Stringing Test Prusa 3S
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
- Downloads
- 12,649
- Likes
- 962
- Rating
- 4.92
8,500 models
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
LED strip clip. Simple and works very well. Screws on one side only, so very compact. fits 10mm strips. Do not attempt to print on its side, screw will split the layers and crack the print….. I printed 24 of these all at once with no…
Stringing Test für PETG mit unterschiedlichen Temperaturen. Von unten 260°C bis 235°C
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
Remix of the popular mirage planter model by Teque5. Print without any supports, resolution 0.15 seemed to come out nicely. See my collection for other Counter-Strike maps, which are all scaled correctly. CS:GO Wall Art Maps Collection by…
Remix of the popular dust2 model by Frenzaih, updated to print better and (in my opinion) be slightly more accurate. Print without any supports, resolution 0.15 seemed to come out nicely. See my collection for other Counter-Strike maps,…
UPDATED → 20.02. 2022 Removed bottom text due to customer comment UPDATED → 13.04. 2021 Changes: Updated STL, 3MF and G-codes Thicker bottom Reduced overhang at the handle at the bottom Thicker walls due to waterproofness. Added version…
Another stringing test, prints fast, requires little filament. Prints in 10-15 minutes.
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Easy print for marking the stitches while knitting. The one who requested it finds it very useful :-) printed in PLA If you are interested in knitting, please have a look at my needle gauge 3D model. have fun see also blog post: Knitting…
Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…
Guitar string winder drill bit (standard 1/4 inch) for use with accu drills / screwdrivers. The included f3d file uses user parameters if you need to adjust anything.
Everyone's favorite Counter-Strike map de_mirage turned into a small succulent planter. This particular map version is from Global Offensive (CSGO). I really like admiring this from every angle, so I put the whole thing on a small…
Designed and successfully printed by a horse loving Year 7 high school student. Supports required under the chin of the horse. Magnet holes on the underside 20mm diameter.
If you're anything like me you bought a few wall hooks, used them once, and don't know what to do with all of the extra adhesive strips. This wall hook is designed to fit the small 3M Command strips and hide the pull tabs like the…
This is a fully printed and adjustable portafilter distributor for my Sage Barista Express machine, which uses a 54mm portafilter. You need to print it in .1 or less to get the threads working correctly. Use the step file and seperate the…
The F-15E Strike Eagle, designed by Mcdonnell Douglas, is a multirole strike fighter derived from the F-15 Eagle. it was made to carry out strikes (who could have guessed) deep in enemy territory without fighter escort. Both Sprue and…
Slides into an empty honeycomb cell from behind. Fits the “X-Large” size of command strips. Prints without support, obviously.
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags, etc. You'll need: 1x print included “Body” model 1x print included “Plunger” model 1x spring +-11mm long, +-7.5mm outer…
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Be sure to upload makes!
Philips Hue Lightstrips make good TV backlights, but I had trouble mounting them facing directly towards the wall and bending them downwards near the edge of the TV. This simple part helps to hold them in place and keep them flat, while…
Crucifixion in Retz, Lower Austria - 1727
Next time the drawstring comes out of your garment, instead of struggling to get it back in, print this model and easily fead it back through (almost like a giant needle!). This is very fast to print and uses very little filament. This…
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
This is a model of Luz's Palisman Stringbean from The Owl House with a collapsing staff. It is 83mm wide, 183mm long and 268mm tall. With the staff fully extended, it is about 1.4m tall. This remix is based on Stringbean Palisman - The…
Prusament PLA Galaxy Purple Fillamentum PLA Crystal Clear Smaragd Green Height: 270mm Staff Inset Diameter: 35mm Scale Accordingly No Supports Required Printed with 5% Infill
[update] I created a new version ( https://www.printables.com/model/663843-improved-harvestright-drain-hose-plug ) that helps maintain a good drainage angle better. You probably want that one. [/update] Didn't like the hose just resting…
A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.
Bookmark for How to train your dragon fans, it has the strike class logo on it which is the class Toothless is in
A replica of the TIE/sk Striker from Rogue One. It has movable print-in-place wings. The scale is at 1:270 with a length of 63.6mm and a wingspan of 43mm. (The hinges are 2mm in diameter.) Holder uses a small base and slanted pin from…
This is a remix of my own LED Strip Clip https://www.printables.com/model/68805-led-strip-clip This one allows you to mount two strips side by side with a single clip/screw. Great for the undeside of a lack table. Printing Print a few of…
The IKEA RIBBA frames included wall mounting hardware is about 1 inch deep set into the back of the frame, making traditional hanging with a screw difficult. To make it easier to mount IKEA RIBBA frames, and by extension, canvas prints, I…
UPDATE 22.2.2022: added lock with honeycomb protection agains fingers (kids friendly) - inspiration here Info: just like original (thanks for upload Mikolas Zuza!) added eyelet , so it can hang somewhere (like your neck for example) kids…
Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Was downscaled from N. The roof is an original design.
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
Klíč k napínání strun při jejich výměně. Makes the job of changing strings easy. I added a little glue to make it strong
V2 version adds possibility to mount two additional PowerCon outputs instead of third SchuKo-socket with adapter plate. *********************************************************************************************** Was in need of a…
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 52mm…
This is a remix of a string art design by 3DPrintBunny ; I have added the base with spiral pattern and hanging ‘notch’ on the back. I am including all files. However, I strongly recommend you do not change any print settings. They are 3D…
LED strip clip I wanted to have a minimal, very easy to print led clip (since original tape lasts 1 week..), so the design opted for a no support, no brim, perfect print, quick print and small filament requirements (< 1 gram). Sleek…
Hi all. Mine Nespresso C55 U-Milk failed due to failure in snaps of steam cover distributor spout. I modeled a new part and it fits and works perfectly. Original part is made from ABS but I printed it from PETG. Printing instructions:…
These are the details for perfect stringing models- Layer Height- 0.15mm First Layer height- 0.2mm Retraction distance - 8mm Retraction Speed - 30mm/s Print speed - up to 130mm/s
Warhammer 40,000: 11th Edition – 8" Deepstrike Gauge Stop second-guessing your reinforcements! This is a dedicated 8-inch measurement tool designed specifically for Deepstrike maneuvers in the upcoming 11th Edition of Warhammer 40,000 .…
McDonnell Douglas F-15 Strike Eagle Fighter Jet Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Print in place Droid that moves when you pull the bottom “zipper” This model prints in place and no assembly is required. You can also do a simple color change in a certain height to get a visually interesting effect and nice contrast.…
A small Hook for the small version of Tesa Power-Strips. Can be mounted horizontally or vertically. Can be used as a cable hook / under-desk hook as well.
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
LED strip mount to clip a light strip in a 45° angle. I designed it for a Philips Hue Lightstrip to be mounted behind a cabinet. The mount can be taped to an object, but in my case I decided to drill holes afterwards and mounted it with a…
A 13mm distributor with 4 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Plasticard Strip Cutter Filament: PLA Layer height: 0.15 mm Infill: 15% Supports under the block and under all nut gaps on the print plate Brim only required around the blade_cover By the way the 5H 48m time quoted above is for all the…
Just a simple bookmark 3 layers (of 0.2mm) thick with fantasy strings. Easy fast print. The central line is added for strength. The extra bulge (can be folded over with V1 and is present in fixed form in V2) is to prevent the bookmark…
A rather spectacular string-art star that may require some patience to get your settings dialled in, but is a pretty amazing print to behold when you are in The Zone. To help you get in The Zone I have included a single-layer…
A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Anyone with Thule WingBar will know how important the little filler pieces are to stop whistling. So when I needed to replace the lower cover strips on second hand Thule WingBars. Rather than purchasing replacements decided to 3D print…
Use this pair of brackets to mount a power strip or other accessories to the underside of your Uplift desk. It can be mounted to the desk frame crossbar's threaded holes with M8 x 10mm cap screws. The difference between the -1 and -2…
I saw Martin44's LED Bar which mounts into those mysterious hexagonal holes on top of the Z axis, but it's too big to fit on the MK3S buildplate as-is. I split it into three pieces - it fits on the Mini now - and added pin alignment holes…
This is a remix of the great design from Punkgeek. The length is reduced to 21,5cm to fit on a Prusa Mini plate. I left the angle to 30° but I changed the width to 10mm for my WS281x led strip. You can print 2 of them per side of the…
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
This is a remake of my 3 string instrument called the Triotune. It is very similar to a soprano ukulele, minus one string. This is designed to be modular, so you can swap out parts to fit your needs. There are three necks to choose from…
2 Part coffee funnel and distributor for Bialetti Mokka - NO SUPPORTS
Mit diesen Klemmen können 2 oder 3 Gardena Micro-Drip Verteilerrohre 4,6 mm (3/16") gebündelt werden. Das System sieht dadurch etwas besser aus. Translation: DeepL These clamps can be used to bundle 2 or 3 Gardena Micro-Drip distributor…
This is the ultimate stringing test V4.3, along with stringing it also tests for warping. It has poles of various lengths with diameter difference at the top and bottom. It is a very hard challange for a printer to complete but I have…
This ostrich sculpture captures the tall and elegant stance of the world’s largest bird. Ideal for collectors, nature-themed displays, and classrooms studying exotic wildlife. Printing : Suitable for FDM and resin printers Supports :…
This generator will make all common size elastic threaders (also known as tape threaders and bodkins). It will also make a drawstring threader for round cord. How to use the Generator You may customize just about every dimension to create…
I needed an under desk mount for my surge power strip and designed the clip to fit along the grooves with tension. The clips have holes for using small wood screws or you can use double-sided thin tape as needed for your own mounting…
Kleine Halteplatte für LED Streifen im 90 Grad Winkel
Get ready to meet your new best friend for soldering LED strips and/or wires! I had to find a suitable sidekick for my upcoming soldering marathon, so I printed and tested two models that seemed promising. But alas, they were too…
A perfect model to test your printers ability to properly retract filament, and test its bridging capabilities. This is done with two small towers either side causing the printer to have to travel across the middle on each layer. If the…
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
Update 2: Added multiple width files! print in 4mm, 6mm, or 8mm (or even 2mm but i havent tested this skinny yet) Update 1: Added a slot to put in a PET plastic protector. Just cut a piece of plastic from the bottle part you chopped off…
This cover is based on a newer version of the HEPA filter: https://help.printer-box.com/home/download/#elf_l1_UHJ1c2EtYm94L01vZHMvMDA1X0hFUEEtQ2FyYm9uIF9maWx0ZXI (the one on Printables is the old version) The height of the cover and the…
Design is at the end of video
Use one side as dispenser, the other is used as weight to ease the use. When one side is empty, simply turn the dispenser around to get wipes from the other bag! Printed it in PLA, though every material could fit.
Magnetic LED Strip Holder for Core ONE Enclosure (INDX Conversion) After converting my Core ONE to INDX, the enclosure became very dark, since the front LED strip is now covered/blocked rather than removed. To fix this, I designed a…
For easy power strip mounting while keeping access to all USB ports and power plugs. Modeled in Tinker CAD, I did manage to make the brackets just a bit taller than I needed to. I used a couple rubber dots on the pads of the power strip…
Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…
The number eight holds a special place across various cultures, symbolizing infinity, harmony, and balance. In Asian cultures, it is particularly auspicious, representing prosperity and good fortune. Drawing on these rich meanings, the…
This is a key for a Kohler generator enclosure, tested with model 14RCA . The original part is manufactured by Industrilas: Keys for insert 2-370 part number 291108 . I took measurements from the physical key and CAD file supplied by…
These Holders are for standart RGB-LED-Strip Remotes (94x52x8 mm) and another one that I use in the kitchen (90x40x8 mm). The approach was pretty straight forward: Minimum filament use For better appearence I chose to design them to be…
This zebra sculpture captures the unique beauty of its striped coat and elegant posture. Perfect for collectors, educators, or nature lovers looking to add a safari touch to their shelves. Printing : Suitable for both FDM and resin…
I made this model to secure our Philips Hue Festavia string lights to the top of our terrace fence. The top of the fence has the following dimensions: H: 4 cm (1.5748 in), W: 2.9 cm (1.14173 in). The fence also has a small 2mm indentation…
This is my power distribution box I used in my Ammo Box Battery project. The KiCad, gerber, flatcam, and gcode files are attached in case you want to make the PCB. Note it is made as a double sided PCB to ensure there is enough copper to…
This is a wall mount for vinyl records with led backlight. You Need: 3x: M3 Thread inserts : https://www.amazon.de/gp/product/B08BCSSKY1/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1v 3x: M3x10mm Screws 1x Arduino Nano:…
With this clamp I was able to attach a power strip to my desk. Now I have the switch in reach to cut the power when my devices are not in use. It is a lot easier to use my phone charger and to plug new devices in and unplug them. The…
I made a holder for my LED strips from BFT Lightning. In my case, it fits the 24V WS2814 RGBW LED strips with 60 LEDs/m and IP67. The LED tube sits fairly loosely in the holder, but it works well enough for my needs. The bar that holds…
A slatwall designed power strip mount which can be slided inwards and carry a powerstrip without restricting any access.
Simple zip tie cable mount to use with double sided tape or power strips to fixate cables.