Search results: mk3

Sort order

5,246 models

P
PrintablesPrusa Research

i3 MK3S+ printable parts

All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
125,427
Likes
5,185
Rating
4.95
P
PrintablesKryštof

Temp Tower PLA, PETG, ABS/ASA for Prusa MINI+, MK3S+ and MMU2S

Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…

Print approx. €2.82–€3.44 excl. taxPreliminary estimate for one variant

Downloads
34,739
Likes
2,168
Rating
4.9
P
Printablesschuetzi99

Anti-vibration feet for Prusa MK3/S/S+, MK4 and Prusa Mini/+

My MK3 printer stands on an Ikea Lack table, which is an excellent amplifier for the vibrations of the printer. So I designed these feet, and they do a good job without making the printer too wobbly. A low profile version and a small…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17,858
Likes
3,595
Rating
4.9
P
Printablesteookie

Delta-P fan duct V2-R2 for MK3S(+) extruder

July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…

Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant

Downloads
10,279
Likes
1,934
Rating
4.87
P
PrintablesIn3DSpace

LED Light Bar Prusa i3 MK2/MK3

Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8,694
Likes
2,694
Rating
4.95
P
PrintablesPrusa Research

Spool holder for Original Prusa MK3S+

Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.

Print approx. €5.01–€6.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7,255
Likes
390
Rating
4.91
P
PrintablesIts-my-right

Prusa MK3s+ Fan shroud adapted for Mk3s

Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
6,778
Likes
294
Rating
4.88
P
PrintablesKalleKnall

Prusa MK3 / MK3S / MK3S+ X-Axis Linear Rail Guide Upgrade - updated (Bondtech Extruder) / MK3S+ Tensioner

THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,252
Likes
630
Rating
4.98
P
PrintablesCrafty Sven

Thin Quick Hexagon Desk Tidy (Pencil Holder) MK3S

Quickly designed this fairly quick print desk tidy. It has 2 parameters all around so it prints quite fast for its size (around 9 hrs with the included g-code). This is for MK3 only. As soon as you change the scale, the wall would be too…

Print approx. €8.41–€10.27 excl. taxPreliminary estimate for one variant

Downloads
2,958
Likes
421
Rating
4.81
P
PrintablesFlyingT

Compact PETG Temp Tower for Prusa MK3/S/+

Pre-Sliced the Temp-Tower with the Standard PETG Profile in PrusaSlicer and added the temperature changes accordingly. USE THE .GCODE ONLY IF YOU HAVE AN PRUSA MK3, MK3S or MK3S+ IIT HEATS UP TO 160° FOR BED LEVELING, FINAL TEMPERATURE…

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,914
Likes
75
Rating
4.6
P
PrintablesPrusa Research

Original Prusa i3 MK3S+ Gift card

Do not cut through all. Best results found to be using a default settings: Layer height - 0,15 quality 0,4mm nozzle Prusament PLA or PETG

Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant

Downloads
2,877
Likes
837
Rating
4.88
P
PrintablesIn3DSpace

Single LED Light Bar Prusa i3 MK2/MK3

Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…

Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant

Downloads
2,674
Likes
531
Rating
4.95
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,669
Likes
521
Rating
4.82
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5/S, MK3.9/S & MK4/S - MMU Not Required)

Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…

Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,941
Likes
781
Rating
4.97

5 x 5 Grid Bed Level Test - Fits Prusa MK3

Simple bed level test - 5 x 5 grid of 25x25mm squares layed out in the shape of the Prusa MK3 Printbed.

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
1,782
Likes
48
Rating
4.93
P
PrintablesIn3DSpace

MMU2 LED Light Bar Prusa i3 MK2/MK3

Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…

Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant

Downloads
1,734
Likes
351
Rating
4.92
P
PrintablesArtyL

Prusa MK3 RHD Fan Shroud Duct revC

This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant

Downloads
1,217
Likes
94
Rating
5
P
PrintablesWilfred

MK3 X-axis cable protection and strain relief

If the X-axis cable should break it will do so in a place where you can't solder a new wire to the broken one. It will be almost inside the stepper. With this very simple solution, the cable (if it should break) will do so outside of the…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,004
Likes
85
Rating
5
P
PrintablesMegardStudio

Original Prusa i3 MK3 3030 T-Slot Extrusion Channel Cover Set

T-slot covers provide protection from debris buildup and can also be used to manage wires and cables recessed within the T-slot. They can also add a finishing look to your project. So... Since I couldn't really find what I wanted I made…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
988
Likes
99
Rating
4.58
P
PrintablesIn3DSpace

Bear Upgrade LED Light Bar Prusa i3 MK2/MK3

NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…

Print approx. €7.55–€9.23 excl. taxPreliminary estimate for one variant

Downloads
986
Likes
197
Rating
4.85
P
PrintablesVictor

Prusa MK3s+ and MMU3 - Orca Slicer profile

Working profile in Orca Slicer for a Prusa MK3s+ and MMU3. Tested with 1000+ tool changes with no cloggs and only one user error :D This is no longer getting updated since I sold my MMU3. Video guide Step-by-Step video guide Instructions…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
980
Likes
67
Rating
5
P
Printablesxander1

Prusa i3 MK3S Y axis motor mount (off the frame)

This is a beefed up Y-axis motor mount for the i3 MK3S with built-in end stop. The advantage of this design is that the linear bearings won't hit the backplate of the frame anymore to mark the back end of the Y axis. Instead, the belt…

Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
974
Likes
156
Rating
4.92
P
PrintablesNils Kal

Prusa i3 LED Lightbar with Filament Guide MK2 / MK3 / MK3S - Single Piece

Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…

Print approx. €5.31–€6.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
943
Likes
226
Rating
4.75
P
PrintablesTB

Prusa MK3s y-axis belt holder - GT2

I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt. The only weak point now is the stock belt holder on y carriage. To have a…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
894
Likes
135
Rating
4.76
P
PrintablesNils Kal

MK3 (s+) Stealthburner V0.5 - compatible with MK3s+ Extruder

MK3 Stealthburner V0.5 This is my Stealthburner case mod for the original mk3s+ extruder. Note that this is only a design upgrade and the upper ‘fan’ is actually a extruder visualizer (I may also do a version with an active fan in the…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
831
Likes
389
Rating
4.85
P
PrintablesLV3D

MK3 / MK3S / MK3S+ X idler with tensioner

Do you like stock design and don't like stock tensioner? Here is solution. Parts: -Stock idler sourced from Prusa Research -Compatible shaft is Ø2.9-2.99mm, 15-16mm in length. -2x M3 nylon hex nut -2x M3x18 Socket head screew Print…

Print approx. €2.86–€3.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
769
Likes
102
Rating
4.91
P
PrintablesTiffi226

Prusa MK3/MK4 build plate holder - steel plate holder // 3 slots

Remix of the model from grooveup - I just needed 3 slots to hold my build plates.

Print approx. €2.68–€3.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
674
Likes
51
Rating
4.93
P
PrintablesNils Kal

MK3 / MK2 / MK3S First Layer Calibration Test Surface whole bed 250x210

First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant

Downloads
672
Likes
31
Rating
4
P
PrintablesCarter

fan duct for Prusa I3mk3 B7

The original broke near the screw so I beefed it up... 2 versions... Original air flow with slightly thicker walls... Second version has vents crossing the current from the direct openings from the fan. No part fan air directly going…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant

Downloads
604
Likes
26
Rating
4.86
P
PrintablesJeepingJohnny

i3 MK3S Z-Axis Dust Covers V2.0 ~ Snapable!

Description Dont leave your Z Axis Naked! Now they fit much better and do not move around! I tightened up the print. Printed from the top. This adds the bed texture to the top and prints at higher quality without any bridging. Print…

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant

Downloads
603
Likes
126
Rating
5
P
PrintablesJuraS

Spool Holder adjustable with bearings for Prusa i3 MK3S

Spool Holder adjustable with bearings for Prusa i3 MK3S Original spool holder (no printed double holder) delivered with original Prusa MK3S is not good for smooth unwinding filament. So I designed and created my own. adjustable for…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
569
Likes
45
Rating
5
P
Printablesfoorschtbar

Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…

Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant

Downloads
559
Likes
111
Rating
4.89
P
Printablestoomuchtuna

Prusa i3 MK2/MK3 Spool Holder - 100% Printed with Herringbone Planetary Gear Bearings

This model is a combination of two fantastic 3D models: Emmet's Herringbone Planetary Gear bearings and Martin Majewski's Spool Holder . The motivation behind this project was simply to remove the need for store bought 608 bearings. These…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
540
Likes
102
Rating
4.9
P
PrintablesTobashadow

Prusa MK3S MK3S+ Speed profile + Best Supports settings Combo

Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
445
Likes
27
Rating
4.5
P
Printablesnilok

Prusa MK3 LCD Knob - Multi Spoke Models

This was created from the original Prusa file. Image 1: Carmine Red on Galaxy Black Image 2: Galaxy Black on Prusa Orange Image 3: Ultramarine Blue on Prusa Orange Image 4: Prusa Orange on Jet Black EDIT: I added 2 additional models plus…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
438
Likes
26
Rating
5
P
PrintablesVisualReversal

MK3 Original Prusa Enclosure (OPE) Mesh Side Boxes (No MMU Needed) - Deprecated

UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…

Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
418
Likes
102
Rating
5
P
PrintablesSvanGool

OctoPrint/OctoPi Camera configuration for Prusa 3D printer MK3S(+)

OctoPrint/OctoPi Camera configuration for Prusa 3D printer MK3S(+) This configuration is used for monitoring and controlling a Prusa MK3S(+) remotely using the OctoPrint software suite ( https://octoprint.org/ ) an RPI4B (…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
349
Likes
86
Rating
4.67
P
PrintablesJeepingJohnny

Prusa MK3/S ToolBox Orgonizer

Check out the upgraded version its Bigger and Better! https://www.prusaprinters.org/prints/134557-prusa-mk3s-tool-box-orgonizer-v20 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I changed the clip design to ensure…

Print approx. €7.42–€9.07 excl. taxPreliminary estimate for one variant

Downloads
346
Likes
37
Rating
4
P
PrintablesBaGooN

PSU Brace for Prusa MK3

This brace is used instead to maintain frame rigidity after the PSU is removed. Select a model data according to the position of the slide-nut. Don't bother removing the slide-nut from the frame. Print settings: Filament: PLA Layer…

Print approx. €5.05–€6.17 excl. taxPreliminary estimate for one variant

Downloads
311
Likes
68
Rating
5
P
PrintablesLionel_Dagon

Bowden tube clip for Prusa i3 MK3S

I made this clip for my Prusa enclosure project. I need something to maintain PTFE tube on top of the printer. Compatible PTFE tube: 4mm diameter Assembly instructions: Clip the part on your Prusa Insert PTFE tube you're done! Print…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
310
Likes
45
Rating
4.83
P
PrintablesTronnic

Passive Extruder Stepper Motor Cooling Cover - MK3/S NEMA17

A simple but effective way to cool your extruder motor. Mine peaked at 85°C and I was looking for a way to cool it. I didn't have problems but read around the internet that this can cause jamming since the gears can get hot causing PLA to…

Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
301
Likes
50
Rating
5
P
PrintablesTimothy_Ecc

Valve Steam Deck official stl oriented to print on mk3

I was able to print the Steam Deck in a single piece on my MK3S using the gcode I have uploaded. The 3mf file should work if you want to change details, but I have not printed using it. Recommended settings: Supports: I would recommend…

Print approx. €20.53–€25.09 excl. taxPreliminary estimate for one variant

Downloads
288
Likes
34
Rating
4.75
P
PrintablesFlat Badger

Freenove ESP32-Wrover CAM Mount - Prusa MK3 & MK4

A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…

Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
273
Likes
32
Rating
5
P
PrintablesJulianKoe

Print approx. €8.45–€10.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
259
Likes
10
Rating
5
P
PrintablesMarko3D.cz

2,5kg Spool Holder for Original Prusa MK4 & MK3S+

Stáhněte si můj model držáku cívek pro 3D tiskárny Original Prusa MK4 a MK3S+ zdarma. Bez problémů se na něj vejdou cívky s filamentem o průměru až 30 cm a hmotností až 2,5 kg.

Print approx. €3.11–€3.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
250
Likes
22
Rating
4.5
P
PrintablesNils Kal

Delta P fan duct for 5020 blower - MK3s+

Delta-P fan duct remix for a 5020 blower, compatible with the mk3s(+) You might need 2 longer m3 screws to hold the fan. Use .3mf for preconfigured settings

Print approx. €1.45–€1.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
240
Likes
46
Rating
5
P
Printablesreadysetawesome

Remixed "Delta-P fan duct for MK3S extruder" w/clearance for MK3S parts

I printed this in ASA at 100.5% scaling to allow for some shrinkage. using variable layer height I made changes to fix the misalignment of the part cooling fan and the duct/bracket that wraps around the heartbreak, above the hotend. In…

Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant

Downloads
237
Likes
32
Rating
1
P
Printablesaha2988

MK3S+ PC4-M10 Thread Reverse Bowden Cover

didnt like the current offerings here so modeled up this version based on the factory Extruder Cover. This adapts a PC4-M10 thread push connect 4mm fitting to the infeed of the MK3S+ extruder for reverse bowden setups. Pair it with any of…

Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
235
Likes
31
Rating
4.88
P
PrintablesRed Hat Jef

MK3 + Delta PSU Support Bracket

Support bracket for the MK3 with the new Delta PSU. This is used when removing the PSU to make an enclosure for printing things like ABS. (Power supplies don't appreciate the heat like ABS filament does!) Print instructions Suggested…

Print approx. €7.64–€9.34 excl. taxPreliminary estimate for one variant

Downloads
235
Likes
11
Rating
4.67
P
PrintablesJeepingJohnny

Prusa MK3S Ultimate ToolBox V3! Bigger and Better!

Bigger and Better. There is room for even more tools now! It can handle anything you can toss into it! Lots of improvements on the model. ENJOY! The back dump basket is bigger, improved clip for the frame (doesn't sag), with and without…

Print approx. €15.35–€18.76 excl. taxPreliminary estimate for one variant

Downloads
228
Likes
47
Rating
4.4
P
Printablessourekv

Original Prusa i3 MK3 X-axis motor cable strain relief - flange

Original Prusa i3 MK3 X-axis motor cable strain relief with added catch on motor flange. !Not compatible with Bear Upgrade! originally: https://www.thingiverse.com/thing:3433554 remixed from: https://www.thingiverse.com/thing:3216603…

Print approx. €0.60–€0.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
216
Likes
25
Rating
4.92
P
PrintablesHiro

Chiikawa Mini Figure Stand for Prusa i3 MK3S+

Features This is a stand for mini figures of Chiikawa series. It attaches to the Z-axis-top part of the Prusa i3 MK3S+, and the figure is attached to it with double-sided tape. What is "Chiikawa" ? → Please watch the video in YouTube .…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
209
Likes
26
Rating
0
P
Printablesmcbeenb

Prusa MK3S+ Filament Feed Tube Mounts

Updated 2025-04-08 Added an ECAS option for the z-axis feed tube holder Added an STL with looser tolerances I didn't author the original fs_cover, so I don't have a quick way to update it this second. I'll go ahead and remix up a looser…

Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant

Downloads
199
Likes
23
Rating
4.33
P
PrintablesLouisVarley

Prusa I3 MK3s+ Tool Caddy Holder (Including Calipers)

This is bits from quite a few tool caddys i've used over the years merged into one suitable for the Prusa I3 MK3S + This can hold 4 x Allen Keys (one size larger than comes with prusa as i use it for my table) 1x Tweezers 1x Philips Screw…

Print approx. €2.95–€3.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
195
Likes
35
Rating
4.14
P
PrintablesJeepingJohnny

Universal Web Cam Mount Prusa i3 MK3S

I remixed this for my setup. Changed the shape for my gyroscope and added some Zip Tie mounting spots. Should be able to zip tie most web cams and cables to this mount. Added a higher angle mount also. The lower angle is good for across…

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant

Downloads
190
Likes
10
Rating
5
P
PrintablesNat

MK3/MK3S Side Filament Guide

For those who have their spool to the side of their printer, this is a simple and elegant solution to your guide's needs. I liked the original, but I kept forgetting to thread the filament through before loading. I remodeled it to fit a…

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
31
Rating
5
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
179
Likes
12
Rating
3
P
PrintablesDatafreak

Prusa i3 MK3S+ - Anti Vibration Feet

This is a Remix of the Anti Vibration Feet from wolwin_de & SmashD to fit on my Prusa i3 MK3S+. - https://www.thingiverse.com/thing:3440488 - https://www.thingiverse.com/thing:3666605 You need: 4x of every part 4x OEHLBACH Shock Absorber,…

Print approx. €5.94–€7.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
175
Likes
39
Rating
4.67
P
PrintablesMike Ant

Prusa MK3/MK4 Bin/Toolbox with lid and dividers - both sides

Since there is never enough space for various small things and tools for the printer, I decided to modify the already remixed Prusa MK4 Toolbox model from author S3BR4 , which I liked the most, to be used on the left side. While I was in…

Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant

Downloads
172
Likes
27
Rating
4.64
P
PrintablesZwoop

Spool holder for centered alignment, MK3 and MK4

This print was inspired by a few similar models, but none of the ones I tried worked all that well. In particular, they all had one or several of these problems: Correct threads alignments. This knob screws on and off with ease, whereas…

Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
163
Likes
33
Rating
4.75
P
PrintablesFrankTheTank908

Hatchbox ABS Temp Tower MK3/s Gcode

Original didn't provide Gcode. This is for people that just want to download and print without knowing how to change Temps. This is the right thing for you. I did not create this model, I changed all the temps to be ready to print. Enjoy

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
3
Rating
0
P
PrintablesSimonp

Pressure Advance Linien 0.6 Nozzel MK3.5 und Input Shaper Test

Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
14
Rating
0
P
Printables@QuinoStream

MK3s Reverse Bowden TOP - Large (8,5 cm) &Short (7cm) PLATSA

Modelo más corto y con corte, para evitar choques con el extrusor a partir de Z 180. Altura 8,5 y 7 cms – Reverse Bowden Short Connector, for Prusa MK3s frame`s and Ikea Platsa furniture. Large and short versión

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
149
Likes
32
Rating
5
P
PrintablesMoNkEy

MK4 Y-Axis belt tensioner MK3/S/S+

Perfectly working on Prusa MK4 I recommend printing with 30% infill No supports Layer height 0.2 Pay attention to the nut component, I left a layer indicating the correct screwing position, see photo. Not tested on Prusa MK3/S/S+ I hope…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
146
Likes
35
Rating
4.8
P
PrintablesFC2M3D

Universal Camera Mount for Prusa MK3/MK4 (Remix)

You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
128
Likes
16
Rating
0
P
PrintablesForker45

MK3S+ Vibration Isolation Feet

Update: included TPU feet from Elan As part of my Lack Enclosure Build for my new MK3S+, I wanted to isolate printer vibration from the table top and reduce noise. I designed my own feet which included outboard supports on the front of…

Print approx. €3.73–€4.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
125
Likes
53
Rating
5
P
PrintablesJeepingJohnny

Lettering inserts for your Prusa i3 MK3S LCD Cover.

Lettering inserts for your LCD cover. Print instructions Printed in PLA with dual colors. I printed each letter individually then used a tooth pick and Gorilla Gel superglue to line the cavities then carefully insert the letter and fix…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
21
Rating
5
P
PrintablesJeepingJohnny

Prusa MK3/S Tool Box Orgonizer V2.0!

I have upgraded my design. Its Bigger and Better! Larger size, Bigger dump basket, More dump slots, Better designed Allen key wrench holder, Better frame clip. Some overall improvements to the model. GCode, 3mf, STL, and Blender file's…

Print approx. €8.65–€10.57 excl. taxPreliminary estimate for one variant

Downloads
109
Likes
15
Rating
5
P
PrintablesLucky

Anti Vibration Squash Ball MK3s/MK3s+

Malgré une surélévation de l'imprimante qui ne gène en rien, il se fixe a la place des supports d'origine. J'ai utilisé du TPU pour la partie haute avec un remplissage a 30% et PLA 50% pour l'autre partie. Vous pouvez remplacer le PLA par…

Print approx. €4.67–€5.71 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
18
Rating
5
P
PrintablesBlinkSTOP

LCD to frame gap filler for MK3.5, MK3.9, MK4 & MK4S* (4 separate models, *see note below)

If slicing yourself, orient with the text face on the bottom Prints without supports Print in PETG Sliced at 0.15mm layer height using Prusa 0.15mm structural default settings for PETG at 245°C. Gcode provided is for MK3.5 * warning - one…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
104
Likes
17
Rating
4.67
P
Printablesc22dragoon

Raspberry Pi Camera Mount for Mk3S+ Remix

Remix of the awesome Raspberry Cam v2 mount for MK3S(+). When printed for the MKS3+ the camera position was a too low. Thanks to @fuchsr for providing the step file, I was able to modify the mount a little to adjust the camera arm angle…

Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
13
Rating
5
P
PrintablesBM

Integrated Enclosure i3 MK3S (heat chamber)

Without any modification on the stock machine (neither mecanical nor firmware), this integrated enclosure kan provide a chamber temperature up to 45°C to limit warping and enhance layer adhesion while printing more technical materials as…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
94
Likes
34
Rating
0

Vertical lights for MK4/MK3

I make lights for my MK4, because I cant find some lights with switch for on/off. I use 24V LED lights and connect them tu the power supply of printer. For the connect lights to the printer I use this nut and screw M3x12…

Print approx. €5.88–€7.18 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
37
Rating
0
P
PrintablesPFITS

Drybox for 2kg filament and Prusa MK3S+ Topmount

The Drybox is a remix and recreation of above models. It is build to fit directly on top of the Prusa MK3S+ Printer and has a shaft to hold the spool, so no need for any bearings and other tubes. To attach everything you will need this:…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
91
Likes
15
Rating
0
P
PrintablesMoNkEy

MK4 MK3/S/S+ Suspended Storage Box

If necessary, adjust the supports to allow them to fit together Distance from first support to engine approximately 12mm Distance of second support from first approximately 91mm Used printing profile 0.20mm STRUCTURAL (Input Shaper) I…

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
13
Rating
5
P
Printablesschuetzi99

Minimalist Nozzle Holder for E3D V6 (Mini, Mk3S, ...)

This is a minimalist nozzle stand. It prints in spiral vase mode, and therefore requires little filament and print time. It is for E3D V6 nozzles, which are used by Mini and MK3. On the left side are labeled the sizes that are sold by…

Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
84
Likes
28
Rating
5
P
PrintablesOčko

Prusa MK4/MK3.9/MK3.5 LCD display cover_remix_@Dzino

Print MK3,5 0.2mm Structural Prusament Petg infill_25% perimetr_3 first layer_240°C/85°C other layers_245°C/90°C

Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
83
Likes
16
Rating
5
P
Printablescamdotcam

LightBar Prusa MK3S Z Axis Dual Mount 7*16 extrusion slot

This is a modification I made to the excellent light bar design by SethBon to suit some aluminium extrusion I have, with external dimensions 7*16.…

Print approx. €8.06–€9.85 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
14
Rating
5
P
PrintablesKai

Prusa MK3 / MK4 Display Halter --- Prusa MK3 /MK4 Display Holder

Stand alone Halter für das Display des MK3 und MK4. Damit kann das Display verwendet werden ohne am Drucker befestigt zu sein. Das ist besonders dann hilfreich wenn der Drucker, wie bei mir, quer in einem Schrank verwendet wird. Die zwei…

Print approx. €1.72–€2.11 excl. taxPreliminary estimate for one variant

Downloads
76
Likes
14
Rating
5
P
PrintablesMartin

Temperature & Humidity Meter Stand or holder for Prusa i3 MK3 360 degrees

Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…

Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
12
Rating
5
P
PrintablesPointNemo

Skadis MK3S Steel Sheet Holder (Horizontal Version)

This is a horizontal version of Haymount's vertical holder.

Print approx. €3.78–€4.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
68
Likes
13
Rating
0
P
PrintablesTiskoviny.EU

LED Lightbar for Prusa i3 MK2, MK25, MK3

EN: LED Lightbar for Prusa i3 MK2, MK25, MK3 This is an easy-to-snap light model for the printer frame. Note that there are differences in frame width of 5 mm on each side between the MK2 and MK3. For this reason, two sets of models are…

Print approx. €7.45–€9.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
17
Rating
0
P
Printablesmscalora

Quick Disconnect Blink Mini Camera Mount for Prusa MK3 & MK4

Mount a blink mini camera to the front of your Prusa MK3S+ and MK4 with removable section using dovetail. If the Dovetail is too tight, use a bit of sandpaper and it will free up nicely. I used PLA, any rigid material should do. I hang my…

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
9
Rating
4
P
PrintablesMykal451

MK3S+ Einsy Case w/OEM Look and Feel Expanded & Reversed

My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
15
Rating
4
P
PrintablesGeert Bevin

Prusa Protective Face Shield - RC1 4x on Prusa I3 MK3S

This allows 4 RC1 shields to be printed at once, but without the bottom reinforcement. This also includes a 0.6mm nozzle gcode file that has been highly optimized for the Prusa i3 MK3S and prints these four shields in 3h18m Print…

Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
57
Likes
0
Rating
0
P
Printablesmagarbl4

Prusa MK3* MK4* PEI Sheet Holder

Die Prusa MK3* MK4* PIE-Halterung ermöglicht die platzsparende Aufbewahrung der Platten unter einem Regal.

Print approx. €21.86–€26.71 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
7
Rating
5
P
PrintablesSYNCPRINTING

Clamp on, Filament Guide with 12mm PTFE for Prusa mk3

Hello!! Here I have made a filament guide to stop filament coming off the spool mid print, I was having problems printing the base to my PS5 charging tower due to it being massive and taking 2 rolls of filament to print, when I would…

Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
26
Rating
0
P
PrintablesAG3D_STUDIO

10mm rod Z axis - 325mm for Bear Prusa MK3 / MK3s / MK3s+ / MK3.5

I modified the upper mounts for 325mm long shafts from Prusa MK4.

Print approx. €2.55–€3.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
15
Rating
0
P
PrintablesRamingoDesign

Temp Tower MK3S+ MMU3 Nozzle 0.6

preset GCODE for 0.6 mmu3 on prusa i3mk3s+ PETG Prusament

Print approx. €1.97–€2.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
2
Rating
0
P
PrintablesStevenTh

Mk3 style heatbed cover for Prusa Mini with cable relief and thermistor quick-connect support.

This is an improved (out of necessity) version of my own MK3 style heatbed cover for the Prusa Mini. It still features: MK3 style; Allows for heatbed connectors on top for optimal current flow; Reliefs the cable and helps prevents…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
17
Rating
5
P
PrintablesPat_S

Raspberry Pi 3B+ case for the Prusa MK3S (Remix) / Raspberry Pi 3B+ Gehäuse für den Prusa MK3S (Remix)

Remix of the case by dktosoch. https://www.thingiverse.com/thing:2844013 The housing now fits on top of the Prusa MK3S and can be fixed with two M3x10 screws. Happy printing! If you like this thing leave a like or post a make. I'm always…

Print approx. €4.55–€5.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
2
Rating
0
P
PrintablesŠimon

Esthetic upgrade for Prusa MK3S (3DBenchy holder)

It is a nice upgrade. I recommend printing it in this filament https://shop.prusa3d.com/en/prusament/711-prusament-pla-prusa-galaxy-black-1kg.html and the 3DBenchy in orange. It will match the colors of printer. In order to make 3DBenchy…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
17
Rating
0
P
PrintablesSkeletalPrints

Prusa i3 MK3 / MK3S Camera Mount Extended + Allen Key Holder

Link to CAD: https://cad.onshape.com/documents/e6e09e9e0e007a10af293064/w/ebebf269118f97728c774686/e/3e5ef0c7e7cf5655f47403fc?renderMode=0&uiState=63e95f946c42ea2abe0b7efe

Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
7
Rating
5
P
PrintablesFlorian Huber

Logitech C270/Brio100 Mount - Prusa MK3/S/S+

Mount for a Logitech C270 and Brio100 webcam for Original Prusa MK3/S/S+. Great for monitoring prints in Topview.

Print approx. €3.85–€4.71 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
6
Rating
0
P
PrintablesOčko

MK3.5/MK3.9/MK4/_el-box-cover-R2_remix

Original setting PrusaSlicer 0.2mm Speed, Prusament Petg.

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
31
Likes
4
Rating
0

Partcolingfan duct for Prusa MK3s with stabilizer

Partcolingfan duct for my Prusa MK3s with stabilizer on the fanmounting-screw --- Teilekühler-Düse für meinen Prusa MK3s mit Stabilisierung an der Kühlermontageschraube

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
2
Rating
0
P
PrintablesJagesh

Raspberry Pi 4/4B Mount for GeeekPi Case on MK3/MK3S/MK3S+

Uses 2 M3x8mm screws to mount to the frame. Print instructions: -Brim recommended -No supports -0.2mm layer height You can buy the case here: Case + Power supply: https://amzn.to/4f2fVIn Case only: https://amzn.to/40lDUOb Have included a…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
5
Rating
0
P
PrintablesWerner

Resonance Damper MK3S/ Anti Vibration Feet

My printer is on an old, wobbly table. The vibrations of the stepper motors were transmitted throughout the house before my small absorbers were placed underneath. These dampers redirect all vibrations into the upper wall of the…

Print approx. €3.72–€4.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
5
Rating
0
P
PrintablesBryon Brill

Logitech MK350 Keyboard Leg

First published ad-hoc model. I recently had a co-worker break his MK350 Keyboard legs, so I threw this together quickly with a caliper right quick on the spot. It closes, but not flat like the originals. This is version 1. If anyone…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
2
Rating
0
P
PrintablesScott Gibb

Prusa I3Mk3s+ Raspberry Pi 4 Case

Summary I found that my Raspberry Pi 4 was overheating when running Octoprint, so I decided to buy a heatsink to solve the problem. The one I bought is really good due to its massive case. However none of the existing cases for the Prusa…

Print approx. €5.11–€6.25 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
2
Rating
0