Search results: p32

Sort order

2,865 models

P
Printablesbriancmoses

ESP32 D1 Mini Case

I was inspired to design this ESP32 D1 Mini case after writing a blog about using the ESP32 D1 Mini and ESPresense to incorporate room-specific presence detection in my Home Automation . After using someone else's design, I thought it'd…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
3,827
Likes
366
Rating
4.92
P
PrintablesTeraflop

Teyleten Robot ESP32-S3-WROOM-1 Case

This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…

Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,669
Likes
172
Rating
4.9
P
PrintablesMan-in-Black

ESP32 case for ESP-WROOM-32D

I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
1,951
Likes
140
Rating
5
P
Printablesphsete

ESP32-C6-DEVKIT-M-1 Case

Print both the lid and the body. The ESP32-C6-DEVKIT-M-1 can be pressed in and should be held in by friction. The tolerances are designed for this purpose. I printed it on my Ender 3 with Prusament PLA Galaxy Black and 0.2mm Layer Height…

Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant

Downloads
840
Likes
33
Rating
4
P
PrintablesPeter Farell
18+

The source marked this model as adult content.

Print approx. €13.51–€16.52 excl. taxPreliminary estimate for one variant

Downloads
795
Likes
148
Rating
5
P
PrintablesSten

ESP32 Audio Kit V2.2 Housing

The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too). SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible. The RESET and…

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
634
Likes
32
Rating
0
P
Printablesbkgoodman

ESP32 D1 Mini Snap-Together Case

Quick print to house ESP32 D1 Mini. Snaps together with cutouts for USB, LEDs and a paper-clip hole for reset.

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
554
Likes
57
Rating
5
P
Printablesso meone

Fast Print ESP32 WEMOS S2 Mini Case with Buttons

You absolutely need to use arachne/variable extrusion width to print this. The outer walls vary from 0.38-0.6mm to provide the snapping action for the lid while still using only 1 “perimeter” to allow fast printing. The reset and…

Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant

Downloads
509
Likes
28
Rating
0
P
Printablesmarcin212

Seed Studio XIAO ESP32S3 Sense Housing

This 3D enclosure is designed to securely house the Seed Studio XIAO ESP32S3 Sense, providing both protection and easy access to key components. The compact case ensures a snug fit while leaving essential ports and sensors exposed for…

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
282
Likes
18
Rating
0
P
PrintablesFlat Badger

Freenove ESP32-Wrover CAM Mount - Prusa MK3 & MK4

A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…

Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
273
Likes
32
Rating
5
P

ESP32-CAM Mount for Prusa MINI (X-Axis stepper motor)

This is an enclosure to mount an ESP32-CAM on X-Axis stepper motor. LONG CAM CABLE NEEDED! (I used ov2640 with 75mm cable). Inspired by similar mounts for pi cams and customized for ESP32-CAM and Prusa Mini. Case is the same in both…

Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
211
Likes
37
Rating
5
P
PrintablesYetti

ESP32 Wroom Case with Sensor SHT31

Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
204
Likes
17
Rating
0
P
PrintablesGerald

MK4+MK4S ESP32 Cam Mount

Camera Mount for MK4(S) suitable for Part of MK4 "x-end-motor-R2.stl2" No support

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
192
Likes
59
Rating
4.8
P
PrintablesBooRad

Wemos D1 Mini ESP32 motion sensor case

A simple case for a complete motion sensor setup using a Wemos D1 Mini ESP32, AM312 PIR sensor and a simple light-dependent resistor. Hardware list: Wemos d1 mini esp32 (or equivalent) AM312 PIR Light-dependent resistor Note: Supports…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
20
Rating
2.5
P
PrintablesCrets

Flipper Zero NRF24 + ESP32 Case MMU

Built to suit the wifi multiboard found on Aliexpress:…

Print approx. €3.10–€3.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
127
Likes
24
Rating
0
P
PrintablesDave D

Keltec P32 Magazine Speedloader (and P3AT)

Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print…

Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant

Downloads
113
Likes
8
Rating
5
P
Printablesmkronmiller

Seeed Studio XIAO ESP32C6 Micro Case

I wanted to make a small case that protected the Xiao while also making things look a little cleaner. This is the smallest possible case I'm personally able to design and it snaps together pretty easily (though it is a tight fit). I…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
107
Likes
3
Rating
0
P
PrintablesMrLogston

ESP32CamCaseV2pt2

printed at 99% scaled size to create tight fit on the ESP32-CAM Opening the provided ESP32CamCaseV2pt2.3mf file with PrusaSlicer will enable you to view the negative volume modifiers I used, and allow you to create your own gcode for…

Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant

Downloads
92
Likes
7
Rating
0
P
PrintablesRobagon3D

Overhead ESP32-CAM Door Mount for Printer Enclosure

This is an ESP32-CAM case that mounts to the top of the inside glass of a 3D printing enclosure and prints without supports. This case fits Version #1 of the MCU board as described by detailed JohnyHV HERE . It may fit version #2 but I…

Print approx. €2.67–€3.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
83
Likes
8
Rating
5
P
PrintablesTronnic

ESP Home IR-Receiver (ESP32 CH340 KY-022 IR Receiver)

Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
8
Rating
5
P
PrintablesJordan Smith

Prusa Mini Horizontal ESP32 Camera Mount

Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…

Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
7
Rating
5
P
Printableswerz 99

Core One Camera Case for ESP32-CAM

Just made a wider bore in the frontpart (10.2mm) for a 120° Wideangle Camera. All other parts remain the same. Camera: https://de.aliexpress.com/item/1005007291555550.html

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
38
Likes
8
Rating
5
P
PrintablesTonyPTX

ESP32 Max v1.0 Quad Thermocouple Housing w/Display

This is a basic box to mount an ESP32 Max v1.0 Development board and four single MAX6675 modules (spi bus) that are compatible with K-Type thermocouples and a local display (i2c bus). The intent of this project was to be able to remotely…

Print approx. €6.89–€8.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
35
Likes
6
Rating
5
P
PrintablesTonyPTX

ESP32 Max v1.0 Garage Door Housing w/Relay

This is a basic box to mount an ESP32 Max v1.0 Development board (Arduino UNO Clone) with a single channel 5V relay and a BMP280 temperature sensor (should work w/BME280 as well) to interface with a garage door opener utilizing a…

Print approx. €4.15–€5.08 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
6
Rating
4
P
PrintablesGlen Robertson

waveshare ESP32-S3 1.45 Round Display dev board with glass basic case

I used PLA with 0.20mm structural on prusa. When inserting device, put USB-C in first while ensuring it is aligned with the opening's center. The device is very fragile, so don't pull it out by the screen or the screen can come off!

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
1
Rating
0
P
PrintablesApfelhobbit

Solar - Camerastation for an ESP32 Cam

Camerastation for an ESP32 Cam with a solarpanel and button for battery charging. With the right programming, it could be controlled via web browser, your smartphone, etc. I recommend printing it split in half!

Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
6
Rating
0
P
Printablesnorthendtrooper

Seeed Studio ESP32C6 + HiLetgo MAX98357 + CQRobot Speaker Case for Home Assistant

Seeed Studio ESP32C6 + HiLetgo MAX98357 + CQRobot Speaker Case Dimensions: Speaker - https://mans.io/item/cqrobot/cqrlb4o3w-b Amplifier - https://www.adafruit.com/product/3006 ESP32C6 - https://www.espboards.dev/esp32/xiao-esp32c6/ No…

Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
1
Rating
0
P
Printablesbkgoodman

ESP32-CAM Case

Has cutouts for illumination LED and camera, as well as buttons on the side for the two buttons on-board.

Downloads
14,426
Likes
650
Rating
4.7
P
PrintablesPLAUK

ESP32-WROOM-32 (USB-C) Box with Lid

ESP32-WROOM-32 Box (USB-C) A small box with snap-fit removable lid for the ESP32-WROOM-32 development board. Pins are still accessible from the underside via two slots. Please note this is for the 28mm x 52mm (approx.) PCB, this is the…

Downloads
9,051
Likes
763
Rating
5
P
PrintablesPredy

ESP32 Case

If you want to support my work, just buy me a coffee: paypal.me/predypavlovic Case for ESP32 dev board No screws required Ventilation openings Can be mounted without unplugging the circuit board Includes housing with and without pin…

Downloads
7,884
Likes
861
Rating
4.96
P
PrintablesMihai

esp32-case

OpenSCAD sedigned case for the esp32 development board. Thanks to Sergio Vilches for the rounded corners!

Downloads
6,512
Likes
558
Rating
4.75
P
Printablesbkgoodman

ESP32 Devkit V1 "Chunky" Case

ESP32 Devkit V1 Case w/ Snap-on lid with button detents and cutouts for USB, LEDs and pin access. This case is thick enough so that the pins are completely shielded inside the case, though accessible for connection. IF you want a version…

Downloads
5,341
Likes
187
Rating
4.68
P
PrintablesMarius M

CASE ESP32 2432S028 USB-C Module - Cheap Yellow Display (CYD) / CYD2USB

Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.

Downloads
4,969
Likes
272
Rating
4.91
P
PrintablesJosselin Hefti

ESP32 C3 Super mini MODEL

ESP32 C3 Super mini 3D MODEL - .STEP - .f3z

Downloads
4,758
Likes
173
Rating
5
P
PrintablesMichal Fanta

ESP32 camera case

This case is intended for the Articulated arm mounted on the Original Prusa printer.

Downloads
4,496
Likes
803
Rating
4.93
P
Printablesjcvg

ESP32 C3/C6/H2/S3 Super Mini Case

A basic case for ESP32 Super Mini boards. Lid clicks in place quite firmly. With optional pass-through for wires. Most Super Mini boards have 18x23 mm dimension, some are slightly longer. 23mm and 24mm are available here, use the OpenSCAD…

Downloads
3,458
Likes
285
Rating
4.88
P
Printablesaqab0N

ESP32 Cam Case

I got inspired by https://www.printables.com/model/286528-cam-case-for-esp-32-wifi-cam Unfortunately, the files that come with it are unusable and thus I started to design my own. The whole assembly is a tight fit to ensure a good…

Downloads
3,150
Likes
475
Rating
4.76
P
PrintablesKrazy_Kid59
18+

The source marked this model as adult content.

Downloads
3,121
Likes
212
Rating
5
P
PrintablesRauks

Minecraft Ore Lamp (WLED / ESP32 D1 Mini USB-C)

A Minecraft Ore Lamp powered by a USB-C ESP32 D1 Mini and a WS2812B LED Ring , running WLED for full RGB lighting control. Bill of Materials The lamp was designed to perfectly fit the following components: USB-C ESP32 D1 Mini from…

Downloads
3,079
Likes
1,432
Rating
4.85
P
Printablesmdkendall

Enclosure for Sunton ESP32-2432S028R Cheap Yellow Display

This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…

Downloads
3,076
Likes
222
Rating
4.77
P
PrintablesThe Stock Pot

Everything Remote - ESP32 Powered Universal Remote

🎉🎉 PARTS KITS ARE NOW AVAILABLE HERE 🎉🎉 Build your own universal smart remote! This project turns a simple ESP32 and tactile buttons into a powerful, battery-powered remote for Home Assistant — perfect for media control, lights, scenes…

Downloads
2,942
Likes
3,485
Rating
4.83
P
Printablesrowboatsect

ESP32 Case

The original had some odd open space so I closed that up. It should snap fit but if not a little piece of tape or a dab of glue will do. This is my favorite case for ESP32's that don't have anything connected to the pins.

Downloads
2,860
Likes
271
Rating
4.88
P
Printablesjeepers01

ESP32 2.8inch Touch IPS CYD LCD Screen Case

ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…

Downloads
2,823
Likes
140
Rating
4.6
P
PrintablesLaisch

ESP32 Cam housing

Housing for ESP32 Cam modul (Tinker board) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0,2 Infill: 100% Notes: After printing you can use female breadboard connectors with the plastic…

Downloads
2,509
Likes
279
Rating
4.19
P
PrintablesTecknishen

ESP-WROOM-32 ESP32 Case

Case for ESP-WROOM-32 ESP32. The lid snaps on without any screws or glue and has openings for pressing the buttons with a paperclip. The base is deep enough to keep the headers on the board, although I de-soldered mine. There is an…

Downloads
2,490
Likes
169
Rating
4.17
P
PrintablesGrunt

ESP32-WROOM-32D Dupont Case

This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…

Downloads
2,383
Likes
208
Rating
4.67
P
Printablesmaggoh

Presence Sensor Case - ESP32 C3 Super Mini + LD2410C Radar mmWave Sensor for smart home

Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…

Downloads
2,376
Likes
244
Rating
5
P
PrintablesTheProjectWheel

Case for ESP32-C3 SuperMini and LD2410C

Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…

Downloads
2,328
Likes
273
Rating
5
P
Printablesregularfry

ESP32-Devkit case

I'm using these esp32-devkit boards as ESPresense sensors: https://www.amazon.co.uk/gp/product/B08LGNV6V6 I just wanted a box I could put them in so I didn't have bare electronics around the house, and I couldn't be bothered ordering some…

Downloads
2,307
Likes
292
Rating
4.81
P
Printablesechoromeo

P320 FCU (airsoft)

100% Accurate Frame Model (for airsoft)

Downloads
2,297
Likes
82
Rating
0
P
PrintablesjohnyHV

esp32-cam OV2640 focus adjustment wrench

I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…

Downloads
2,194
Likes
99
Rating
4.69
P
PrintablesJosselin Hefti

ESP32 DEVKIT V1 BOARD 30 PIN

ESP32 DEVKIT V1 BOARD 30 PIN: STEP F3D PARAMETRIC MODEL: USB C OR MICRO USB B WITH PIN OR WITHOUT PIN

Downloads
2,143
Likes
35
Rating
0
P
PrintablesScottyDoesKnow

XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera)

WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…

Downloads
1,816
Likes
127
Rating
5
P
PrintablesFyrby Additive

Seeed Studio XIAO ESP32C3

🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…

Downloads
1,773
Likes
49
Rating
4.75
P
PrintablesMichał

ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R)

Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…

Downloads
1,773
Likes
128
Rating
4.95
P
PrintablesDevakrishnan R

ESP32 dev-module 3d model

This 3D model of the ESP32 WROOM-32 development board is slightly enlarged for better 3D print quality, capturing key details like the ESP32 module, pins, surface-mount components, USB Type-C connector, reset/boot buttons, and mounting…

Downloads
1,758
Likes
23
Rating
4
P
PrintablesZdendys

ESP32 CAM Rover with robotic arm

Modified stair climbing rover to carry a robotic arm. Mounting is in the lower frame, servos are rotated 90°, covers and frame have cutouts for the robotic arm. The ESP32 CAM with external antenna is mounted in the top cover, through…

Downloads
1,721
Likes
804
Rating
5
P
Printablesnicolas0071998

Seeed XIAO ESP32-S3 Case

Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…

Downloads
1,701
Likes
114
Rating
4
P
PrintablesFibonachio

Esp 32 Gehäuse esp32 case

Ein einfaches Schutzgehäuse für den Esp 32 mit dem Vorteil das die Pinout Belegung noch ablesbar ist.

Downloads
1,650
Likes
93
Rating
5
P
PrintablesSergey Morozov

Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case

You shoul use a 4 M3x10 screws to secure a screen to the case.

Downloads
1,630
Likes
57
Rating
5
P
Printableskachurovskiy

ESP32-S3 devkit

Model of the commonly used ESP32-S3 devkit to be used when designing cases, devices, etc.

Downloads
1,601
Likes
34
Rating
5
P
PrintablesMatt Wilde

Case for Sunton ESP32-2432S028 2.8" TFT-Touch Board

This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…

Downloads
1,577
Likes
96
Rating
5
P
Printablesnsty

Holder/case for ESP32-C3 with OLED display

I needed a small case for this particular ESP32-C3 board offered with integrated OLED display on AliExpress. I use it as a cheap, tiny display with ESPHome and Home Assistant to present small amounts of sensor data directly at the…

Downloads
1,521
Likes
120
Rating
5
P
PrintablesPaul Arden

ESP32 CAM Case With Tripod Mount

Remix of the ESP32 Cam case by mojocorp . I really like their design, however I wanted the following. Printable without supports Room for Dupont connectors Tripod mounting hole Increased rear rim thickness The shape of the original looks…

Downloads
1,518
Likes
115
Rating
4
P
PrintablesTecknishen

Seeed Studio XIAO-ESP32-S3 Case

This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…

Downloads
1,428
Likes
118
Rating
4.8
P
PrintablesAndreas Gohr

ESP32 DevKit V4 Case (OpenScad)

I couldn't find a ready made case for the type of ESP32 I had ordered, so I made my own. This fits a 38 pin version of the ESP32-Wroom-32D with built-in antenna, labelled DevKitc V4. There are two versions of the body: a thick version…

Downloads
1,416
Likes
66
Rating
5
P
Printablesbkgoodman

ESP32 Devkit V1 Case

Case with Snap-on lid. Lid has detents for buttons. Case has cutouts for USB, LEDs and pins will stick out of back of case. If you want a version of this case where the pins are fully shelled/enclosed - see:…

Downloads
1,397
Likes
112
Rating
5
P
PrintablesSeeed Studio

3D Model for Seeed Studio XIAO ESP32C6

Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…

Downloads
1,387
Likes
32
Rating
0
P
PrintablesJones

Sól: OpenDTU (ESP32 / NRF24L01+) case

I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…

Downloads
1,351
Likes
70
Rating
5
P
PrintablesSuchit Mehrotra

ESP32 DEVKITV1 ESP32 WROOM Case 2 in 1

This case can be used to store or actively use ESP32 DEVKITV1 or ESP32 WROOM The bottom holes are to push the ESP32 Board out of the socket. Also ,the top can be mesh for better heat dissipation. NOTE : For the version with buttons use…

Downloads
1,271
Likes
111
Rating
4.6
P
PrintablesAneoPsy

ESP32-Wroom Box

ESP32 Wroom Box Close with snap clips (press fit) Please be sure about the ESP32 board size: 26x52mm Different manufacturers have different board sizes. BENEFITS: Fast to print Easy to use Small & Strong Designed for FDM Printing Smooth…

Downloads
1,252
Likes
189
Rating
4.67
P
PrintablesAnin

ESP32 CAM CASE

ESP32 CAM CASE - it can be used for 3Dprinter time lapse https://www.aliexpress.com/item/1005001322358029.html?spm=a2g0o.order_list.0.0.21ef1802HnQU5g Material : any Supports : no Layers : minimum 2 for cam firmware can be used this…

Downloads
1,251
Likes
103
Rating
4.5
P

ESP32-WROOM-32U Casing

ESP32-WROOM-32U Based WiFi Repeater Utilizes the ESP32-WROOM-32U module for powerful WiFi repeating capabilities. Enhanced signal strength with an external antenna (IPEX connector) for optimal performance. Firmware based on ESP32 NAT…

Downloads
1,240
Likes
83
Rating
5
P
Printablessirprintalot

ESP32 NodeMCU Dev Kit C Case

Simplistic case for esp32 (devkit c). It has a snug fit for the esp, pin and usb breakout and lets you easy remove the esp board. The case itself is meant to be glued together. The purpose was mainly for my private projects, but I wanted…

Downloads
1,218
Likes
120
Rating
5
P
Printablescrazeeeyez

Heltec ESP32 Lora V3 Case

I took the previous model and updated it for the newer USB-C connection and made room for an antenna on the case.

Downloads
1,164
Likes
86
Rating
4.6
P
PrintablesMagnusT

Smallest possible ESP32-CAM

The ESP32-CAM enables you to build a complete webcamera and is available from under five bucks! Here's some great info from someone on youtube https://www.youtube.com/watch?v=MicAM_A0_lU There are a bunch of ESP32-CAM cases available…

Downloads
1,153
Likes
158
Rating
4.67
P
Printablesaamott

ESP32 Cheap Yellow Display (CYD) Enclosure with Pen Holder

I loved the original design, but I wanted a holder for the little touch pen that came with my USB-C CYD. Here's the result! Requires 2-4 M3x6 screws. Socket-head fit flush, but others will still work. I'll add an adjustable 2020 extrusion…

Downloads
1,148
Likes
103
Rating
5
P
PrintablesThomas V

ESP32 Case

I got myself some ESP32 to use as a bluetooth proxy in Home Assistant and needed a case for them. The ones I found online were not really what I was looking for or weren't for the board version I got. So I designed a case myself. It is a…

Downloads
1,133
Likes
91
Rating
4.67
P
PrintablesJamehz

ESP32 Project Enclosure with OLED SSD1306 0.96"

Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…

Downloads
1,112
Likes
65
Rating
5
P
PrintablesAlexander

Gridfinity ESP32 Holder

Just a simple gridfinity bin for storing ESP-WROOM-32 devboards. You can download the STL if you just want to print it easily, or the negative stamp if you want to replace the base gridfinity bin with a different version (like one without…

Downloads
1,106
Likes
217
Rating
5
P
PrintablesReitangle

ESP32 38 pin breakout board case (snap-fit lid)

Designed this case with a snap-fit lid to fit a 38 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The case has symmetrical cutouts to access the terminals on either side, so you can mount the board in…

Downloads
1,095
Likes
40
Rating
5
P
PrintablesRynok

ESP32-WROOM-32 (USB-C) Box with Lid, Trimmed

Snap-fit closure for ESP32 board, with pins available for prototyping purposes. This remix of the existing model removes the material between the pins inside the box. Printed beautifully using Inland PLA+ with a 0.5mm nozzle at a 0.28…

Downloads
1,090
Likes
91
Rating
4.8
P
Printablesunhild

Meshtastic Seeed Studio XIAO ESP32S3 & Wio SX1262 case

This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…

Downloads
1,072
Likes
146
Rating
5
P
Printablesmilans

ESP32 CAM case / enclosure / mount using modular mounting system

Fits the AZDelivery ESP32 Cam Module Board. There's a good chance other branded boards also fit. Snap fit enclosure Enclosure has holes for the ESP32 cam board pins to hold it in place Use some glue or double sided tape to attach the…

Downloads
1,053
Likes
89
Rating
5
P
PrintablesRoss Peters

Scout32 ESP32 WiFi FPV Camera Rover

Due to the large number of files, they are archived in zip format to preserve folder structure. Notes, Fixes, and things I forgot to include in this release. I forgot to include the decorative cab plating in the ScoutXL files. Please use…

Downloads
1,041
Likes
174
Rating
5
P
PrintablesGazB

ESP32-WROOM-32D Dev Board Model (Parametric - Fusion 360)

I needed this to design a case for a WLED board so thought I'd upload it for others. It's Parametric (has parameters you can change for every measurement) so you can easily tweak it for your specific board. Hide the aerial if it doesn't…

Downloads
1,033
Likes
21
Rating
5
P
Printablesmorozgrafix

Snap-fit case for Seeed Studio XIAO ESP32S3

Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…

Downloads
1,029
Likes
81
Rating
4.67
P
PrintablesAndroxilogin

ESP32-CAM with ESP32-CAM-MB Housing

So I bought a few ESP32-CAM & ESP32-CAM-MB boards with those cheapo 3MP OV2640 lenses for simple uses, such as seeing when the mailman comes. If you'd like other options than the simple example code offers from the Arduino IDE and SD card…

Downloads
1,020
Likes
66
Rating
4.5
P
Printablesscross01

Slim case for ESP32-C3 Super Mini

This is a slim case for ESP32-C3 Super Mini Development Board. Ideal case for a small Home Assistant Bluetooth proxy. This is designed specifically to fit these ESP32-C3 Super Mini boards I purchased from AliExpress based on the board…

Downloads
1,011
Likes
85
Rating
5
P
PrintablesTijmen

ESP32 CAM Mount

Small and quick to print camera mount for the ESP32 Cam. This mount uses the pins of the esp board to hold the board. The pinholes in the corners are snugger, to secure the board in place. Additionally, the 5v and gnd are left open for…

Downloads
1,003
Likes
176
Rating
4.79
P
Printablesespn8-theocho

Roomy ESP32 Enclosures

There is plenty of ESP32 board enclosures out there, but most of them are quite streamlined/minimalistic, which is fine but I set out to buid an enclosure with a little more room in it so you can easily use breadboard jumpers instead of…

Downloads
986
Likes
126
Rating
5
P
Printablesjonnybergdahl

Case for ESP32-2432S028R (AKA Cheap Yellow Display)

I needed a case for the CYD (Cheap Yellow Display) that was thin enough to use 180° USB adapters. The existing cases was too thick so I designed my own one. The case have a cutout for the RGB LED on the backside and “buttons” for the…

Downloads
981
Likes
77
Rating
5
P
PrintablesRobertoooo

Guition ESP32-S3-4848S040 EU wall mount

This is a wall mount for Guition ESP32-S3-4848S040 ESP32-S3 based touch screen, which can be purchased without the relay base. The relay base doesn't fit in a standard 60mm diameter appliance wall box, so if one doesn't really need the…

Downloads
977
Likes
53
Rating
0
P
PrintablesSMaker3D

ESP32 Cam Mount

With this small camera holder you can mount an ESP32CAM directly together with the lens and align it freely. In my case, I mounted this bracket in the housing above my 3D printer to monitor the printing. The module is very inexpensive and…

Downloads
976
Likes
170
Rating
4.89
P
Printablesrosch8

Internetradio YoRadio esp32

EDIT5: Added speaker membrane left, right boxes and panel. I divided this boxes to box and panel to print it without support and Both boxes have closed box space and on back panek hole for passive mebrane 3". it improves bass…

Downloads
973
Likes
61
Rating
4.25
P
Printablesgeokscott

ESP32 16x2 LCD LoRa Case / Enclosure

Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…

Downloads
957
Likes
51
Rating
5
P
PrintablesSeeed Studio

3D Model for Seeed Studio XIAO ESP32S3 Sense

Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…

Downloads
953
Likes
27
Rating
0
P
Printableshackerbijay

DIY holder (ESP32,ARDUINO UNO,MEGA,NANO,MINI,BREADBOARD)

DIY holder (ESP32,ARDUINO UNO,MEGA,NANO,MINI,BREADBOARD) Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: self made PLA 1.75 White Notes: nozzle 0.8, print speed 50 Category: DIY

Downloads
949
Likes
180
Rating
5
P
Printables3dloh

Case for ESP32-Camera with USB shield

This is a remix from https://www.thingiverse.com/thing:3463679 . Thanks mojocorp for the great case design. I added a GoPro type mounting as described in https://www.thingiverse.com/thing:4072374 and I extend the case to fit for a ESP32…

Downloads
941
Likes
58
Rating
5
P
PrintablesNicopetru

ESP32 Breadboard

Breadboard for esp32 Since I have the ESP32 and try to build circuits I have problems because I only have one free space left to connect to the standard breadboard. So I decided to make a version so that it's in the first column and free…

Downloads
919
Likes
135
Rating
4.83