1,801 models
I recommend printing the Solder Scroll tool and the modified spool from PETG. Press the larger area onto the backing, then snap the two parts together. After winding the soldering wire, clip it with the wire cutters flush with the coil.…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
These are a portion of the files from https://blog.prusaprinters.org/mmu2s-printer-enclosure/ that have re-arranged/modified for printing on a Prusa Mini It doesn't include these parts because I assume you are enclosing a mini and don't…
Print approx. €2.07–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of this bag clip: https://www.thingiverse.com/thing:4027950 which goes back to https://www.thingiverse.com/thing:3238736 . Modifications are: 1) The insert has two stops. One prevents it from falling into the bag and the…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
This is a remix of Agustin Flowalistik's Chainmail: https://www.prusaprinters.org/prints/286-chainmail-3d-printable-fabric It uses 9 of his sample sized models in order to fill the bed of the Prusa Mini. Print instructions This print came…
Print approx. €6.04–€7.38 excl. taxPreliminary estimate for one variant
This is a slightly modified version of the MK3s heatbed bottom cover. I added a rear support for the cables with a channel for a zip-tie. This does add an additional 9mm to the length of the part, so tight enclosure/wall spaces should be…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Since I needed a liftarm with holes instead of crosses and in regular as well as half thickness, I constructed a 3x5 and 3x5x0.5 liftarm similar to the Lego - parts 99773, 65193, 2905. Print the liftarms in STL orientation with support on…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
For fuselage 2,3,4, and cover 2, you will need to lower it into the bed to get rid of the connector. As seen in the photo: You will also need to make sure supports are on, and remember that fuselage is 0% infill, flaps are 5%. Set the…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Modified jaws for gripping at an angle. I use them for soldering components to PCBs.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
This is a modified version of Lndnny's Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style . A fantastic case for the hexagon handle. This lower insert is modified to accommodate the Round Aluminum Knurled handle version. I haven't…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
Upload of my project from thingiverse since thingiverse has become trash! Want to try non-planar printing but don't want to remove the fans from your printer or bother setting up Slic3r Non-Planar. Try this! Using 60c bed temp and 200c…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
I found IsaacW's "Sterilite Desiccant Box." It was perfect for what I was looking for. 👍 When I printed it, though, there was a lot of flexing the in the vertical fence once it got higher than ~17mm. I decided that all it needed was a…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for PETGSource material: PET
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
Print approx. €17.71–€21.65 excl. taxPreliminary estimate for PETGSource material: PET
I modified on (MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks) to make the arm sensor longer, and it worked fine when I test it. Give it try !
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
This modified adapter-printer part changes the position of the steel ball in the filament sensor of the MK3S+ to fix detection problems. Background I was having failed detections with TPU filament because it was slightly compressed by the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Modified eye piece for ByteSlinger's Portal Turret Pumpkin.
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for PETGSource material: PET
Modified DaveyPrints85's fridge magnet to suit the magnets I had on hand. This model fits 2 12mm x 2mm magnets that can be superglued in place.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
These clips are used to seal your open potato chip bag. Three sizes are available. Because there is a large printing overhang for the tabs, I included tree supports which removed easily.
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
Update 24/08/2023 : Add of an easiest way to plug a fan to your Mox with a unique part to print. The Turris Mox is an modular, open source and secure router. Even though this is a great router, it tends to get hot and reboot. To fix it, I…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Das originale Honigwaben-Design fand ich sehr schön und luftdurchlässig, so das ich es für einen 60mm Lüfter aus einer alten Grafikkarte modifiziert habe. Diese Abdeckung der Elektronikbox ( xBuddy Cover ) ist sehr passgenau. Dank an…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Background: I have a CurrentRanger from lowpowerlab , which came with a case. Unfortunately I both lost the screws that hold the lid to the case, and the screws screw into somewhat flimsy looking plastic holes directly, which I was not a…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
DE: Dankeschön an Luca, diese Idee macht mir meinen Batterieorganizer noch wertvoller! AA und AAA Batterien haben oft im Bereiche des Plus-Poles eine ringförmige Kerbe. Damit der Hebel bei Vorhandensein besser daran angreifen kann habe…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Modified the Holder to fit my wireless charging puck from a Anker
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
I increased the clip dimensions to allow for the thicker edge that I wanted it to slide onto in my Mustang Mach e. I also designed a slide on cover for aesthetic reasons. I printed the bin with a .6 nozzle to shorten time to print, but…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET
If you use the Coral Accelerator with the LimeLite and you use this (or the original) bracket, see the back-mount Coral bracket here https://www.printables.com/model/908221-coral-accellerator-bracket-for-limelight-bracket
Print approx. €5.15–€6.30 excl. taxPreliminary estimate for one variant
DUMMY 13 resized to 200% with a few alterations. 200% feels like how this model was meant to be. This model does rely on strong materials, I’ve had good results with high quality PLA. I've added a couple of test STLs so you can test your…
This is a modified chest for the Dummy 13 posable figure by @soozafone for large, scaled up prints for easier assembly. The ball joint of the Dummy 13 figure uses a slightly undersized socket to provide the necessary friction. When…
I had to slightly modify the filets on CSD_Salzburg's excellent SKADIS Universal Hook system, as on my particular Skadis they were a tad loose. Included are STEP files for a hook with my modified filets, a hook without filets so you you…
MagicShrimp made covers that can be installed on the Elegoo Centauri Carbon to stop debris from getting under the bed.In the second batch of printers the bed mount was changed, so I modified MagicShrimp's design to suit batch 2. You'll…
For more detailed info, watch the YouTube video: The modified nut may not be needed. The modified lever is a drop-in replacement that shouldn't cause any issues but may resolve issues with poor grip on the filament.
remixed by: White JackaL Made the stand more stable. Print on its side so you dont have to use suports. Printer: Ender-3 Filament: PLA Hotend: 205c Hotbed: 50c Resolution: 0.2mm Infill: 15% cubic Subdivision Speed: 30-60 mms Print…
Try one corner clip if it works for you.
This gcode is based upon the great work of Thrutheframe, though I ended up removing or changing a lot of his alterations due to them already being folded into the current P1S stock gcode. So these files don't change motor voltages (Bambu…
I like the original katana for lucky but the guard felt lacking to me so I model up a quick guard and edited the origin i printed this with the normal printing settings as lucky 13 (super glue required when putting the guard on)
Latest Update All other previous updates will be posted at the bottom. Update (4/18/2023) *Updated file - Light_Bar_Design_Final_4A to 5A and Light_Bar_Endcap_2B to 3B Based on the feedback received from @suit , I added detents that will…
The foot part is longer, chest a bit bigger and head slightly rounder and narower. Plus I've added helmet and katana which was edited from the staff.
Printed in PLA with 15% infill with supports. PETG would have been a better choice but did not have it. PLA have been coated with epoxy and spray painted in black. Can't find the original files on this website anymore, still had the files…
This medieval castle print was modeled from two European castles that are both majestic and have very interesting construction and incredible views. Schloss Lichtenstein and Neuschwanstein Castle, both located in Germany. I modified the…
Fits into the newer ashtray railsystem (after 96, i think.) modified some parts for better printing in PETg on Prusa MK3S: cupstand arms were strengthened because they broke easily on low res prints the front panel was split into 2 pieces…
Please use the updated version: https://www.printables.com/model/359020-bambu-lab-p1p-modified-led-mount-20 Updated version of this model with better cable management and a redesign of how the LED board is fitted in place. Description…
This slightly modified main plate for the Nextruder was motivated by a few filament jams, where flexible filament (Shore 90A) got stuck between the extruder main gear and the stepper motor. This path is now blocked, which should hopefully…
This is a modified steering bar which better fits the dimension of a standard DS3218 servo. Print with supports.
This is a set of tilting stands for the Surefeed Pet Feeder, model MPF001. It's a modification of Wolf_Jameson's Surefeed Pet Feeder Adjustable Stand , specifically his model 2 version. He used screws to install pins to hold the stands in…
The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)
Original model for the Heltec V3 by Muziworks: https://www.printables.com/model/741974-h1-case-for-heltec-v3-running-meshtastic This is a modified version of the original H1 case by Muziworks. I wanted to play around with a Heltec V4…
Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…
Hinges for a Flashforge Adventure5M. These have had the hole placement moved for better door swing. Door will not hit the frame now.
Improved taller enclosure for the FlashForge AD5X. These alternate parts and additional parts increase the overall height by 64mm, this gives proper room and clearance for the PTFE feed tubes, There is also a cowl that installs over the…
During assembling my MK4 I realized that I was not able to perfectly align the y belt and after closer inspection, I saw that the motor is slightly canted when tightening down the screws, since the thermal pad is slightly thicker and not…
Thank you Enigma for the very nice design. It printed well and snapped together with ease. I did find that using the original lower lip dispenser design, if you pull a soda can too quick other cans wanted to follow. So I designed a quick…
Printed using Anycubic red PLA, 15% adaptive cubic infill and 2 parameters.
Update (2023/7/13): Added the “WithRegister” variations for the TopBody and BottomBody The RegisterCube can be used to align the top and bottom body when gluing the two parts The RegisterCube is 0.2mm smaller than the register holes,…
This is a remix of Wire Splice Mold by t2pain2 on Thingiverse https://www.thingiverse.com/thing:6316585 Changes from the original: - Split into two models for easier slicer arrangement. - Re-scaled to properly fit 14AWG wire without…
so yah, as title says, this is basically a remix I designed. I took the light bar dimensions and whatnot and then made this model based on my likings. The one that BL suggests printing points the LED's at a strait across angle. basically…
Same enclosure, I just removed the personal logo inlay from the pieces.
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
I've solved some errors in the lower part and modified the top part to have space to use the GPIO pins from outside and have the pin to fit a 30x30 mm fan without screws. The fan is oriented to blow air inside. I've removed the holder,…
This is a remix of the Mechanical Tally Counter 5.0 by FredrikHamrebjorkDesigns. I modified the Left and Right buttons, and the Back Cover. All other parts can be printed downloaded from the original model maker's page: Mechanical Tally…
Updated Version of the great mounting blocks from the original model for newer MacPacs
Staunton (Modified) Chess Set The Staunton chess set is composed of a style of chess pieces used in competitions. The journalist Nathaniel Cooke is credited with the design, and they are named after the English chess master Howard…
Can be printed without support
This is a recreation of @Rainers original Car phone mount https://www.printables.com/model/97310-car-phone-holder-samsung-cd-mount - this mount printed and worked almost perfectly for my requirements. I've just moved the front up a little…
I modified this for use with Tetrix pieces. This design has become my most popular and I want to credit it's original designer. See the remixed design Print Settings Printer: Qidi tech Rafts: Doesn't Matter Supports: Yes Resolution:…
A modified manual Turntable for 3D Scanning that doesn't need ball bearings or thruster. Just add any grease to the circle under the middle round platform. For it to stop moving on surface i bought non slip sticky pads on amazon and it…
Remix of the grain scoop by tray_withdraw at https://www.thingiverse.com/thing:3544205. Closed the hole in the handle, greatly increasing its strength and keeping stuff out of it.
I didn't want to spend the time needed to print certain parts of the https://www.printables.com/model/560402-stargate-with-iris-80cm-in-diameter Chevrons with supports that were difficult to clean later. I also needed the central light to…
Sanding Block - No Screws MODIFIED VERSION PETG, PLA, etc Layer height 0.3mm 3mf (and gcode) file pre-scaled 60% infill (doesn't really matter) No skirt or brim 25mm wide, about 33mm high and roughly 82.5mm long. Cut the sandpaper to…
All plate, modified LEGO Brick from the application LEGO Studio. 27 real Bricks LEGO (with the logo on it)
*** UPDATE *** Apparently the front arms (that I didn't modify) were an issue, so another user has done their own remix to fix those up too, which you can find here:…
BOM is the Same as the original, aside from the 8 magnets I used to hold the basket in place when rotating. (Fits my 18g ridgeless VST basket nicely) I used blind holes on my design to give the upper part a cleaner look. The use of a…
An Ender 3 (Pro) X-axis motor cover with a modified endstop mount to make full use of the bed in the X-direction. It always bugged me, that the leftmost 3 mm of the bed were out of reach for the nozzle on my Ender 3 Pro, because the…
I couldn't find this on Printables. This is not my work; I am only uploading with credit to the original from Thingiverse under CC. Original description from creator: This is a remix of Ed 209 from Robocop by GHathaway. Thanks for such a…
For English please roll down. CZ: Přepracovaná verze odklápěcího víka pro Original Prusa Enclosure Vlastnosti: nový systém zámků víka není potřeba otáčet víko = hladší víko bez závitových výstupků, ideální pokud používáte pro odkládání…
Adding a quick description for now. Elegoo published an adapter to allow for use of flexible filament with their CANVAS system for the Centauri Carbon 1 (and also CC2). However, it has a main problem: it does not work with the fittings…
Allgemeines Remix des bekannten “Top Mount spoolholder” für den Kingroon KP3s. Meine Version beinhaltet 3 wesentliche Änderungen: der Halter wird fest am Drucker verschraubt (benötigt 2stk M5x20 Innensechskantschrauben) der Haltearm wird…
This is a modification of Meister Edel design “strong flying propeller / pullcopter (No Suppoerts)” which sets off already quite fast and the flying propeller goes really high. Thank you for your nice design! But … I asked myself what to…
Im using an Ender V3 SE, print standing up, no supports necessary. .20mm speed
modified Bambu Lab Silica Gel Desiccant Tray, design by muddtt
Made To Fit The Vega 4x5 Camera . I have Performed a light lest by printing the Light test model in Black TPU and 0.8 mm, it has the same thickness as the Bellows. I can Confirm no light leak in the test model (at least to the eye), have…
The original was a bit too loose for me. This cover fits a bit better for my taste.
Modified CR90 pack For star wars armada. Designed for resin 3D printers, for best result print 0.02mm no AA. Larger scale with HD weapons coming soon. If you like my work and want to support me you can visit my Etsy shop:…
According to the MMU3 assembly instructions , you shouldn't print your own Nextruder main plate! Instead, Prusa recommends using the one supplied because FDM printing cannot produce the same quality. The kit also comes with an extra main…
All modified LEGO Brick from the application LEGO Studio. 18 real Bricks LEGO (with the logo on it)
I have not printed the modified grip module myself, I just did some surgery on my existing handset to make my modified mag release fit so I didn't have to print another grip module. This mod makes the mag release less floppy and more…
I couldn't find the correct barrel nut so i made my own! this is not a perfect solution, but I was able to get a good hold on a 16mm barrel using a kit of nuts and screws I had from a previous project (https://a.co/d/hldKSm2 ) Hardware…
I remixed the INVASION! The electric tea light UFO by Dr Kronos to add a tractor beam to support the UFO. You will need to go to his listing - https://www.printables.com/model/545824-invasion-the-electric-tea-light-ufo - for all files.…
I have NOT printed this remixed model myself. I sliced it with and without supports to see which one should print better. It appears that is might require minimal supports. I have printed my original model and use it, this was a special…
Note: You have to press it with some force down on the rail in order to fit. I had to use a wrench. Screen ribbon cable was too short for me. Had to remove cablestrains in order to fit. Orderer a new cable on AliExpress. Category: 3D…
This modified "Planter Netcup" has a small catch to prevent the net cups from tipping over when the plants grow too big. It is designed to dimensionally fit the net cups as shown in the picture. When screwing in the "Planter Netcup" into…
Jedná se o mírně upravenou kabelovou sponu pro výlisky PRUSA, kterou najdete v sadě tiskáren MK4. Neříkám, že původní klip neslouží dobře, ale někdy je pro mě těžké s ním manipulovat. Překreslil jsem tedy díl podle původního dílu ze…
The original is a great phone case! It fits great and protects well. I made a couple of quality of life improvements: Slightly enlarged the silent switch hole so I can switch the switch. Slightly enlarged the charge port hole so I can…
This is a small remix of mbunds's Doric-Style Pedestal scaled down, made more slender, and with a shorter base. The scale was chosen to match up roughly with other columns that have been uploaded on Thingiverse. Print Settings Printer…
Motivation (english) I use the MIK system on my bike, which allows you to clip anything onto the rack. But it is annoying that you cannot use the MIK adapter plate with Ortlieb pannier bags at the same time. The design of the MIK adapter…
UPDATE: Remixed for dual magnets per side, here http://www.thingiverse.com/thing:2093075 I had 3 mm x 1 mm cylindrical magnets sitting around. These did not fit into Dakanzla's bases particularly well (and it required many magnets). I've…
I love the Bug-A-Stock. A Stock for your Bug-a-salt gun attachment. it fit perfect on my 3.0 bug assault, but the stock for that file is a little boring and not adjustable. So I modified one that is to fit the attachment for it. here is…
Just added a hole to decrease prinzt time.
Remix of the ‘Larger slide cover’ by RasmusB, which is based on https://www.printables.com/model/411917-logitech-c922-webcam-cover-slide-to by codysechelski Remix differences from RasmusB's version Removed the gap between the body/button…
This a remixed version of the PRINTBED_GUIDE for Elegoo Neptune 3 pro by user 'x'. x's version works well but clashes with Bobbylebob's scrap bin (https://www.printables.com/model/456408-elegoo-neptune-3-pro-scrap-bin). My model is a…
The closed-body AD5X prints ABS well. However, there is a very large hole in the E6 part, through which a lot of warm air comes out of the printer chamber. There is no point in such a large hole, PTFE tubes do not bend so much and never…
