Search results: nozzl

Sort order

Counting matching models…

P
PrintablesPrusa Research

MK4S Nozzle Replacement Tool

Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…

Downloads
16,176
Likes
2,560
Rating
4.88
P
Printablesfifindr

Silicone / Caulk Cartridge Finishing Nozzle Tips

No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…

Downloads
7,852
Likes
2,550
Rating
4.87
P
Printables3DPreviews

E3D V6 Nozzle Holder - Nozzle Holder - Nozzle Case

Here is my holder for my E3D V6 Nozzles. It is designed so that the nozzles can screw into the casing to keep them nice and secure. This case will also hold and M6x1 nozzles such as clones. Enjoy! Print instructions Print at 0.1mm layer…

Downloads
6,706
Likes
1,288
Rating
4.46
P
Printablesfifindr

Caulk / Silicone Nozzle Cleaner

A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…

Downloads
5,739
Likes
1,799
Rating
4.77
P
PrintablesmoWerk

Pool Filter Cartridge Cleaner | Gardena Pressure Nozzle

High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter. From the outside,…

Downloads
2,318
Likes
472
Rating
5
P
Printablessteve457

Milwaukee M18 Stubby Nozzle - FUEL Blower Model 3017-20

This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…

Downloads
2,310
Likes
208
Rating
5
P
PrintablesCulinaryDiver

PET Bottle Foamer for Garden Hose and Modular nozzles - VENTURI INJECTION

This foamer uses the Venturi effect as an injection method, no pressurized systems Gardena-compatible hose connector Interchangeable screw-on nozzles: spray, jet, foam, and fan(only the foam nozzle works at high pressure with the…

Downloads
2,087
Likes
1,409
Rating
4.6
P
Printableswallydoggy

3D Printing Nozzle Sculpture

I have made an extruding nozzle sculpture/trophy/award. There are three pieces to this model: The base, which has no special printing recommendations. The extrusion pile, which should be printed with supports on overhangs greater than 70°…

Downloads
2,010
Likes
891
Rating
4.98
P
PrintablesLinus

CORE One Nozzle Replacement Tool for E3D Nozzles (e.g. ObXidian HF)

tl;dr If you want to switch between E3D nozzles on your CORE One, you should use this tool instead of the original. Because for E3D nozzles the heater block needs to be installed higher, the original nozzle replacement tool is…

Downloads
1,970
Likes
436
Rating
4.96
P
PrintablesLegufix

MK4 Nextruder nozzle change tool

Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…

Downloads
1,957
Likes
371
Rating
4.94
P
PrintablesMuddledRemarks

Super Stubby Nozzle for Milwaukee M18 Fuel Blower

Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…

Downloads
1,830
Likes
230
Rating
5
P
PrintablesS3BR4

Prusa CORE One Nozzle Wiper

This is a Nozzle Wiper for the CORE One that uses a A1 style silicone brush. You will need a knock off Bambu Lab A1 wiper brush. I got mine from Ali Express. 6 for €1.20. Just make sure they come with adhesive tape at the bottom. You will…

Downloads
1,281
Likes
553
Rating
4.93
P
PrintablesmoWerk

Pool & Hot Tub Filter Cartridge Cleaner | Gardena Pressure Nozzle | Compact Remix

Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…

Downloads
1,230
Likes
393
Rating
5
P
Printablesrosenbjerg

Hidden Nozzle Drawer - Ender 3

Nozzle drawer with room for 20 MK8 nozzles. Could easily carry more on the downwards-facing side. Let me know if you would like such a version. The drawer fits perfectly snug for my print, but that will depend on print settings and…

Downloads
1,141
Likes
279
Rating
4.31
P
PrintablesForker45

Shop Vac - 3” Wide Nozzle

The included nozzle for my 2.25" Shop Vac has never been “just right” for vacuuming out a vehicle. It’s also been a little too narrow for my needs. I've been using it mainly for cleaning up my pellet grill, so I was in need of a “clean”…

Downloads
1,063
Likes
124
Rating
5
P
PrintablesCNC Kitchen

Prusa CORE One Magnetic Nozzle

Fits 20x5x2 mm or 20x6x2 mm magnets: https://geni.us/sWgcaKw (affiliate)

Downloads
912
Likes
462
Rating
4.84
P
PrintablesMaxim7745

Nozzle Z Offset Search - Generic Version

Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…

Downloads
904
Likes
48
Rating
5
P
PrintablesWiktor

figet nozzle V1 and V2

version v2 model is now available (:

Downloads
879
Likes
35
Rating
4.67
P
PrintablesModu

Turbo Fan / Jet Fan - Magnetic Nozzle (15mm)

This is an alternative nozzle for a Turbo Fan/Jet Fan, featuring much higher nozzle pressure than the stock version. In my opinion, it offers the perfect balance between pressure and airflow. There's a small notch on one side, which…

Downloads
856
Likes
135
Rating
5
P
PrintablesTmpx64

V6 Nozzle Box Remix

I needed a smaller version, so I shrank Reven’s Nozzle Box a bit. The hinges have been reinforced, making it suitable for printing at 0.25 or 0.30 mm layer height. It still delivers that satisfying click when closing. If you’d like to…

Downloads
851
Likes
317
Rating
4.75
P
Printablesrayjizza

Nozzle Spinning Top

Which nozzle is the best in it´s spinning top version? Easy to print easy to have fun with. Just… let it rip! If you want a different nozzle version just let me know and send me a imagen in the comments Print instructions Print the…

Downloads
847
Likes
201
Rating
4.88
P
PrintablesGralastair Bean

fast 30 min temperature & bridging tower MK4S HF nozzle

Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…

Downloads
812
Likes
87
Rating
4.8
P
PrintablesFiz105

PRUSA XL Temperature Tower .4mm nozzle PLA,PETG

Just download the G code and print!

Downloads
757
Likes
37
Rating
3.5
P
Printableskrizo96

Silicone Cartrige Nozzle Cap

Have you misplaced your silicone nozzle cap? Maybe you just didn't get it in the package (like in my case)? Well, here you go! It's the perfect length and taper for the nozzle. The threads are modeled so it screws on and off easily! It's…

Downloads
669
Likes
104
Rating
4.67
P
Printablesbkerler

Prusa CORE One L (C1L) Nozzle Wiper

As I wasn't able to find any working nozzle wiper for Core One L due to design changes made, I had to redesign my own one :) Designing and testing took quite a while and DOESN'T break air ventilation opener, so I'd be happy if you leave a…

Downloads
666
Likes
286
Rating
4.96
P
Printablesaxe

E3D Revo nozzle holder

E3D Revo nozzle holder. It can hold up to 6 nozzles. Enjoy! Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15%

Downloads
660
Likes
95
Rating
5

Great Stuff Replacement Nozzle

A replacement straw for “Great Stuff” spray foam canisters. If you're like me, you have many small jobs, but after one use, the straw becomes clogged and unusable. With this model you can print your own and reuse a partially spent can…

Downloads
618
Likes
68
Rating
5
P
Printablesdecrefy

coke bottle nozzle

If you like my work and would like to see more, please consider buying me a coffee I needed a bottle for wood glue and I needed something cost effective. buying bottles specifically for decanting wood glue, wrecking the bottle with glue…

Downloads
596
Likes
125
Rating
5
P
PrintablesKevin Barker

Gridfinity Bin for Prusa Nextruder Nozzles

There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…

Downloads
567
Likes
146
Rating
5
P
Printableshorrovac

Silicone cartridge nozzle/cap

Standard silicone cartridge nozzles are too wasteful for my taste - you have to push out a great volume of material to fill them and get it going out of the nozzle. Also, there's never one around when you need it, because they're…

Downloads
510
Likes
85
Rating
4.86
P

Prusa XL Nozzle Scrubber / Brush

Here's my design of a Prusa XL Nozzle Scrubber / Brush. There are tools for correct assembly, brush holder and filament collector. Drawn in Fusion 360 Print instructions ¤ Remenber to use tree support on Brush holder ¤ Use .3mf or .gcode…

Downloads
394
Likes
59
Rating
4.85
P
PrintablesBaGooN

2 in 1 Size Revo Nozzle Removal Tool

Some of my nozzles have lost their silicone sock, so I wanted a removal tool for it. This tool is available in both sizes, with and without silicone socks. The way to use this tool is to loosen the screw while pressing it against the…

Downloads
382
Likes
76
Rating
4.94
P
PrintablesCreeps

Dyson V8 Tight space nozzle

I designed this to use under my fireplace where I can't reach with other nozzles. I know this aren't an ideal design, but it works for me. Use the “up-top adapter” to adjust the angle of the nozzle. There is a small tolerance at the…

Downloads
348
Likes
33
Rating
4.25
P
PrintablesDocWeebl

Revo Nozzle Holder

My design for a modular E3D Revo nozzle holder. I wanted something that fitted to my printer (PrusaMK3s), wasn't too large, could take at least 3 nozzles and looked a bit funky. UPDATE - This design has been expanded and is now compatible…

Downloads
346
Likes
78
Rating
4.94
P
PrintablesBunsenbrenner14

Bullet / Banzai Bill Nozzle Holder (Magnetic)

Remix of Martin Moores Bullet Bill / Banzai Bill model to store 19 E3D V6 / Volcano nozzles. You can customize your Bullet Bill to store everything you want. Theres a magnetic and a screw version available. Nozzles are locked in place by…

Downloads
340
Likes
143
Rating
5

Vacuum cleaner crevice nozzle d35mm (extension possible)

Crevice tool for vacuum cleaners with tube diameter d35 mm (tested on Thomson). Possible extension from 120 mm nozzle up to 280 mm. Printed with Pusament PETG. Layer height 0.3 mm should be enough since its not a mechanicaly exposed part…

Downloads
328
Likes
44
Rating
5
P
PrintablesGrez

REVO Nozzle Holder (i3MK)

Nozzle holder for Revo labeled w/ 0.25, 0.40, 0.60 & 0.80mm sizes. Print file is for the color change version shown.

Downloads
327
Likes
52
Rating
4.5
P
PrintablesSvanGool

Prusa Automatic Nozzle Cleaner for remote control (Octoprint)

Prusa Automatic Nozzle Cleaner This solution is for the Prusa MK-series printers, that don't really have an out-of-print area, most solutions will either collide during bed-leveling or can't coop with the PINDA-sensor. If your printer…

Downloads
325
Likes
157
Rating
0
P
PrintablesJerrari

(LEGACY) Lack Drawer With Nozzle Inserts

Keep those nozzles handy with the Nozzle Insert Lack Drawer. This Lack Drawer is compatible with my Lack Enclosure Drawer series. Features: • Seamless alignment for that oh-so-clean look. • Lack Drawers also include optional slots for…

Downloads
316
Likes
130
Rating
5
P
PrintablesA Regis

MK4 Nozzle Tray

A simple tray to hold the .25, .3, .4, .6, and .8 MK4 nozzles.

Downloads
304
Likes
90
Rating
5
P
Printablesmscalora

Parameterized Shop Vac Nozzle

Designed a shop vac nozzle for my brother that has a slot shaped entrance. Fully parameterized for all the critical dimensions. I printed in PLA with 6 perimeters and an internal brim.

Downloads
297
Likes
36
Rating
5
P
Printablesrac2030

LAY-Z-SPA Inlet Nozzle Side Jet diverter

Inlet Nozzle for LAY-Z-SPA connector (post 2019) that diverts the water flow to the side. This is just a re-upload of the original creation of CoquetTech which I found on thangs.com and want to use as a base for Remixes but it is not my…

Downloads
283
Likes
18
Rating
5
P
Printableslunch211

Numatic Henry Hoover Vacuum Hose Nozzle

I created the Henry replacement nut (see here) out of necessity, and now I am doing the same with the other end of the hose! This is designed to work with the standard hoses Numatic supply (32mm), and standard poles and accessories. In…

Downloads
257
Likes
34
Rating
5
P
PrintablesGezz

Core One nozzle replacement (change) tool

Update Versions - “No Magnet - 10mm magnet - 10mm magnet Version 2 - 12mm magnet” Holds the heat block in position vertically and horizontally - files (four versions) can be modified to allow for varying magnet sizes. Small magnets may…

Downloads
229
Likes
80
Rating
4.83
P
PrintablesPavel Rampas

Silicone Sealant Nozzle

For OpenSCAD you need download threads.scad by Dan Kirshner. https://dkprojects.net/openscad-threads/ https://dkprojects.net/openscad-threads/threads.scad

Downloads
221
Likes
49
Rating
5
P
PrintablesBaGooN

Jagged Nozzle Cleaner

It is better to use a filament that is resistant to heat, which will last longer. It is assumed that one thing cannot be used indefinitely, and that when it is damaged, a new one should be printed. Print settings: Layer height: 0.2mm…

Downloads
206
Likes
39
Rating
5
P
Printableskaje

ShopVac Small Crevice Nozzle - Long Version

This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard…

Downloads
191
Likes
22
Rating
4.5
P
Printablesclairelg

Pond Fountain Nozzle

Remix from https://www.thingiverse.com/thing:2172585

Downloads
188
Likes
14
Rating
0
P
Printablessteffanders

E3D Revo nozzle Revolver

I liked the idea of axe's nozzle holder, but 6 slots is too little space for me. So I changed the box a bit and use the space between the heatbreakes from the other side. In order to use the space in the middle and to save filament, a…

Downloads
183
Likes
44
Rating
4.88
P
Printablesddpt

Blow gun nozzle. Embout pistolet de compresseur

Pas de support. Remplissage 100 %. 0.15 mm. Prusament PETG Clear.

Downloads
183
Likes
22
Rating
5
P
PrintablesYannick Swinnen

Nozzle Holder Prusa XL

Nozzle holder for the Prusa XL with packaging. Since I really liked the packaging tubes on the nextruder nozzles, I wanted to have a place to put the nozzles in their packaging onto the Prusa XL. This holder still allows you to read the…

Downloads
176
Likes
57
Rating
5
P
PrintablesD3ni511

DM Air Freshener to Airwick Nozzle

This nozzle is to make DM Air Freshener refill work in an Airwick auto dispenser. It is made with conically narrowing inside, to make it dispense the aerosol as best as possible. It can even replace the original Airwick nozzle on an…

Downloads
175
Likes
7
Rating
0
P
Printablessteve457

Rigid Blower Stubby Nozzle

This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…

Downloads
175
Likes
16
Rating
5
P
PrintablesIhýk

Pool Waterfall Nozzle (One Piece)

Jedná se o zremixovanou trysku z modelu Pool Waterfall, kdy jsem složil trysku do jednoho kusu, bez mezimatice. Není potřeba těsnění mezi trysku a trubku. Tisknout lze z jednoho kusu, ale použil jsem límec (brim)

Downloads
172
Likes
9
Rating
0
P
Printablesphi

Nozzle Holder Cap

Simple cap that fits at the top of the Z-Axis hex hole. I only have 3 different nozzles, and having it displayed on my printer helps me remember which one is installed. This is made for the right side Z-Axis. If anyone would like one on…

Downloads
166
Likes
33
Rating
4.88
P
PrintablesMatanU

E3D Revo Nozzles Expandable Storage Box

Storage box for E3D Revo nozzles with option to expand existing storage to any number of nozzles

Downloads
157
Likes
33
Rating
4.17
P
Printablesalexxxx
18+

The source marked this model as adult content.

Downloads
155
Likes
72
Rating
5
P
PrintablesThebigfoot

Hoover freedom family vacuum cleaner custom nozzle

I've designed this custom nozzle to clean medium-sized surfaces like desks and drawers without using the large “mop style” rotating brush used for the floor. It works also great to clean car seats and large surfaces. I've printed my in…

Downloads
147
Likes
17
Rating
5
P
Printablesbuchnema

Air Pump Nozzle

I really like large air pumps like the 10 PSI Quechua from Decathlon because they move huge air volumes in little time. But they are mainly made for tents, boats, kites or mattresses. You can't inflate toys, swimming aids or children's…

Downloads
145
Likes
14
Rating
0
P
PrintablesMidknight

Dyson Narrow Adapter/Nozzle

Having seen several adapters throughout the major 3d model sites I wasn't sure they would fit for my older model Stick Vac and Standup. I am new to the 3D printing world and am reintroducing myself back into 3D design as its been awhile.…

Downloads
144
Likes
21
Rating
5
P
Printablesgsatelite

Churro Nozzle Rev.0

Churro Nozzle 0.4 tolerance to allow a comfortable bag fitting. Updated star design How to use it: -Put the nozzle inside the bag. -Fit the Bag through the nut securing the nozzle at a corner. -Cut the bag to reveal the nozzle. Note: Use…

Downloads
140
Likes
3
Rating
0
P
PrintablesDomiGijzen

Nozzle - Wiley X Vapor Comm 2.5 - Novritsch AntiFog

This nozzle can be used with the Novritsch Anti-Fog unit (using 9mm tubing) and Wiley X glasses using comm temples. Comm temples can be recognized by their thin layout, suitable for use with over ear headset. The nozzle inlet is oriented…

Downloads
138
Likes
4
Rating
0
P
PrintablesLK74

Small watering can sprinkler nozzle - Embout pour petit arrosoir

Water your plants more evenly with this adapter/nozzle Arrosez vos plantes de manière plus homogène grace à cet embout d'arrosage Za pomocą tej dyszy podlewaj rośliny bardziej równomiernie

Downloads
132
Likes
6
Rating
0
P
PrintablesKIJO

Laundry Detergent Nozzle EZ Lever

Laundry detergent nozzle attachment, designed to make dispensing laundry detergent and fabric softener more convenient. Print each piece separately, then assemble the lever, base, and axle. Place the device over the nozzle and secure in…

Downloads
131
Likes
50
Rating
0
P
PrintablesTräd-E

Massage shower head with exchangable nozzle.

Update 3.3.2026 Added a slight angle on every second output slit to create a wider, cone shaped showerprofile. Added two more brimtabs and did some minor fixes on the model.. I also took 0.15mm off the impeller width as it was…

Downloads
131
Likes
29
Rating
0
P
PrintablesJ. Anzicek

Motivational ear savers - 11pcs with 0.6mm nozzle 56 minutes

These are motivational message ear savers for use with surgical masks. I have optimized print settings for 0.6mm nozzle on Prusa I3 MK3S printers. I am using amazon basics PETG. Print instructions The settings are in the file. These print…

Downloads
131
Likes
8
Rating
5
P
PrintablesMuelb

REVO Nozzle Box

Nozzle Box for EVO nozzles. Made in PETG. Storage space for 7 Nozzles.

Downloads
123
Likes
24
Rating
4.67
P
Printablesplabs.cz

Gridfinity bin for MK4S nozzle replacement tool (silicone sock/no silicone sock)

I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.

Downloads
122
Likes
22
Rating
5
P
PrintablesRazi Berg

Revo Nozzle Holder (20mm Extrusion)

Reverse engineered the original design so a STEP file is added.

Downloads
121
Likes
16
Rating
5
P
PrintablesAstroStock

Ortur LU2-10A Laser - Air Assist Nozzle

This is an air assist nozzle for the Ortur LU2-10A. It features 4 very strong neodymium magnets 5mm in diameter by 5mm in thickness and a 3/32" od brass tube. The magnets protrude just about the surface enough to fit into the impressions…

Downloads
121
Likes
8
Rating
0
P
Printableseap6rda

Vacuum Nozzle Head & Button - Dyson

Introduction (English / French / Italiano) EN: The locking button on a few accessories of my (great) Dyson Vacuum cleaner had broken and could not buy it as a single spare part. I also lost my nozzle head for corners and tight spots….. I…

Downloads
121
Likes
10
Rating
5
P
PrintablesSimone Rossetto

Smaller suction nozzle for Black&Decker Dustbuster

I needed a smaller nozzle for my handheld vacuum, so I designed an adapter and a nozzle. The adapter should be printed with a flexible filament in order to have grip on the original vacuum nozzle, while the new nozzle can be printed in…

Downloads
120
Likes
16
Rating
0
P
Printablesromcoromcoromco

Fogger nozzle expander

Fogger nozzle expander

Downloads
109
Likes
16
Rating
0
P
Printablescq

Infinitely Extendable Long Tube Nozzle - Dyson >=V7

A useful end to get into tight spaces, print as many extensions to make it as long as you want. Great for sideboard, side of fridges, tight spaces… There are 2 parts, the base and the extenders. The Extenders push on and twist to lock on.…

Downloads
108
Likes
19
Rating
0
P
PrintablesNeva

vacuum cleaner nozzle thin and long

vacuum cleaner nozzle thin and long

Downloads
105
Likes
12
Rating
0
P
Printablescrokobacon

Raspberry Pi Camera Adjustable Mount (nozzle view) + X axis strain relief for Prusa Mini - no supports [LEGACY]

THIS IS A OLD VERSION! new one here ! --------------------------------------------------- Hi all, i was using another Pi Cam mount for my Prusa Mini but it wasn't adjustable so i made one by myself: This is a Raspberry Pi Camera mount…

Downloads
104
Likes
54
Rating
3
P
PrintablesManu

Embout d'aspirateur pour MK.. - Vacuum cleaner nozzle for MK..

tout est dans le titre. Sur la base du partage de Zivbot https://www.thingiverse.com/thing:1571860 , merci à lui. Bon print à vous. @+ Everything is in the title. Knowing the basis of Zivbot's share…

Downloads
102
Likes
7
Rating
0
P
PrintablesOkojo

Gridfinity Mk4 Nozzle Tools Holder

The Nextruder Nozzle Wrench and Nextruder Heater Block Clamp are the most important combination of tools IMHO if you intend to regularly swap nozzles on your Mk4. So, I made this 1x2x4 gridfinity bin to keep them close by your printer.…

Downloads
102
Likes
24
Rating
5
P
PrintablesTheDarkHood

Prusa Core One Gantry Wiper - Wipe Your Nozzle at ANY Time During a Print

Summary This is a nozzle wiper for the Prusa CORE One which mounts to the gantry. This allows for wiping the nozzle at any point during a print. The installation is toolless and easily reversable. This was inspired by the Nozzle Wiper V2…

Downloads
97
Likes
66
Rating
1
P
PrintablesAirFelix

Nozzle Holder 0.6, 0.4, 0.25 for Prusa Mini Y-Axis Top

This is a remixed version of https://www.prusaprinters.org/prints/42178-nozzle-holder-cap for the Prusa Mini. The Nozzle Holder fits on top of the y Axis using the screw holes. Print with 6 Top Layers, 15% Infill, 0,2mm layer height,…

Downloads
97
Likes
21
Rating
4.67
P
PrintablesTickTock

Prusa XL Nozzle Brush Holder

The only change I made from the standard 0.2mm structural profile was to increase the perimeters to 3 to give more support to the screws. Line up the T-slot nuts within 1-2mm of their holes before installing. Screw each in loosely so you…

Downloads
93
Likes
40
Rating
5
P
Printablessebasgot

Wallet Nozzle y Tapas de 0,2mm-0,25mm-0,4mm-0,6mm-0,8mm

Wallet Nozzle, es sencilla, Pequeña, puedes tener de varios tamaños de nozzle, fácil de imprimir con cualquier material. Para colocar el gatillo, empujado hasta el orifico, puedes ayudarte con una llave L. La tapa de identificación entra…

Downloads
91
Likes
28
Rating
5
P
PrintablesAndré Chaves

Ender 3 V3 KE and SE automatic nozzle cleaning brush PROCEDURE

M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate M140 S[bed_temperature_initial_layer_single] ;Set final bed temperature G28 ;Home all axes G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up M104 S[nozzle_temperature_initial_layer]…

Downloads
88
Likes
24
Rating
0
P
PrintablesWICKID

Nozzle Cleaner - Voron Trident

Been searching for a nozzle wiper mount to add to my Voron Trident. It seems there are my models for the Voron 2.4 but only limited options for the Trident. so I came up with this. It is mountable on the bed extrusion using 3 M5x12 from…

Downloads
88
Likes
22
Rating
0
P
Printableskonradmb

Dyson DC19/DC20 stair tool (nozzle, brush)

Original Dyson part number 906960-11 Does it differ from the original? Yes, although it's functionally the same. I haven't added those weird ovals around the outlet. I don't think they add much to structural strength. Underside brush is…

Downloads
88
Likes
14
Rating
0
P
PrintablesBenschCraft

Vorwerk VT270 vaccum cleaner nozzle adapter

found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG

Downloads
87
Likes
8
Rating
0
P
PrintablesStefan

Prusa MK4 Nextruder Nozzle Holder

Nextruder Nozzle Holder with box, up to 7 Nozzles MK4_Nextruder_Nozzle_Holder_v2.obj: The column in the middle is ~10mm higher

Downloads
85
Likes
23
Rating
5
P
PrintablesJ. Anzicek

Motivational message ear savers for quick print 0.4mm nozzle

11pcs of motivational ear savers print time is about 1:10 (1hr 10minutes) I have had good results with amazon basics PETG and MG chemicals PETG. This is for 0.4mm nozzle equipped I3 MK3S printers. Print instructions Setting are included…

Downloads
82
Likes
1
Rating
0
P
PrintablesClamikra

3DO Nozzle Camera Mount for Prusa i3 MK3S+

Update: there is this improved Version of my model . I found the HiRes nozzlecam by 3DO with 4K resolution and a high quality Sony video chip on the web. A nice improvement over the standard endoscope type nozzle cams you find on Amazon…

Downloads
82
Likes
32
Rating
0
P
PrintablesJosef Drapák

Hadicová regulační zavlažovací tryska / Irrigation nozzle with regulation

Tryska a rukojeť - bez podpěr s límcem. Tělo - podpěry všude a větší límec. Výplň 100%, kvalita 0,20 mm STRUCTURAL, materiál PETG. Pro správnou funkci je potřeba tělo trysky opatřit “O” kroužkem 14x3 NBR a po připojení na hadici použít…

Downloads
79
Likes
13
Rating
0
P
PrintablesT_K

Prusa MK4, Nextruder nozzle box

I needed a safer storage for my spare nozzles so i made this to replace the plastic bag the spare nozzle came in. This is for a single nozzle which i prefer over boxes with multiple nozzles in my sparepart kit. Easy print, text can also…

Downloads
78
Likes
10
Rating
5
P
PrintablesDaniel Vitanza

"Chinese" Mellow Fly ADXL345 Holders for Nozzle and Bed

Two parts that are remix of two distinct designs to fit a "chinese" mellow fly adxl345 to your V6 nozzle and prusa bed. I personally re-designed them for an “aliexpress” mellow fly pcb and for my prusa mk3 (but it should work for any V6…

Downloads
77
Likes
7
Rating
0
P
Printablesfr1d0

Nozzle on hose for vacuum cleaner (Siemens, Bosch, Grimi, Krups, Pitsos)

The nozzle connects the hose to the vacuum cleaner. According to multiple websites it is compatible with devices from Siemens, Bosch, Grimi, Krups and Pitsos. For 35 mm Ø hose (Hose outer diameter 40mm). I personally used it for the…

Downloads
73
Likes
9
Rating
0

Watering can nozzle replacement

The white nozzle / cap on my green watering can I bought at Home Depot several years ago cracked. This is my quick attempt at replacing it. Print it upside-down for best results (sorry I didn't design it that way!).

Downloads
70
Likes
8
Rating
5
P
PrintablesTriggl3r

Nextruder Nozzle Wrench

Made for Prusa MK4 and Prusa XL but fits with every E3D nozzle. You can use it with the Prusa Nozzle Replacement Tools. No supports needed.

Downloads
70
Likes
6
Rating
4
P
PrintablesPlatzhalter

HAZET 2162M grease gun - holder for second nozzle

This is a holder for the second nozzle that comes with the HAZET 2162M grease gun. If you, like me, don't know where to put it this comes in handy. The nozzle is secured by a tight fit that wraps around the thread by more than 180°.…

Downloads
68
Likes
12
Rating
5
P
PrintablesBotWithWrench

MK4 Nozzle Replacement Tool - No Tab

The first two times I tried to use this tool it became stuck onto my tool head so stiffly that I had to rip apart the model to get it off. This could be because I was using a fairly stiff/tough PLA, but regardless of the reason it was…

Downloads
67
Likes
8
Rating
0
P
Printablescrokobacon

Nozzle view cam adjustable mount for Raspberry Pi Camera (Circular and Square)

UPDATE : just made a new version with other adjustments. Now the cam is a little more in a back position than before. _________________________________ Hi all, I couldn't find a proper Pi camera mount with a real nozzle view so i made one…

Downloads
66
Likes
17
Rating
3
P
Printablesgrk

Automatic nozzle cleaning station

EN: Printed PET-G into a nightmare, after heating the nozzle, some of the material sags and you have to pick it up with tweezers - so it doesn't get under the print. I haven't found any holder that fits me and that would be universal, so…

Downloads
64
Likes
17
Rating
0
P
PrintablesMachi

Enclosure Nozzle Size Label

Single or Dual-color nozzle size label for Original Prusa Enclosure and Prusa XL 1 a 2 extruder printer. For a perfect look and blend with the cover, I recommend printing in the color combination of Prusa Galaxy Black and Prusa Orange.…

Downloads
63
Likes
15
Rating
5