17,242 models
A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. On May 14 2020, this RC3 version received the CE certification and it complies with…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
1h 20min per pcs Stacking versions of Prusa Protective Face Shield - RC3 A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. Provided…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Author: Prusa Research (Vlado Turek)
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5 inches) American triple hole punch (distance 4 1/4", hole radius 1/4")…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Author: Jindrich Benes (Prusa3D) https://www.prusaprinters.org/social/12/prints Josef Prusa's very own pug, Buddy. Bundled with every Original Prusa i3 MK2S & MK3. Print in black. Print instructions Print takes roughly 1 hour and 30…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
Print approx. €3.72–€4.54 excl. taxPreliminary estimate for PETGSource material: PET
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
PRUSA PRO Face shield is the final version of our face shield (successor to the Prusa Face Shield RC3). The main difference from the RC3 version is the larger visor and 2 pins on the side for a better fixation. Face shield is used as…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
WORK IN PROGRESS , this is an initial design of the cover. Currently being tested and optimized. Join us, adjust the design and upload your customized cover as a remix. An elastic cover designed to close the gap in the headband, while…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for PETGSource material: PET
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Ready for summer! Easy-to-print Frisbee Disc. The Frisbee flies very stably and well through the air. The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
As soon as my Core One arrived, it was clear that the easiest way to perform many maintenance tasks is to remove the top panel, but removing and replacing the plastic pop rivets is cumbersome. The solution used for this model is to create…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
This MINI+ spool holder was specially designed for Prusament PLA Recycled with a 2 kg spool. It ideally fits for use Prusament 2 kg spools, but it can be used for any spools thanks to adjustable spacing. You will need: 4x screw M3 x 8 mm…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of https://www.thingiverse.com/thing:526854 by https://www.thingiverse.com/mitchellharvey
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
JERRARI3D.com Modular solutions for storing steel sheets for the PRUSA i3 (MK2.5 and MK3) and Bambu Labs (X1 and P1P) Unlike my original steel sheet holder the GEN2 Steel Sheet Holder V2 does not require a backer mounted on the underside…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for PETGSource material: PET
Light bar for the Prusa MK4 available in single and dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for PETGSource material: PET
Update: Due to the interest in this model I made some aesthetic updates (to make it more readable) in addition to shaving off 0.15mm of thickness (which puts the gauge nearer to the center when the belts are adjusted properly). If you are…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Here is my take on the Prusa CORE One MMU3 —introducing the Community version ! This setup mounts the entire MMU3 unit directly on top of the printer, with an integrated buffer and spool holders. In addition to the printed parts (you'll…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
Update (July 13th, 2022) After receiving feedback about mounting the shield and the occasional break, I have decided to strengthen a few parts of the design to prevent breaking during support removal, slipping off the left mounting point,…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
Thank you steveleader for making this and available to us. I just swapped the temperature sequence, because starting with 190°C got my print get knocked off. Important: when importing the 3.mf file, copy the Before layer change G-code and…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
The DtM-v3.0 face shield PPE design has been reviewed and approved for use by the USA National Institutes of Health (NIH). See also the design on the NIH website here: https://3dprint.nih.gov/discover/3dpx-013359 Files on this post…
Print approx. €2.84–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
These thumb tabs mount underneath the heated bed. Allows easier removal of the steel sheet in the same way that the MK3 works. Print instructions Must be printed from PETG due to high temps. Part is best printed vertically on one side, no…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for PETGSource material: PET
LCD Cover for the Original Prusa Mini. Protects the screen while you don’t use the printer or covers up the light at night when you are sleeping in the same room. Print it in any material or color, just make sure it isn’t translucent.…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Light bar for the Prusa MINI. Mounts are designed to fit 11x24mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look. Mount also includes an opening to insert a…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
A sculpture of one of our long-time mascots, Josef Prusa's pug dog named Buddy. There is a single-tool version, a dual-head version (with painted eyes, toenails, and collar), and two versions for the five-head XL: one with three colors…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for one variant
Borders compatible with the Honeycomb storage wall base part of the smallest size. Only four models needed to complete! I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Can be printed with 15% gyroid infill. Material: PLA…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
If you find value in the model provided do consider supporting me with a small donation: paypal.me/Tomax77 Hope you like it ;)
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
This my take on Prusa i3 MK3S Heatbed Cable Cover. I remixed the angled version so my printer fits better to the Ikea Lack table enclosure. Print instructions Unassociated tags: heatbed cable cover, prusa heatbed cover Category: 3D…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…
Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
Print approx. €14.42–€17.62 excl. taxPreliminary estimate for one variant
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
This SVG file goes with mcpea's 3D model of the printer made for PrusaSlicer, which although excellent was missing a proper build plate texture. More exactly, this file replaces the black build plate texture with the big white FLSUN logo…
Print approx. €3.29–€4.03 excl. taxPreliminary estimate for one variant
Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
MODEL DETAILS For use with ‘Revo Connect’ nozzle holders . A bracket for your Prusa MK3. Should also work with MK2 printers. Slots into the top of your frame, with the E3D logo facing forwards to avoid Z-axis collisions. RECOMMENDED PRINT…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
This is a simple mod for your MK3 to use it as a penplotter. The main design objective was for it not to interfere with printing and to not have to assemble or disassemble any parts to change from one to the other. I tested multiple…
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+/Gen2 You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa…
Print approx. €8.13–€9.94 excl. taxPreliminary estimate for PETGSource material: PET
Simple filament guide for MK2/S + MK3/S printers. Main design considerations V2 (Green) provide enough gap for filament movement as Z rises higher arm in respect of spool to aid filament path / extruder reduced thickness of arm V1 (Blue)…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Complete rework of my original Prusa MK4 / XL xLCD Knob Beauty Ring to work with the new injection molded parts from the MK4S, XL from 09/2024 onward, CORE One and CORE One L. Printed in Prusament PETG Prusa Orange 0.1 IS Fast Detail
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
PRUSA color scheme print of the Predator Action Pliers Mk2. Print instructions Prints in place with no supports.
Print approx. €6.15–€7.52 excl. taxPreliminary estimate for one variant
This is a remix of Agustin Flowalistik's Chainmail: https://www.prusaprinters.org/prints/286-chainmail-3d-printable-fabric It uses 9 of his sample sized models in order to fill the bed of the Prusa Mini. Print instructions This print came…
Print approx. €6.04–€7.38 excl. taxPreliminary estimate for one variant
I didn't like the weight of the spool on top of my printer any more So I designed an adaptor to use the original spool holder that came with my MK3, which adapts it to mount on the side of the printer. An easy print part, I printed mine…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
This a guide for your Ptfe tubes on the top of Prusa enclosure. I make it for my (un)original prusa drybox systeme. 5 Spool rewinder adapter for MMU2S / MMU3 in (un)original Prusa drybox :…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
USB holder for Prusa Mini Print instructions USB holder for Prusa Mini ..my remix from https://www.prusaprinters.org/cs/prints/15544 needed M4, T-nut, USB 3 cable angle Bend Up, 25-30cm, ex.…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
These are larger versions of the cable passthrough tube used for mounting the power supply and/or LCD controller outside of the Prusa LACK Enclosure V2. _lack_cable passthrough provides enough room for the power cables as well as a USB…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
*Note The first file uploaded was missing one set of bearing holders, so the corrected file was re-uploaded. In consideration of cases where M3 cap bolts are difficult to obtain, we have prepared a derivative version that does not require…
Print approx. €7.64–€9.33 excl. taxPreliminary estimate for PETGSource material: PET
Remixed "MINI-knob" (Prusa Mini) and "LCD-knob" (Prusa MK2 / MK3) by PRUSA RESEARCH https://github.com/prusa3d/Original-Prusa-MINI and https://github.com/prusa3d/Original-Prusa-i3 This knob features a smaller form factor, knurled sides…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
I have been doing some organisation of my work space, such as Gridfinity , and I had an extra Prusa build plate lying around (literally). So I designed this Prusa build plate holder, so that it would not be in the way and getting…
Print approx. €4.56–€5.58 excl. taxPreliminary estimate for PETGSource material: PET
Introduction This module is part of the Storage Tree project . there’s no need for an MMU on this project. Only one material change. But there is a MMU3 prepared files if you have it In case you've come across this model and are unsure of…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
MODEL DETAILS Edition 2, which uses the original Prusa Mini fan can be found here . If using this version (Edition 1), please read this upgrade guide before printing the parts: Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
During the assembly of MMU2S I cracked the part. I suddenly discovered that many people are having my problem so I updated the Prusa part to get it stronger. This design is based on R1 prusa part. Print instructions I have printed it with…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET
A simple bracket holding the case for a Raspberry Pi 3 B+ and SenseHat boards.... serving Octoprint etc. 2 M3 cap screws required. Print instructions ABS no supports.
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant
All design credit goes to ZekeAsakura https://www.thingiverse.com/thing:2900552 I remixed it as follows: Reduced the diameter to +/- 40mm Trimmed the height to +/- 10mm Recessed a small hole to make it easier to glue in a 8mmx3mm magnet…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…
Print approx. €7.55–€9.23 excl. taxPreliminary estimate for one variant
All I did is take what Prusa provided on Printables, and made it longer, that's all. I've found that I lacked places to hold 2kg spools while working. Now I don't. If someone else find this useful, happy printing! Don't throw short…
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for PETGSource material: PET
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Double-sided Prusa keychain to be printed with automatic color change at a given layer height or just in a single color. It's a fun and easy print that can be used to showcase the capabilities of the Multi-Material MMU3 or simply to show…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Follow the official blog post: https://www.prusaprinters.org/?p=8875&preview=true You can easily turn the paper centers into a handy container for accessories, pens, jewelry or even a money box! 3D printing is easy and quick, as well as…
Print approx. €1.84–€2.24 excl. taxPreliminary estimate for one variant
I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt. The only weak point now is the stock belt holder on y carriage. To have a…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow Prusa Mini version This is only a remix of the original made to be printed on Prusa Mini Original by Łukasz Janikowski Print instructions Made for prusa mini printer. Print without…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Small 10-slot SD Card Caddy that pops into the hex hole of the z axis support parts. Files were sliced in PrusaSlicer 2.1.0 with 3 perimeters and modified infill. All other settings stock Prusament PETG on Original Prusa MK3 Print…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
update: This model has updated to v2 having now stress relief for power and ethernet cable. --- Stress relief for Prusa Mini power and ethernet cable. I felt like the power plug moved too much and possibly caused stress for the power…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Improved MMU2 selector with rectangular slot for magnet found in Prusa MK3S/MMU2S kit parts. This is a modification of the E2 version of MMU2 selector mod by emanuvele, inspired by same modification of the previsous V9 version done by…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the MMU2 thumbscrews for the MMU2 S . The longer thumbscrew should avoid accidentially pushing buttons on the MMU2S. If you already printed the short/original, you just have to replace the left thumbscrew, because there…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
My take on a handle for the Prusa mini. Printed from PET or PLA works also. 0.2mm layer heights 4 shells 8 top and bottom layers 30% infill No support needed Requires 2x m6x12mm cap screws and 2x 3030 extrusion T nuts for install. Links…
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
Its that time of the year, lots of birds around my home & work so I created this bird feeder that utilizes the PRUSAMENT spool half as a perch for the birds. The threads are PCO1881 specification, so it should fit most soda bottle types.…
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
XLCD display from Mk4 in color (MMU)
Print approx. €0.04–€0.04 excl. taxPreliminary estimate for PETGSource material: PET
Just download the G code and print!
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for PETGSource material: PET
A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…
Print approx. €7.20–€8.80 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print feet to help stop the printer transferring resonance vibration to the work table. If your new printer turned your table into a drum, you want these. Cheaper, easier, lighter, and better looking than a slab of cement. No need…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
READ THIS TO BETTER UNDERSTAND THIS MOD BEFORE PRINTING This mod needs you to flip the IR sensor connector so be ready to swap cables as described below. You can damage the sensor if you will not follow these instructions. Updates at the…
Print approx. €4.97–€6.08 excl. taxPreliminary estimate for PETGSource material: PET
This is a slightly modified version of the MK3s heatbed bottom cover. I added a rear support for the cables with a channel for a zip-tie. This does add an additional 9mm to the length of the part, so tight enclosure/wall spaces should be…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Hi PP i am posting here my project, i am willing to modify one of my prusa mini to direct drive extruder and more sturdy frame like Bear. If you want the Haribo version check it here:…
Print approx. €17.16–€20.97 excl. taxPreliminary estimate for PETGSource material: PET
EDIT: Díky četným žádostem jsem vytvořil i variantu se zámky, která na stepperu drží pevněji. Víčko chrání otvor Z stepperu tiskárny Prusa MINI před vnikáním prachu a nečistot. Původní verze sedí na místě volně, aby se dala snadno…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
My MK4 is on a sideboard and stands over the edge. As a result, you can not see the great new LED status bar of the MK4. This model solves the problem my MK4 and also fits in any Prusa XL/MK3.5/MK3.9. It is a small light pipe and fits…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Remix of the model from grooveup - I just needed 3 slots to hold my build plates.
Print approx. €2.68–€3.27 excl. taxPreliminary estimate for PETGSource material: PET
Use this print to plug the corners up Needs 6x2mm magnets. I used 3 per print since I was short and that seemed okay It's certainly not perfect as there's a minor gap still but this is just a really quick cut to match the webcam mount
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
![[Screwless] Spool holder for Prusa MINI](https://media.printables.com/media/prints/145176/images/1372044_b3311120-21ed-43c6-acb3-b6fc0a978df6/cg.jpg)
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
