521
Rating
4.82
P
PrintablesLapjoint

"Red Oak" Boomerang

This boomerang design has become an instant favorite. I modeled it after a wooden boomerang that I made a while ago, which happens to be made from quarter sawn oak and it is dyed red, hence the name. It takes a good hard throw, and then…

Downloads
2,622
Likes
234
Rating
4.87
P
PrintablesLeon Matthews

Camera Tripod Bolt Collection UNC 1/4-20

Cameras are attached to tripods and such using bolts in the American Unified Thread Standard , specifically UNC 1/4-20. Historically, the more colourfully named British Standard Whitworth thread was used, but market forces in my…

Downloads
2,408
Likes
270
Rating
5
P
Printableslufa

1/4 inch nuts and bolts for camera and tripod

1/4 zoll Schrauben und Muttern für Kameras und Stative. Die langen Schrauben können mit FreeCAD auf die benötigte Länge gekürzt werden.

Downloads
2,189
Likes
325
Rating
4.64
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount

Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…

Downloads
2,107
Likes
685
Rating
4.81
P
PrintablesSeabird HH

Prusa Mini Raspberry Pi Camera Mount - by Clip-Fastening

The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…

Downloads
1,654
Likes
281
Rating
4.84
P
PrintablesReferentiel

Mera mera no mi

Original parts : https://www.myminifactory.com/object/3d-print-one-piece-mera-mera-no-mi-devil-s-fruit-53319

Downloads
1,453
Likes
180
Rating
4.71
P
Printablesdoroteo

MEDIUM FORMAT CAMERA - VERSION 2

I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…

Downloads
1,444
Likes
460
Rating
5
P
PrintablesDvG3DAtelier

Prusa Core One Buddy3D Camera Angle Mod – Better View, No Collision, Round Magnet Mount

I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…

Downloads
1,376
Likes
415
Rating
4.99
P
PrintablesSerial-Comma

Horizontal Chest Mount for Insta360 Cameras

Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…

Downloads
1,352
Likes
124
Rating
5
P
PrintablesKRENN DESIGN

Boomerang - Perfect Return

Boomerang - Perfect Return A simple yet precisely engineered boomerang designed for a flawless, consistent return. Features two variations—with and without an insert—allowing you to achieve a striking 3D visual effect on the front surface…

Downloads
1,247
Likes
143
Rating
5
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Downloads
1,179
Likes
287
Rating
4.97
P
PrintablesSeabird HH

Prusa MK3S Raspberry Pi Camera Mount - by Clip-Fastening

The mounting of this bracket is achieved by clip-fastening! The development of this camera mount was inspired by various mounts that can be found on Thingiverse. As it is, none of them was exactly what I had in mind. That's why I decided…

Downloads
1,103
Likes
162
Rating
4.97
P
PrintablesHD_Creator

Generic ball joints for camera mounts and other adjustments

For the articulated arm that holds the RaspberryPi camera on my Prusa Mini, I needed a way to fine adjust the viewing angle of the camera. So I opted to design a ball joint. I did a number of prototypes to try out how much the socket…

Downloads
1,101
Likes
109
Rating
5
P
Printablesdonb

Business Card Boomerang - VASE MODE

Whenever I got promotional cards, business cards, or even just a useless deck of cards lying around, I would always turn them into tiny boomerangs. But the problem I always had was always how quickly they would deform after a few throws,…

Downloads
1,066
Likes
285
Rating
4.73
P
PrintablesDIY Machines

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone.

3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…

Downloads
1,007
Likes
214
Rating
5
P
Printablesebeeche

Prusa MK4 camera mount for Logitech C270/C310

Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…

Downloads
891
Likes
203
Rating
4.76
P
PrintablesLebakas

Sliding Camera Cover for Laptops, Tesla, Tablets, Phones

This very fast print can be mounted over any selfie camera (mainly designed for Tesla interior cameras). If you use it for laptops, ensure that it does not damage your display (as the Slider is not flush with the housing. Be sure to print…

Downloads
867
Likes
98
Rating
4.8
P
PrintablesAndreas G

Boomerang for left and right handers

Boomerang for left and right handers … still improving the flight characteristics V1: 2023-03-02: V2 added

Downloads
865
Likes
124
Rating
5
P
PrintablesLilifee

Raspberry pi zero webcam (HQ camera)

Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…

Downloads
861
Likes
163
Rating
4.75
P
PrintablesM1Designs

Camera Lens Cap 58mm

Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…

Downloads
846
Likes
52
Rating
4.5
P
Printablesjebowenag79

Q-20 Camera Mount to 1/2 inch PVC Pipe Clamp

Q-20 Camera Mount to 1/2 inch PVC Pipe Clamp This clamp allows mounting a camera or other device onto a nominal 1/2 inch (outside diameter) PVC pipe, widely available in the US. For the camera end, use a quarter-20 threaded bolt, widely…

Downloads
821
Likes
59
Rating
0
P
Printables3D KIMBA

CMF RIG PRO – Magnetic Camera Cage for CMF Phone 2 PRO

After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…

Downloads
786
Likes
708
Rating
5
P
PrintablesBasementLAB

Gopro Action Camera Extension Mounts - Estensione per Gopro

Gopro Action Camera Extension Mounts - Estensione per Gopro Type A Type B Type C (update 06/02/2025) Type D (update 04/06/2025 22/06/2026 Update 19/08/2026 Added GoPro_Ext B 300mm Suitable for: Resize to adjust dimensions All our designs…

Downloads
739
Likes
96
Rating
5
P
PrintablesmosuTech

Kobra 2 Pro/Plus/MAX C270 Camera mount

Logitech C270 mount for KOBRA 2 PRO/PLUS/MAX Updating Kobra 2 pro/plus/max to versions above 3.0.5 , it is possible to connect a USB camera and watch the printing process using Anycubic app . I found my old camera and created a mount for…

Downloads
705
Likes
74
Rating
5
P

iPhone Monitor Mount for Apple Continuity Camera

Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…

Downloads
610
Likes
29
Rating
5
P
PrintablesColin Alston

Simple Raspberry Pi HQ camera box

This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping around. To install the module carefully remove the rear focus adjustment ring. Screw the module down into the case with…

Downloads
594
Likes
39
Rating
4.75
P
Printables3d_print_it

Ender 3 S1 C270 mount / Kamerahalter für Ender 3S1 C270

Die montage an der rechten seite der X-Achse führt zu einem guten blick auf die Düse. Mounting on the right side of the X-axis results in a good view on the nozzle.

Downloads
576
Likes
84
Rating
4.86
P
PrintablesZurrie

Nikon fmount lens to MFT m43 camera body

Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye

Downloads
537
Likes
34
Rating
5
P
PrintablesHD_Creator

Mini foldable tripod for GoPro action cameras

This design is actually a bit of a spin-off from my tiny tripod ecosystem: https://www.prusaprinters.org/prints/37671-tiny-foldable-tripod-ecosystem-for-different-actio After I got my GoPro Hero8, I first added a GoPro specific part to…

Downloads
513
Likes
81
Rating
5
P

Real Bolts (For Articulating Raspberry Pi Camera Mount)

First up, the articulating camera mount is a great piece of design, the sheet number of remixes and additions that have been released shows how popular the design is. However, I have found that the printed threads on the nut and bolt for…

Downloads
487
Likes
112
Rating
4.59
P
PrintablesNathanK

Non-MagSafe IPhone Continuity Camera Mount for MacBook Pro

This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…

Downloads
461
Likes
42
Rating
3
P
PrintablesKid Printer

NVG camera mount for Tactical FAST helmet

Use the screw that came with the camera case. Push the back of the print into the slot and push the front firmly until it clicks and is securely in place. Use the lowest possible layer height and a wall count of 4 for best results (with…

Downloads
443
Likes
33
Rating
3
P
PrintablesTJL

Updated Generic Camera Mount for SV06 & SV06+

This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…

Downloads
441
Likes
75
Rating
5
P
Printablescrammers

Ring Stickup Camera Rain Hat

Just a little hat for the Ring Stickup camera. Simple to print. No support needed.

Downloads
439
Likes
50
Rating
5
P
Printablesbr4in

Raspberry Pi HQ Camera Mount for the Articulating Camera Mount

This is an adaptation of the camera back from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , inspired by and simplified from the Raspberry Pi Hi Quality Camera Case Adapter . I've adjusted the back plate of the…

Downloads
400
Likes
53
Rating
5
P
Printablesrudfaden

Raspberry Pi HQ Camera Case

I liked the mounting system created by Sneaks. But it did not fit my Raspberry HQ camera. i made this case to fit on the arm with the same ball system as the original case. I printed it in PETG. Its made to be a tighth fit with the…

Downloads
397
Likes
58
Rating
4.8
P
PrintablesJ4N

Lack enclosure Rasperry Camera HQ support

I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…

Downloads
385
Likes
54
Rating
4.75
P
PrintablesLapjoint

TF Mod Triblader Boomerang

This is called "TF Mod" because I carved the original out of a commercially available TriFly boomerang by Eric Darnell. I consider it a slightly more relaxed version of one of my first tribladers . The holes are intended to slow down the…

Downloads
385
Likes
24
Rating
5
P
PrintablesRosti

Ring 'Stick-Up' Camera Mount

This is a simple mount that provides a 10 degree down and 10 degree lateral off-set for a Ring Stick-Up Cam. The standard Ring mount allows limited direction adjustment via a ball joint. This mount compensates for this. It is useful if…

Downloads
374
Likes
36
Rating
0
P
PrintablesNDS RnD

Camera Protector for iPhone 13 Mini

The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…

Downloads
344
Likes
24
Rating
5
P
Printablessumit_basra

MagSafe iPhone Holder for Continuity Camera in macOS Ventura and iOS 16

I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook, but might fit other MacBooks. Here's the version that uses the MagSafe…

Downloads
326
Likes
131
Rating
5
P
PrintablesKhoi Pham

NC Miata Backup Camera Mount

This is a backup camera mount for an NC Miata with the Advanced Keyless Entry (AKE) package. It a derivative design originally posted by "kiddingme". It is designed around the Nakita backup camera and moment buttons available on Amazon.…

Downloads
320
Likes
17
Rating
0
P
PrintablesNick Esselman

Pi camera servo arm for octoprint

Notice: it's not only for the ender 3 v2 Model descriptions: arm rail mount for a aluminum extrusion (tested on ender 3 v2 extrusion) this one the just tall enough to peak over the ender 3 v2 bed height, this is around 10 cm and 12 cm…

Downloads
317
Likes
50
Rating
0
P
PrintablesKendall Unruh

Blink Mini Camera Mount for Ender 3 Max Neo

I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…

Downloads
298
Likes
58
Rating
5
P
PrintablesmoWerk

Birthday Cake Topper Numerals | Leckerli One Font Numbers

Leckerli One Font Cake Topper Numerals 4cm high numerals, easily scalable (150% = 6cm, 200% = 8cm, etc.) Use the mirrored versions in case you like to have your buildplate pattern on the front. Font licensing The font “ Leckerli One ” was…

Downloads
294
Likes
36
Rating
5
P
PrintablesNils Kal

Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System - mounted to standard painting rods

Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System mounted to standard sized painting poles - PET bottle as counterweight This is my mostly 3d printed stabilizer system. You can use it with cameras or cellphone…

Downloads
282
Likes
146
Rating
0
P
PrintablesTocxo

Articulated Security Camera

This is a model with an intermediate detail adjusted to the size of this piece.It is inspired by the camera of 3dfiti . It is a fully articulated camera, its design has been based on a classic street camera. Asembly video on my ig reel .…

Downloads
276
Likes
55
Rating
0
P
Printablesdym801

Cache griffe flash - Camera Hot Shoe Cover

Cache griffe flash - Camera Hot Shoe Cover

Downloads
267
Likes
12
Rating
0
P
PrintablesMichal Pešek

Camera wrist strap for Peak Design

Print settings Material : ASA 0.15mm layer height 4 perimeters 20 percent infill 10 top and bottom full layers supports needed Strap: 20mm backpack strap Note: licence is the same like original model.

Downloads
259
Likes
46
Rating
5
P
PrintablesFC2M3D

Cute Camera Keychain

Easy to make a cute Camera keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
248
Likes
40
Rating
5
P
PrintablesJardar

Sliding LACK GoPro-like camera mount

A camera mount that clamps around the leg of a LACK table and can be easily adjusted vertically by loosening/tightening the large screw. Fits GoPro accessories for adjustable camera angles. Can be used on any of the four legs by changing…

Downloads
243
Likes
63
Rating
5
P
PrintablesHeikit

Remix of Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles

Downloads
241
Likes
45
Rating
4.67
P
Printablesgimpelginster

Bird Watching Case for Raspberry Pi HQ Camera

MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…

Downloads
239
Likes
56
Rating
5
P
PrintablesThird Dimension

SG90 servo pan tilt camera platform stabilizer ring

This model is free. If you appreciate this model, please leave a download and a like! A simple ring for pan tilt sets from China. The ring supports the servo. This enables stacking multiple sets into a robot arm or lifting bigger sensors.…

Downloads
239
Likes
25
Rating
5
P
Printablessgmeesix

Xiao Mi 360° Camera Mount

I needed to place my Xiao Mi 360° smart camera high up, but the pan/tilt functions could not cover the whole room. I modelled this simple mount to hold the camera at downward 45° angle.

Downloads
211
Likes
29
Rating
5
P
PrintablesFC2M3D

Cute Cat Holding a Camera Keychain

Easy to make a cute Cat holding a Camera keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
206
Likes
28
Rating
0
P
PrintablesRandyre

C270 Camera Mount Ender 2 Pro and CR6SE

Camera mount on the end of the X-Axis Tension Adjuster. I needed a camera mount for Octoprint for my Ender 2 Pro. All the ones out there interfered with the screen since it was on the left, and couldn't see the nozzle due to the unique…

Downloads
206
Likes
30
Rating
5
P
Printables3DPS

Tri blade boomerang

Just a fun little game that you can print and throw. Hold the leg with the hole in it in your right hand and throw with a flick at around 45 degrees to see if you can get the boomerang to return to you. I find a light weight (0.4 nozzle)…

Downloads
205
Likes
22
Rating
5
P

Raspberry PI AI Camera Case

The full instructions on creating a hidden AI camera with Raspberry Pi: Find 3D-Printed RC cars here.

Downloads
200
Likes
8
Rating
0
P
PrintablesKarim

Ubiquiti Bullet Camera 30 Degree base

Angled base for mounting Ubiquiti Bullet Cameras at 30 degrees. Should work with G3, G4 and G5 Bullet cameras. It allows it to be mounted without kinking the Ethernet cable to get some more angles. Print at higher layer thickness .3 for…

Downloads
200
Likes
26
Rating
0
P
PrintablesNOLBwithaD

AnkerMake M5C camera mount

This is a mounting bracket for attaching a camera to the bed of your AnkerMake M5C/M5. It has a space for the metal bracket for a Wyze Cam V3, but the head can be modified to fit other cameras. I used Tinkercad.com to modify this design,…

Downloads
191
Likes
40
Rating
5
P
Printablesastrophage

XIAO ESP32s3 (Sense) Camera for Prusa XL

————Required Hardware———— Item Cost Seeed Studio XIAO ESP32 S3 Sense ~$24 IKEA Lillhult USB-A to USB-C Cable ~$5 Old Apple (iPhone) 5W USB power adapter ~$0 5 × M3-0.5x8mm Socket Cap Screws ~$4 I pick the Seeed Studio XIAO ESP32 S3 Sense…

Downloads
190
Likes
38
Rating
5
P
PrintablesSushi

Camera Holder of TrueLife NannyCam H32 - faster print

Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…

Downloads
184
Likes
9
Rating
5
P
PrintablesNils Kal

Modular Camera Mount MK3 / MK3s for YI Home and Others

Here is my design of a modular camera mount that snaps onto the aluminium extrusions of the MK3/s frame. The provided mounting plate is suitable for the "YI Home Camera 1080p", however I've provided fusion files so you can design a cutom…

Downloads
180
Likes
38
Rating
4.5
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Downloads
179
Likes
12
Rating
3
P
PrintablesBTR3D

C270 / C310 Camera Mount for Prusa Mini

The model files are not mine. However, I was able to assemble exactly what I wanted by combining files from different projects. For this reason, I wanted to collect and publish it for those who want to make a similar montage. You need: M5…

Downloads
177
Likes
53
Rating
4.5
P
PrintablesAsh

BMCC / BMPC "Keystone" Camera Cage

Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…

Downloads
176
Likes
19
Rating
0
P
PrintablesCorey Ward

Tripod Head VESA Mount for Webcam/Camera

Mounts to an existing monitor VESA mount (100mm hole spacing) using the existing machine screws and holds a tripod head with a standard hex-head 5/8"-16 bolt (not included). Tripod head mount can be up to 55mm in diameter. Center point of…

Downloads
176
Likes
46
Rating
5
P
PrintablesChris Ne

Tripod (telescopic) with Universal Mount (1/4" screw or Gopro-mount) for digital cameras / camcorder / light DSLR

English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…

Downloads
171
Likes
44
Rating
0
P
Printablesshanelord

Logitech Brio Camera spacer for Alienware AW3423DW

This is a quick Tinkercad design to solve the issue of the Logitech Brio 4K Camera mount covering a small amount of the top of the Alienware AW3423DW OLED Gaming Monitor. I used Prusa PETG in Black. Pictures are in draft mode but works…

Downloads
168
Likes
12
Rating
5

Maximera Gridfinity Bins (w/ Fusion file)

These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…

Downloads
166
Likes
23
Rating
5
P
PrintablesPdor_Projects

Raspberry pi HQ camera case - Snap fit

This case doesn't require any additional hardware, it just snaps in place. I suggest printing it with PETG but also PLA should work as well. To make the snap fit work propely be sure that there aren't any debris in the way left after the…

Downloads
164
Likes
17
Rating
5
P
Printablesj.e.hahn

Prusa Mini Camera Mount for Logitech C920

This is a mount based off of the following Thingiverse models: HeyVye's modular mounting system This c920 bracket This 2020/3030 extrusion bracket You will need to disassemble your c920. Perform steps 1-5 of the iFixIt C920 teardown ,…

Downloads
157
Likes
22
Rating
5
P
PrintablesIridium

Kryt kamery - Dome cover for the camera TAPO C210

Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…

Downloads
154
Likes
41
Rating
0
P
PrintablesHD_Creator

Tiny foldable tripod ecosystem for different action cameras

This is a complete ecosystem of parts needed to place a small camera somewhere and fine adjust its orientation around all three degrees of rotational freedom. The problem: Using an action camera to capture our wild and crazy activities…

Downloads
150
Likes
17
Rating
0

Nikon EM Camera Battery Thread Cap Replacement

I made this Battery Thread Cap Replacement after a close friend had a hard time replacing the batteries of her Nikon EM Camera because the piece was stripped . First, I analyzed the design of this cap, especially seen in older cameras,…

Downloads
144
Likes
12
Rating
0
P
PrintablesJPIF

FLASHLIGHT MOUNT FOR REFLEX CAMERA

This mount is available in two versions: Pressure (with three different diameters) and to be able to attach an elastic band. Universal: it consists of one more part that is fastened with two M3 screws. Each part needs a small support…

Downloads
143
Likes
50
Rating
5
P
PrintablesCojoj

Xiaomi Mi Computer Monitor Light Bar camera mount

A genuinely universal mount to the amazing Xiaomi Mi Computer Monitor Light Bar (and probably Yeelight Bar Pro)! With this mod, you can mount almost everything on top of your lamp and keep your monitor aesthetic and clean. For me, it's a…

Downloads
141
Likes
35
Rating
5
P
PrintablesApollo16

Art Deco style housing for Wyze Security Camera

This housing will snap together over a Wyze camera and allow the USB power plug to be connected to the back. The interface features of the base were made larger than shown in the photos to prevent stress in those areas. Print instructions…

Downloads
140
Likes
54
Rating
0
P
Printableslienmeat

AKK A11T 5.8G Micro AIO FPV camera mount

I use this mount on my RC planes that need an extremely light weight fpv solution. I use the AKK A11T FPV camera for this, but attaching them to my planes was always pretty janky before I came up with this mount. I used PETG at 0.10 layer…

Downloads
136
Likes
10
Rating
0
P
PrintablesMartin

iMac 24 2021 Camera Cover LEGO

iMac 24 2021 Camera Cover for LEGO Filament ABS or PLA or PETG

Downloads
136
Likes
21
Rating
5
P
PrintablesVixlier

Brennenstuhl Primera-Line wall mount

Couldn't find any mounting brackets for the Brennenstuhl Primera-Line 10 socket powerstrip so I made a really simple one in fusion. Works better than I expected and holds really well to the underside of my desk.

Downloads
135
Likes
14
Rating
5
P
PrintablesPenguinNinja

Camera cage

I have an unsteady hand when taking video with my camera. I wanted to build a camera cage to decrease the amount of shaking my video would have. While I may not shoot planned movies, I wanted something to make the camera easier for me to…

Downloads
134
Likes
55
Rating
5
P
PrintablesVisualReversal

Ring Stickup Camera Drill Sergeant Hat

First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…

Downloads
132
Likes
23
Rating
0
P
PrintablesMarc

Standard camera mount for Bear frame

This is a mount for a camera using a standard mounting screw (1/4-20) that attaches to the top corner of the front 2040 extrusion of the Bear frame. It's designed to put the camera either on the front-left or front-right corner at a…

Downloads
131
Likes
15
Rating
5
P
PrintablesBartek Kolanko

Samsung S24 Ultra Camera Caps

💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…

Downloads
131
Likes
19
Rating
5
P
PrintablesAudi

Boomerang Holder

A simple holder to display my souvenir boomerang at a slight angle. My boomerang is about 6.2 mm thick and about 330 mm tip-to-tip. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill: 15%…

Downloads
129
Likes
18
Rating
5
P
PrintablesFC2M3D

Universal Camera Mount for Prusa MK3/MK4 (Remix)

You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…

Downloads
128
Likes
16
Rating
0
P
Printablesfivesixzero

Raspberry Pi HQ Camera Case, Hyperpixel Style

Love Adafruit's Raspberry Pi HQ Camera Case ? Love the beautiful Pimoroni Hyperpixel 4.0 display? Now they can play together! This page contains the two models required to make the Hyperpixel 4.0 work with the Adafruit-designed case - a…

Downloads
124
Likes
29
Rating
0
P
PrintablesGeneral Doctor

Insta 360 GO 3S camera & accessory box

A compact box to hold all the components of the basic kit with your insta 360 GO 3S purchase. the lid is loose, but inside a backpack secure enough to protect the contents. Depending on my time or inspiration, I will implement the…

Downloads
121
Likes
11
Rating
5
P
PrintablesPrinterIsComing

Raspberry Pi HQ Camera Logo Case

A simple case for the Raspberry Pi HQ camera. Rear side of case has a raspberry pi logo. I’d suggest printing with a <.15 layer height. It is based on the Pi mechanical drawings and the holes fit M2.5 screws. Make sure the front/back of…

Downloads
121
Likes
11
Rating
5
P
PrintablesGeoff

Kodak Type M Cine Lens Adapter for MFT Cameras

I didn't know of any available adapters for these unusual lenses, so here one is! The smart little Kodak Cine-Ektar 25mm f/1.9 is the only one I have tried, but the coverage on a Four Thirds sensor is pretty good and it is quite usable. I…

Downloads
120
Likes
6
Rating
0