Counting matching models…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
This foamer uses the Venturi effect as an injection method, no pressurized systems Gardena-compatible hose connector Interchangeable screw-on nozzles: spray, jet, foam, and fan(only the foam nozzle works at high pressure with the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I have made an extruding nozzle sculpture/trophy/award. There are three pieces to this model: The base, which has no special printing recommendations. The extrusion pile, which should be printed with supports on overhangs greater than 70°…
Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
The nozzle on the air freshener at work was missing so I did a quick design and print for a replacement one. It's not the most beautiful design, but it works well and I feel no reason at this time to make an improved version. I used…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
The included nozzle for my 2.25" Shop Vac has never been “just right” for vacuuming out a vehicle. It’s also been a little too narrow for my needs. I've been using it mainly for cleaning up my pellet grill, so I was in need of a “clean”…
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
I needed a smaller version, so I shrank Reven’s Nozzle Box a bit. The hinges have been reinforced, making it suitable for printing at 0.25 or 0.30 mm layer height. It still delivers that satisfying click when closing. If you’d like to…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
A simple holder to store the CORE One nozzle replacement tool as well as a nozzle wrench! (Fits both the “No sock” and “Sock” versions of the CORE One nozzle replacement tool) Attaches to a IKEA Skadis pegboard or to anything…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Do you want a Bambu lab x1 Carbon with ams or just another 3d printer? Print this for your girlfriend or wife for valentine and let them see what you can do with an extra 3d printer. Since I don’t have a girlfriend neither a wife I just…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Some people may not realize but the bed level test calibration that comes with the printer is only supposed to be used with 0.4mm nozzle. Other sized nozzles the recommended is to print a square/rectangle with half the diameter of the…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Have you misplaced your silicone nozzle cap? Maybe you just didn't get it in the package (like in my case)? Well, here you go! It's the perfect length and taper for the nozzle. The threads are modeled so it screws on and off easily! It's…
E3D Revo nozzle holder. It can hold up to 6 nozzles. Enjoy! Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15%
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
A simple remix into a “coin” shape of Ceji3D 's Demon Slayer visualizer model. The model has been scaled up in size from the original, and the text/elements rearranged within so that they stack on top of the "coin" to allow multicolor…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
If you like my work and would like to see more, please consider buying me a coffee I needed a bottle for wood glue and I needed something cost effective. buying bottles specifically for decanting wood glue, wrecking the bottle with glue…
The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET
A completely revised version of my popular Makita nozzle attachment. The printing time has been reduced and the accuracy of fit has been adjusted. The new shape improves the airflow and the fan doesn't have as much back pressure. This…
Print approx. €1.44–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
Standard silicone cartridge nozzles are too wasteful for my taste - you have to push out a great volume of material to fill them and get it going out of the nozzle. Also, there's never one around when you need it, because they're…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Printer Nozzle Torque Wrench designed by Anders Olssen. Not only for ruby nozzle:-) *update 17.9.2022: Added the correct PETG GCode-Files
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
This is the gcode for a temperature tower for the original Prusa MK4 with Input Shaper firmware. 0.2mm SPEED stock profile 0.4mm nozzle verbose gcode on your printer must have input shaper firmware and enabled.
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Here's my design of a Prusa XL Nozzle Scrubber / Brush. There are tools for correct assembly, brush holder and filament collector. Drawn in Fusion 360 Print instructions ¤ Remenber to use tree support on Brush holder ¤ Use .3mf or .gcode…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Remix of Martin Moores Bullet Bill / Banzai Bill model to store 19 E3D V6 / Volcano nozzles. You can customize your Bullet Bill to store everything you want. Theres a magnetic and a screw version available. Nozzles are locked in place by…
Print approx. €2.41–€2.94 excl. taxPreliminary estimate for one variant
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
This is a compact and efficient vacuum cleaner nozzle, designed with a focus on versatility and convenience. This Model is available in 3 different lengths. 100mm, 150mm and 200mm. Every Version features a 20mm x 100mm opening at the top,…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
Some people may not realize but the bed level test calibration that comes with the printer is only supposed to be used with 0.4mm nozzle. Other sized nozzles the recommended is to print a square/rectangle with half the diameter of the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Inlet Nozzle for LAY-Z-SPA connector (post 2019) that diverts the water flow to the side. This is just a re-upload of the original creation of CoquetTech which I found on thangs.com and want to use as a base for Remixes but it is not my…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for PETGSource material: PET
I created the Henry replacement nut (see here) out of necessity, and now I am doing the same with the other end of the hose! This is designed to work with the standard hoses Numatic supply (32mm), and standard poles and accessories. In…
Print approx. €4.42–€5.40 excl. taxPreliminary estimate for PETGSource material: PET
Update Versions - “No Magnet - 10mm magnet - 10mm magnet Version 2 - 12mm magnet” Holds the heat block in position vertically and horizontally - files (four versions) can be modified to allow for varying magnet sizes. Small magnets may…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
This remixes the original nozzle holder in an Altoids tin (as supplied by E3D when you buy their Pro or Fun packs). This is 2.4mm shorter than the original, as I found that I could not close the tin, and the nozzles would dent the top of…
This package contains a fully redesigned purge bin (trash tray) and reinforced nozzle wiper for the Prusa Core One L. Although inspired by existing community models, this is not a minor modification but a complete rebuild from scratch. No…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
I subtracted the chamfer of Mike Ant's module from FluffyBunny's model. Now it works for an extruder with a sock and nests neatly inside IBNobody's MK4 Nextruder Nozzle Change Heater Block Clamp. I'm sorry it looks that way.
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
Pas de support. Remplissage 100 %. 0.15 mm. Prusament PETG Clear.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Nozzle holder for the Prusa XL with packaging. Since I really liked the packaging tubes on the nextruder nozzles, I wanted to have a place to put the nozzles in their packaging onto the Prusa XL. This holder still allows you to read the…
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…
Print approx. €11.13–€13.61 excl. taxPreliminary estimate for PETGSource material: PET
Simple cap that fits at the top of the Z-Axis hex hole. I only have 3 different nozzles, and having it displayed on my printer helps me remember which one is installed. This is made for the right side Z-Axis. If anyone would like one on…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the remix of the remix of the original - using the lift away nozzle holder and bucket inside the bucket - but going back to the original 6x3 magnets, which is what I had since they're used on all the other Voron stuff.…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
These holders hang from the XL's side extrusions to store your extra Nextruder nozzles. When the nozzle is in an extruder, the holder becomes a label that clips on to the extruder to remind you which nozzle is currently in use. The .3mf…
Print approx. €3.74–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
this is my model of the feyenoord logo. i made some changes so you can print it with 1 nozzle. if you print this in prusa slicer and make color changes on high you can print full color with 1 nozzle. tips for the slicer. 0,2 mm the width…
Print approx. €8.49–€10.38 excl. taxPreliminary estimate for one variant
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
I've designed this custom nozzle to clean medium-sized surfaces like desks and drawers without using the large “mop style” rotating brush used for the floor. It works also great to clean car seats and large surfaces. I've printed my in…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
A simple nozzle tray to hold the .25, .4, and .8 MK4 nozzles. Optimized to attach with M3x8 screws on the left side in the original PRUSA enclosure. Printed upside down with 0.4 nozzle PETG on the textured metal sheet of a MK4. See GCODE…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
Having seen several adapters throughout the major 3d model sites I wasn't sure they would fit for my older model Stick Vac and Standup. I am new to the 3D printing world and am reintroducing myself back into 3D design as its been awhile.…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for one variant
This nozzle can be used with the Novritsch Anti-Fog unit (using 9mm tubing) and Wiley X glasses using comm temples. Comm temples can be recognized by their thin layout, suitable for use with over ear headset. The nozzle inlet is oriented…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Just a simple box to keep your E3D V6 Nozzles safe and sorted :=) Has 4 sections, for .25, .4, .6 and .8 nozzles. Printing Print with .4 nozzle, .2 layer height. No supports are needed! Assembly Use some filament (1.75mm), PETG or PLA,…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
Core One Purge Bin with Nozzle Wiper Clearance Remix - 6x2MM Embedded Magnets. No glue needed due to layer pause.
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
Nozzle Box for EVO nozzles. Made in PETG. Storage space for 7 Nozzles.
Print approx. €2.54–€3.10 excl. taxPreliminary estimate for PETGSource material: PET
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Reverse engineered the original design so a STEP file is added.
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
Introduction (English / French / Italiano) EN: The locking button on a few accessories of my (great) Dyson Vacuum cleaner had broken and could not buy it as a single spare part. I also lost my nozzle head for corners and tight spots….. I…
To mount the cool 3D4U by Miele Borehole Cleaning Aid to an Electrolux vacuum cleaner with a special non-round-shape tube, you need a 34mm tube adapter. There are some designs available, but not one fitted good enough for me. So I created…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
Fogger nozzle expander
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Tool changer that works with my uploaded fan shroud - https://www.printables.com/model/465185-prusa-mk4-fan-draft-shroud
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
A useful end to get into tight spaces, print as many extensions to make it as long as you want. Great for sideboard, side of fridges, tight spaces… There are 2 parts, the base and the extenders. The Extenders push on and twist to lock on.…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
The model is designed for the Electrolux BEAM central vacuum cleaner, although it is likely to also fit various models of other vacuum cleaner brands. I am also attaching a drawing with detailed dimensions, which should dispel any doubts…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
vacuum cleaner nozzle thin and long
Keep Your Nozzles Organized with Style! 🌟 Discover my ingenious design for your Prusa printer equipped with the Nextruder! This sleek holder stores your nozzles in their original boxes, while also categorizing them by diameter with clear…
Print approx. €11.23–€13.72 excl. taxPreliminary estimate for one variant
A simple easy nozzle to dust things off with. much smaller and simpler than a blowgun. Just hold your thumb on the nozzle tip to shut off the air. (obviously this only works up to a certain psi) but I found it very useful for typical…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
The Nextruder Nozzle Wrench and Nextruder Heater Block Clamp are the most important combination of tools IMHO if you intend to regularly swap nozzles on your Mk4. So, I made this 1x2x4 gridfinity bin to keep them close by your printer.…
Print instructions Printer Brand: Prusa Printer: Prusa MK3S+ Rafts: No Supports: Yes Infill: 15% Layer height: 0.20mm Filament: Any (PLA may warp under heavy load)
Print approx. €2.28–€2.78 excl. taxPreliminary estimate for one variant
Summary This is a nozzle wiper for the Prusa CORE One which mounts to the gantry. This allows for wiping the nozzle at any point during a print. The installation is toolless and easily reversable. This was inspired by the Nozzle Wiper V2…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Basically I could not find a nozzle box that was EXACTLY what I wanted. So I decided to make my own. Very quick and easy to print. I just put a colour change at layer 61.
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
A frame-mounted Revo Nozzle holder for Prusa i3 Series printers using E3D's Revo Six HotEnd . Compatible with Prusa's MMU2S — the holder nestles underneath the MMU, leaving space on the frame on either side of the MMU open for additional…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for PETGSource material: PET
The only change I made from the standard 0.2mm structural profile was to increase the perimeters to 3 to give more support to the screws. Line up the T-slot nuts within 1-2mm of their holes before installing. Screw each in loosely so you…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
Some people may not realize but the bed level test calibration that comes with the printer is only supposed to be used with 0.4mm nozzle. Other sized nozzles the recommended is to print a square/rectangle with half the diameter of the…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
There are some designs available, but not one fitted good enough for me. So I created my own, including a release mechanism, like the original Electrolux parts have. You will need the following to put the model parts together A ballpoint…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for PETGSource material: PET
M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate M140 S[bed_temperature_initial_layer_single] ;Set final bed temperature G28 ;Home all axes G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up M104 S[nozzle_temperature_initial_layer]…
Been searching for a nozzle wiper mount to add to my Voron Trident. It seems there are my models for the Voron 2.4 but only limited options for the Trident. so I came up with this. It is mountable on the bed extrusion using 3 M5x12 from…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
Original Dyson part number 906960-11 Does it differ from the original? Yes, although it's functionally the same. I haven't added those weird ovals around the outlet. I don't think they add much to structural strength. Underside brush is…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for one variant
found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
I made this to mount a 5.5mm endoscope on to my extruder and make a nozzle cam controlled by Raspberry Pi and Octoprint. This rear mounted design is the easiest to install and has the best cable management. Basically it just adds another…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
My friend enjoys using his humidifier, but due to its placement, he needs the mist to be directed at a different angle than what the included parts allow. This replacement mist nozzle is designed to push the mist output slightly further…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Nextruder Nozzle Holder with box, up to 7 Nozzles MK4_Nextruder_Nozzle_Holder_v2.obj: The column in the middle is ~10mm higher
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Nozzle for sawdust extraction. Designed for a 100mm hose. Print instructions No supports needed. Tested with PETG Brim 5mm Resolution 0.2 mm Infill 20%
Print approx. €14.30–€17.48 excl. taxPreliminary estimate for PETGSource material: PET
Update: there is this improved Version of my model . I found the HiRes nozzlecam by 3DO with 4K resolution and a high quality Sony video chip on the web. A nice improvement over the standard endoscope type nozzle cams you find on Amazon…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
I needed a safer storage for my spare nozzles so i made this to replace the plastic bag the spare nozzle came in. This is for a single nozzle which i prefer over boxes with multiple nozzles in my sparepart kit. Easy print, text can also…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Two parts that are remix of two distinct designs to fit a "chinese" mellow fly adxl345 to your V6 nozzle and prusa bed. I personally re-designed them for an “aliexpress” mellow fly pcb and for my prusa mk3 (but it should work for any V6…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
Made for Prusa MK4 and Prusa XL but fits with every E3D nozzle. You can use it with the Prusa Nozzle Replacement Tools. No supports needed.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Kurzes Rohr mit Düse zum Abtrocknen von Autos - Mit Bumper um nicht versehentlich den Lack zu zerkratzen. Wird wie das Original mit der roten Taste verriegelt. Es gibt jeweils Dateien für einen 2 color Druck als auch einfarbig. Der Bumper…
Print approx. €7.13–€8.72 excl. taxPreliminary estimate for PETGSource material: PET
Organize up to 8 V6 nozzles with this fast-printing gridfinity-compatible nozzle box, then get back to printing! Total print time is around 40-50 min. Inner organizer The organizer insert is especially designed to print in vase mode,…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This is a holder for the second nozzle that comes with the HAZET 2162M grease gun. If you, like me, don't know where to put it this comes in handy. The nozzle is secured by a tight fit that wraps around the thread by more than 180°.…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
The first two times I tried to use this tool it became stuck onto my tool head so stiffly that I had to rip apart the model to get it off. This could be because I was using a fairly stiff/tough PLA, but regardless of the reason it was…
UPDATE : just made a new version with other adjustments. Now the cam is a little more in a back position than before. _________________________________ Hi all, I couldn't find a proper Pi camera mount with a real nozzle view so i made one…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for PETGSource material: PET
A nozzle at your disposal anytime you need
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
EN: Printed PET-G into a nightmare, after heating the nozzle, some of the material sags and you have to pick it up with tweezers - so it doesn't get under the print. I haven't found any holder that fits me and that would be universal, so…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
I recently upgraded my former model of the gorgeous 3DO HiRes Nozzlecam with Sony video chip . These are the improvements (Updated once more 15.04.2023): Changed camera angle to center nozzle in picture Better lighting with brighter 3W…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Simple and fast printing way to mount a aithinker esp32-cam to the side of a anycubic kobra2 print head. No disassembly required. Angle of cam is pretty good, lighting is a bit shit, but adding reflective tape inside the “light guide”…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
EN Keep your Nextruder nozzles organized in a clean and compact print-in-place storage box. The box contains slanted slots for easy removal of nozzles and a system of removable labels indicating the diameter and type of nozzle. Includes…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Single or Dual-color nozzle size label for Original Prusa Enclosure and Prusa XL 1 a 2 extruder printer. For a perfect look and blend with the cover, I recommend printing in the color combination of Prusa Galaxy Black and Prusa Orange.…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
When looking for a sleek, simple, logically way of storing Nextruder nozzles many of the printables are so close to fit my desire for what i'm looking for. That was: no chance of flying nozzles when bumping into them when they are hanging…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
Prusa mini+ Kalibrace první vrstvy pro trysku 0.25 Filament PETG First layer - test Nozzle 0.25 Layer 0.15
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
The Delta-P Duct is an awesome concept. While there are already designs for fitting an endoscope camera, I wanted a system where the camera could be easily removed without disturbing the extruder cooling and restore the excellent view of…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
This is my first ever design! I would get frustrated trying to use the flimsy piece of tape used to secure the nozzle for spraycans over and over; it gets dirty and loses its adhesiveness and eventually the nozzle can come loose and get…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Description: I needed a storage solution for 1 extra Nextruder hotend and something to store spare/different Nextruder Nozzles. So I remixed the model of Relive93 to store 1 Hotend and 4 Nextruder Nozzles on a Skadis pegboard. Print…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
A shortened version of Luboš Šakal 's Nozzle Holder. Sits in the aluminum extrusion track.
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
