2,902 models
I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid…
So tired of untangling my ECG cables, or honestly watching my EMT untangle the cables according to my partners. One for each, 4-lead and 12-lead. Printed at 12% infill using PLA, will see how it holds up. It is a friction fit for the…
Part These splitters can be combined with Party Flags by Quin | Download free STL model | Printables.com . Printing tips The flag face should be only one layer thick, so make sure your first layer prints well. The models work best with a…
This is my mod of @WLCD_471142 s AWTRIX enclosure. Big shout out for his awesome work: https://www.printables.com/model/863847-awtrix-enclosure AWTRIX is an fun ESP8266 based IOT clock with lots of features: https://docs.awtrix.com/ It…
I designed this to cut pills into smaller, more manageable doses. It's typically used to divide tablets that are not scored (pre-marked for splitting). This allows for an easier more precise method of medication management, especially for…
The levinson keyboard available here: https://keeb.io/products/nyquist-keyboard-pre-built Great alternative to the preonic. I made this case using OpenSCAD and then imported into FreeCAD to do filets. You can find the magnets on Amazon…
Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…
Update 2023-11-07: Added a “long slot” version to accommodate some inconsistencies in the length of the PTFE tube sticking out the back of the printer that feeds the hot end. I want to thank users @xenon2008 and @Tvorim3D for leaving a…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…
This split-flap display sets itself apart by being almost completely 3D-printed. The flaps are printed by changing the color mid-print and mid-layer. The case is also completely 3D-printed. Video of the display in action (with sound):…
This is a Remix of the awesome Samurai Mask Model 3 by flioink. I split the tooths and fangs so they can be printed in different colors on a regular printer. Just cut the imperfections with a knife on the teeth and mask to prevent a gap…
Please download from Makerworld. This STL is not the latest revision.
Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…
[ Information ] A sister model of this “Split Ring” is available on the following page. “Oval Carabiner (7 sizes)” 2 shapes and 6 sizes each. A removable ring that is harder to use than carabiners. But I wanted something sturdier with a…
A splitter as already presented here, but not with magnets, but with M3 screws attached to existing threads. It is available in two versions. Once flat and once an arm rotated by 90° in the direction of the spool, in order to be able to…
The Mandalorian Darksaber model designed by Polymath314 is gorgeous and I wanted to print it with the right color filaments to avoid painting anything so I split it up. The biggest challenge was splitting up the vertical stripes to still…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…
Karambit split into three separate models
Update 2023-08-01 #2: NEW VERSION! I have created a new and improved “no-catch” y-splitter Check out and download the new version here: Bambu AMS No-Catch Y-Splitter PC4-M10 I want to thank everyone who who downloaded and posted makes and…
AC Power Cord splitter (Kettle Cord) mk1 This was part of my 3D Printer enclosure projects to tidy up the cables on the back of the enclosure. Uses a standard ‘chocolate bar’ electrical connector This design comes with: The body of the…
This Fitting Insert is inserted into the threaded end of the “Y” Adapter PC4-M10 PTFE Connector to reduce the chances of the filament getting stuck as the filament exits the “Y” Adapter and goes to the printer. I printed @EdJohnson's…
These are not as good as buying real release rings that have metall teeth , but they have worked for me without any problems. I am lazy and didn't want to order the extra parts recommended for Brandon Raineris great Over engineered…
Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…
UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round…
Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would…
I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…
I just split all letters up to use as Modifiers in Prusa Slicer 2.4.0 Enjoy. :)
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** First I took on the challenge of creating a STRONG split key ring for everyday…
Wye? Y? Thinking they really should be wye since that's what they are called in plumbing. ...ANYWAY... Why another wye? Obviously because none quite worked for me. I had issues with friction and really bad luck with crappy imported…
Reupload of https://www.printables.com/model/909348-soldering-tool-holder-flexible-arms-helping-hand-v split into single part files. I have respected his model licensing, however am unable to select a different origin as it won't let me…
A tool to easily insert cables into split wire loom tubing. I created this tool for a friend in sizes 8.5mm, 10mm and 13mm. If you need another size you can just take the 10mm version and scale it. Please leave a like if you enjoy my…
Hose splitters for all common (at least what I could find online) hose sizes. Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split. All adapters have:…
Tube Y fittings for connecting different sized soft tubing together. Has Barbs to give a secure fit on the hose. Designed to need minimal support. Print standing up with larger end on the bed. Brim might be helpful for the smaller sizes.…
World Cup Split . As my printers don't recognize the filament change command (M600) and after struggling with alternative approaches like Cura's Search and Replace or OctoPrint plugin to support M600 and such, I decided to split the cup…
T800 taken from many components here on thingyvers. I decided to whip up a T800 bust for a mates birthday. Then I got carried away and designed these make shift shoulders, then I couldnt help myself again and added some hands and so on.…
This model is for a split binder ring that can be used to attach things like notecards together. They latch well enough for regular handling, but are not as secure as metal rings. The rings have a diameter of ~24.5mm and a thickness of…
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Bambu Feed Splitter UPDATE Purpose Many versions of these are available on the site. They attempt to solve a basic problem when dealing with the AMS. There are filaments that will not a few the AMS for a few reasons. This means that you…
This version's skull is rotated and cut so that it needs about 55% less support material. The parts must be glued together; I recommend Acrylic Cement, which melts the parts together really well. The split for the sword pin is...…
Brackets to support the heater bed cable from drooping down and snagging destroying itself. Includes a place to use a tie wrap if you wish but don't need it 25% Gyroid infill. Alternative New Version : Anycubic Kobra 2 Max Bed Cable…
A fully printable and easy to assemble split-flap counter. Print instructions No support is required. I printed the parts with 2 perimeters, 10% rectilinear infill and 0.2mm layer height. I recommend splitting the flaps.stl in PrusaSlicer…
Split bins for when you need bins larger than what your print bed can fit. once printed you would use superglue to join the bins back together. You have the option of with or without tabs to help align the bins and straighten up where the…
It has been bought to my attention the helmet was done by Dan Inskip over at the MiniFactory. For those of you wanting to print the helmet complete on say a CR10. head on over to the link below and give thanks to Dan for his great work.…
Quick guitar knob, wanted some black ones for my 335, but now im thinking about making them out of tpu....will update. ** UPDATE ** TPU knobs are awesome! printed at 215/55c 25mm/s 7% infill they are nice and squishy! Print Settings…
Y-splitter to make it easier to print with or without the AMS. Designed for standard profile PA-CF or PAHT-CF, 0.3mm layer height, 0.6-0.8mm nozzle. The fittings just threads right in. Uses 3x PC4-M6 which can be ordered of Amazon of Ebay…
I call this the "Instant" version of a Y-Splitter, because it requires no separate purchase of Bowden connectors, just print all necessary parts! Basic Features: No extra parts needed, click and print. PTFE tubes held in place securely by…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I was originally looking for a key ring that was 1) easy to use 2) easy to print…
I use JDJDJD's excellent Smoothy Y-splitter for Bambu's AMS on my P1S and tuned it for my newly arrived K2 Plus. Much of the instructions are provided by him, with thanks. You will need 3 x PC4-M10 ‘black’ connectors which screw into the…
Simple little magic trick that makes an object appear to be split into three pieces and then repaired back to its original shape. I saw a video of this trick online and wanted to model one myself. Can be used with the included stick files…
About the Splitter: Most Y-splitters are printed vertically, which can cause unwanted filament friction inside the part. To solve that, I designed the Quick-Lock Y-Splitter . Thanks to its horizontal print orientation , the filament…
This is a remix of the Sea of Thieves Megalodon by mordekain . I smoothed out a lot of the model to remove the semi-low poly look of the original and split it into pieces for easier printing. A very minimal amount of supports are needed…
Check out the full tutorial on my Youtube page! This is a remixed version of Killonious' model (which was based on the helmet by Jace1969). The changes I made: Added the lamp holes Added the 3mm LED fixtures (to be printed out of…
Remix of @EdJohnson 's design, with the following changes in order to avoid snags; AMS and Spool entry PC4-M10 connector threads previously did not bottom out as the outlet port did, so made all PC4-M10 entry threads bottom out (metal nut…
Cable Gland designed to be installed on cables with plugs attached. The design includes a feature to center the gland in holes bored to fit the cable plug. An o-ring groove is also included to prevent the cable from moving inside the…
Headphone Stand V2 This is my split version. I tested the connections on Makerbot Version. If possible, publish your print on the Make tab. Tips: Paypal: https://www.paypal.com/donate/?hosted_button_id=XPLQK39DNVVSU BuyMeACoffee:…
A scaled-up version of the original, and then split and modified to allow easier printing, and for being able to join them back together. You can use as three split ramps, individual jumps or all joined together. I recommend printing with…
This keychain is a replica of Obi-Wan Kenobi's lightsaber.
This is a 4 inch duct 2-to-1 splitter that is fairly compact and easy to print. No supports needed. See also the Endcap model here: https://www.printables.com/model/637194-4in-4-inch-duct-splitter-endcap Source document:…
I found the model easier to print this way, just put the large flat surfaces down on the bed. It does print better with support. This also allows for a cool two-color effect.
Kpop Demon hunter Huntrix(Huntr/x) light Stick - split to print remix I did some fusing and splitting to print the models easier (for my machine at least) and without supports. It will require some glue to connect the pieces. There's also…
A more simple Y-Splitter for the Bambu Lab AMS PTFE connection.
I believe this is the original https://www.thingiverse.com/thing:3835069 I split the model to try and optomise the print for the Prusa Mini. I printed with Prusa Basic PLA @ 15% infill, 0.15mm layer height. Supports from the build plate…
With the help of the Fusion360-file of the version2 (with mounting hole) of the Y-Splitter remake of Brandon Raineri, I have adapted a version with M10y1mm PushFits, since the recommended McMaster-Carr part is hard to get in Europe. I use…
Es ist ein Modell nach einem Schwertes aus Genshin Inpact. Das 3D Modell würde für ein Cosplay nach Bildern erstellt. Die Einzelteile passen auf eine Druckfläche von 270x200. Die Gesamtdatei kann aber auch selber in Teile zerlegt werden…
Found this awesome file here http://www.blendswap.com/blends/view/86558 I spent the last week stripping the shells back. If you would like the suit you can grab all the files already devided up over at my shop on Etzy and create your own…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
*** Update 22/12/2023 *** Added a version with webs between the legs and the angled tube, to make it easier to insert the tool into the tube, and to add strength to the legs. Inserting cables into long lengths of split convoluted tube can…
Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…
DIY Handwired Split Mechanical Keyboard | The Ortholily This is my DIY mechanical keyboard design. It is split, handwired, ortholinear and 3D-printed. The layout is based on the Lily58 but ortholinear and capable of tenting. Some Notes:…
This is a splitter that turns one fan header into two. It makes it much simpler for wiring up toolheads that have two part cooling fans (Dragonburner, Xol, etc). There are two types of the main body. One designed to fit in the space on an…
This is a brand new complete case for Corne Keyboard (https://github.com/foostan/crkbd) new version 2024 4.1 It have integrated spacer for perfectly fit and support PCB, renforced plate to give a better feeling when mounting and typing…
I have 2 & half incomplete full size R2D2's and of course you can't have them with out R2's favorite side kick C3PO. Started the head thus far and will up load more files of the body as time permits, Cheers Jace 1/06/2017 Just started to…
Are you breaking your fingers trying to snap those tiny pills? And the cutters with the blade send them FLYING! This small pill snapper gives you the right angle and force to snap those pills with ease! And it fits in most prescription…
This is a tool for quickly inserting wire bundles in to split looms, sheaths, or wraps. This video shows how the tool is used. There are versions for ½" and ¾" wraps. CAD on Onshape
Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4) or glued on after you slot it in the gate.…
This is a remix of the original File by Back37strad. My main goal for this was to make an actual knob smaller compared to the original in height. You can see in the images how it compares to the standard knobs on my beautiful Ibanez…
Please give it a 💖 if you like it 🥰 🪧 My Kobra 3 slicer profile 👉 https://www.printables.com/model/1019343-anycubic-kobra-3-combo-slicer-profiles-for-anycubi You can get a second Ace Pro there: on Geekbuying 👉 https://kgy.yt/ganyacepr on…
Baldur's Gate 3 Artefact by uprisingfx - just split into 2 halves so I could print it better on my FDM printer, then I glued the 2 halves together. I had some very small supports for a couple of the ridges where I had split it. It's not…
3D print file for QUADMULA Djinn F25
Materials: 3 x PC4-M10 pneumatic connector, inner diameter: 4 mm 2 x M3 6mm Settings: Support BUILD PLATE ONLY Brim-object gap 0.3mm
I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates the need for frequent reconnections. Please look for pc4-m6 “through” type, for reference…
I repaired the model with 3d builder as the model had impurities, and i also split the model in half with also flag separate for easier print and glue with blender. Next up is to make sails thick enough for a common 0.4mm nozzle to be…
Hey everyone, I've been looking for the Y-splitter which: -Looks good -Works well -Can be attached to the frame -Get ride of the stock coupler -Is invisible from the front of the machine Well… I had to roll my sleeves up ! Here is my…
This is a Multiple Tube Splitter for Bambu Lab A1 and A1 Mini with AMS Lite. Just insert the 4 PTFE into the splitter. You dont need an extra PTFE extension underneath to the genuine hub. The filament at the two slots behind of it (Slot…
Cigarette Splitter that makes it possible to smoke 4 Cigarettes at once. Smoking is incredibly harmful to your health and can lead to serious and life-threatening conditions. Avoid smoking at all costs. If anyone has any questions please…
My boys had watched a classic spy movie and were intrigued by the pistol with a silencer. So I made a couple for them to play with. They look really good and the lads are enjoying playing good guy bad guy in the yard. You can size them up…
Print with ABS or PETG. Use auto rotation, no support. Don't use too much force when screwing in the PC4-M6's. Screw the small part to the printer (see picture), remove existing screw first. Remove the coupler from the printer. Screw in…
New items here are: 1/ a template for cutting out plastic lenses 2/ gusset for lenses 3/ a split of the original plage_doctor_whole.stl With the lens template I trace (inside) on paper, then tape the paper to a flat section of blister…
Improved PTFE tube grip for more secured grip. Added two hidden very strong Prusa magnets for easy and quick mount. Changed to M3x8mm bolts without any inserts. To assemble and mount PTFE Tube Y-Splitter you will need the following*: M3x8…
Just mirrored the 32mm connector instead of the garden hose. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 25 Filament: any PETG ABS any Notes: Just mirrored the 32mm…
I found the relocator of SPEKERDUDE but not the Y-splitter he used. So I found the Y-splitter of InterlinkKnight and put them together for my Anycubic Kobra S1. You will need three PC4-M10 fittings and two screws M2,5 x 4 mm. If you could…
As the name. You need 5 JP4-01 or PC4-M10 to use this. The JP4-01 has shallow cut so it's preferred to minimize the filaments getting stuck.
This is the V2 version of SeanKFields Shore Trooper helmet. All credit for this model goes to him I merely chopped the files to fit my bed. The original files (including the armour) can be downloaded directly from…
Insert the tab into the notch to the bottom, then pull to secure closed. PLA, no supports. FreeCAD file included.
The original model was great, but designed for rear mounted spools. I rotated the Y part about 85 degrees to make this side mounted version. I only converted the Y_Splitter_PC4-M10_V2_rw.stl. Requirements: 3x PC4-M10 pneumatic connector,…
I created this simple PTFE cap in response to a question about air leaking into the AMS unit from my y-splitter ( Y-Splitter for the Bambu Lab X1C AMS ). While I haven't had any issues, it does raise a valid point if you are in a high…
Habe hinten 3 Aussparungen für Magnete 6x3mm hinzugefügt. Ausserdem die Bowden-Eingänge mit “AMS” und "EXT" beschriftet. Das ganze ist MMU und AMS tauglich. Kann also als Multimaterial-STL gedruckt werden. Remix von…
just a simple MC4 disconect tool Category: Tools
I printed with 0,4mm nozzle an 0,12mm layer height. Threads turn out nice. If want to do it even better adapt the layer height at the threaded area to 0,08mm. But as told it works nice with 0,12 as well. Hole for screw is 3D print…
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]](https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg)
![#0110 STRONG Round Split Key Ring [3 sizes] - Meets the Demands of Everyday Use!](https://media.printables.com/media/prints/649764/images/5140960_15cdce87-8223-450e-aa50-46aad106d16f_e6506626-dde5-4a1d-90d2-5199e5125402/20231118_174057.jpg)
