Search results: rigi

Sort order

3,598 models

The Original Dragon Egg - New & Improved for 2025

For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…

Downloads
67,969
Likes
11,893
Rating
4.93
P
PrintablesPrusa Research

Transport handle for Original Prusa Enclosure

Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces. Check the guide on how to install the Transport handles . To mount both…

Downloads
17,782
Likes
1,100
Rating
4.91
P
PrintablesMerganMcFergan

Gizo the Spider (Original)

Gizo is a cute little spider looking to stir up mischief. This adorable trickster has print in place leg hinges and doesn’t require support. Best of all, it’s a great use for that glow in the dark filament roll that everyone has on the…

Downloads
13,076
Likes
4,493
Rating
4.94

"The Original" Octopus Chip Clip

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop No supports, scale up any size. Seems to work on all size & types of bags. So simple and effective it may surprise you. Want MORE? Visit the CHIP CLIP COLLECTION

Downloads
9,467
Likes
2,482
Rating
4.89
P
PrintablesLumanieri

The Original R.E.P Ratchet Wrench - 1/4" Hex Bit Ratchet Wrench Tool and FIDGET TOY!!!

Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…

Downloads
8,519
Likes
2,173
Rating
4.83
P
PrintablesPrusa Research

Spool holder for Original Prusa MK3S+

Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.

Downloads
7,255
Likes
390
Rating
4.91
P
Printables3D-Druckfactory

Sheet holder for original Prusa Enclosure with Tool Holder

Printable Sheet Holder for your Origginal Prusa Enclosure for 2 or 3 Sheets with one Tool Holder (allen key). Update 01.12.2022: Added a slot to insert a square nut. Square nuts come from spare parts. STL files with the _nut extension.…

Downloads
1,965
Likes
412
Rating
4.94
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5/S, MK3.9/S & MK4/S - MMU Not Required)

Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…

Downloads
1,941
Likes
781
Rating
4.97
P

Honeycomb wall organizer (not compatible with the original)

This project is inspired by “Honeycomb storage wall” project by RostaP, but NOT COMPATIBLE with it. My honeycomb plate has different dimensions and its walls are thicker and more solid. This project is not finished. New components can…

Downloads
1,657
Likes
344
Rating
4.25
P
PrintablesMike
18+

The source marked this model as adult content.

Downloads
1,294
Likes
102
Rating
5
P
PrintablesMakers Mashup

Original Ultimate Nozzle Brush

Check out the new and improved version called the Maker Multitool! https://www.printables.com/model/446837-maker-multitool-the-ultimate-3d-printing-nozzle-br 3D Printer owners know that from time to time a print goes bad and filament…

Downloads
1,258
Likes
354
Rating
4.86
P
PrintablesGiantBrain

Cablemanagement Original Prusa Enclosure

I like it tidy, so I designed a cover for the loose cables that are needed for the extensions of the LED strip and the filter system, which can be simply pushed or clipped on by means of a holder. I think this is a neat thing and it also…

Downloads
1,146
Likes
416
Rating
4.89
P
Printablesicefox

Nintendo Switch Grip (Original, OLED)

Scale x (and only x) following the instruction below: For the original (non-OLED) model: scale x to 99.3% for a loose fit, 99.15% for an exact fit, and 99% for a tight fit For the OLED model: scale x to 100.65% for a loose fit, 100.5% for…

Downloads
1,118
Likes
165
Rating
5
P
Printablescedarrapidsboy

Rigid Case for the Galaxy Tab S6 Lite

A half-shell case for the Galaxy Tab S6 Lite. Covers the back, sides, and corners. Also provides a bezel to protect screen when device is face-down on a surface. Hard shell design: Fills-up the MK3S build space (1-2mm to spare) Prints…

Downloads
1,038
Likes
60
Rating
5
P
PrintablesMichal Fanta

Filament buffer for Original Prusa i3 Multi Material upgrade

This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…

Downloads
813
Likes
137
Rating
4
P
PrintablesBigBrain3D

The original Retractable Purge Mechanism, for MultiColor 3D printing, Replaces purge blocks & wipe towers

Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…

Downloads
778
Likes
172
Rating
4.6
P
PrintablesFAYRON

Original Prusa Enclosure 2Kg Spool Holder

A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…

Downloads
752
Likes
43
Rating
4.25
P
PrintablesAsa

PTFE Passthrough for Original Prusa Enclosure MMU2 MMU3

Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…

Downloads
668
Likes
164
Rating
4.42
P
PrintablesMichaelQ

Original Prusa Enclosure - Slider Lock Latch

When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…

Downloads
656
Likes
228
Rating
4.98
P
PrintablesGrzegorz

Original Bambu Lab auxiliary fan holder for P1P

Print with PLA Support and Brim not necessary (if then use tree support) 15% Infill (for better material stability use gyroid infill) To look better use the Arachne wall generator Thanks for downloading in advance and please don't forget…

Downloads
611
Likes
47
Rating
4.78
P

Rigid Bit Holder LTT Screwdriver (60 bits, parametric)

This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…

Downloads
559
Likes
69
Rating
5
P
Printablesfoorschtbar

Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…

Downloads
555
Likes
111
Rating
4.89
P
Printableshibble

Rigid cable floor trunking

Needed some non-trip cable floor covers. Most coiled rubber covers do not lay flat, and silicone is too soft to protect cables from heavy downwards pressure e.g. electric wheelchairs. ‘Prusament Galaxy Black’ works well to hide dirt from…

Downloads
446
Likes
61
Rating
5
P
PrintablesVisualReversal

MK3 Original Prusa Enclosure (OPE) Mesh Side Boxes (No MMU Needed) - Deprecated

UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…

Downloads
418
Likes
102
Rating
5
P
Printableskaje

AA to C battery adapter - Type 3 with rigid shell

Some time ago I published an adapter (see remix list) for using AA cells in place of C cells. That adapter works quite well in most cases, but I recently had an application that required a more ridgid shell. This new version takes longer…

Downloads
410
Likes
36
Rating
4.78
P
PrintablesDaHouzKat

Original Prusa Enclosure Folding Door

Features Easy to print and install Only 1 plate to print (5 small parts) Reuse the existing hardware (bolts and nuts) Folds completely to the side of the printer when used with the optional 270° Hinge for Original Prusa Enclosure What you…

Downloads
391
Likes
183
Rating
4.94
P
PrintablesKevin248

Original Prusa XL Skeletton Dwarf Cover Back

Ich habe das Originale Dwarf Cover Back etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser. Ich habe durch den leichten Gewichtsverlust keine negativen Veränderungen am…

Downloads
391
Likes
80
Rating
5
P
PrintablesGigiGipo

Valentine Rose Earrings - Object scaled from the original (you can see it from the dimensions)

Rose and love earrings Object scaled from the original (you can see it from the dimensions) Dimensions: 50x16,16x2mm

Downloads
378
Likes
93
Rating
3.33
P
PrintablesKevin248

Original Prusa XL Skeletton Dwarf Board Door

Ich habe das Originale Dwarf Board Door etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser, sodass man hineinsehen kann. Ich habe durch den leichten Gewichtsverlust…

Downloads
362
Likes
80
Rating
5
P
PrintablesCharlieLJ18

Original Twist Copter

Aerodynamic twist copter. Powered by friction. You'll have lots of fun with this flying toy. How to fly the Twist Copter Hold the Twist Copter with the stick sandwiched between you hands and the propeller facing up. Now, rub your hands…

Downloads
353
Likes
78
Rating
5
P
PrintablesAtelier CK

Pixel 9a phone case for PLA/rigid filament

Minimal, snap-on case for Pixel 9a designed for rigid PLA. Combines a 25% gyroid infill with 4 perimeters for flexibility and strength. Snaps on easily, stays on well, removes and reattaches without damage to phone or case. Prints in 1…

Downloads
323
Likes
19
Rating
4.2
P

Violin (Original Prusa i3 MK3S+)

Sada houslí - kolíčky, kobylka, koncovka, podbradník pro Original Prusa i3 MK3S+

Downloads
300
Likes
101
Rating
1
P
PrintablesxLrc

6" Air Conditioning Flexible Hose Adapter to 5" Rigid Ducting

This part allows a portable AC unit to be connected to a 5" rigid ducting pipe for external venting. My case was through a conservatory wall (UK) during a heatwave. Threaded side screws onto a 6" Portable AC Hose and the other side is…

Downloads
284
Likes
18
Rating
0
P
Printablestechis

Original Prusa Enclosure RepBox 2.5 Stand

This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…

Downloads
266
Likes
107
Rating
4.77
P
PrintablesMike81622

Original Prusa Enclosure Spool Holder Distance Ring

When you want to utilize the full build volume of your MK4S inside the Original Prusa Enclosure using the original spool holder, there's a high likelihood your tool head will crash with the filament spool at some point. I made this…

Downloads
255
Likes
61
Rating
5
P
PrintablesUM3D

Prusa MK4 bin left for original Prusa enclosure

printed with: Prusament PLA Galaxy Black support necessary

Downloads
251
Likes
36
Rating
5
P
PrintablesUko

Prusa Original Triwing LCD Knob With Concave Top

Do you like the original Prusa design, but the last know of theirs just won't cut it with the flan top surface? Here is the same thing but with a hollow as in the previous design. Does this print well? Not so much: you need support…

Downloads
249
Likes
24
Rating
5
P
Printablesdtoux

Dust port adapter for Kreg track saw to Rigid 1-7/8 vac

I designed this adapter for my Kreg track saw for hooking it up to the Rigid 1-7/8 shop vac. I found a much better solution after that from Rockler but maybe this print will be useful to someone else. It fits the original twist lock…

Downloads
242
Likes
32
Rating
5
P
PrintablesBob the Builder

LEGO Brick 4 shelf (5x original size)

The Lego brick shelf for kids room decoration is honestly just a copied version of Lego's original set of 4114 shelves (that is 10x scale). I made this to be able to print it and let you decor your kid's room for less price than buying…

Downloads
240
Likes
50
Rating
5
P
Printablescandrist

Trianglelab Dragon Hotend v2.0 Bear MK3S Extruder Cover Rigid Mount

I used the Triangle Labs Dragon Hotend v2.0. The hotend comes with m2.5x8 (4x) and m2.5x5 (2x) I use the m2.5x5 on the front and the m2.5x8 in the back. This is because the threads do not go all the way through the hotend so you need them…

Downloads
239
Likes
37
Rating
5

Large Bin System for Original Enclosure & MK4 (Remix)

Description This is a remix of an excellent set of bin boxes for MK4 + Original Enclosure by @maximweb_1466211. See original model description for more details:…

Downloads
226
Likes
64
Rating
4.8
P
PrintablesPeter Farell

Brigid

Brigid the Celtic goddess of poetry Brigid, a prominent figure in Celtic mythology, is revered as the goddess of poetry, among other domains. Her name, meaning "exalted one," reflects her high status. Often depicted as a triple goddess,…

Downloads
221
Likes
54
Rating
0
P
Printablesmikedmor

Original Prusa Enclosure Mesh Side Boxes for MK4

The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…

Downloads
213
Likes
41
Rating
5
P
PrintablesDavid D

Original Prusa Enclosure - Slider Lock Latch - Optimised for printing

Optimised version of the Slider Lock Latch by @MichaelQ - at least for me. The original version did not print well for me, probably cause I am using a slightly bigger nozzle, probably cause of other reasons. Anyways I also wanted to get…

Downloads
177
Likes
36
Rating
4.62
P
Printablessteve457

Rigid Blower Stubby Nozzle

This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…

Downloads
175
Likes
16
Rating
5
P
PrintablesZohan#4775

MK4 2 kg / 1 kg Filament spool holder modular for original suitable for a lot of Spool sizes, 3 x 1kg or 2kg + 1kg no Problem

*** 28.02.2024 UPDATE *** Long Filament Guide V2.1 *** 26.02.2024 Publication on Printables *** Recommendation PETG or better. You will need an M 3 x 10 mm screw with nut to fix the filament guide to the main holder. With 1 extension you…

Downloads
168
Likes
28
Rating
5
P
PrintablesTheunicyclist

Rigid vacuum adapter

This is a part to make a connection between a Rigid shop vacuum and a 50mm ID hose. Specifically the size of antistatic hose that came with the Oneida Dust Deputy.

Downloads
153
Likes
32
Rating
0
P
Printablesmaximweb

Metal Print Sheet Holder for Original Enclosure

A holder for up tho three MK4 metal print sheets, attachable to the Original Enclosure. Features The slots for the sheets are offset not only vertically (as in many other designs out on Printables), but also horizontally. This facilitates…

Downloads
153
Likes
37
Rating
5
P
PrintablesDesertStorm

Zip tie mount for Original Prusa Enclosure - External

I had a need to run and secure a power cable on the outside of my Original Prusa Enclosure. I designed this zip tie mount for that purpose. It has an inset for an M3 nut. I used a M3 x 4mm socket cap screw to attach to enclosure. Print…

Downloads
147
Likes
39
Rating
5
P
PrintablesDaHouzKat

Original Prusa Enclosure BTT PI TFT43 DIP Case

Compatibility BTT PI TFT43 DIP Raspberry Pi 4 Print Instructions Use Default Prusa Slicer 0.20mm Quality Print Settings Nozzle Diameter : 0.40mm Filament : PLA or PETG Infill : Gyroid 25% Perimeters : 3 Supports Support on build plate…

Downloads
147
Likes
42
Rating
0
P
PrintablesPuka

(Un)Original DryBox bottom seal with PTFE passtrough

I wanted to have a passtrough for the DryBox and add a nut holder for the middle screws. I used Passthrough_Cover.stl for the hole dimensions to get the fit just right. From the other files I got the dimensions for positions of holes and…

Downloads
141
Likes
18
Rating
5
P
PrintablesWeekdayWeekend

Ice Scooper Holder for Frigidaire EFIC117 Ice Maker

WHAT IS IT? This is a scoop holder for the Frigidaire Countertop Ice Maker model EFIC117. It doesn't come with one in the box, so this is my solution. Uses only approximately 3 grams of filament and prints in under 30 minutes depending on…

Downloads
136
Likes
17
Rating
5
P
Printablesdharriman

Frigidaire Replacement Stove Knob

Multiple knobs from my Frigidaire drop-in range were broken in various degrees. Replacements are expensive, so I modeled this myself in Fusion 360 with measurements taken from a mostly working knob. I printed mine in ASA/ABS for heat…

Downloads
134
Likes
11
Rating
0
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Cutout Saver

I've seen a few folks out there that have mistakenly removed the cutout thinking it was necessary for the optional filtration system sold by Prusa. Since I needed to remove the cutout for another project I was working on (fume venting), I…

Downloads
118
Likes
37
Rating
5
P
PrintablesSanka

(un)original drybox holder for Core One and MMU3 enclosed

Holder for use your (un)original drybox with you Core One with the MMU3 enclosed version. You still able to remove the lid. needed : 4 screws M3x8 4 screws M3x10 8 nuts M3

Downloads
114
Likes
43
Rating
5
P
PrintablesMichaelQ

Original Prusa Enclosure- Logitech C920 / C930 Mount

Model is designed to fit perfectly behind my "Original Prusa Enlosure - Raspberry Pi Mount with 7" Display" model. For the ball joint, you need: 2x M3 nut 1x M3 16 mm Allen head 1x M3 10 mm Allen head I am using a Logitech C930, it has a…

Downloads
104
Likes
26
Rating
5
P
Printablessamuel-t

[ REMIX ] Original Prusa Enclosure toolholder (LED stripe compatible, mirrored)

I have a sheet holder on the right side and the LED stripe installed. Thus, created this remix which mounts on an additional vertical screw and is mirrored for left use. This remix is inspired by the LED stripe solution provided in this…

Downloads
104
Likes
27
Rating
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Magnetic Exhaust Port System (No MMU Needed)

I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…

Downloads
102
Likes
46
Rating
5
P
PrintablesKikeMaker

Cadena de eslabones RIGIDA - RIGID link chain

Debido a una necesidad específica, creé esta cadena de eslabones que están unidos entre sí por lo que NO permite movilidad adicional a la mostrada en la presentación. Consta de 13 eslabones y un aditamento para ser unido con tornillo a un…

Downloads
86
Likes
5
Rating
0
P
Printablesbartosslajos

Original Nutcracker

Use 50%(+)infill, 4 perimeters to decrease the bending and turn on the support for the end cylinderical surfaces. There are some air boxes in the handle, don't waste support there. Additional necessary items , you found them on a Prusa…

Downloads
77
Likes
11
Rating
4
P
PrintablesNevl1

Magswitch Featherboard Original Extension

This is an extension to upgrade the origal magswitch featherboard to make it more like the latest version. Printing I used 5 perimitters and 5 top & bottom layers with 15% infill - printed on Prusa Mini+ Parts & Assembly All you require…

Downloads
76
Likes
24
Rating
0
P
PrintablesBrummy

EZVIZ C6N Camera Holder for Original Prusa Enclosure

Eine Halterung Innen für die Kamera von EZVIZ C6N für die Original Enclosure von Prusa für vorne Rechts oder Links. Bei 4,4 mm habe ich eine Pause für die M3 Muttern zum einlegen eingebaut. Schrauben sind M3 x 8 für die Kamera und M3 x 10…

Downloads
75
Likes
8
Rating
0
P
Printableszxb466

HD Better Basic Board Cover With Symbols for Original Prusa Enclosure

Print Instructions: I used 20% infill, 3 perimeters, Prusament PETG jet black and prusa orange, 0.15 STRUCTURAL layer height (for better quality). Position it with the symbols facing UP in PrusaSlicer so that the top part is nice and…

Downloads
74
Likes
23
Rating
5
P
PrintablesVoyager Crew

T-Loc Systainer clamp system for Shaper Origin Workstation

The T-Loc Systainer can also be used as a mobile workbench. Based on the following designs*), two special brackets for the Shaper Origin workstation were designed to fix them on the MDF board. The original rubber feet of the workstation…

Downloads
62
Likes
39
Rating
0
P
Printablesfiretech

Removable Sides for Lack Enclosure v2 (Pocket Doors and Original)

I wanted the sides of my Lack Enclosure v2 to be removable for maintenance access (without removing the entire top U-frame), while also using @Drakka01's excellent Pocket Doors remix , so I came up with this. Due to a request, I've also…

Downloads
62
Likes
16
Rating
4.5
P
PrintablesVisualReversal

Basic Board Cover for Original Prusa Enclosure (OPE) - No MMU

The single color version of the basic board cover is great except for one thing; you can't see where to poke it to turn on the fan and light when the room isn't super well lit. So, I decided to make a non-mmu multi-color version. And,…

Downloads
61
Likes
6
Rating
5
P
Printablesjako

Vertical Mount for Logitech C920 to original Prusa Enclosure

Remixed this mount to attach it vertical to the frame of the original prusa enclosure to get a good angle on the printbed. Easy to fix with a bolt and a nut (out of the spare parts in the enclosure kit) to the front frame - see pics. The…

Downloads
59
Likes
30
Rating
4
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Back Widow Left Edge Plug with Cord Pass Through

I needed a way to get a cord out of the back side of the Original Prusa Enclosure. After removing the small cutout on the left side I felt it needed something to cover up the hole. So, since DesertStorm's plug for the top of the enclosure…

Downloads
58
Likes
14
Rating
5
P
PrintablesMichaelQ

Original Prusa Enclosure (OPE) - Cable Managemet Clips for Under the Enclosure

Fastening cables with ties inside the enclosure is impractical for maintenance. It also makes less sense to pull all cables through the enclosure if the cable is only connected to components outside. This clip allows you to place the…

Downloads
58
Likes
9
Rating
5
P
PrintablesAndrej

Handle for Original Airpot Superroot Grow Tent

print parts with 3 perimeter, 30%grid & 0,25 layer height or use 3mf what u need (two handles): printed parts: 2xHANDLE (MorL)/4xHANDLE_MOUNT/ 16xSCREW_v2 4x screw M4x12mm or longer 16x screw M3x12 or longer, max: 20mm 4x M4x6mm heat…

Downloads
57
Likes
24
Rating
0
P
PrintablesHPC_Patrick

Roll holder for filament rolls for the (un)original Prusa box.

I have designed this reel holder to be as stable as possible. The holder was tested for 1kg castors, 2kg and 3.5kg castors. It has small bumps that hold the rolls inside the roll guide. The design is such that the filament cannot wrap…

Downloads
46
Likes
10
Rating
0
P
PrintablesMilan B

Trash Box for Original Prusa Enclosure, Trash Box

Filament Waste Basket or Box for tools that fit to your Original Prusa Enclosure. You can choose from two types of covers. (With text or with icons). Video detail link on youtube video . Print instructions PLA, PETG, Nozzle 0.4, 0,20 mm,…

Downloads
42
Likes
5
Rating
5
P
Printables_KaszpiR_

Original Prusa MINI Enclosure side mount bracket for temperature / humidity sensor

About Original Prusa MINI Enclosure comes with the temperature / humidity bracket which can be mounted only on the front/back holes of the enclosure, due to the fact that those holes are 60mm apart. I modified the Guide & Covers >…

Downloads
42
Likes
5
Rating
0
P
PrintablesMa77hew

Original Creality Ender 3 V2 Filament Runout Sensor relocating mount

My filament is located in a dry box and I've upgraded to a direct drive extruder so i needed a reliable mount that would keep my filament sensor properly oriented to the extruder. this one will slide right in no screws required, and then…

Downloads
41
Likes
4
Rating
0
P
Printablestechis

MMU Grommet Plug for Original Prusa Enclosure

Plugs for the MMU Grommet for the Original Prusa Enclosure. Please note, this is a press fit. It may take a little force to get it in and out of the MMU Grommet. 5 Variations so far: Solid plug Plug with USB cable cutouts top and bottom…

Downloads
41
Likes
9
Rating
5
P
PrintablesMa77hew

Original Creality Ender 3 V2 Filament Runout Sensor relocating mount V2

The original design using the supplied case had allot of drag, so I redesigned it to not use the case and this is so much better. It still auto-aligns to the extruder but the drag is drastically reduced. in place of screws you could…

Downloads
40
Likes
8
Rating
0
P
PrintablesHussain

Original Prusa XL- Single Tool First Layer Test

This is First layer test for the Original Prusa XL Single Tool 360 X 360 X 0.2 MM Available for Gcodes for PLA & PETG

Downloads
37
Likes
3
Rating
0
P
Printablesxs-society

Ikea Platsa (Un)original Prusa Drybox Filament Tag Leiste

Tag Leiste für Ikea Platsa Korpus um Etiketten der (Un)original Prusa Drybox Filament Box zu ordnen zu können ohne sich den Schrank zu versauen. Etiketten können leicht gelöst oder über geklebt werden.

Downloads
36
Likes
4
Rating
0
P
PrintablesMichaelQ

Original Prusa Enclosure (OPE) - Cable Managemet Clips for Inside the Enclosure

Fixing the cables with ties inside the enclosure is impractical for maintenance. These clips are minimalistic and do the job without ties. There are tree types of clips: Air-filter-hinged-lid: for the air filter cable only and used when…

Downloads
36
Likes
7
Rating
5
P
Printablesetarina

Nespresso Original Water Reservoir Cover

My first project! I received a hand-me-down Nespresso Original machine that was missing the water reservoir cover, so I decided to make a replacement. I've tweaked it so that it fits snugly, but still has air channels to keep the machine…

Downloads
35
Likes
3
Rating
0
P
PrintablesSurfalex2000

Original southern Spanisch Caña Rociera (Clap emulator)

These are handcraftet original made Caña from a real spanisch craftmen and Family of Flamenco dancers. This instrument is meant to reprudice the human clap, and be able to have a higher repetition. This is a very special southern…

Downloads
35
Likes
16
Rating
0
P
PrintablesGizmo Gurus

DriftJug Mini – The Rigid, Reusable Bottle for Self-Watering Pet Bowls & More

Overview: Tired of 2L soda bottles collapsing and crinkling in your self-watering pet bowl? DriftJug mini is the sturdy, reusable solution that won’t deform, leak, or look terrible over time. Designed to keep water flowing smoothly for…

Downloads
31
Likes
9
Rating
0
P
PrintablesDennis Judd

Frigidaire deli drawer clip FRFS2823AD

So our newer Frigidair has a deli drawer that keeps popping out of it's connection to the sides when you pull it open (there's a pic of it like this) so I printed this clip to prevent that. I didn't need any tape or glue it just popped on.

Downloads
23
Likes
3
Rating
0
P
PrintablesNoodlecraft

Robust 1/4"-20 Camera Mount for Prusa Original Enclosure

This is a rock solid mount for any camera equipment that uses a standard ¼"-20 screw. The mount is modeled after the spool holder that comes with the Prusa Original Enclosure. It screws perfectly into any of the enclosure's corner…

Downloads
21
Likes
2
Rating
4.5
P
PrintablesAlian

IKEA Jerker - Raccord pour Réhausse (Original et Rallongé) / Extension Connector (Original and Extended)

Raccord IKEA Jerker pour réhausse Ceci est le raccord pour fixer la réhausse du bureau IKEA Jerker (j'ai un V1, mais cela doit aussi fonctionner pour sur les montants d'un V2). Quand on dispose de l'option réhausse (qui se monte au-dessus…

Downloads
20
Likes
2
Rating
0
P
PrintablesSean Kane

Frigidaire 318242275 (Electrolux ICON ) Stovetop knob base & post strengthener

This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…

Downloads
19
Likes
0
Rating
0
P
PrintablesMichaelQ

Original Prusa Enclosure - MK4/MK4S xLCD Cable Quick Release

Now that I've switched from the MK3S+ to an MK4S, I needed another Quick Release for the Original Prusa Enclosure. There are already a few quick releases for the MK4S on Printables, but I wanted another one like mine for the MK3S+ . This…

Downloads
18
Likes
14
Rating
5
P
Printableshachleitner

BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones

BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones or have a broken strap eyelet The strap eyelets on the title picture are printed in PETG Galaxy Silver Caution: The…

Downloads
18
Likes
1
Rating
0
P
PrintablesThunderhead

Original Prusa Enclosure- Logitech C920 / C930 Mount - with passthrough ziptie recesses

Please check out MichaelQ's original model to get the other files required: https://www.printables.com/model/375059-original-prusa-enclosure-logitech-c920-c930-mount

Downloads
17
Likes
3
Rating
0
P
PrintablesPeopleware

Deckel für Aufbewahrungsbox mit Optionaler Ladefunktion für Original Apple Watch MAG Ladekabel

Die Beschreibung dieses Deckel Set richtet sich vor allem an diejenigen, die das u.a. bei Amazon erhältliche “ Brandsseller Aufbewahrungsbox Dekobox - Rattan-Optik - 3er-Set schwarz” (Link: https://amzn.to/3VxbGMG ) bereits besitzen. Ich…

Downloads
17
Likes
4
Rating
0
P
Printablesfirebone

Renault Kangoo 3 - MagSafe adapterplate for original Renault smartphone holder.

Adapter plate for original smartphone holder Renault Kangoo 3

Downloads
15
Likes
0
Rating
0
P
PrintablesMiAb

Original Prusa Enclosure MK4 Mülleimer vor dem Drucker / Garbage bin front

It's a garbage bin which can be placed in the front of the printer in the Original Prusa Enclosure. I designed it to use the free space in front of my printer within my Original Prusa Enclosure. Notes: I printed the objects with 0,2mm…

Downloads
12
Likes
3
Rating
0
P
Printablesmrprometheus

Tow rope pulley guides for cheap rigid casters

We made a diy tow rope for sledding/skiing/snowboarding in our backyard. Recently we upsized our rope from 3/4" to 1 1/8". The larger size required larger pulleys. Things started to get pricey scaling it up so went with hacking together…

Downloads
12
Likes
2
Rating
0
P
PrintablesFélix

Microwave door handle fix (Frigidaire FMT148GPB1)

These are fixes for the plastic parts that hold the handle. It is compatible with the Frigidaire Gallery series model FMT148GPB1, I'm not sure about any other. I've also included a larger bottom part (our microwave door's whole corner was…

Downloads
10
Likes
2
Rating
0
P
PrintablesJµ§tïn

Boîte à lunettes en forme de mini-frigo – Design fun et original

Ce modèle 3D est une création originale , imaginée comme une boîte de rangement pour lunettes en forme de petit réfrigérateur . Le corps principal offre un espace intérieur adapté à la majorité des montures, tandis que la porte façon «…

Downloads
6
Likes
1
Rating
0
P
PrintablesHawkeye

0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope)

0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope) , which can be applied for focus automation.

Downloads
5
Likes
1
Rating
0
P
PrintablesHawkeye

0.8 MOD gear 60T (for the original focuser wheel of the WO Z61-III telescope)

0.8 MOD gear 60T (for the original focuser wheel of the WO Z61-III telescope), which can be applied for focus automation.

Downloads
5
Likes
1
Rating
0
P
PrintablesFalling Entropy

Smiley Emoji - Spoolholder Cap for Original Prusa XL and Prusa Core One+

spoolholder cap, printed using PLA (glow-in-the-dark green chosen for the pictures) smiley face comes from my stamp model here:

Downloads
2
Likes
6
Rating
5
P
PrintablesDom Cis

Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research

Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…

Downloads
49,604
Likes
3,822
Rating
4.7
P
PrintablesMarlfox

ALL iPhones 11-16 have been uploaded + NEW PARAMETRIC CUSTOM FILE for ANY Phone and Case | iPhone Standby Mode Dock Remix | Original by ScottYu-Jan & OVERWERK

A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…

Downloads
13,542
Likes
3,164
Rating
4.89