Counting matching models…
18/08/2022 step file uploaded New face fan cover 13/05/2022 V6/ REVO V6 heat set inserts added 1 st Big Thanks to EVA designer for this big effort and nice design for EVA 3.0 Link to EVA 3.0 HERE ! 2 version Standard E3D V6 / REVO V6…
Bambu Hotends Box with different Trays This is a small, nice looking box for storing 4 assembled Bambu hotends and some additional tools. It was designed for X1 Carbon hotends, but it should work with P1P ones too. Features: Stores up to…
Monolith's design, but with hotend space.
Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…
Description Fully tested scratch design inspired by the Sherpa mini -inspired design! This extruder replaces the stock centauri carbon extruder and allows use of a Bambu Lab clone hotends with swappable nozzles (commonly sold as TZ2.0,…
Model used to test different slicer settings relating to Vertical Seams, Z Seam etc.
Based on the work of Tom Wilkie (see https://www.prusaprinters.org/de/prints/31006-prusa-mini-v6-hotend-adapter ), I adapted the design with reinforcements for the hex nut holes, a sturdier, better printable cooling air duct and a more…
Adjusted the outside dimensions and added 3x3 bases on the bottom. There is also an untested model that makes this stackable, though harder to get at the parts. If you're using clickfinity, I recommend not using PLA as it will creep over…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I used Filip's Template to create a 2x3 gridfinity holder…
I needed a nozzle mount for my ADXL345 sensor and my bambulab-style nozzles. All models I found are for the V6 nozzles so I made one. I printed the part in ABS with Voron settings and the magic 5 (5 walls, 5 top/bottom layers and 55%…
Remix of stew675 's beacon bracket, added air duct for stock and Phaetus Conch hotends M3 nuts (fan mount ) and m3 inserts or m3 square nuts (beacon mount ) required to make it work Normal supports needed , all print settings and material…
A simple and perfect box to contain two mk4 hotend assemblies. I personally prefer to use socks on my hotends so this project is just the right size for them. However, I also attach the step and f3d files to allow you to make any type of…
First of all, many thanks to “TurtleMasterFlex” from the OrcaSlicer Discord for lending their airflow and design expertise to help with the redesign of this model. All credit to them for putting in the majority of, and most significant…
Updated 12 July 2023: Added a space for a 1.5mm Allen Key (used for filament cutter handle release) Added a groove next to the Allen keys and the Nozzle cleaner needle to make it easier to remove the required tool. Added 4 deferent magnet…
This toolhead is designed for the Anycubic Kossel Plus (Linear or Pulley) 3D printer but it can easyly be adapted for other models of Kossel. It brings support for E3D 's hotends V6 and VOLCANO . It also fix the problem with Anycubic…
Still a W.I.P - Image expected very soon So far I've done the 235 degree duct only and plan on doing the 360 degree as well. If I get requests for the other ducts I'll give them a go as well :)
Inset for this box: https://www.printables.com/de/model/488705-bambu-hotends-box-with-different-trays This is a litlte inset for my hotends box to fit hotends without a fan. Fits in every slot and with and without TPU sock. If you print…
Simple Remix for my Biqu H2 with a volcano hotend, was very easy to edit thanks to his .step file. V5 has airflow a bit more downwards and the back side has more space so it shouldn't melt as easily, V6 uses screws because the clips break…
I've designed an adapter to use BambuLabs-Style Hotends in an Raise3D Pro3. If you're asking “but why” would someone use cheap hotend or even clones in a so “expensive” Maschine like the Pro3. Simply said, it works (much) better than the…
Yet another storage bin for Bambu Labs hotends made for Gridfinity system. I needed to store my assemblies and spare hotends together and could not find anything matching, so I made one. The models provided are for specific layer height,…
I had heard that the Xmax3 are the same size as the Plus4 and are swappable (with some changes to the plug) (reports are the q1pro hotends are the same length as the plus4) Later on I heard that it is 4mm short. So I Stewy helped me with…
I started this after I printed the bottom tray for Bambu Hotends Box with different Trays (and before I read the comments with a couple comments and solutions for inserts LOL).…
added a bit of clearance for the bolts on the E34M1 hotend mount, as i had to break off a smidge on my print of the original added the slots for some vertical adjustment Print either as provided with supports, or with the toolhead-side…
This is a mod of the reindeer fanshroud to enable use of volcano length hotends like the K1 ceramic heater hotend. It could also work with other, not as long but longer than stock hotends, I haven't tested that though. I modded the…
If you have Hotends without fan, you can use this Inlay for better hold Printed in Bambu PLA Silver. 0.16 mm layer height. If you like this upgrade, please leave a like for the “Bambu Hotends Box”…
Hi, Before I switched over to XOL, I was using nozzlecam in SB and I was more than happy with it, so wanted to keep that feature with XOL, however haven't found ready made mounts. My CAD skills aren't great, but it fits & works. All is…
Updates: 12-NOV-2025: added m3 and m3 heatset versions of the front face, to help our poor IS graphs with a third mounting point for the fan cages. Standard voron-style short heatsets, 4.22mm holes for 4.5mm inserts. For the final public…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I was asked if I could create a hotend holder similar to my…
This is a Prusa Bear compatible mount for Mosquito hotends when using the official Orbiter v2.0 extruder. I have also added a 17.5mm PTFE cutting jig with a 45 degree bevel to fit the metal exit of the Orbiter better. This mount uses the…
This is a remix of the great design of Stefan from CNC Kitchen. Please check it out and also his Youtube Video where he explains everything in great detail. There are two main modifications: The casting process can be much much simpler…
I have designed a toolbox for Hotends with fan and the matching hex key because I couldn’t find a model that met my requirements. It features “only” three Hotends instead of the four commonly found in other models. With one Hotend…
My model offers 2 holes for Aliexpress hotends, 1 hole for stock, 1 hole for Conch. Of course stock fits any hole from this range, but may wobble too much. Also I made the embossed texts more shallow. Better split the model to print…
Hotend holder for standard and ceramic hotends for Anycubic Kobra S1. Hold hotends with silicone cover. Has holes in bottom, so nozzles look through. Can be mounted with double-sided tape to door of Kobra S1 or to HWS with M4 screw (holes…
Simple rapidburner mount for ridgid cartographer probe. you need no special parts for this. Offsets are: x_offset: 0 y_offset: 28
This is a 0 Y-Offset probe mount for Sprite extruder. You can only fit this with extended hotends. I have only tested this with TriangleLabs CHCB-OT hotend and it works perfectly. If you have genuine CR Touch or BL touch, get a 10mm…
Remixed mount to have camera lower
I made a MOD to mount the VOV0 printhead on a MGN9 rail in the VORON V0.1 There are two files included. The shorter one has more clearance on the backside.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Best printed as oriented in the STL file. No support needed.
Tested, removed large chunk of fan support to make room for nozzle The 2510 fan needs its holes to be enlarged to 3mm and you need two 2.5 mm heat inserts and then screw the fan down from "outside". There are two versions for the now…
Reverse bowden side-entry mount for direct drive hotends on Creality bed slingers. After switching to DD I wanted to be able to draw filament from the side like I did before converting. The mount this is based on seemed like it would fit…
This is the water cooling setup I use in my CorEssentials BETA for the E3D Chimera Aqua. Obviously this will fit most other printers. You can find out more about the machine on GITHUB: https://github.com/MacNite/CorEssentials To built…
Remixed BLTouch/CRTouch mount to accommodate UHF-like hotends for the FrankEnstein V2 Toolhead. Lowered mount by 17mm. Used in conjunction with these ducts designed by wight554 and FrankEnstein V2 Dragon hotend mount for my Dragon UHF.…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Best printed as oriented in the STL file. No support needed.
Dragon Burner Toolhead Parts for MadMax Toolchanger A collection of parts for dragon Burner toolheads being used in MadMax toolchangers. I've included the parts that I've been working on to help convert my RigidBot CoreXY to a MadMax…
This is the 3D printed PLA 4 perimeters, 20% infill, workholder we used with the nomad carbide milling vice. as seen in this video by yours truly:
For my FF Dreamer I needed a sock for the right and a sock for the left hotend which are mirrored. The wedged slots in the socks were not needed for my hotends. So I made a remix without the slots and with a mirrored version. The original…
micromake part cooling fan for long hotends Print with brims No rafts required 0.2 mm layer 40-60 mm/s 10-15 % infill Category: 3D Printer Parts
Very simple part that you glue in to the bottom of the box so that when the hotends are put into the storage container the cables don't move around and get trapped and damaged.
Hi! I'm sharing a remix of the XOL Monolith Carriage here. I really liked how the belt attachment is implemented in the original model. However, after printing the model, I noticed that I couldn't use the X-axis endstop without an…
Lid for the @Mandog_899163 Prusa MK4 Hotends box without text.
This design will no longer be maintained, as a new version and total redesign has been created now - it can be used, but may not be reliable or even work at all. I am keeping this up for other people to be able to use or modify, as it can…
Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…
Description Fully tested scratch design inspired by the Sherpa mini -inspired design! This extruder replaces the stock centauri carbon extruder and allows use of a Bambu Lab clone hotends with swappable nozzles (commonly sold as TZ2.0,…
Lid for the @Mandog_899163 Prusa MK4 Hotends box without text.
Very simple part that you glue in to the bottom of the box so that when the hotends are put into the storage container the cables don't move around and get trapped and damaged.
Tested, removed large chunk of fan support to make room for nozzle The 2510 fan needs its holes to be enlarged to 3mm and you need two 2.5 mm heat inserts and then screw the fan down from "outside". There are two versions for the now…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I used Filip's Template to create a 2x3 gridfinity holder…
This is a quick and simple Drawer Remix for the Gen2 Slim Drawers to fit the Hotends and Nozzles For kobra 2 series printers
As the issues have come with the qidi plus 4 hotend and since open market hasnt offered any alternatives some great modders out there have starting to create adapters and alternatives, based on their ideas i wanted to contribute my own…
I use a Panda Revo for a year now inside my X-Max 3. However, while the Bambulab and Qidi use quite simular hotends, they do not fit exactly. So I had to do some filing and drilling to do it. After I discovered the model I remixed here, I…
Remix of edmars hotend holder to fit six hotend assemblies and print without supports. You need to download the labels from the original model here: https://www.printables.com/model/792420-mk4-hotend-holder-support-honeycomb-storage-wall-s
Hotend mounted ADXL345 for Bambulab X1 type hotend, It should be compatible with TZ v6, BBL X1/P1. You need to remove silicon sock to use it. Bill of material Qty Hardware Note 1 M3x10 BHCS 2 M2x8 self tapping screw for plastic 2x2mm ID2…
Download here: https://www.makeronline.com/en/user/personalInfo/dd565a79-10a5-4186-bbff-42fed784c7bf.html Description Organize your workshop and protect your spare parts with this professional mounting system, specifically designed for…
For the rod between the hinges, simply take a piece of filament and push it through the holes (see the last picture). For more cool stuff, check out my channel: https://www.printables.com/@FirstLayerDesign have fun !
This model shortens the molds length by 3mm, the original doesnt fit the heater block for my project so i modified it to fit. The vertical screw hole was removed because i honestly cant be bothered to change it, and the short side of the…
Update 10/26/21: Added duct base for Ender 5 version Rigid mounting adapters for Triangle Labs Dragon/ Phaetus Dragonfly hotends and Manta MK2 Fan Duct system. Advantages over the standard v6 grove mount: Higher acceleration values…
If you have Hotends with changeable nozzles, you can store them in this tray. Printed in Bambu PLA Silver. 0.16 mm layer height. Without supports. If the holes are to small, turn on “X-Y hole compensation” with 0,1 - 0,2 mm. If you like…
EDIT: See the newer design here with a filament sensor if you are comfortable with re-printing the Orbiter housing: https://www.prusaprinters.org/prints/68432-compact-orbiter-extruder-and-filament-sensor-for-p This is quick remix of my…
Mit der Zeit haben sich bei mir immer mehr Hotends für meinen P1S angesammelt, daruter auch einige “V2” mit austauschbaren Düsen. Ich habe mir zusätzlich mehrere Heater/Thermistor-Kombis und Hotend-Lüfter gekauft. Soweit möglich, baue ich…
Holder for your hotends for Bambulab. This holder is designed for be used on Ikea Skådis wall mount. Printed using 0.2mm layers. PLA.
increased stock fan ducts by 10mm to fit my nf crazy dragon
Inserts for Bambulab hotends. Fits the P1 and X1 hotends. There is an insert for hotend with nozzle and one for the complete hotend.
![Bambu Lab Complete Hotend Box X1/P1 [3x Hotends Bundle]](https://media.printables.com/media/prints/1228610/images/9212117_8addbd02-5988-4dd4-a09a-747a4beeb043_88644365-c469-4437-b202-7e2840da5c36/img_8079.png)
