29,651 models
This is a digital 3D printable model of Hornet’s Needle from the Hollow Knight Silksong video game. Designed as a human-sized cosplay prop! 😁 Features 2 versions - smooth and textured. 📦 Included Files STL (cut for 200mm printer beds) STL…
Print approx. €30.52–€37.31 excl. taxPreliminary estimate for one variant
As soon as my Core One arrived, it was clear that the easiest way to perform many maintenance tasks is to remove the top panel, but removing and replacing the plastic pop rivets is cumbersome. The solution used for this model is to create…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Author: Emmett Lalish & ShawnGano Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Waste object (with wipe into infill) is pliers by…
Print approx. €2.93–€3.59 excl. taxPreliminary estimate for one variant
This is a model of the Atreides Signet Ring from the movie Dune. You can find more of our Dune models like the box of pain or bull statue here The download contains the model ready to be 3D printed. It is placed on the print bed as we…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
D20 Dice Box – Magnetic Hey maker! 👋 A practical and stylish D20 dice box with a secure magnetic lid. Features: Designed for 5×5 mm round magnets for a snug closure. Works with flatter magnets using a printed spacer. Secure transport and…
Print approx. €5.02–€6.14 excl. taxPreliminary estimate for one variant
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Because I couldn’t find a pill organizer with a clean and appealing design, I created this compact weekly pill organizer that allows you to easily pour out your medication. Each drawer snaps into place using integrated magnets , giving a…
Print approx. €3.22–€3.94 excl. taxPreliminary estimate for one variant
This is a remix. I didn't design this nice model, I've only converted it in STL and added a base. The original model and author here https://sketchfab.com/3d-models/spiral-a4e84079db884dddbc2e980b44ce8cfd kylie Printed @0.15mm with PLA:…
Print approx. €8.48–€10.36 excl. taxPreliminary estimate for one variant
This is a mount for the new Starlink Mini antenna. It has spacers that can be scaled in the Z axis to adjust for different van roof ribs. They also act as a cable wrap for the 50 foot cable that comes with it. For the 2023 RAM Promaster I…
Print approx. €17.03–€20.82 excl. taxPreliminary estimate for PETGSource material: PET
I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Not everyone likes putting their Apple AirPods Max into the bra between each use. I designed this to provide a place to easily rest your AirPod max headphones. The magnets will sleep the headphones saving your battery. I print this at…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
A fun little fish-shaped refrigerator magnet! The fridge magnet is actually quite strong because it uses (3) 6.4x6.4x2.5mm neodymium-iron-boron (rare-earth) block magnets, which are embedded in the body during printing (shown in the…
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
A perfectly designed gear bearing that is made to have minimal friction and is easy to 3D print it can also spin for up to 7 seconds! It's quick to print coming in at under 2 hours. This print also is beginner friendly and has a big…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
EN - English A set of stamps designed for ceramic production. These stamps are created with an emphasis on easy of use and flexibility. A magnet is integrated behind the 0.2 mm layer of both parts of the stamps, allowing the printing part…
Print approx. €4.87–€5.95 excl. taxPreliminary estimate for one variant
Magnetic Whiteboard Pen Holder Magnetic holder for 4 whiteboard pens. The magnets used are 4 round/cylindrical neodymium magnets (20x3 mm). I use the following magnets: https://www.amazon.de/dp/B088FN6YN6 The magnets are inserted during…
Print approx. €4.03–€4.93 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Improved MMU2 selector with rectangular slot for magnet found in Prusa MK3S/MMU2S kit parts. This is a modification of the E2 version of MMU2 selector mod by emanuvele, inspired by same modification of the previsous V9 version done by…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
All 3d-printed parts, including axles. Proof of concept, it doesn't really move much air - hand cranking at a reasonable pace, you can feel a little bit of movement. 1:8 gear ratio seems to be a bit of a sweet spot, but there's likely too…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Hinged Dice Vault With Magnets Parts List 10mm x 3mm neodymium disc magnets CA glue 7 piece dice set Instructions Print with 2 walls, 15% infill of your choice, and no supports. Insert a pause on the layer that the magnet holes are…
Print approx. €7.25–€8.86 excl. taxPreliminary estimate for one variant
Flexible elephant suitable as a decoration, a toy for children, or as a magnet for a refrigerator. Print instructions speed 0,2mm infil 20% filament PLA
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for one variant
It is a unique and mesmerizing ring box that unfolds. Printing Each part should be printed 3 times. Print at a 0.1/0.15mm layer hight and a 0.4mm nozzle for better results. Assembly Assemlbe the parts together with M2 screws and washers…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Cockpit Kit: Freewing Models R/C 90mm EDF F-18c Hornet This is a 1/11th scale cockpit kit designed for the 90mm EDF Freewing F-18C Hornet Fighter Jet. Included are the STL Files, a printed parts list, detail photos for painting, assembly…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
I entered last competition with Skeleton theme soap dish, so it would be fun to make it as a tradition ! For this competition I modelled in Blender Full body skeleton with 6x3mm magnet connection holes. Had to make small changes to…
Print approx. €11.04–€13.50 excl. taxPreliminary estimate for one variant
Magnetka v designu známého seriálu. Vlastní výroby. Model s vloženým magnetem ("neviditelný magnet"). Vložení neodymového magnetu o průměru 1cm a výšce cca 2mm. (při změně velikosti se změní velikost magnetu. Barva: černá a červená Tisk.…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Don't like your groceries list being obscured by huge refrigerator magnets that are to flat to grab them. Maybe give this quick, one coloured print a try and finally get rid of those last 40 cm of your old Prusament Galaxy Silver spool!…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
The same great Fish Refrigerator Magnet , only smaller! Size decreased by 55%. Cuteness increased by 200%. Magnet consumption reduced by 66%! What's not to love?! Similarly to the original, a print pause is used to insert (1x)…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Molvinets / Pomluvnik diameter approx. 50mm Molvinets (also known as Pomluvník ) is an ancient Slavic protective symbol (an obereg ) designed to shield a person from the negative power of the spoken word. According to Slavic tradition,…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Wall Socket Refrigerator Magnet with universal hole pattern for 2 to 4 pieces of magnets ⌀4 - 10 mm x height of 2 or 3 mm are uploaded. Please let me know, if you need different holes for your magnets. Support material is only needed…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
This is a small jig to make square cuts using a japanese hand saw. After printing you can just pop the magnets into the holes. I used 8x3 mm neodym magnets like these: https://www.amazon.de/gp/product/B007KZGADE. They give great support…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Color change at 9.4mm (Optional) Want MORE? Visit the CHIP CLIP COLLECTION
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Just a 2D Mandalorian helmet. Slap any magnet you want on the back and VOILA!!! Included print file includes a color change. .stl also included Enjoy! And If you have a minute, check out my other models!…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill pattern: Archimedean Chords Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant
Stackable Print-in-place planetary gears with two different sized links. Stack and connect the sun and planet gears to each other in any way you like. Depending on your printer's tolerances, the gears might run loose or tight. As a guide,…
Print approx. €4.44–€5.43 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for one variant
A magnetic push pin for holding notes/papers to refrigerators, whiteboards, or any other magnetic surface. I have created two versions of this model based on two different sized magnets. The small version uses a Magcraft P/N: NSN0601/N40…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This was made to have a very tight fit with the magnet so that glue wouldn't be required. Depending on your magnet manufacturer, you may need to resize the width and height by a tenth of a millimeter or so. I printed with 0.20mm layer…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
I designed this portafilter funnel, because I didn’t find any that looked nice, cleared my mill and had magnets instead of using the lugs of the portafilter. So I made this nice funnel. You’ll need 6mm diameter magnets with 3mm thickness…
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
Here is a Gridfinity baseplate designed to save filament and magnets. It still uses the default 6x2mm magnets in the same positions and is compatible with other gridfinity bins and models. There is an included STEP file so you can make it…
Print approx. €5.13–€6.27 excl. taxPreliminary estimate for one variant
printed with 0.15 layer height Prusament PLA, Pinapple Yellow, Jet Black and Lipstick Red. Added an extra layer for the red cheeks and made three pockets for magnet size Ø 6x3 mm.
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
The "Parametric Magnetic Hinged Box" is a 3D model made with FreeCAD. Designed with different needs in mind, it offers a hinged lid and magnetic fasteners for a secure close. It's versatile and perfect for multiple uses, like lunch boxes,…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Hello! Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps. This is a work in progress (W.I.P.) as it's not the easiest print using FDM printers, yet. Update 2022-09-07…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Denver Broncos Magnet
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Om dat mijn zoon last heeft van de Aziatische hoornaar liet hij mij een Aziatische hoornaars val zien met wat uitleg. Zo ben ik dan begonnen met te tekenen, en printen. De val kan maar begin volgend jaar getest worden. De aanvallen…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
This is my model of TARS from the movie Interstellar. TARS body consist of 4 legs, this model uses magnets to form joints and keep everything together. The magnetic joints slides along the full leg length which makes for a very flexible…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Toolholder for wall mounting your festool centrotec and fastfix attachments. If you only plan to hang your centrotec attachments, you can just print the first part. If you plan to use the fastfix part you should print the second part.…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Plug the 20mm holes in your MFT or similar table with these plugs and prevent small objects from falling through. Insert a M5 metal washer to make the plugs magnetic and easily removable. Use different colors to visually identify your…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
I printed a couple of copies of @Adam 's most excellent rock scent-training capsule recently: https://www.printables.com/model/295199-scent-trainer-rock and was impressed with both the concept and execution. As an aside - I've also…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Dust collection is a difficult challenge with any bandsaw. Mine is a King Industrial KC-1433FXR and came with a very inefficient and essentially useless dust collection solution so I came up with this 2 part dust collection duct that is…
Print approx. €13.36–€16.33 excl. taxPreliminary estimate for one variant
This is a print in place case with magnetic closing to store small items. The design uses an optionally printed inlay tray that holds Nintendo Switch game catridges and SD cards. Bill of Material (BOM) You will need some magnets for the…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
A newer and better version of my magnetic fidget gear design. Magnets are now encased, and the overall shape is more comfortable to hold and use. The brilliant idea to use a 608 bearing for smoother action was suggested by ImpatientMaker…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
I want to be able to easily remove my printer from my enclosure for maintenance. While the collets on the MMU3 make it quite easy to remove the PTFE tubes, I worry that it wears on the tubes and/or collets on every removal and insertion.…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This is a magnetic holder for temperature sensors. You'll need a 8x4 or 8x3 mm magnet. There are three versions of the holder. The smallest one should work with sensors of ~4 mm in diameter, the middle one fits sensors of around 4.9 - 5…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
I love the original fish magnet from kennyd1gital but I don't have the exact magnet size, so I made this remix for 8x3mm magnets. You can stick a maximum of 3 magnets in, but in my opinion 2 are enough :) Please also give a like to…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
I have several times accidentally hit the Netflix button while watching other things. So now this exists. This was designed for PETG, but PLA or any rigid filament will probably work too. This was NOT designed for flexible filaments as…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Clip for a pool skimmer net. It's usefull for fastening a pool skimmer net into a pole. But could be usefull also for other appliances… EDIT: added parametrized version… you can change any length, diameter parameter in Fusion 360 “Change…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Purge trays for connecting with magnets to your XL build plate. Use the stop to put in the magnets. No need for support. I used a brim.
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
for assembly you will need: 1x ring gear 1x center gear 3x planet gear 1x body 1 1x body 2 3x M3x8 Screw
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
This is a magnetic cannon (Gauss cannon) for your GRAVITRAX marble run. For the assembly you also need a strong neodymium magnet with the dimensions 20x5mm. In addition, I recommend that you use two 3M screws and nuts to assemble the…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended top infill pattern: Archimedean Chords Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
This model is a magnetic chalk clip designed for Triangle chalk, but any chalk of the same dimension should work (as they are all roughly the same size). There is a magnet embedded in the chalk holder and the chalk clip so that the clip…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
McDonnell Douglas F-18 Hornet fighter jet Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
Two piece magnetic scissor holder, using 10x2mm round magnets. The two pieces interlock but should be glued together for best results. The magnets are intended to be glued in the recesses in the back. I used a gel superglue and the…
Print approx. €2.61–€3.20 excl. taxPreliminary estimate for one variant
Aard, Axii, Igni, Quen, Yrden You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Netsuke : Where the Wild Things Jar
Print approx. €12.28–€15.01 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
This rackmount adapter is designed to mount the TP-Link OC200 controller in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for PETGSource material: PET
Hygrometer - https://amzn.eu/d/1nIj0yG Most of the Amazon ones are the same, as long as the dimensions are 48mm x 28.6mm Magnet - https://amzn.eu/d/4x4VSJl 3 x Magnet Size: Dia. 6mm x Height 3mm Hygrometer to be close to my plexiglass…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
A clasical signet ring with a stylistically Prusament pattern on the top side. Print instructions: Print it with the Topside of the Ring on the Printbed
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Semi Hydroponics - Netcup 4.5" NO SUPPORT for hydroponics
Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant
This low-profile under-cabinet mount for the kitchen perfectly positions your iPad for using cooking apps or streaming movies and music while cooking, while also swinging up and out of sight when not in use. It could also be useful in a…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
The magnet-ready version is available as a 3MF file. The hole is modeled as a negative cylinder, allowing you to easily adjust its size to match your specific magnets
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
Use this to set up your bed leveling correct. On the photo you can see, in the front right corner it is too far away, and in the front left too near. Print this, adjust your bed screws and then print again. Category: 3D Printing Tests
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
The parts shown in the picture broke on my trampoline I modeled a replacement for everyone to use. Print settings don't matter almost at all, the part is made for 3d printing and should be printable with the vast majority of materials. I…
Print approx. €1.98–€2.41 excl. taxPreliminary estimate for PETGSource material: PET
===Update=== Stand added ===Update=== Instax Mini Magnetic Fridge Frames, with an overall thickness of only 3mm. I recomend the textured sheet for a shiny surface finish. The frames can be equipped with magnets (6mm x 3mm x 1.5mm) to…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
A simple bracket for the Netgear GS108E . It has small holes so you can see the power LED and retain access to the factory reset button. It fits very snugly and you'll have to relocate the rubber pads slightly (or you can remove them…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
you've got the tennis paddles and ball from 3Dovanos ( https://www.prusaprinters.org/prints/26450 ) ? Now just need the net. Use this portable net this any table. For net you cant use wool thread, prusment filement,... for th ecomplete…
Print approx. €11.25–€13.75 excl. taxPreliminary estimate for one variant
Magnetic holder designed for 5×5×5 mm magnets, intended to be attached to the original Starlink mini pipe adapter. All parameters (such as magnet and pipe size) can be adjusted in the SCAD file. This model is not meant for use on a moving…
Print approx. €5.67–€6.93 excl. taxPreliminary estimate for PETGSource material: PET
I often encountered the problem that I had to cut open my net pots when I wanted to transfer or harvest plants (see picture below) in my hydroponic system. Therefore I have designed a few net pots that can be opened and closed in order to…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
Magnetic insert with hidden three 6mm magnets with arbitrary thickness. Magnets should not need to be glued, they should hold by the friction (mine do). Even with “standard” 6x2 neodymium magnets (e.g., usable with Gridfinity) it can hold…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
I found the spec sized magnets were a tight fit, so I made a punch to smack them in place with a hammer. Also a pin for the jaw for those who don't have the right sized fasteners on hand. Cheers!
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
I discovered a free-to-use Santa Claus clipart online and converted it into an SVG file using Adobe Illustrator. From there, I designed a multicolored 3D-printable model, specifically for use with a multicolor 3D printer. To assemble:…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET
Simple organizer for your small bathroom tools like tweezers, nail clippers, and nail files. It adheres to the back of a medicine cabinet mirror with double sided tape and is small enough to fit between most medicine cabinet shelves. The…
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
Sekce 1 modul=1,25 centrální kolo 12 zubu (Sun A 12Z) planeta 24 zubu (Planet A 24Z B 12Z) koruna 60 zubu (Ring A 60Z) roztec 22,5mm sekce 2 modul=1,071 centralni kolo 30 zubu (Sun B 30Z) planeta 12 zubu (Planet A 24Z B 12Z) sestaveni…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
A simple holder to mount my Netatmo Rain Gauge to a flat wooden pole. Printed with PETG for UV resistance and 100% infill for stability (might be not necessary). Paint on Support below the plate (see gcode file)
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for PETGSource material: PET
Simple remix to include two spots on the back for 2 6x3mm magnets for easily attaching to things.
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
The model guides saw blades along two sides, which are designed to hold magnets with a diameter of 8mm and 3mm depth. The holes have a tight fit, if it comes to loose, the magnets can also be glued in place. It has a grove which can be…
Print approx. €5.50–€6.73 excl. taxPreliminary estimate for PETGSource material: PET
These body mounts allow you to mount the Injora IR60 body on the Redcat Ascent 18 truck. The body hinges on the rear about 120°, allowing it to stay open by itself and have full access to the internals. The front magnetic latch uses two…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
![Skeleton [Refrigerator Magnet]](https://media.printables.com/media/prints/218804/images/1999824_ef024956-fe97-47fa-bc4d-b47d4fc6f789/0f347690-3a88-4947-84ce-f7cb67769895.jpeg)
