12,172 models
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
Inspired by the 2.5" version: https://www.printables.com/de/model/212758-25-inch-hddssd-caddy-for-multiple-drives I designed a similar one for 3.5" drives.
A rubber band-driven toy car made of parts of the new 3D-printable Stemfie3D construction set. Print instructions This toy car is easy to 3D-print and quick to build. It is the first project demonstrating the new and fully 3D-printable…
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
I created this remix because the original version was a bit larger than I needed, and I wanted to fit the cables in more snug. The original also broke when I went to attach the zip-ties, one bit snapped off. It was still usable, but I…
Gridfinity screwdriver holder for Craftsman screwdriver set.…
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Organize your drill/driver bit cases using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports. Printed with OVERTURE PETG Filament (Grass Green).
I based the design on a model by georgeprout on thingiverse - I added space for two more bits Original stl and SCAD file here: https://www.thingiverse.com/thing:4395136 This is a bit holder for 6 standard quarter-inch bits for a DeWalt…
Use this to store and organize your hexagonal bits, driver bits, impact bits, screwdriver bits , socket set bits, driver adapters, as well as hex mounted drill bits. -Simply place the hex driver bits in vertically and spaced as desired.…
This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…
For GMT800 (1999-2007 GM/Chevy Trucks and SUV) arm rest switch panel replacement clip. This will need to be glued or epoxied in place. Trim old clip location on the arm rest and place this part into the hole underneath. The model is for…
Only tested with PET-G, PLA might not be flexible enough. Hole for a 6mm Allen wrench. Raised model has two small sections raised 0.6mm above the rest of the model. Print in different colour for best results. This harmonic drive consists…
Deteriorated Bone Material or a Pile of River Rocks. Figured this could be used in a Gamefold or the ilk.
This is a open frame chassis for Raspberry Pi 4 with 2x 2.5" HDDs/SSDs. You can mount drives with a height of 15 mm. The holes in the Raspberry have a diameter of 2,7mm. Therefore i drilled them to 3mm. BOM: 4x 20mm M3 screw (pi mount) 4x…
This is a simple block for storing SD cards and flash drives. Printed mine with an 0.4 nozzle and 0.2 layer height. If you print the model upside-down (with the holes on the bottom) you'll get some really perfect holes and a smooth…
Handle that fits the standard ¼'' hex bits. There are plenty of great models of compact bit drivers out there but I couldn't find one that is the size of a “normal” screwdriver so I made one. Prints without supports
G11 drive tray for 2.5 inch drives for Dell R610. I edited the screw holes to fit more common screws used for 2.5 inch drives. Edited from a different version found on Thingiverse ( https://www.thingiverse.com/thing:3715861 ) Print…
This otter figurine captures the playful spirit and sleek form of this beloved river mammal. Ideal for collectors, educators, or decorative purposes. Printing : Compatible with FDM and resin printers Supports : Needed under paws, tail,…
OOONO-Driver Halter für Mercedes B-Klasse
All current Formula 1 drivers as of now. Fun as a gift or just for your own use :) Comment if you want other iconic drivers! Currently added: Max Verstappen Sergio Perez Fernando Alonso Lewis Hamilton Charles Leclerc George Russel Carlos…
BACKGROUND: The Elecraft KH1 blew up the portable HF radio operating scene when it was released. It covers 5 bands from 40 - 15 m and has an internal ATU and battery. It's actually designed for hand-held use. But with the standard whip…
I printed the various socket organizers, and my son has this set of Pittsburgh color-coded metric deep impact ½" drive sockets he asked me if I could print him a tray. I couldn't find one already made, and did find the actual sockets…
The is the new driveshaft that will be used in my RC Car V2, five times ! It drives the wheels (that's 4) and is also used for the front transmission. The overall length is ca 60 mm and it is still a double universal telescopic joint.…
[Additional model files added Feb. 10, 2020] [Additional file added for microSD card module Apr. 30, 2020] This is for holding flash drives and SD cards and whatever. I believe this has some advantages over other designs: holds odd shaped…
This is a horizontal (box) or vertical (wall) mount for the Milwaukee M12 FIWF12 0.5inch impact driver. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).
This is a remix of johnzanussi's Williams Screwdriver Bit Holder. I liked the original bit holder a lot, but it didn't hold my bits tightly enough. So I made a couple improvements to hold the bits more securely. Compared to the original:…
Use a PC disk drive externally with this cover
I have a unique space and I wanted something to “holster” my M12 installation driver on the underside of a shelf above my standing desk. Most options I could find were wall mounts. I printed it with minimal supports standing up. Due to…
Inspired by https://www.printables.com/model/394330-hex-bit-holder-removable
This simple practical print slides onto telescoping hex-shaft bit-drivers so that you can more quickly start/tighten screws, bolts, or nuts before switching to a ratcheting handle. Originally designed for the Harbor Freight T-handle Bit…
I've also included a gcode file for a Prusa Mini/Mini+ which has a Pause At Height for letting you put in the magnet. Note : The pause occurs approximately 21 minutes into the print. CAUTION : I'm not sure if it's an issue with the Prusa…
These are holders/caps to add to this model to make it easier to spin in your hand: https://www.printables.com/model/126060-fidget-drive I really liked this fidget spinner, but wanted some holders to make it more satisfying to spin in my…
Center Drive Roller with One way slip gear for Filamentalist Rewinder
Screwdrivers holder with places for: popular jewellers 11piece screwdriver set 14 screwdrivers with max 4.1mm diameter 2 screwdrivers with max 7.9mm diameter Tongs holder with place for: 8 small tongs 2 bigger tongs 1 pair of scissors
When designing a 3D-printed river model, remember that rivers increase in size and volume as they flow from their source to their mouth. They always flow downhill due to gravity, taking the path of least resistance. This causes rivers to…
Stackable boxes/rack for WD elements external hard drive or similar drives. The stand holds everything at 15° angle for better airflow. Print with .3mm layer hight to save some time. Easy to permanently fix together with some glue.
Holster for Gerber Center Drive. Mounting methods: Molle 1in by 1.5in Flatback for adding your own mounting system Right-handed I couldn't find a sleek, minimalist 3d printed holster for my CenterDrive online so I threw this together.…
On reading the comments from the original it appeared the screw holes were being reported as to small. https://www.prusaprinters.org/prints/55082-universal-cordless-drill-hanger So before printing I added an extra screw hole and increased…
Nice Nut Driver if you have limited access for positioning M4, M5, m6 or M8 nuts. OnShape Link for M4 Grip: https://cad.onshape.com/documents/e9249799cb5c0950f5b22173/w/4cc45d709fd5975ffa6b50cd/e/8e683669ca7719ded1337aa6 OnShape Link for…
A quick and effective way to mount one hard drive on top of another, perfect for cases with a single HDD mounting slot. Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P as well as all Elite 501 and 301/2 Cooler Master…
A tool rack to hold the Wiha 26491 5-Piece Ball Metric End Hex Driver Set. Meant to be affixed to the front of a 19mm or 3/4" shelf with 2 drywall screws. Print instructions .2mm layer height, 20% infill, PETG or whatever should be fine.…
I found this inventive vent clip: https://www.thingiverse.com/thing:3880775 However, it's intended for right hand drive Focus MK3 ST and RS models. Since I'm in the US, I sliced up the mount in Tinkercad, mirroring the asymmetrical…
Bit screw driver with print-in-place freewheel that uses a 3x3mm tubular neodymium magnet to hold the bit in place. There is an option for half length and normal length bits.
When working with small screws it's convenient to use screwdrivers that are designed to be rotated with the fingertips rather than by turning the whole hand. For this to work well the back cap of the screwdriver must be able to rotate…
A little socket holder that I mainly use for grouping random/loose sockets in my toolbox and for grabbing small sets of sockets to carry around (hence the 'pocket socket' name) when working on something specific. It keeps me from having…
This is a fully parametric stand for small screwdrivers and similar tools. There are pre-made models and gcode files for download here with 8x7 and 5x5 holders which fit the "Wiha PicoFinish" line of tools. The source model on OnShape is…
This is my fifth take on this crucial part… It will be used on the front axle of my new RC car project - Peugeot 3008 RC. This time I wanted to reduce the size as much as possible while still using no screws and keeping the ability to…
This tool is used to install the drive pinion oil seal for the rear diff on a ford flex (and other ford models). The actual ford tool has part number 205-208. I guessed the dimensions by measuring my diff and looking at pictures of the…
A compact and practical storage holder designed for 2.5" HDD and SSD drives . The holder can store up to 10 drives and is compatible with both 7 mm and 9.5 mm thick disks , without any adapters or modifications. Each slot is shaped to…
Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…
This is a remix of this design, but for MINI printer. It is exactly the same model, but I removed one cork perimeter allowing this great design to be printed on the MINI! I attached the f3d model for anyone interested! 10/04/2022 Uploaded…
My desk was cluttered with hard drives, the Blu-ray burner, their cables and other smartphones. So I designed these elegant boxes to put things in order. The boxes are of two types: for 4 hard drive or smartphone slots, for a Burner or…
Tips are appreciated and go towards creating new designs Note: The whole thing was of course glued, sanded, painted, etc. You can get all of the instructions and details over at my instructable which I have published on this very thing:…
This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into the style of classic consoles, this ones…
A very simple and convenient magnetizer (demagnetizer) for screwdrivers from magnets from 2.5 inch hard drives. All you need to do is print the two halves of the box, insert 2 hard drive magnets into them and close the box. The magnetizer…
There are many different types of mounts for Wera screwdrivers, but sometimes you only need two or three. Here are single mounts in two different sizes for screwdrivers, which can be arranged on a pegboard as you see fit.
This is an external slimline disc drive enclosure. It was designed around a 12.7mm Disc Reader out of an old Dell Optiplex, but any Laptop/Small Form Factor 12.7mm DVD/CD Drive will fit. (9.5mm drives may fit too with a bit of ingenuity)…
Eklind ball-headed hex driver holder for the 92500 and 92600 hex drivers. EKLIND 92500 PSD Ball-Hex (allen) Precision Screwdriver - 8pc set SAE Inch Sizes .050-5/32…
A quick remix a this amazing parametrix box, for screwdriver bits storage. You ca add a 10x5x2 magnet to lock the bit holder in place.
6mm Knob using Rivet-Nut Insert, Nut-Sert, or Nut-Cert I wanted some knobs that matched the blue CF arm. https://www.bulletpointmountingsolutions.com/ Here is my fix. I used 3D Fuel PRO-PCTG (Cobalt Blue)…
Note that these parts were made for the VINCA 6" Digital Caliper, DCLA-0605 , so they likely won't fit other brands or models without modification. Step versions are included to facilitate this. These models are designed to allow calipers…
A simple yet functional bit storage solution for the Williams WRS-1 Ratcheting Screwdriver. It may also fit certain Snap-on ratcheting screwdrivers due to them being similar in design. Holds 6 standard 1/4 inch screwdriver bits and fits…
Box for flash drives, opening on two sides. Lid without spontaneous opening.
I wanted a nice way to display my headcovers but couldn't find one online so I designed these. The clearances are very tight so sanding may be necessary. This model is for drivers, I also have models for fairway woods, hybrids, and…
I love the Honeycomb Storage Wall by @RostaP enough to now have a 30-panel wall in my workroom - covering 108cm x 111cm (nearly 4 feet x 4 feet)! All of the outer panels have a solid frame thanks to the fabulous Honeycomb storage wall…
This part is designed to to hold a piece of foam or other material over the driver to tweak the sound signature. Installation: Press the part carefully on the driver assembly, (glue is not necessary). Printed with Creality Ender 3, using…
This will allow you to mount a 120 mm fan above your PCI slots for extra cooling. I use a 2mm bolt to attach the bracket to the case as that is about the size of the slots on the case. The bracket will accommodated a fastener that is up…
A simple mount to keep your Ryobi drill or drive packs under a shelf. Use two business cards as a spacer between one mount and the Ryobi pack to get the spacing right before screwing into your shelf.
Holds the Wiha 26197 Precision Screwdriver Set. Solidworks and STEP files are included for remixing. The finished assembly requires 4 M3 x 20mm screws (McMaster PN: 91292A123 ) and 4 3/8" adhesive backed bumpers (McMaster PN: 95495K931 )…
My dad asked me to buy a small screwdriver that could take a standard 6.3mm hexagonal bit, so instead i made one with his request , large base but low height . I'm sharing it since a lot of people where he works wanted one too , hope you…
This is a horizontal (box) or vertical (wall) mount for a milwaukee drill driver type 2407-20. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).
This model has several unique features including The threaded driver rods have a triangular cross-section which maximizing build surface contact while minimizing filament use and build time. This configuration ensures there are always 3…
Subaru transmission seal driver for shifter linkage fit 2002 to 2007 6speed transmission. Should fit other years but can't confirm. Can't confirm for 5speed either. Let me know !! Confirm for oil seal part number: 806716070 Make sure to…
Este soporte para destornilladores Wera, impreso en 3D, ofrece una solución práctica y organizada para almacenar tus herramientas. Diseñado para maximizar el orden y la accesibilidad en tu taller, este estante está hecho con material PLA…
This is a simple enclosure to mount the OpenFFB TMC Motor Driver & STM32 Controller stack and provide some level of protection to circuit boards. Learn more about the OpenFFB project here: https://github.com/Ultrawipf/OpenFFBoard/wiki…
I made a remix of the Toy Tools screw ( https://www.thingiverse.com/thing:2010291 ) for the Lego Duplo screwdriver (no. 31289) So its compatible with the nuts of the Toy Tools Collection. https://www.thingiverse.com/Goofy34/about…
Prints nicely in PLA, no supports needed. Since it's kind of large, I used glue stick on the print bed to make sure the corners didn't lift during print. Fusion360 file is included if you want to store more or less sticks (adjust User…
Direct Drive Extruder Assembly for V6 Hotend and CR10S PRO Dual-Drive Extruder for Creality machines Needed: 2x Short screws M3 1x Long M3 screw 1x Slightly Longer M3 screw 1x M3 short screw/glue - attaching angled fan holder piece Parts…
This is a bin designed specifically to hold the 7.2v Makita DF012D power screwdriver for Zach Freedman's Gridfinity system. It may also fit the impact version (TD022D), but I don't have one available to verify. If you are unfamiliar with…
The mount is designed to use the Odrive S1 heat spreader. It aligns the motor shaft with the magnetic encoder and leaves a 1mm gap between the magnet and the encoder. A 6mm diameter an 5mm thick magnet sold in the Odrive shop is used. The…
This is a notched trowel for the final hard coat of an epoxy table. Made with 1/8" x 1/8" grooves for a smooth and level finish coat. I couldn't find one out in town made of a softer material (don't want a metal one that might leave…
* Perpendicular to the Pegboard for easy access and reduced space usage * Clamp Bracket design to prevent it from falling * Strengthened Load-bearing capacity Please glue the parts. *"kitbox holder.3mf" is the holder for the toolbox*…
New 3.5" conventional platter hard drives with a capacity of 6TB or greater have different screw placements than old ones with less capacity. The sled trays that go in the bays of an Apple Mac Pro tower computer will not fit these drives,…
Skadis Halter für Modelco.fr Schraubendreherset, anpassbar für andere Durchmesser. Als Haken wurden Standarthaken für das Skadispegboard verwendet. Skadis holder for Modelco.fr screwdriver set, adaptable for other diameters. Standard…
Screwdriver holder for desk with wall mounting. A practical and robust holder that combines desk and wall mounting. I recommend PETG material and the color of your choice. The hexagon size is 9 mm. Thank you for downloading and I hope you…
Overview: This is an addition to the Gridfinity storage system designed by Zach Freedman of Voidstar Labs who “stole” it from Alexandre Chappel. I made this storage box for a DeWalt Ratcheting Screwdriver Set. It uses a 4x2 area of the…
UniTak3D Direct Drive Filament Runout Mount This is the 3D object that lets you mount the Filament runout sensor with the UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket . This is designed to work with the Original Creality Ender…
Octagon that holds up to seven bits that attaches to a keychain. The bits can be easily used from around the outside but can also be placed into the centre for a different grip. There's a tight fit so the bits don't fall out and get lost,…
Upload of my model created in October 2024. It was printed on a Prusa Mk3S+ and since printed on a Prusa Mk4S. All I have done here is take the excellent Rack for External Toshiba HDD Drive by @dronestationpro and modified it to fit all…
Case for a set of 7 Hexdrivers. There seem zo be quite a lot of very similar versions of these hexdrivers out there. Case has a snug fit lid and drivers can be easily removed by pushing the tips down into the case.
Modification of original Malolo's screw-less Raspberry case - “Bottom_Base_SM” with additional slot for SSD drive's PCB ! Make sure to adjust the pillars spacing to fit the holes of your PCB ! Instructions: Pop open your SSD drive and…
