9,017 models
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Edit 27. 12. 2023 Now you can also print a napkin holder with these gnomes! https://www.printables.com/cs/model/695300-napnik-holder-with-gnome Edit 10. 12. 2023 Thank you so much for all the downloads! I was so happy for the first 100 in…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The AMF files of the buildplates are included. The…
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The STL and AMF files are available for download on…
Hello, Today I have a Door stop for you. It works well and holds doors or windows really well. Ideal when it is drafty. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the links are here:…
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
I love these little boats! This time with dual drive! Now the boat goes much further, lasts longer and, above all, it finaly goes straight ahead! The drive spiral is made of PETG this time. This works much better than PLA. All parts are…
The Sunflower Windmill - Self adjusting Sunflower wind turbine Link to the Official Ball Bearing Mod Information about model maintenance: Due to the considerable administrative effort involved in managing models across different…
This is my version of a Window Stop. It works very well :) Second Version is thicker: 7mm thick arms each side and rounded corner :) Print instructions I print it with 15% infill, PETG
The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…
A vent to mount onto a window with a 100mm air duct adaptor. It can either be ‘hung’ from an airing window, or placed horizontally in a standard window. The vent area is ~62 cm², which is close to the adaptor/hose area of ~65 cm² (worst…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Tired of the wind slamming your PVC windows shut or swinging them wide open? This 3D Printed Window Keeper is a simple, highly functional wedge designed to sit securely near the hinge mechanism, keeping your window perfectly propped at a…
Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (…
Christmas Tree Window/Door Sign 2 Sign/decoration in the shape of a christmas tree for example, the door/front door or window. Dimensions: 132 x 170 x 4 mm --- Weihnachtsbaum-Fenster-/Türschild 2 Schild/Dekoration in Form eines…
This is a remix of Michael Fanta's original Gravity Spoolholder for MMU2S , which rolls the spool up a ramp while filament is being dispensed and takes up the slack when the filament is retracted by letting it roll back down the ramp.…
This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…
I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…
Sometimes you will lose or break a connector in your window blind chain. This simple project will fix it so you can enjoy a working blind chain again. It is designed for chains made of balls with diameter of 3,0-3,5mm.
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
I really liked the Windmill - 100% Printable and I also really liked the design of the Windmill Wind Turbine rotor So, I couldn't resist merging these two beautiful designs together Features Reuses original parts from both wind mills…
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
NEU: 10.06.2024: Die Dokumentation Issue 1 ist fertig. Auch als als zweisprachige formatierte offline PDF Dokumentation (WORD basiert) zum Downloaden This documentation is available for download here as bilingual formatted offline PDF…
Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…
Filament load/unload issues? MMU2 taking too much space? Not with this Sisyphus Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to almost three revolutions. Use two curved nuts to attach the spool to the…
I love wind spinners. I made this one of a Hummingbird collecting nectar from a flower to put in my garden. I have provided two models. The first one can be printed in white PETG and then colored with Sharpie color pens. The second model…
I love Wind Spinners. I've designed / 3D printed several. I saw this cardinal design on Amazon ( https://amzn.to/2RLLVHN ) and made it to be 3D printed and to fit on the Prusa i3 MK3 build plate. The design uses two opposing sets of…
Hello, here I have a functional wind turbine for you. There are 2 mounting options: *There is a hole at the bottom of the stator, into which a rod with a diameter of 10mm can be inserted. If the rod is slightly larger or smaller, it will…
Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…
I love Wind Spinners! I got some Blue ABS in the mail today. I like how the two winged cardinal came out, so I designed the body of a Blue Jay. I can't wait until my Prusa Multi-media adapter arrives. Then I can better color the wind…
I saw a youtube video from Rick Mayotte ( https://www.youtube.com/watch?v=GuEb3Y1t-BQ ) where he builds an old-fashioned Whirligig out of wood. I have been designing a variety of 3D printed Wind Spinners. I adapted his design and printed…
Yet another design of extruder indicator for Prusa printers. Pro tip: if the part stops rotating with the extruder glue a small piece of paper on the magnet (e.g. use a paper circle from puncher and a glue stick) to ensure friction…
Hier findet Ihr ein Modell eines 3-teiligen Luftkanals um den Schlauch einer mobilen Klimaanlage mit Außendurchmesser 150mm besser als mit der originalen Halterung an einem Dachfenster befestigen zu können. Der Kanal ist insgesamt 38cm…
This is a remix of my Turtle Wind Spinner. I love camping and made this evergreen tree and trailer wind spinner to display when I'm camping. The support rods are pretty flimsy for heavy winds. I found some 6mm carbon rods that are much…
Be kind this is my first post :) A print the scale 1 Category: Outdoor & Garden
Filament load/unload issues? MMU2 taking too much space? Not with this Sisyphus Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to almost three revolutions. Use two curved nuts to attach the spool to the…
Christmas Tree Window/Door Sign Sign/decoration in the shape of a christmas tree for example, the door/front door or window. Dimensions: 140 x 170 x 4 mm --- Weihnachtsbaum-Fenster-/Türschild Schild/Dekoration in Form eines…
Fan of this model? A Like and a Make would be more than appreciated! Simplify string changes with this Print-in-Place Guitar Pegwinder —a practical and efficient tool for both guitars and basses . Designed to be printed with organic…
Bracket for attaching a movable window sill to a window. This allows the window to be opened without removing items from the window sill. A wooden board is required, which is screwed between the two bracket angles. The design was inspired…
I've modified the frame, struts, and axle to simplify part count, printability, and assembly. Main axle and cross struts now all use the same piece, which clips into the frame. M3 bolts are no longer needed for assembly Axle clip is…
Several years ago I got my mom a Flying Pig Wind Spinner ( https://amzn.to/2RzyxGO ). The tough Ithaca NY weather has taken its toll. The fabric was ripped and three of the wings were gone. Originally I was going to just design/3D print…
Im Jahr 2021 begann ich mit dem Design und dem Bau meines Windrads, das ich im Laufe der Jahre angepasst habe. Die Explosionszeichnung zeigt die ursprüngliche Struktur, die auch die benötigten Einzelteile zeigt. Aber hier eine genaue…
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
Drainage cover for plastic windows and doors. First draft print (the included gcode) proved to be sufficient. The print using PLA is not as flexible as the original part, but it fits and looks good.
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
This is a replacement windshield washer fluid cap for a 2010 Land Rover LR2 (I haven't tested others but I expect it may fit other models). While filling up the windshield washer fluid one day, the cap popped off and was lost. No problem,…
I'm a bee keeper and love watching them go about their work. I also love Wind Spinners. So when the yellow ABS filament arrived, I knew what I had to do :-) The support rods are pretty flimsy for heavy winds. I found some 6mm carbon rods…
This handy cable organiser is perfect for travelling or when you are simply tired of constantly untangling cables. Strengths: sturdy design fits any cable (fits 2m long 4mm thick cables easily) Assembly instructions: insert cable in its…
You probably know the feeling... Your hands start to hurt when tensioning the sail and you have less grip than you would like. The trimming aid solves these problems in one fell swoop! The user-friendly design helps you to tighten the…
When need for manual rewind of tape
A rear window spacer for the Smart (453) and the Smart EQ Fortwo. It's used to keep the rear window open a little bit, perfect for summertime. I would only drive with it if it was an EQ model, otherwise exhaust fumes may get into the car.…
This is a remix based on the Complete IKEA Drybox Solution idea from crashdebug on thingiverse with some element ideas from Mihai's DryBox on thangs. All parts but roller_mount_inside and roller_mount_outside are done from scratch in…
Eine Halterung die an die Tür geschraubt werden kann um die Tür von außen entspannt zu zu ziehen.
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
Cute bird for window, wall or stencil art. More will come later… have fun and enjoy.
In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…
In prusa slicer I recommend turning on seam position to the rear (under layers and perimeters) when making a bunch of these keys. To me it looks more tidy than random seam breaks around the keys. For the top of the key turning on…
A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.
Void's case, just compatible with Typeractive's wireless 6 column MX Corne PCB layout.
When they insulated our panel house, they insulted us with one cover, so why not model it and print it out :).
Ein druckbarer Gabelkopf für kleine RC-Modelle. Möglich wird dieser Druck durch die neuen Organischen Stützstrukturen ab Prusa Slicer 2.6. Wichtig ist, dass er in der skizzierten Lage (Bilder, Code) ausgedruckt wird. PETG ist als Filment…
Are you as stupid as me, breaking your windshield fluid cap on your precious model 3? And you don't want to spend big bucks on a piece of plastic that costs less than a euro/dollar to produce? I broke mine, and I was quoted 100 euro for a…
Reduzierstück für eine Klimaanlage/Abluftschlauch von 150er Abluft auf 125er Flansch -kann aufgeschraubt werden -Meine Klimaanlage ist von COSTWAY ……gedruckt mit PLA im Quality Mode….. ……Organische Stützen…..
Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.
Battle of The AI Generated Algonquin Windego. Models received the same prompt, the same cleanup, and the relatively same amount of subdivision, displacement, and decimation in blender. They all needed a second fix in Ms3dbuilder, For…
Features Quick, easy print No support required Parametric design Positive ratchet winding Design The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm –…
The original window caps rotted away so I printed new ones with petg. The legs are 16mm apart and 5mm thick.
INSTRUKCE: LÍMEC ANO - NE PLA TISKOVY PROFIL 0,2MM KVALITA INSTRUCTION: COLLAR YES OR NO PLA PRINTED PROFILES 0.2MM QUALITY
Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…
This is just an experimental thing I came up with, because even with thin gloves, my thumb on the throttle soon got cold due to the wind in colder temperatures. So here is a thing you may want to try. It simply snaps on the standard 22mm…
Great original model by Whity . After printing the original version I decided to make a small modification. I moved the position of the upper suction cup mounts to allow for better viewing of the birds, and I made all the mounts a little…
Check out rest of my Easter decorations here --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and…
Windmill leaf with 2x2 lego brick at the end.
A snowflake which can be attached to a window with a suction cup.
sometimes this thing gets broken, so here's my print, it works well
Easy to print in PLA but PETG will work as well. I recommend to get two little longer M5 screws (pic No. 6) to mount the AirTag holder with the factory mounted plastic cover in between handlebar and windshield. It works with the original…
Fresh air scoop for piper aircraft like Cherokee or similar. borrowed from thing verse.
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: ….I used David Glaze 's Silent Auto-Rewinding Gravity Spoolholder (reworked Michal Fanta 's original Gravity…
Change strings on your ukulele faster and easier. Internal dimensions for the tuning peg are 9x19 mm - will fit most ukulele brands. Only 10 grams of filament. Designed as print in place, prints as 1 piece, no assembly needed. Just…
This version of the top plate increases the space to pass swatches in the top plate and moves the position of the top open yarn hole. The old position caused the yarn to get hooked onto the wheel screws if the tension was a little lower.…
This is the simplest and easiest to print adapter for re-spooling filament on an empty spool. You will need: - 2 pcs of this print - 1 M6 x 80 or M6 x 100 mm screw (lenght is not crucial - it has to be around 20-30 mm longer than the…
Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.
I've shortened the end caps for the repwinder. For the locking screw version, I removed the ratchet as that should only be needed on one side. I then shortened it by 0.8mm. For the other end, I also shortened it by 1mm, and left an indent…
This is just a simple remake of the official support. One of mine melted due to extreme heatwave and the second one broke on a bump. Decided to design them in Fusion360. I made them a bit thicker. 5mm instead of the default 3mm. Added a…
Students create different prototypes of a bird feeder and discuss their models and printed results. Students combine 3D printed parts with wood, plexiglas and plastic trash.
I equipped the wind turbine with 686zz ball bearings and slightly enlarged the holes in the black part of the flower to improve printability.
Town token in Spirit Island board game.
BOM: Printed with ROSA3D High Speed PLA Signal Violet A tough, reinforced ice scraper designed specifically for car windshields . The geometry focuses on durability, comfortable handling, and reliable performance in freezing conditions.…
I love Wind Spinners! I've designed and 3D printed quite a few. Sue and I recently converted a RAM Promaster Van into an RV. I thought I would make a wind spinner to mount on top of the van when we were camping :-) Here are some of the…
This little logbook winder will take up no room in your Geocaching grab bag or makes a great gift or tradable item. Being very small. it is ideal for nano logbooks but as a result the forks are a bit delicate so care should be taken when…
This is a snap together design to print your own window grid. Parts are divided to easily fit on your printer bed. Use the parameters to configure to match your window size. I originally designed this to make window frames for my tardis.…
a simple fan duct designed for 120mm computer fans. This housing allows for ventilation through narrow slot type windows often found in high rise buildings. This is a great tool for removing smoke or fumes in a building with slot type…
I love Wind Spinners and thought I would design one for the Winter Season. "Frosty the Snowman" came on the radio... so that gave me the idea :-) Parts used: Prusament PETG ( https://shop.prusa3d.com/en/23-pet ) Overture PETG (…
remove ice without removing gloves, ergonomic design for a comfortable grip and double face to scrape or break ice from car windscreen and more
Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…
![Air Duct Window Vent [r.4]](https://media.printables.com/media/prints/7b76bdf0-c1e5-4156-b510-bb3d0fd1fa5a/images/10171299_74288e78-5b67-42f2-bd07-d947e7bf40cc_5b25485a-2bff-4670-907c-d16bb9518486/air_duct_100mm_window_exhaust_-_duct_adaptor_2025-jul-06_05-16-24pm-000_customizedview14193478432.png)
