Search results: mrc

Sort order

136 models

P
Printablespralidox

AtomRC Dolphin motor mount with adapter

As many do, I broke my balsa motor mount and need a stronger one. Similar to others I found, but using M3 threaded inserts instead of nuts or direct threading. Adapts to my motor plate (the stock one) at 16mm x 16mm.

Print approx. €0.63–€0.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
83
Likes
5
Rating
5
P
Printablessamh

AtomRC Killer Whale - Wing Root Endplate for JX9 Connector

Wing root endplate for the AtomRC Killer Whale which allows you to mount a JX9 connector. The connector can be removed provided you don't glue the foam cover on top. The original foam cover can be used but requires a small amount of…

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
5
Rating
0
P
Printablessamh

AtomRC Killer Whale - Motor Mount + Low Profile Fairing

A motor mount and custom low-profile fairing for the Atom RC Killer Whale motor pods. The motor mount improves the cooling of the ESC area, and the fairing should be compatible with the original motor mounts (not tested!) The fairing…

Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
6
Rating
0
P
Printablespralidox

AtomRC Dolphin nose mount and cones

AtomRC Dolphin mounting system which interfaces between the balsa insert and foam, providing 3 x M3 6mm mounting holes. The greater goal is to have an aerodynamic mounting system to affix to the empennage which provides a universal…

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
5
Rating
0
P
PrintablesJadozub
18+

The source marked this model as adult content.

Downloads
992
Likes
495
Rating
5
P
PrintablesFAYRON

QUADMULA Siren F3 - IMRC Ghost Antenna Mount

A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3 To install the T-style antenna into the Mount, slide one side of the white part of the receiver into the mount, then flex the mount to about 90°…

Downloads
730
Likes
5
Rating
0

MRC24 - 3d printed micro RC Rock Crawler

MRC24 is a m icro RC R ock C rawler in approx. 1/ 24 scale using small hub motors to directly drive all wheels. It's a fun toy to climb slowly rocks and terrain. All main parts are 3d printed: chassis, front and rear axle. However, you…

Downloads
541
Likes
290
Rating
5
P
Printablespstimpel

Pimped 3D Printed Rc Truck V4.1 - Original by MrCrankyface

Pimped version of the OpenRC TruckV4 made by Mr.Crankface. Replaced rods by 3d printed ones, some adjustments to the center gearbox, and most important I added a second gearbox to allow the use of 540 motors. Print instructions Based on…

Downloads
285
Likes
31
Rating
0
P
PrintablesNotamed Closed

AtomRC Penguin Parts

Just some parts as I make them for my Penguin.

Downloads
277
Likes
16
Rating
0
P
Printablesbillyd

Atomrc Penguin Plastic Nose and Plastic Nose for Matek Airspeed Sensor and VTX Plate

***Update Oct. 28 2025*** I now include the stock vtx plate exact replica, STL and STEP files included This is a model of the atomrc penguin's plastic nose that screws on to the front. You can print one in any color to accent your…

Downloads
235
Likes
13
Rating
5

MRC full chassis kit for Scx24 in MILLIMETERS

hello, This chassis kit will require screws that you can get with an assortment kit from hobbypark on Amazon for Scx24. May require tapping for m1.4 screws cheap tap on ebay. File is in Millimeters for printing with JLC3DP for less than…

Downloads
176
Likes
31
Rating
0
P
PrintablesTim O'Brien

AtomRC Dolphin Better Motor Mount

A hugely improved motor mount for the epic AtomRC Dolphin FPV plane. It fits tight into the motor wire channel, adding much more mechanical stability so it won't just pop off on landing. It also actually has enough space for the screws to…

Downloads
174
Likes
14
Rating
0
P
PrintablesP.I.Engineer

atomrc penguin vtol parts

this works very well. my build: velox 2306 1750kv motors gemfan 6042 flash props spedix 30a esc stock motor on rear with 5126 lr prop gdw ds 041mg servo speedybee f405 wing cyclone gps/mag ELRS walksnail molicel p42 4s1p pack mid boom…

Downloads
165
Likes
16
Rating
0
P
Printablesdg fpv

atomrc dolphin - speedybee f405 wing + walksnail gps mount

bottom plate meant to be glued to the base of your wing in some way. I have used 5 dots of hot glue. 4x m3x4.2 insert nuts needed 4x M3 6mm screw needed

Downloads
154
Likes
15
Rating
0
P
PrintablesBunk

Rear Skid AtomRC Dolphin

Rear Skid Your choice which material will you use to print it. I did test petg, pla and ptu. I think best idea is to print it with tpu, becouse its easy to install, its flexible, so it ll fit well to the epp. Just squeeze IT ;) If you…

Downloads
153
Likes
9
Rating
0
P
Printablessupercrossed

AtomRC Dolphin Motor Mount 19x19mm

The AtomRC Dolphin motor mount is pretty weak, and barely glued in. This mount replaces the stock wooden one, with an insertable mount. There is an included 19x19mm plate which attaches via m3 bolts and screws into nuts on the mount. Best…

Downloads
153
Likes
3
Rating
0
P
PrintablesNatris

AtomRC Dolphin Front Hatch Cover

After losing my front hatch and seeing that a model is not available, I have made one. Hopefully it will be useful for someone out there. I have printed both hatch pieces in LW-PLA (3-4% infill, vertically from the cut between the pieces…

Downloads
131
Likes
7
Rating
0
P
PrintablesP.I.Engineer

atomrc penguin raised camera nose

gets camera out off the tip of the nose. matches stock nose for vtx mount

Downloads
130
Likes
10
Rating
5
P
PrintablesF. Mandel

AtomRC Penguin DJI O4 Pro

thanks to to “P.I. Engineer” for all the work, please give him a like.

Downloads
125
Likes
8
Rating
0
P
PrintablesMcLogo

AtomRC Penguin DJI O4 Pro Nose

AtomRC Penguin DJI O4 Pro Nose - can be printed in TPU Original by https://www.printables.com/@PIEngineer_580794 O4 pro mod by https://www.printables.com/@FMandel_11590

Downloads
122
Likes
7
Rating
0
P
Printablesdax.neal

Atomrc Dolphin Complete Kit

This kit is a mixture of remixed parts and original. The antenna mounts and O4 camera sleeve are in TPU while the motor mount is ABS with 30% infill and the rest is PLA with 2 walls and 5% infill. Both hatches were printed at fifty degree…

Downloads
119
Likes
5
Rating
0
P
PrintablesKeith Luneau

Atomrc Swordfish VTX Tray for Walksnail V1

This is a tray intended to make for a cleaner mount of the Walksnail VTX onto the Atomrc Swordfish. It fits into the fuselage using the stock nylon screw, and holds the transmitter, as well as the antennas. The transmitter is placed high…

Downloads
117
Likes
11
Rating
0
P
PrintablesHandsomePotato

AtomRC Penguin motorwires cover

I lost the tape that protects the motor wires, so I've designed this simple model to be glued into place

Downloads
114
Likes
6
Rating
0
P
PrintablesAmaZz0r

AtomRC Swordfish DJI O3 mount V1

--- update as of 170824 --- V2 is here: https://www.printables.com/de/model/977779-atomrc-swordfish-dji-o3-mount-v2 there is a remix by @NeariX_1729854 if you like v1 better than v2:…

Downloads
98
Likes
4
Rating
0
P
PrintablesMute916

AtomRC Gimbal v2 Drop In Conversion

I fully designed this in Solidworks from the ground up to convert the slide in style Gimbal v2 to a drop in style Gimbal. There are 2 versions. One with threaded insert option and 1 you screw straight into plastic. You will need to…

Downloads
90
Likes
8
Rating
0
P
Printablesmbrooker

Variant parts for MRC24

Some variant parts for Unboxingexperience7's MRC24 model.

Downloads
88
Likes
9
Rating
0
P
PrintablesP.I.Engineer

atomrc penguin motor plate

incase you need a quick replacement print in PETG DO NOT PRINT IN PLA, any kind of PLA, don't do it.

Downloads
87
Likes
5
Rating
0

MRC 6x6 frame for Scx24 conversion

this 6x6 chassis comes with everything expect hardware and mounts but I will separate post them. download the on axle link mount it works great! Thanks! MRC

Downloads
85
Likes
31
Rating
0
P
PrintablesF. Mandel

AtomRC Dolphin DJI O4 Pro

Made for DJI O4 Pro Air Unit

Downloads
83
Likes
7
Rating
0
P
PrintablesMax Ulrich

AtomRC Penguin Vifly Finder 2 Beeper Hatch

Replacement Hatch for the AtomRC Penguin Airplane Made to contain the Vifly Finder 2 Beeper Module

Downloads
79
Likes
8
Rating
0
P
PrintablesBeanTime

AtomRC Dolphin Insta360 Go 3 nose mount + FUSION SOURCE FILES

UNTESTED (but there's also source files so modifying it should be easy) I haven't actually received my dolphin in the mail yet, so my impatient ass made this while waiting. I know the GO 3 mount will fit though, I've used that part before.

Downloads
79
Likes
3
Rating
0
P
Printablessniperxnl

Atomrc Dolhin Dji o3 pan servo

Made my own pan servo for the Feetech FT90M servo What you need -Feetech FT90M servo -Epoxy -m2 x 20mm m2 -CA glue -PETG -2 screws to screw the servo in to the 3dprint (screws are in the servo package)

Downloads
71
Likes
6
Rating
0
P
Printablesfab

Penguin ATOMRC ESC cover spare

Penguin ATOMRC ESC cover spare to replace original one. Print it splitted in two parts, it willmake esaier the supports removal. You will have next to glue the two parts by using the rib surface to apply glue. I also printed it in PETG…

Downloads
70
Likes
1
Rating
0
P
PrintablesStrathpeffer3D

Gaugemaster / MRC Prodigy Express Holsters

Summary A set of holsters/brackets for use with the Gaugemaster (MRC) Prodigy Express DCC controller and base station. The controller holder will also work with the Prodigy Advanced controller. Notes: The controller holster is one part.…

Downloads
70
Likes
1
Rating
0
P
PrintablesmouseFPV

AtomRC Dolphin ESC Cover Weather Safe/Winter

Atomrc Dolphin ESC cover (low drag + high airflow) by Aspir3 is a fantastic esc cover and keeps the esc icy cool, however when landing in wet grass, or worse, snow, you get an esc bay full of water or packed with snow. Not ideal. This…

Downloads
70
Likes
5
Rating
0
P
PrintablesMaciek Mleczko

AtomRC Dolphin Motor mount

Holes are 3.2mm for M3 bolts, spaced on 34mm diameter. Slots for nuts are 5.6mm I printed this in PETG with 20% infill

Downloads
69
Likes
9
Rating
0
P
Printablesdg fpv

atomrc dolphin wing tip replacement + template

One side of the wing tip ripped off so I designed this one. I also uploaded a template for a precise cut at the right spot. It is not perfect but better then flying with a broken tip.

Downloads
69
Likes
6
Rating
0
P
Printablesnxp200

TCMMRC UR26 Mermaid Arm Guard

Simple arm guard for the TCMMRC UR26 Mermaid quadcopter frame. Allows passthrough of 2 motor screws to directly secure the motor, and the other two secure the TPU arm guard onto the frame arm and the motor as well.

Downloads
68
Likes
4
Rating
0
P
PrintablesAlex G

AtomRC Swordfish Canopy - FPV pan tilt

FPV canopy for AtomRC Swordfish with 9g servo mount and designed to house DJI O3 air unit. It will also work with any other VTX since you can use zipties to mount VTX in place. Features: 9g servo mount Outside VTX mount for ultimate air…

Downloads
68
Likes
10
Rating
0
P
PrintablesBunk

AtomRc Dolphin elevon

Atomrc Dolphin elevon Three different types: Plane elevon, you need to glue in servo horn andduct tape elevon to main part of the wing plane elevon with place for connectors to the wing (use 16mmx28mm) With place for horns and connectors…

Downloads
64
Likes
7
Rating
0
P
Printablesnxp200

TCMMRC UR26 Mermaid Front Chin Guard

Simple Front Chin Guard for TCMMRC UR26 Mermaid FPV Quadcopter Frame Print in TPU with no supports

Downloads
60
Likes
4
Rating
0
P
PrintablesDji Silesia

AtomRC Swordfish canopy

I wanted for my Swordfish to have FPV camera with maybe even an instrument panel. After a bit of tinkering, a couple of prints I came up with this. The canopy is designed to be printed as one piece, I used 1wall with 5 - 8 % infill. It…

Downloads
56
Likes
1
Rating
0
P
PrintablesDustan

AtomRC Dolphin moonlight nose

Print with LW PLA or your preferred filament. I used Inland LW PLA Orientation is laying so camera is up 2 shell 15% infill 4 top layers 4 bottom layers Slim Tree Support Buy me a coffee if you want, thanks for the support!…

Downloads
55
Likes
2
Rating
0
P
PrintablesStratos

AtomRC Dolphin Thumb Pro nose with 19mm camera mount

A nose for AtomRC Dolphin with space for Runcam Thumb Pro and a 19mm FPV camera. The antenna version has holes for stock Walksnail antennas (for the original V1 VRX with 2 antennas). There is also a hole for a ziptie to hold a VTX (or…

Downloads
55
Likes
5
Rating
0
P
PrintablesStratos

AtomRC Dolphin base plate

Simple remix of the original base plate, which adds holes for M2 nuts for “custom” mounting of anything. Also made a simple mount for the SpeedyBee F405-Wing flight controller.

Downloads
54
Likes
4
Rating
0
P
PrintablesPencilVesterr

Atomrc Dolphin FC Mount

Atomrc Dolphin FC Mount modified from GizFPV clean build to accept different electronics Atomrc F405Navi :FC CRFS Nano Pro :RX BN220 :GPS Skyzone TX2500 :VTX

Downloads
53
Likes
2
Rating
0
P
PrintablesAlex G

AtomRC Swordfish Canopy - plain

This is a "replacement" canopy for AtomRC Swordfish. This is just plain canopy with no mounts or something. It has enough clearance for 4s 21700. This model is not meant to be printed, rather, use it as a baseline for your own mods. Add…

Downloads
52
Likes
8
Rating
4
P
PrintablesSomeDaysMaybe

AtomRc Dolphin Pro Battery Tray

Batter Plate / Tray for the Dolphin Pro. Its not 100% perfect but sits 99% tight in spot and in the Corners. Printed with ASA CF 80 & infill. Rock solid. Leave a Like and have a good flight :)

Downloads
50
Likes
3
Rating
0
P
PrintablesJokerman518

Atomrc Dolphin Winglet Fin

Had a small crash and tore off one of the front winglets. I couldn't find one so I made this 3d builder using another file (I'm not the best at this). I sized it perfectly and then just cut the rest of winglet off then made a small slot…

Downloads
50
Likes
0
Rating
0

MRC24 front axle with 20° caster

new front axle with 20° caster to improve steering for my 3d printed 1/24 Rc crawler #MRC24

Downloads
49
Likes
5
Rating
5
P
PrintablesDionarap

Landinggear AtomRC Killer Whale

A langinggear for the AtomRC killer whale. It fits in the designated spot in the fuselage. You need M3 bolts and nuts to srew it in the fuselage. All the holes for the carbon rods are designed exactly 3mm so for easy assembly i recomend…

Downloads
48
Likes
5
Rating
0
P
PrintablesKorvette

Bit holder for soft grip snap on srewdriver (SGDMRC44B)

Remix of the snap on hard handle screw driver bit holder, just insert it in the hex hole in the cap. You can add a little bit of double sided tape to be sure it really doesn't move

Downloads
47
Likes
6
Rating
0

MRC Full chassis kit files in INCHES

same as the millimeter model but in inches for no conversion. Have fun printing

Downloads
45
Likes
17
Rating
0
P
Printablesck4xa

SteamRC Terminator / SAB CNC Ball Link Pliers Retainer

This is a retainer for the SteamRC Terminator CNC Ball Link Pliers (HZ051). It also fits the SAB CNC ball link pliers (HM073). The original plastic retainer broke off while my pliers were in my tool bag. Looking at the original retainer,…

Downloads
43
Likes
4
Rating
0
P
PrintablesMute916

AtomRC Dolphin Skid Plate ESC Cover

Originally made these to help protect the motor but turned out to be more than that. Enjoy! Different covers. From completely closed off to a tail fin skid plate. Choose between a thick or thin skid/fin Printed these at 0.1 layer height…

Downloads
42
Likes
4
Rating
0
P

ATOMRC Gimbal DJI O3 VTX cable tie mount

A basic mount for the DJI O3 VTX. Screws into the existing gimbal mounting wholes with the stock screws. The DJI o3 VTX is then cable tied on. There is a return channel for the VTX cables. The USB-C port should still be accessible if the…

Downloads
40
Likes
4
Rating
0
P
PrintablesSondre Hetland

AtomRC swordfish Pan servo gimbal for walksnail

This design is based on using parts from the original Atomrc one axis gimbal. The quick-release feature for easily transferring the gimbal between multiple platforms remains intact. The baseplate and servomount are printed side by side…

Downloads
38
Likes
7
Rating
0
P
PrintablesPencilVesterr

ATOMRC DOLPHIN ESC inlet Remix

Remix of szymansk design allowing for a heat sink to be placed on the ESC and easier support material

Downloads
38
Likes
1
Rating
0
P
PrintablesAmaZz0r

AtomRC Swordfish DJI O3 mount V2

the upper part also works with my tail cam mount for the volantex phoenix v2 2000: https://www.printables.com/de/model/908679-volantex-phoenix-dji-o3-tail-mount the upper parts are actually identical improvements: better look :D magnets…

Downloads
38
Likes
5
Rating
0
P
Printablesmc Seelachs

Atomrc Swordfish esc/motor cover

3d printed cover because atomrc didn't manage to send me some

Downloads
37
Likes
3
Rating
0
P
Printablesjonesjames001

MRC Laptop Stand

MRC Laptop Stand 1. Product Overview This adjustable laptop stand is 3D-printed with a modular design that combines sturdy support and ergonomic angle adjustment. Whether for office work, studying, or entertainment, it effectively raises…

Downloads
36
Likes
13
Rating
0
P
PrintablesmouseFPV

Atomrc dolphin 1 degree motor adapter extended

One degree motor adapter for dolphin. Tpu. Mount such that it's notch down. Print with PETG. Category: Other

Downloads
36
Likes
5
Rating
0
P
PrintablesMech_robot

ATOMRC 3D Print Pan Tilt Servo Camera Gimbal - Mini Talon

“I f you enjoy my work and would like to support me, consider contributing .” This is my UPI ID — mahendraguptha.97@oksbi ATOMRC 3D Print Pan Tilt Servo Camera Gimbal For Bottom Base Mount For Mini Talon

Downloads
35
Likes
5
Rating
0
P
Printablesrsilvers
Downloads
35
Likes
1
Rating
0
P
Printablessamh

AtomRC Killer Whale - Removable FC Tray

Custom flight controller tray and attachment rails for AtomRC Killer Whale. The rails are glued into the middle slot and should be pushed as rearwards as possible (see images). They are designed for M3x6mm threaded inserts with an OD of…

Downloads
34
Likes
4
Rating
0
P
PrintablesSuchit Mehrotra

AtomRC Dolphin Camera Mount 14mm

0.2MM Layer height.No Supports

Downloads
34
Likes
3
Rating
0
P
PrintablesComster

AtomRC Swordfish front 14mm camera mount

Simple camera mount for 14mm FPV cameras like the Runcam Phoenix 2 Nano on the AtomRC Swordfish.

Downloads
33
Likes
2
Rating
0
P
PrintablesMrJackson

MrCatBall

Toy ball with rattle for your feline. MrCatBall.stl is the full ball with rattle inside. You'll probably need supports/raft. After printing use a screwdriver to pop the internal ball loose. MrCatBall-Half.stl is half of the ball, if you…

Downloads
33
Likes
2
Rating
5
P
Printablessamh

AtomRC Killer Whale - Matek Optical Flow/Lidar Sensor Mount

Landing gear alternative insert for the AtomRC Killer Whale that allows for flush mounting of the combined Matek Systems Optical Flow and Lidar sensor. As a fixed-wing, only the lidar is of use, so a hole for the lidar sensor is included…

Downloads
33
Likes
0
Rating
0
P
PrintablesJunorion

MRC THUNDER KING PARTS - Compatible with Desert Thunder and Baja King.

*This set does not include Ball End Joints or any plastic shock/gear components. I started this project just needing to replace the Nose Piece and eventually I made replacements for all the plastic parts on the truck. It may be important…

Downloads
31
Likes
8
Rating
0
P
Printablessamh

AtomRC Killer Whale - Skids

Skids for the AtomRC Killer Whale fuselage to allow for belly landings and belly takeoffs without damaging the underside of the aircraft. The provided file is cut in half to fit on a Prusa Mini bed, and can be mirrored to print the second…

Downloads
31
Likes
3
Rating
0
P
PrintablesSilentCamille

19x19 AtomRC Dolphin Motor Adapter

An old design that i've made, to install a bigger motor on my dolphin wing. Used Esun PLA+ with 100% infill. Strong materials are recommended, even if I didn't have any issue with it braking. Also add some glue to the back, the small…

Downloads
30
Likes
1
Rating
0
P
PrintablesBunk

Atomrc Dolphin action 2 mount

As above, mount for action 2 to dolphin fpv wing E: today while flying was 32 Celcius and my dji action 2 overheated- designed more cooling version 2 options: to print with TPU to print with polilite pla and install camera in tpu insert.…

Downloads
30
Likes
4
Rating
5
P
Printablesvaxxi

Wider shock mounts for MrCrankyface V4 RC Truck

The shocks I got were a bit thicker and didn't fit the mounts properly. Created these which push the shock head a bit to the side, while letting the screw go deeper into the mount (you can use the same screws). Also added a side wall, so…

Downloads
30
Likes
3
Rating
0
P
PrintablesRJD2

AtomRC Dolphin ESC Cover

AtomRC Dolphin esc plate. Print with no top layers or bottom layers to use your infill as ventilation Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG…

Downloads
29
Likes
3
Rating
0
P
PrintablesAndy F

AtomRC Seal Hatch Latch

After a crash with my AtomRC Seal, the latch that secures the hatch was nowhere to be found, so I modeled up this little replacement. you need: M3 threaded rod cut around 35mm. I cut down an M3 bolt I had 1x M3 nut 1x 7/32"x11/16"…

Downloads
28
Likes
1
Rating
0
P
PrintablesPencilVesterr

ATOMRC Dolphin FC Mount Blank

Remix of FC tray from "Ultra clean Atomrc Dolphin build - GizFPV" allowing for full customization of parts/placement. Shout out to GizFPV as I was just in the process of making a FC tray that fits the entire bay when he uploaded his.

Downloads
28
Likes
1
Rating
0
P
PrintablesSondre Hetland

Lidar cover for Atomrc Swordfish

Designed for the TF-Luna Lidar used with a Atomrc swordfish modified for VTOL. Seperate file for wheel delete without lidar sensor. Support my work: All of my models are available for free. If you'd like to show your appreciation,…

Downloads
24
Likes
6
Rating
0
P
PrintablesPencilVesterr

Atomrc Dolphin FPV Tilt Mount

Tilt Mount / Nose Cone for the Atomrc Dolphin Only tried with analog so far but would probably fit a digital camera too. Nose cone should provide ample airflow into flight compartments Requires 1x 9gram servo and slight modification to…

Downloads
24
Likes
3
Rating
0
P
Printablessetupfpv

atomrc swordfish wing protector

wing protection during landing for atomrc swordfish. Glue from below closer to the end of the wing. Prevents contact with the ground and prevents it from getting caught on branches. https://youtu.be/00Q0_87mVUY

Downloads
23
Likes
2
Rating
0
P
PrintablesAntoni Małecki

AtomRC Dolphin Pro Wing Vortex Generator

The larger of the 2 vortex generators on the dolphin pro.

Downloads
23
Likes
2
Rating
0
P
Printablesrsilvers

AR900 / RMRC Recruit DJI FPV Air Unit Mount

Goals were to encourage more airflow with curves, have the Air Unit to be retained with a snap in fit, have more room for the cables wedged between the camera and unit, and have the camera much closer to the front so that it could be…

Downloads
23
Likes
3
Rating
0
P
PrintablesDaegara

AtomRC Dolphin ESC heatsink scoop base

An air-scoop / heatsink-mount combo for use with Aspir3's excellent AtomRC Dolphin ESC v12 cover - https://www.thingiverse.com/thing:5147951 Sealing the edge of the heatsink to the base with epoxy creates a watertight ESC cooling…

Downloads
22
Likes
3
Rating
0
P
PrintablesCataclysm5

Camlock Vacuum Adapter for Bosch GOF 1600 CE / Bosch MRC23EVSK Router

Camlock Vacuum Adapter for Bosch GOF 1600 CE / Bosch MRC23EVSK Router. Snug fit without the need for PTFE tape.

Downloads
22
Likes
4
Rating
0
P
Printablesme8myself

AtomRC Gimbal Dual antenna Walksnail GT2

Gives you a little wiggle room for the mccx connector and the height of the GT2 itself. use a m2 nut on top to fasten down the attachment. I have really gone down the deep end on getting this gimbal to work with my gear, really should…

Downloads
22
Likes
1
Rating
0
P
Printablescooljs78

MRCOOL line set bracket

A bracket I created for my MRCOOL line set that I mounted inside my garage to keep the lines nice and snug and parallel.

Downloads
22
Likes
2
Rating
0
P
PrintablesHybridkunst

AtomRC Swordfish DJI O3 Nose mount

I think I ony reused the very precise surface decribing the fusleage shape and the cutout-shape. All credit goes to Gizfpv. As he shared his fusion-files, I'll share at least a step-file since I'm not working with fusion.…

Downloads
20
Likes
7
Rating
0
P
Printablesfab

DJI O4Lite canopy for Penguin AtomRC

Adaptation of existing design to get lighter installation, possibility to use 21700LiIon pack, and good air cooling flow and protection for DJIO4Lite module. 3 Rear ducts on rear panels improved a lot the cooling by creating succion to…

Downloads
20
Likes
3
Rating
0
P
Printablesfmckeogh

AtomRC Theer Bat DJI O4 Air Unit Pro Skeletonized Mount

The provided files only support the O3 Air Unit, this is a mount for the O4 Air Unit Pro. Friction-fit, but a strap through the existing holes should work. I'm just a beginner with CAD so may need a touch up by someone more experienced.…

Downloads
19
Likes
4
Rating
0

1/10th MRC EXCLUSIVE! BODY SHELL 313MM PRINTABLE!!!!!! AWESOME!!!!

the longest piece is only 9.72in long. super easy to print. will have to mirror the mirror for the passenger side of the truck. best printed in PETG and mirror in TPU. my truck is currently printed in PLA and it pretty durable. check out…

Downloads
18
Likes
6
Rating
5
P
PrintablesMech_robot

Atomrc Flying Fish Bldc Motor Mount

Atomrc Flying Fish Fixed-wing Aircraft This model is used as motor mount “I f you enjoy my work and would like to support me, consider contributing .” This is my UPI ID — mahendraguptha.97@oksbi

Downloads
18
Likes
2
Rating
0
P
PrintablesDustan

AtomRC Dolphin Pan Nose

Print with LW PLA or your preferred filament. I used Inland LW PLA Orientation is laying so nose is up 2 shell 15% infill 4 top layers 4 bottom layers Slim Tree Support Buy me a coffee if you want, thanks for the support!…

Downloads
17
Likes
1
Rating
0
P
PrintablesRJD2

Atomrc Dolphin Insta360 go 2 Gopro nose

Gopro shape for the insta360 go 2 to be installed into the atomrc dolphin nose. Requires cutting the gopro nose foam to fit the insta360. Print vertical with lens at top with supports Print Settings Printer Brand: Creality Printer: Ender…

Downloads
17
Likes
1
Rating
0
P

AtomRC Beluga - AtomRC F405 Navi Mini FC Tray Mount

I'm not fond of using only double sided tape to mount flight controllers to airplanes fuselages, so this FC tray mount for the AtomRC Beluga addresses this problem. The mount is designed only for the AtomRC F405 Wing Mini and its mounting…

Downloads
17
Likes
1
Rating
0
P
PrintablesMkto00

AtomRC Dolphin canopy 3D scan

High-accuracy 3D scan of the stock front canopy (hatch) for the AtomRC Dolphin FPV plane.

Downloads
17
Likes
2
Rating
0
P
PrintablesRJD2

Atomrc Dolphin Caddx Vista Insta360 go 2 Pan Reinforced Remix

I printed it in PETG, 0.6 nozzle and 20% infill. Any nozzle size will do. No supports required. Printed standing up as it would be mounted to the servo Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…

Downloads
16
Likes
1
Rating
0
P
PrintablesRoiS

AtomRC Swordfish Walksnail VTX Pan Mount

Take your FPV experience to the next level with this custom-designed mount for the ATOMRC Swordfish. This all-in-one mounting solution is specifically engineered to cleanly integrate a Walksnail Avatar digital VTX, the FPV camera, and…

Downloads
16
Likes
0
Rating
0
P
Printablesecho2papa2

RMRC Nano Skyhunter HS1177/VTX/Antenna mount

This is an all in one FPV mount for the Nano Skyhunter, it might work on other planes. It is designed for a standard HS1177 FPV camera, a Matek VTX-HV, including a mount for the SMA bulkhead that comes with the VTX. I glued it to the deck…

Downloads
15
Likes
3
Rating
0
P
PrintablesStratos

ATOMRC Dolphin short nose with 19mm camera

The “nut” replaces the magnets and is glued in. You need to create a hole and cut into the hole horizontal and vertical slits for it to get a grip. It is designed for M3 screw (it screws directly into the plastic). I suggest printing the…

Downloads
15
Likes
1
Rating
0
P
Printablesraketemensch

Insta360/Peanut mount for the AR Wing/AR 900/RMRC Recruit

I use the action camera slot on this wing for my DJI camera, and I really wanted to mount an action camera for stabilized footage. This mount uses the original FPV camera slot. It slides in the spot very cleanly, although I also use hot…

Downloads
14
Likes
0
Rating
0