3,010 models
A tiny haul truck commonly used in open pit mining. Movable wheels and bed, designed to be printed all together. UPDATE: I would suggest printing this model at 2x scale. The fine details print much better and so far my son hasn't broken…
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
This is a sphere printed in two parts with a threaded connector to attach each piece. Its design allows printing without supports, which gives a nicer finished look to the part. You can also mix and match colours! Use a dab of super glue…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
After I finished the Simple Perfect Desktop Fan Stand I wanted to make one that is adjustable. So here it is. Features No Supports / Super easy print The angle locks every 5 degrees Customizable text at the front No additional hardware…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
Updates 23-03-04 Radius measurement was incorrect due to incorrect application of the ‘decorative’ edge. Resulting in a 0.7mm radius measurement error. This has now been corrected Increased size of text slightly on the joining ledge to…
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for PETGSource material: PET
Silenziatore modulare studiato per essere un silenziatore effettivo con 7 dissipatori di suono. Rende il suono emesso di fronte alla replica pesantemente otturato, trasformando gli acuti e i suoni alti in bassi. soprattutto è grosso e…
Print approx. €6.60–€8.07 excl. taxPreliminary estimate for PETGSource material: PET
Fusion360 was too complicated, so I had to use PrusaSlicer's modifiers for the screw holes. Modifiers only export with .3mf, so just drag and drop the .3mf into PrusaSlicer. I'm not sure if this works with other slicers. Set infill to 0%.…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
A very helpful tool to make a lot of bobbles. It is no longer necessary to make them with cardboard, you only could use once. I've uploaded all parts as a single file and one file with all part. This bobble maker is a little bit bigger…
Print approx. €2.72–€3.33 excl. taxPreliminary estimate for one variant
Pipe clip Ø 16 / 20 / 25 / 32 / 40mm, Double - Clips Fissatubo Aperto Doppio For fast installation of RNC, flexible & rigid conduit Suitable for: x2 Ø 16mm x2 Ø 20mm x2 Ø 25mm x2 Ø 32mm x2 Ø 40mm Resize to adjust dimension All our designs…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
riduttori di suono… semplici, leggeri, rapidi nella stampa, efficaci nel ridurre il suono emesso dalla tua ASG all'interno di APOLLO 40mm vanno inseriti 7 riduttori di suono. buon divertimento. MATERIALE: ECO-SMART PRINTOLOGIST
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for PETGSource material: PET
June26 re-design note. @s0ren reported that in his print of the 8 can holder, he had problems removing cans (removal aperture not high enough). He had printed in PLA, I had printed in PETG, perhaps there was a difference in shrinkage…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for PETGSource material: PET
Endcaps for 40mm aluminium profiles. 40x40 40x80 40x120 40x160 80x80 80x120 If you like the print profiles, please consider rating them. Thanks :-)
Print approx. €4.20–€5.14 excl. taxPreliminary estimate for PETGSource material: PET
DESCRIPTION: This is my take on replacing a stock fan with a 40mm one, making the printer a lot quieter. The difference from other models is that it does not take stock 25mm fan screws but slides over the heat sink and that allows it to…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Full-face dust masks are very expensive but full-face military surplus masks are quite cheap. So I made adapter from NATO 40mm x 1/7 (gas mask standard thread) to Secura filter connector. Secura is polish local brand of safty equipment.…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
PCIe bracket for your PC case to mount a 140mm FAN to cool down your PCIe expansion cards.
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for PETGSource material: PET
I looked around for a 40mm blastgate design to use in a dust extraction system. I found a couple but all of them were pretty big and stuck out from the pipe a fair distance, they also required alot of hardware to make them work. I made…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Minimal design for a silent hot-end fan: Smaller 40mm fan base and re-enforcement for screws. Maximize air flow for cooling - No grill and adapter air outlet matches E3D air inlet. Thicker base for better Prusa mount. Fits Original Prusa…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
The stock fan on the M5 is a 30mm (24v) fan. Mine died after just a few days I replaced it with a larger WINSINN 40mm (24v) ball bearing fan WINSIN 40mm 24v Fan - Amazon This is the same brand as the stock 30mm fan WINSIN 30mm 24v Fan -…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Remix for the Silica gel spool container from gdrag. https://www.prusaprinters.org/de/prints/65922-silica-gel-spool-container I realy like his design, It looks cool, is easy to print and fits nicely into a 750g / 800g spool (his 50mm…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Single hook fits aluminum frames with a 40 x 40 mm, 10 mm T-slot. The test lead folder is placed in the slot and then rotated to hold. It can be made without support if it is printed horizontally.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
A small cable channel/raceway 18mm x 16mm used to hide and run a few small cables on the side of my lack enclosure. You can change the height once you drop it into your slicing software. You can also combine a bunch of these to make one…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
This is a remix of ctheroux's excellent Orange Pi 3 LTS Case, which I really liked but thought could use a little flavor. I changed the size of the fan to 40mm to fit the fans I had on hand, and rounded off the edges and added a cute…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter which allows you to connect a supplemental fan to your Stern Pinball machine power supply fan to prevent the smaller, much noisier fan from spinning up. The larger fan mounted above should prevent the smaller fan from…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
Replacement male side-release buckle for Quechua/Decathlon backpacks with a 40mm belt. This specific buckle was found on a “Quechua Bionassay 22” backpack, but will likely fit several other backpacks using the same design. The code on the…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…
Print approx. €3.78–€4.61 excl. taxPreliminary estimate for one variant
Thanks to gurnarok to supply STEP files for his model, I was able to alter the holes in the bottom to accommodate M3 threaded inserts and add a hole in the top for a 40mm fan.
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Lamellenstopfen als Abdeckung für ein 40mm x 40mm in 3mm Stärke Formrohr. Ich habe dies in PLA gedruckt und funktioniert einwandfrei. Standard Slicereinstellungen 0,2 mm und 15% infill.
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
This adapter is used to connect a Motorhome 40mm outlet to a corrugated pipe to release grey water waste. This is needed when no drive over drain exists at a campsite. Designed in Fusion 360 file included should you wish to change the…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
We needed a holder for the communion candle from our son we saw some online but i thought “hey, i can print that on my own” i found no design that i liked, so i made one on my own it is designed to fit 40mm candles but you can scale it to…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
This model is a sort of cartoon caricature of a jet engine made for mounting a 140mm fan inside. I had a spare fan around an so printed this to make use of it. I think it looks pretty cool myself, but most of the time the user is looking…
Print approx. €8.95–€10.94 excl. taxPreliminary estimate for PETGSource material: PET
Loved the HACKADAY Skull Logo Fan by bfesser …But always felt it was to Flat. Also love the HACKADAY Badge by Devlin …for dimensionality. Decided to merge the two and tweek the overall design to have a bit more dimension - but serve the…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
This Autism Awareness keychain features the iconic 4 puzzle pieces , symbolizing the diversity of the autism spectrum. Perfect for anyone who wants to show their support for autism awareness, it's easy to print and great for everyday use,…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Are you tired of getting those pesky fingers caught on fan blades? Want an easy way to prevent that whit out requiring any tools or hardware? Introducing the AMAZING SNAP ON FAN COVERS!!!!!!! Just print them SNAP them and BADABING…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
I recently purchased a Burris droptine rimfire scope and found that the magnification ring was extremely hard to turn. Decided to Design my own throw lever rather than pay $30 and get one that only hopefully works. Uses an M2 nut which is…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
An adaptor/connector for 140mm fans to 4 inch - 6inch corrugated flexible ducting The base design uses M4 hardware for connection to a 140mm fan. The magnetic version uses 10mm x 3mm disc magnets in the base. Versions for 8mm and ½ inch…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for PETGSource material: PET
0,6 mm thick cover for 40 mm fan. Print instructions Category: 3D Printer Parts Summary 0,6 mm thick cover for 40 mm fan. Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0,1 Infill: 100%
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
Designed this endcap for PVC tubes to transport posters & D&D maps. Take any old PVC tube, cut it to your desired length, and put these caps on each end! This model is designed for 40mm outer diameter tubes, but you can always just scale…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Simple plate exposing all DE10 Nano connectors for easy access. Specifically designed to fit a a Noctua NF-A4x10 PWM on my MiSTer Mini-ITX Ironclad Plus setup inside a Morex Mini-ITX 557D case, using the included standoffs. Fan screw…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Con este diseño se busca dar uso a ventiladores que fueron o van a ser desechados por tener las helices rotas, con este metodo tambien reciclaremos dichos elementos para usos alternativos ahorrando dinero y reutilizando elementos que no…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Here is my custom made easy to print Chiptray for 39-40mm Chips. The Chiptray can hold over 150 Chips and has markings for every 10 chip stack. If you are interested in different versions or just like the model please let me know in the…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Some versions of the Makita DUB186 blower come with just the short nozzle. This model allows connecting 40mm drain pipes to create a long nozzle to blow away grass etc. Nozzle is designed to have roughly same cross-section as the original…
Print approx. €2.26–€2.77 excl. taxPreliminary estimate for PETGSource material: PET
It seems “normal” radius gauges only go up to 15mm - that is too small for some of the stuff I do.
Print approx. €1.63–€2.00 excl. taxPreliminary estimate for one variant
This is a remix adjusted for using the 80x70x40mm mirrors from AliExpress Mirrors https://www.aliexpress.com/item/1005003118017119.html (2 packages / 80x70x40 gold variant) Printing instructions You can either use the pre-sliced .gcode…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
Made to make a build easier in a first attempt into the world of fabricating build steel tubing. 90 mm to 140 mm OD tube/pipe Lightning infill for speed - it will be quite soft and will split if squeezed too much, I had no reason for…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for PETGSource material: PET
Simple case for 140mm fan. Used "dust filter" on photo is https://www.printables.com/cs/model/309273-140-mm-fan-dust-filter . Case height is set for using “dust filter”. It can be easily changed in f3d file.
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
I added a scandoubler to my Amiga 1200 which, as usual, sits over the Lisa (and Alice) chips. After the machine was one for a long-ish period of time, I saw graphical glitching and drop outs. It turned out the Lisa chip was getting a bit…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Those tube rings are specifically made for my Hand made Telescope which was missing Tube rings. As a way to mount hings to it, I decided to use countersank M6 bolts. Those are slightly to small for the bolts themselves which is…
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for PETGSource material: PET
I made this case because I wanted simple design with 40mm fan that I would like. Please note that this assembly requires: 20mm long M3 screws or similar 40mm fan with screws and with correct connectors. Gluing if you use transparent LED…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
A simple system for tightly locking together a mitre cut frame before screwing or nailing or for holding while glue sets. Uses two strops in photos but can be done with one long one. Can be heavy on pla but they hold quite a heavy load.
Print approx. €18.80–€22.98 excl. taxPreliminary estimate for one variant
Two versions of the cooling shroud for my MI100 GPU in my server. Supports recommended but not needed for the power connector tunnel. Recommended printing with 40mm holes facing the buildplate.
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for PETGSource material: PET
A mount which will let you attach a Raspberry Pi Camera to 40mm Fan Spacing, you can share the same screws with a fan if they are long enough. I couldn't find a similar mount so I decided to go ahead and try to make my own with Fusion360…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Hello, Today I have for you Anycubic Kobra S1 top cover elevation 40mm . It is suitable for increasing the space for cables and bowden. The elevation is precise and fits beautifully. The side panels can be opened to vent hot air. The logo…
Print approx. €7.81–€9.55 excl. taxPreliminary estimate for one variant
Analog zu meinen anderen Teleskopschellen eine Variante für Tubi mit 140mm Durchmesser. Außerdem zwei angepaßte Varianten für meinen Motorfokus, mit entsprechendem Absatz und Aussparung.
Print approx. €5.94–€7.26 excl. taxPreliminary estimate for one variant
So I am new to Fusion360 and made an improved version of my Raspberry Pi Camera mount! This Camera specifically is; Waveshare - RPi Camera (B) - OV5647 This mount uses two 40mm fan spacing screw points. I made this to match the 40mm fan…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
I really liked the Fume Extractor from arbys_workshop . However, I wanted to be able to use both 120mm and 140mm fans. Parts used: 4mm banana socket black https://www.tme.com/us/en-us/details/d-3231/4mm-banana-sockets/ 4mm banana socket…
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for PETGSource material: PET
I was very happy with the upgrade parts provided by WICKID for the E3Dv6 Hotend, but soon the fan started to make a terrible noise and finally gave up. Smaller fans have a tendency to wear out fast. I decided to replace it with a 40x40mm…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
Intricate 40mm Bitcoin for use with 6x3mm or 12x3mm magnets. Can use an M600 colour change at layer 50. Based on the Bitcoin with circuit diagram design that is common. Circuit diagram generated by AI and chopped up by me, so this is an…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
I’ve seen that Solar System Lithophane Planet Lamp Collection by @FritzPeppone is lacking my favorite moon so I decided to add one. Moon is roughly 140mm so it’s compatible with Prusa mini and Bambu Lab A1 mini. BTW this model got M75x4…
Print approx. €6.37–€7.79 excl. taxPreliminary estimate for one variant
Adds a mount for a drag chain for the Lowrider V4. Available in two heights for 1" and one height for 40mm. Requires "Lowrider 4 V4 Core Accessory V Slot" 40mm drag chain mount made to fit Doug Joseph's…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Cover for Alluminium Profile Size 40x40mm
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
This is a logo fan cover to fit a 140mm fan. I had to rebuild a PC at the height of COVID and the only CPU cooler I could get didn't fit in the case (which is an expensive custom audio tower) so I uhh did the ugly thing. It's fussy as…
Print approx. €6.12–€7.48 excl. taxPreliminary estimate for PETGSource material: PET
Running a Raspberry Pi on a PoE+ hat means that a 25mm fan is kept running to cool the system. The fan is PWM controlled by hardware (which is great) but because it's tiny it doesn't shift much air and it's quite noisy. So I modelled a…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Einfacher Haken 40mm für Skadis Board
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
ZWO EAF bracket for the Lunt 40mm solar telescope. I got tired of manually adjusting the focus, so I designed this bracket to fit a EAF. I used 7/8 inch ¼-20 bolts to attach this to the vixen rail that comes with the scope. I cut a custom…
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for PETGSource material: PET
A simple adapter for a flush fit between Xiaomi HEPA Filters for Mi Air Purifiers and Arctics excellent BioniX P140 Fan
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
A quick 40mm remix of the Prusa mini power adapter holder by Skov Knudsen Inventions with an added cutout. I use these to mount my power strip under my IKEA LACK Prusa Mini enclosure. It may not be the absolute perfect solution for my…
Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant
Designed to keep sharp edges of furniture from scraping the floor. It has a 4mm deep pocket with 1mm clearance around for the leg to sit in. This should scale to fit most other size applications. I use three perimeter walls and 80% infill…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
This is a case to hold the RaspberryPi 3B+ along with a 30mm or 40mm fan, and can be mounted to the Prusa Mk3 frame, or can just sit somewhere. It has been designed to accommodate the Noctua 40x40mm fan (which is silent compared to other…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
I needed a Shell/Stand for the Raspberry Pi Touch Display so I decided to make this on Fusion360. This stand fits the Raspberry Pi 3 or Raspberry Pi 4 as they have the same mounting holes. You use the screws included with the Raspberry Pi…
Print approx. €7.06–€8.63 excl. taxPreliminary estimate for one variant
Laboratory stand for 40mL vials (cca 27.4 mm diameter), for use in ultrasonic bath. Printed from PETG, 0.4 mm nozzle, 0.2 mm layer height, no supports. Print 1x top, 1x middle (top and middle are identical), 1x bottom and 12 feet.…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
This model is a replacement clamp for speaker stands. The upper diameter is 50mm. The lower diameter is 45mm. The print needs supports!!!
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for PETGSource material: PET
Bohrschablone 140mm PC Luefter fuer DIY Projekt - Virtueller Pinball (VPin) Für meinen Virtuellen Pinball (Flipper) habe ich 140mm PC Lüfter verbaut. Abmessungen: 140mm x 140mm Da dies ja PC Standards sind, können Sie auch auf andere…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Key differences: Lamp Shade- 1.25x size, supports BR30 E26 bulbs, 40mm socket. Simplified base. Printed in vase mode Lamp Base- Taller, 40mm socket, cable cutout, added a base for the base Still uses the same connectors from the original…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Deutsche Beschreibung - s. u. Splitter to connect two devices or extraction points to one vacuum. I use it on my workbench for the router and the circular saw for extraction at the cut and under the table. The tool connections have a…
Print approx. €4.18–€5.10 excl. taxPreliminary estimate for one variant
The fan mount was designed to solve the issue of insufficient air conditioning and the need for cooling on hot days. Its minimalist design is all that's necessary for the fan to operate effectively. To secure the fan, you can use either…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Mesh used is 0.2mm thick PET plastic mesh harvested from reusable Billa fruit bags. Flange for the fan is sort of delicate and supports can be hard to remove from there.
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PLA with variable layer height. Happy Printing!
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Simple Baoding Balls (40mm Diameter) with a holder, and no supports needed.
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for PETGSource material: PET
A 140mm fan nozzle for 100mm tubing for running ducting in my case for a cold pc intake fan, printed in pla
Print approx. €3.26–€3.98 excl. taxPreliminary estimate for one variant
Made specifically for the YuanLey YS25-0402P 4 port 2.5g ethernet switch with 2x SFP+ ports and POE. Attaches with m3 screws to existing holes. Works with any 40mm fan. I am using a Noctua NF-A4x10 12v fan with a 5v usb to 12v fan header…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
EN : Some time ago I was looking for a box for my needle files and found a nice model from Clivebradshaw and remixed it with an label in 4 languages , see:…
Print approx. €3.97–€4.86 excl. taxPreliminary estimate for one variant
This is to connect 4 inch dust hose to shop-vac hose 40 mm refurbishes This connect to Bosh sander 6 inch. See picture for the way i print it. made in PETG
Print approx. €8.26–€10.09 excl. taxPreliminary estimate for PETGSource material: PET
I made this model to get the 40mm fan pointed up away from the build plate to stop the draft on thin models and finnicky filament. It offsets to the left to clear the z screw and home correctly. I printed with an mk3s plus using organic…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant
The model contains a 5mm spacer for 2 80mm Fans and the attachment for the 240mm radiotor. I used this model to cover up the fans https://www.printables.com/de/model/373460-hexagon-fan-cover-80mm-120mm-140mm/comments/1557508
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
40 to 60 mm visual guide design to make it easier to 3D model and design your creations without the need for digital calipers !
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
None of the chopsticks holders I found on Printables were large enough to hold my gargantuan 330mm chopsticks, so I made one. It's a simple box with a fillet on all edges, but it fits nicely in my cutlery drawer.
Print approx. €6.86–€8.39 excl. taxPreliminary estimate for one variant
Compliment your rugged PC build with textured fan side clips. I used silk PLA to give a metalic effect. I have included models for 120mm and 140mm fans. Printing I used 0.15mm layers for a clean texture. 0.20mm would look similar and save…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Podstavec hranatý 40mm pro minerály, acháty (agate and minerals) S okénkem pro popisek
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Ring to re-enforce the lip of a 240mL tetrapak carton.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
a meme in a high school
Print approx. €4.38–€5.36 excl. taxPreliminary estimate for one variant
This is a fan guard for core one+ extruder 40mm fan. Print setting: nozzle diameter 0.4mm , layer height 0.2mm, material PETG
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I've created a low-profile bracket for this annoying 25mm fan. This is the second version of the bracket. I'm sharing the model now because I finally received new fans and was able to properly test its performance and it works as…
Update: 26/04/2024: Added a STEP file as much requested. Kirby sucks So do fume extractors Its kinda a no brainer Almost entierly printed aside from the filter and fan Update 1: I forgot to mention, some models of fan will requite around…
Grenade Launcher Airsoft Used screw: 3x25 for body 3X 3x15 for pistol grip 2X 3x10 for RIS rails 4X Used spring: D/d = 8/0.8 mm L=10mm or similar 3D printing settings Plate1: 0,2 mm layer 8 walls 30% infill no supports Plate 2: same as…
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
Pipe clip - Conduit Clips - B Type - Ø 16 / 20 / 25 / 32 / 40mm - Clip Fissatubo Aperto For quick installation of: RNC conduits Flexible & rigid tubing Available for the following diameters: Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 40mm Features: 🟢…
The Manticore is (to my knowledge) the first shell-ejecting blowback 40mm launcher in the world. It uses HPA to cycle short 40mm grenades (shells shorter than 90mm), and fires in semi-auto. I recommend printing all of the parts for this…
These fan spacers can be used for 120mm and 140mm computer fans. Both fan size spacers come in three thicknesses: 10mm, 15mm and 25mm. The mounting holes are chamfered on one side and recessed on the other. See the second image for the…
