14,220 models
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Print approx. €1.17–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
tl;dr If you want to switch between E3D nozzles on your CORE One, you should use this tool instead of the original. Because for E3D nozzles the heater block needs to be installed higher, the original nozzle replacement tool is…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…
Print approx. €5.59–€6.83 excl. taxPreliminary estimate for one variant
My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
Print approx. €7.37–€9.00 excl. taxPreliminary estimate for one variant
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
We purchased a secondhand Hi Ho! Cherry-O game... and the spinner was missing! This is the first model I have ever created– I used Fusion 360 and PrusaSlicer. Parts can be superglued together or pressure-fit– I recommend first gluing the…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Spare part for Shelly TRV. This part can be used in place of the original part, which can break if there is a collision with the TRV.
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
This is a replacement coupling hook&spring for Playmobil wagons. Printed in ABS the spring is stiffer than the original Playmobil piece, but that also means the wagons are less likely to accidently uncouple. The uncouple-lever was left…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Replacement for backside part of VW Multivan T4 cup holder
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for PETGSource material: PET
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
It would be nice if you post your make. Thank you
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
I am currently using this side mounted spool holder for my Qidi X-Max-3, but I wanted to take advantage of Vlad's non enclosed spool holder replacement but with an upgrade so that it uses bearings to allow the spool to rotate smoother. I…
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for PETGSource material: PET
Included two models: one with stop code for captured magnet (5 x 2.5 mm), the other is a press fit.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
These little pegs are always getting lost or sucked up into the vacuum cleaner! I made a replacement peg as close as possible to the existing design. Just choose your color (white & black are standard) and print as many as you need.…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Removing the rail from the packout is a chore. That little tab breaks off and you end up massacring the case. Now you can replace all the end caps with a much easier to remove system that allows you to add accessories to the rails of your…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
This is replacement for plastic nut ( SOAP-NUT-GR ) of a kitchen soap dispenser ( SOAP-JAD-CPB ). The original part cracked and it is hard to buy the part outside of Poland. Printed part is probably compatible also with other McALPINE…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
1/4" quick release replacement plate/adapter for the Manfrotto compact action tripod
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Printed in ABS with 100% infill
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement nut used to clamp the shade in place on my lamp's light socket. The factory's original part broke due to heat fatigue. I printed this model on my Prusa MK3S+ using polymaker's "Galaxy Black" 1.75mm PolyLite™ PLA…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
An ergonomic replacement handle for the IKEA Torkis laundry basket. To quote my parents; the laundry baskets themselves are great, but the handles break too easy. So I designed an ergonomic replacement “upgrade” that works both with…
Print approx. €5.06–€6.19 excl. taxPreliminary estimate for one variant
Introducing a robust 3D-printed cover for the Clemsa Mutan Mini remote! After breaking twice, this durable design offers a long-lasting solution. Perfect fit, easy to print, and adds a layer of protection to your remote. Ideal for…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
I made this in Fusion 360 to fix the broken button on my Air Canada carry-on, and avoid having to buy a new one. Printed in PETG on Prusa mini, using supports underneath to print “upright” as it would be installed. I recommend printing…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…
Print approx. €10.50–€12.83 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
I created this model because I took the seat out of a 06 Eclipse from a junkyard to put on my sim rig, and the seat back panel was being held on by a couple pieces of strings. When I took it off, I found that every hook(there's 5) that…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
This Thing is a Renault Modus trunk shelf clip. It's very hard to find this one in car parts shops, without this trunk shelf is very unstable and may fall while driving. Tried to find this clip on scrapyard with no luck. This clip may…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
Did your delicate porcelain sugar spoon snap in half because of your disgustingly strong hands? Worry not for now you can print a replacement which is much more durable!
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Background As the uploaded pictures show, the knob on my OLFA model L-1 utility knife broke. Rather than throw the knife out, I opted to create a replacement part myself. This part is more interesting than it looks, it's doesn't just set…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
This design reproduces the tire rim and rim keeper for the Playmobil Safari set Jeep. This play set was released in the late 1980s I think. If your kids have the jeep and a missing or broken wheel, this may do the trick for getting your…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
PARKSIDE 150mm Clamp Jaw Replacement To make this part stronger I printed this with 4 perimeters, 5 top and bottom solid layers and 60% of infill. Picture shows how it should be placed on the bed of printer. Material: PET-G, ABS, ASA etc.…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
!!! THIS WAS DESIGNED FOR RAZER BLACKSHARK V2 ONLY (almost) !!! Based on what I found online the V2 PRO (old model before 2023) should have the same earpad frame as the normal V2, while the V2 X and V2 PRO 2023 edition have another kind…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for PETGSource material: PET
Customizable backpack replacement part, can be personalized with your name using Fusion, easy to print. Note: Make sure the selection filter is set to ‘All’ 20% infill or more PLA or ABS.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
This stake has a 18mm diameter cylinder to allow outdoor lighting to fit over the top. There is a slot in the cylinder where a low power wire can pass through. This model was printed using supports from build plate only. The notch should…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
Print this with the face laying on the bed. I recommend .15 or thinner layers to get enough material down. This is an application where a LESS stiff material like PETG is probably better than PLA. I have had good luck with all sorts of…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Resizing of the Ball may be Needed to ensure clearence. The Example gcode resizes the ball to 7.3mm diameter and splits it in to two halves. There is a Square Connector, no glue needed. The Example Gcode disables Elephant foot…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
I designed these for my mom after she lost one of her original ones. I used a ballistic chronograph to compare to the originals and was unable to see any difference in performance. Printing notes: The casing is printed in PETG, and the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
It's a replacement barrier for the Lillabo (IKEA) wooden train level crossing. The original (red) barriers break quite easily. These aren't much sturdier (it has two pins either side, one of them has a small diameter, so can't really…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
These are building blocks to replace any missing blocks (or to recreate the entire set!) from the Grimm's Stepped Pyramid Puzzle Block set. I bought a used “stepped pyramid” set that we found at our local thrift store that was missing one…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Its function is to allow the camera to be used without the need for the normal battery. Instead, the replacement can be used while the camera is connected to a power bank or charger. This functionality is especially useful for creating…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
These plugs are designed to fill the screw holes of an RSL brand glass entry door. Many glass doors have screw holes for securing the inner and outer trim/frame around the glass pane. Here's the website for the door frame:…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
My Lid for the DeLonghi Dedica (EC 685) is broken, so I printed a new one :D Printed with 0,2mm Layer and 150mm/s speed on my Sovol SV07. No Supports needed.
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
This is a replacement element for Snapline (Hobbycreek) modular hoses used on the arms of their helping hands. Once, I broke one element by twisting the arm too much so maybe you did it too or will ;p Version Description Date A.1 Initial…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
This is an easy to print drop-in replacement for a Schluter-KERDI-LINE Strainer (hair catcher), model KLVZSF. Design notes The shape is different from the original, but designed to fit into the drain outlet. The tabs are designed to…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
“Imitation is the sincerest form of flattery” once Oscar Wilde said. I loved Andy's hanger replacement clip (linked below), but wanted to reuse my old metal hook. Instructions Take the broken part and remove the metal hook Print the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Replacement for a broken hook for hanging the "Nilfisk Multi 20T" vacuum cleaner hose (maybe usable also for other types, but I haven't verified it). Náhrada za ulomený háček pro zavěšení hadice vysavače "Nilfisk Multi 20T" (možná bude…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for PETGSource material: PET
You could buy a genuine OEM replacement knob for $5 plus shipping and handling and wait for a week for it to be delivered. Or you could print one right now for a couple of cents. That expensive 3D printer is going to pay for itself in no…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
INFO The model is based on this holder: Usually the holder is sold with the bidet as a set, but I only want the holder. So, I decided to print a replacement to lower the cost and to challenge myself with 3D modeling and gain more…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for PETGSource material: PET
Reflectors are a safety feature. Consider replacing them with a genuine part. Use this model at your own risk. Dimensions match the original part mostly. The clip is the weakest point in this print therefore it's made as a separate piece.…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands that utilize a 15mm strap as well. It is printable without supports when printed vertically on its “legs” (the STL should be in…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Replacement for pedal top of a sewing machine. (Necchi 559). After the pedal fell off a table, the top part was broken. I designed a replacement part so the safe operation of the pedal was possible again. Material: PETG or PC (The used…
Print approx. €8.62–€10.54 excl. taxPreliminary estimate for PETGSource material: PET
The ~26 year old ABS part MB424629 snapped, so i measured up the framents and came out with this. I printed mine on my i3 MK3S+ out of Prusament PETG with a 0.4 mm Nozzle and 0.1 mm layers i think, but i by no means optimised this. you…
Print approx. €3.96–€4.85 excl. taxPreliminary estimate for PETGSource material: PET
Design is at the end of video
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
I have the ikea Latt table and chairs set for my kids and i broke the seat when sitting on it (i guess I am too heavy for it when the seat was wet from a spill). I was unable to find a replacement seat for the chair from Ikea so I decided…
Print approx. €13.62–€16.64 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement part for the tentioning part of the popular D'Addario guitar tuner. I Hope to help all you guitarists and bassists out there who have a broken tuner lying around. I did lots of tests with different materials, nozzles…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
The feet on my box fan broke. So I took some photos, imported them into Fusion 360, took a bunch of measurements with a micrometer and boom. Replacement Feet on Demand. After I printed the first one I realized it was a little loose so I…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
After having this OEM replacement handle break after a year, I looked to see if I could 3d print one for less. Found the original model on Thingiverse and gave it a shot. The original had sharp edges that didn't feel great on your bare…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
Printing | Recommend PETG or ABS, print hot, lots of perimeters and solid. Press onto the shaft and go. No supports required. I made these almost 4 years ago and they've survived several epic trips since. Hope you find them useful!…
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
These are durable name tags. Tested in all day conditions. Print settings: - Material: PLA - Nozzle: 0.4mm - Layer: 0.2mm - Profile: 0.2mm structural - Supports: no Made with passion by Xargas! Like what you see? You can support my work…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Our kids love their Dyson toy vacuum. So it gets used quite often and from time to time looses its buttons. Most of the time we find them and put them back in, but lastly one got lost, so I made this replacement which fits very nice and…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
EN: Had a lid with a diameter of approx. 23.5 cm where the existing knob broke off. The hole for the screw measured 4.7 mm. I wanted the stem of the knob to also fit through the hole in the jar as a centering device and I also needed a…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
ASA, 4 perimeters, 20prc infill, 6 full bottom/top layers, with supports.
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
My toilet lever broke and I didn't want to buy a new one. This model is certainly not overengineered and the tolerances are pretty tight in most places but if you'd rather print one than order one for whatever reason (or just need a…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
This model includes replacement buttons that you can glue in your damaged Smart key fob. You can get replacement plastic cases relatively cheap on eBay but then what would we use our 3D printers for ;) It is parametric and can be adjusted…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for PETGSource material: PET
Update : I made a reinforced version, which is much more durable and strong. I advise you to use it instead of the standard version. There is no need for supports! ^w^ On my Quickie Neon wheelchair, I've ended up losing my 2 brakes,…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
In my travel version of Rummy (small), some of the stand supports broke and could not be used any more. I have designed a 3D printable spare part as 1:1 replacement. From first testing, it even has a better fit than the original stand ;-)…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Ersatz für eine alten Ablauf. Einfach zu ersetzen. Kann von Personen betreten werde. Auto oder sehr viel schwereren Gegenständen nicht getestet. Gedruckt in PETG, mit 3 Außenkonturen und 15% Gyros Infill. Außenmaße: 138mm x 138mm x 14mm…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for PETGSource material: PET
Love Letter Favor Token — 3D-Printed Replacement (Single-Color) A clean, durable single-color replacement for the Love Letter favor/affection token. Prints fast, stacks neatly, and upgrades table presence without needing color swaps or…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
For anybody that works in manufacturing, you are probably familiar with e-stops and the button breaking long before the e-stop has an issue. Here is a replacement button for a 22mm e-stop. I made it to have the white arrows and that will…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement gear for a smart blind automation motor. I bought several of these motors and after 5yr the plastic gear inside each has started to disintegrate and crumble. The stacked gears in the motor are mostly metal except for…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Motivation The first thing you usually lose from a watches (leather) wristband are the retaining straps. This requires replacement of the wristband even though the rest of the wristband is still in fairly good condition. This simple print…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This is a TPU version of my first model to replace a suitcase wheel. https://www.printables.com/model/212611-suitcase-replacement-spare-wheels-fusion360-file-i Features The structural parts can be printed in any hard and durable material…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement for your Ekster Cardholder backplate. It is 0.5mm thicker than the original aluminium backplate to give it some stability. Note that this will not block RFID, this can be great if you store an access card and don't…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
Everyone who has flown one of these models long enough has experienced a cracked cowling. This is a printable replacement part for Guillow's 504 Supermarine Spitfire balsa model airplane. A tiny bit of infill with single walls compares…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
The original motor mount for Volantex aircraft is crap, as any collision motor first cuts it clean off the rest of the fuselage. This motor mount replaces the entire nose section, providing strong support of the motor and better cooling.…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
This is the replacement coupler for the Wilton Dessert Decorator Plus. The original breaks pretty quickly. There are no replacement parts that can be purchased so I created one. It works well but needs to be printed in very high quality…
Print approx. €1.90–€2.33 excl. taxPreliminary estimate for one variant
Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
It snaps in like the original one and you can use every 90mm fan. i tested it with the Noctua NF-B9 PWM and it‘s 1-2°C cooler and super quiet. (Open frame consition) You sould use at least PETG. happy Printig
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
Replacement part for the Garantia composter (Garantia Komposter Thermo-Wood 600) sold by OBI.
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
This model is free. If you appreciate this model, please leave a download and a like. If you print this model, please post a make! Pictured on the left, the printed part. On the right you can see the original part. This replacement leg or…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Hello, Here are some easy to print replacement handles for some cheap staple remover. Print them out of PETG (PLA is also fine, but not as durable), at your preferred layer height with 4 perimeters. Print 1x Up and 1x Down. Once printed,…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Replacement of the plastic insert into rail holding the basket. That prevents the basket-holding rail from leaving the guiding wheels. It gets easily broken over time and is almost impossible to get hold of replacement. Recommend printing…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
