Counting matching models…
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
Labubu Mini - This model is shrunken down to 2/3rds of the original size. Plus I added the option for a keychain. The body can be printed without any supports. I did add a brim to make sure it doesn't tip while printing. Options include…
Soda can opener with option to use as lid for bee and other Insects, will also reduce spillage if tip over. How to use it: Open soda can Insert the soda can tap into hole in front Pull up to open the soda can Push it down to lock it on…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Galaxy S24, S24 Plus, FE and Ultra cases, to be printed in TPU of your choice. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones. edit on 12 Oct 2024: Added Galaxy S24 FE case. Added…
Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…
Print as the attached .3mf files (for 0.6mm nozzle) to get the best strength for the parts. The filler block should be adjusted to match your door, and can be left away of course if there is no height difference. In my case the height was…
Also available on MakerWorld! Model 41379. Come join the party! UPDATE November 27, 2025: I have confirmed that scaling the model to 129% on X works for H2C build plates. Scale it before rotating it to fit. You can also just use the same…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…
A new low profile version #2 incoming soon with better LED placement and more versatile printing with customization options coming very soon Slider version now live and available Test prints have been successful and are now good to go. If…
Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
This is a remix of the Articulated Ice Dragon by p1lotz . In the original upload, the last segment and the tailpiece were slightly stuck together. This version fixes that, and I also added a version with no arms and Low-Poly versions: The…
A straight designed tray with three compartments. Ideal for snacks... The standard dimensions are 200mm x 60mm. It can be scaled as desired. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+…
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
03-01-2023 small update Added some pictured to display that Watch holders are optional and some of the assembly. ----------------------------------------------------------------------------------------------------- Drawing inspiration…
I like my jumper cables to have a tight fit, so i adjusted the lenghts and turned it into a single print object. The Skadis hooks can be pushed into the dovetail connection, but be carefull when inserting them, because it is a very tight…
Prints as 2 separate pieces that press-fit together. Take note of which base to use. One of them has a slot for a gift card and the other does not. The assembled height is about 10.5cm (4") tall. The base is 4cmx4cm or 1.5"x1.5" The…
Similiar to MetalheadPrinting's “ Gengar (no watermark) ”, this is a clean version of Anthonylu's Gengar model they made on thingiverse . However my version still offers the three piece print assembly and the detailing on the eye and…
Remix of Motor Fidget by Mars3D with more cylinders. The higher cylinder counts may require more play to get free and some lubrication.
This is just a tiny little model for the Option Plate Mod of the 🥰 BoxTurtle's rear skirt. It accommodates a CNLINKO LP-12 💪 connector, e.g. to connect both CAN and 24V. Additionally, the design incorporates a dedicated cable outlet for…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. If you find these for sale on Amazon , Etsy or anywhere else, they are…
This is the PERFECT Gloomhaven / Frosthaven / Jaws of the Lion standee! You can print this and rush to show it off to your wife, which will undoubtedly raise an eyebrow at your excitement, in complete disbelief at how great your next…
This is a fully customizable magnetic screw tray. It is designed to use any common round/cylindrical neodymium magnet. Compartment size is fully configurable You can have it separated in as many compartments as you like. You can have 1,2…
Back Left Mount v2: includes 2 different options for mounting. (updated 11/29/2023) One with larger holes for M3 heated inserts. One with smaller holes for a through bolt to add a locknut. Can be used with or without a strain relief. Back…
Here is Winchester Action leaver Toy Gun. Do check the components work for you as was a suspended project. Print instructions Category: 3D Printing
You may also be interested in my Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides - plus ¼"…
This is a motherboard tray to fit a standard ATX motherboard. The optional card support bracket screws into the side with two to eight M3x12 screws depending on how secure you want the bracket. The motherboard is mounted down with four…
This is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional). I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter. To assemble…
Let me introduce you to my minimal-assembly collapsible lightsaber with a lever lock. Not including the blades, the hilt only uses 3 parts! The blade is interchangeable to be any color you like, and you can add the dual lightsaber mods to…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Warning These files has many parts and take time to load and slice. I have attempted to make it as easy as possible to lay out and print. Options No slider guide Inner slider guide Outer slider guide The engineering squire guide positions…
Update (27 March 2025) - Uploaded a new thread only (no sides) universal spool holder axel at a user's request. This allows you to use two female ends and adjust to any size needed. See the "Drybox Axel - 50mm Universal Threaded (Male,…
Happy Halloween! 🎃👻🍬 I created these candy bucket earrings for my wife last year, and her friends all wanted a pair too. Now I'm sharing them with you all! These are guaranteed to each hold at least one m&m! (Disclaimer: all guarantees…
You can find the main body here: https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage/ Here you will find different variations of the drawers for the CFS riser. You will need to print 2x Drawer I want to…
Introduction A selection of remixed focuser options for Hadley , all designed from scratch with 45deg threads and 3mm pitch for vastly improved printability and operation. Mostly remixes of Hadley focusers that are out there in the wild,…
Give your bathroom sink a clean and modern look with this practical soap dish for standard soap bars. The raised radial ribs keep the soap above collected water and allow air to circulate underneath, helping the soap dry more quickly…
There are a few options with this one, mainly due to requests and iterations. there is an option with and without the hinge. there is a v1 and a v2 of each as I didn't like the wobble on the plates. and there is also an option to have one…
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version ( Cults3D ). Added a new option with hole for HDD. External HDD max dimension (LxWxH): N/A…
Mount for the BigTreeTech Octopus V1.1 board using a DIN rail. Options for 92mm and 120mm fan. Prints without supports. Printed in PETG at layer height 0.2mm. I mountend the Octopus with M3 brass standoffs. Fan Mounts are designed for M3…
Update 25.07.2026 I've added stands of varying depths, from 2 to 12 cards. There's also a version with the Super Famicom logo. ___________________ Hello Everyone, At the request of two users I have prepared 3 new game stands for the NES,…
Important Note: I cant add a second model for the sources. Ill try again later but for the meantime know that the base model came from here: https://www.patreon.com/posts/cod-mw-2-2022-74410404 I have added a third lens like several other…
Update 11/22/25: Adjusted blade pocket size of 65 degrees version from 15 to 14 mm, avoid filament not getting cut properly. A long time ago I discovered pomi's filament cutter but wouldn't want to use it without a box a la wapameeto's .…
Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 120mm computer fan, this versatile device is perfect for keeping you cool or for fume extraction during soldering and…
EDIT: 1/12/2026 - After printing the original file from @JakJak I found the tolerances on the dongle slot version were way too tight for my dongle. Maybe my printer isn't tuned and maybe the 2C controller dongle is a different size.…
The already amazing spine by edl had oval “heads” and some range of motion limited by lines. I wanted to make the balls spherical, increase the range of motion, and provide some directional and sizing options for the spine. This…
It's a floppy ghost for all your fidgeting needs! If you don't have an AMS or similar multi-color system, you can still print it in all white and will look beautiful! Printing Instructions: The 3mf file provided was created using Bambu…
Hi I've taken what I can from the original files and converted them as best I can to a possible prinatble file. Hopefully there is something in amongst this model that will help you with your project. As always check the sizing suits your…
Customizable Couch Armrest Table with optional Tablet Holder First and foremost, this is an armrest table for various sizes and shapes of couch armrests. On top of that, I found it appealing to attach things to my sofa. So, with the…
This model inherits the characteristics of PsychProd's original model: Fast print speed due to the clever basket design, great air permeability, and the option to add space for a hygrometer. In-spool locking: The one thing that bothered…
This fidget clicker is a neat little gadget showcasing the power of print-in-place mechanisms. Choose between three detent strength options. Simply print the desired model, break it free from the bed and with minimal cleaning up, its…
Two different options for displaying challenge coins. The first is a tall vertical stand. You will need supports when printing the middle flat, or you can stand it on end and print without supports. The second is a small desktop display.…
This is a motherboard tray to fit a microATX motherboard. The optional card support bracket screws into the side with two to five M3x12 screws depending on how secure you want the bracket. The motherboard is mounted down with four M3x6 or…
Double Helix AAA Battery Holder - with optional extra compartment This is a fun little print that not only looks neat but holds up your AAA batterys. There are two different versions, one has some extra storage for batterys inside the…
This is a fast and easy to print case for a RPi 4. The cover simply snaps-in making it simple to access the board. It is compatible with all versions of Raspberry Pi 4. If desired, you can add : 4 screws (M2.5 x 5) to secure the board.…
Check out my new Toy Switchblade design here . This is a revised version of my first balisong design. This new design is balanced better for flipping, very durable, and easier to print. There are also many options for customization. There…
…Please be sure to hit like & post a make, I'd love to see your prints! MACROS AVAILABLE HERE…! https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/ EDIT: ADDED SILICONE MOUDLE for use with silicone pads, including the one…
I've had numerious requests to see if I'd have a go at a StormTrooper Helmet. I'm still learning day by day so decided to have a go. It wast that easy and I'd used the help of other models availble here, but I believe I've come up with a…
Here is Noob Saibot Mortal Kombat Mask. There are just 2 options. Print instructions Category: 3D Printing
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version ( Cults3D ). Added a new option with hole for HDD. Fixed the wrong model in the files.…
After a request to do the Armour, I couldnt help but admire how cool the gun was used by McCree in the game Overwatch. I've tried different variations in uploads here incase you want to try different printing methods, but just note the…
Added a magnet hole, 6mm diameter, 2mm depth. The hole is not fully 2mm so magnet will be a bit above the surface, but still it is staying firm on the fridge, so it will be always close to your cans. With a drop of super glue you can…
This pencil uses a hidden compliant mechanism to hold the lead securely. The biggest design challenge was getting enough grip to hold the pencil lead in place when writing Custom Name You can add your own name easily, or maybe your…
Hey Dan, sorry it took so long : ) Just wading through my requests where I can. I tried pulling the first helmet from my orriginal upload and it was very difficuilt and not the best outcome, but I uploaded it here any way. I then found a…
This caddy is perfect for those backyard cookouts or any informal dining table. Holds ample amounts of cutlery, napkins and condiments/seasonings. Two sizes 180x180 and 210x220. Will easily rotate on a hard surface, but optional rotating…
Hi Jason, This is the only examples I have. I was going to make holes in the shell but though printing it would require more unecessary support, so opted out to just drill them in afterwards once printed. I've compiled 2 - 3 different eye…
Please consider leaving a like. or just take it and slink quietly out the side door. NOTE:- If you intend to keep the rubber strip that is already affixed to the printer frame (where the glass rests normally), then fitting the shallow…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…
Fits Snapmaker A250T and A350T. Check the images to see if your 3D printer tool head looks the same. Instructions: This page is for the multi duct part cooling fan adapter and spool holder parts. The Snapmaker A250T and A350T are…
May I present the arch villain to all of your heroes, the bad guy dressed in black. NEMESIS! Enjoy! edit: New inductive probe version & heat insert version included for E3DV6 systems. NOTE a firmware change is required to use the…
For the rest of my SKADIS things look HERE UPDATE: Added a version with 110cm internal width. I wanted a slim container for some tools on my IKEA SKADIS, So I made a box aproximatly 70x40mm inside. with 2mm walls. This uses the universal…
Drill Powered Outboard (Work in Progress) https://youtu.be/Ix5F3YQOyLg Assembly requirements: Print 1x Propeller of your choice There is an edgeless propeller (prefix WIP), but it is an untested work in progress and requires two M10 nuts…
Update 2 I added a version for cartridges with a transparent cases. The version for 7 cartridges with cases has the same depth as the one for 10 cartridges without cases. The version for 10 cartridges with cases is deeper than the version…
The 270 degree hinges these new pins were designed for are here :- 270 Degree Geared Hinges for K1/K1 Max/K1C. Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen…
A simple and satisfying gear fidget toy with an optional piece to add a clicking noise. The small T-shaped piece can be left out if you wish to have a more silent fidgeting experience. There's 3 different gears to choose from, each has…
Some-thing to safely wall mount my spare Milwaukee M12 Charger using command strips in a more convenient location. And more options for mounting on various surfaces. Note: Using a minimum of 5 perimeters seems to get the best transition…
Horizontal 1U Rackmount for ZimaBoard with support for between zero and two, 7mm high SSD. If installing 2 x 7mm this will take the overall height over the 1U height (44.5mm) to around 51mm. The rack mounting holes are designed for M6…
Hi Ryan, Here are two very clean cut model cowl versions of the black panther, but hopefully the Neckless and Claw will be ideal for you and your sons project, Please double check the sizing, as I try to generally make it round medium to…
Patch Notes: January 11 2025: Comfort ring + Other comfort fixes January 20 2025: Optional keychain hole + Minor fixes January 21 2025: Anti-Wobble Caps Silent Fidget: 4-in-1 Design (requires 2 bearings) A 4-in-1 quiet fidget that is…
This is only compatible with the K1 (not the Max). The main goal of this mount is to have some protection over the motherboard if you're using your printer without the bottom panel. And if you install this mod you will no longer be able…
This is a case for the R36S retro game console. I added a compartment in the bottom part for accessories like USB cabel and MicroSD cards. There are also two slots for an USB WIFI adapter and USB-C to USB-A OTG adaptor. You can choose if…
It's a very simple spool wall mount. Insert a PTFE tube into the hole on the front and push it to the very end, then cut off the excess. Spools glide really good and self-center. The optional guide is printed in one piece. You need to…
A stash container fit for a king! This oversized chess piece isn't just for show. It has a small hidden compartment too. You can also print this without the stash compartment. I printed mine with .20 layer height up to the crown. Around…
This lovely ring rests on your index finger as you perform your various crafting tasks. When you need to increment the counter, simply slide your thumb over. Can be used for a variety of counting purposes, but for the yarn crafters out…
Hi Anthony, Hopefully these will work a treat, As always please check the sizing suits your needs. I look forward to some pics of your project if you do take the challenge on ; ) Cheers Jace Eys removed now : )
I originally found this model for free somewhere else. I don't remember where exactly and I can't find it anymore. When searching through yeggi, i think it's from cults, so i chose that as source, but it has been removed from there, so I…
Scalable Design I designed this 5" self-watering planter insert to easily be scaled up and down for different pot types. Simply measure your pot diameter and set the dimensions in your slicer. The design is 5"x5"x5" which makes it easy to…
See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…
This is a Einsy case for the Prusa Bear MK3/S. It's a remix of Juan Puchol's great work. https://www.thingiverse.com/thing:3901001 with some inspiration from a remix shown on the Bear FB group. (I'd give credit for that but I can't find…
There already are some bunny planters on Printables, but I don't like how you need to put the plant with soil directly into the model. So I made this version which contains a cylindrical cutout to take standard 55mm plastic flowerpots…
Important: there are 2 options that mount to the cc2, one is the pipe which allows you to use ALL/Any of the MODULAR system, the other is just a connection to go from the cc2 to what ever ducting you have, this does not allow any of the…
These name tags can be used to not mix up glasses/mugs/etc. at various occasions. In case the name you need is missing, I also added the FreeCAD with font (SIL Open Font License) for modifications. You can also send me a message in case…
A fun, articulated flexi dragon you can print in one piece— no supports required ! This print-in-place model wiggles and bends smoothly, perfect as a fidget toy, display piece, or fun gift. This model includes two versions : 🐉 Standard…
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version (Cults3D). Added a new option with hole for HDD. Fixed the wrong model in the files.…
General: This stand fits 3 replacement blades, and 2 combs. The body pocket is based on my 3d scan of the oneblade, then offset .5mm so it fits perfectly. There is a hole at the bottom of the pocket for charging. Why I designed this: I…
Hi Mark, here is the 3rd option, hopefully there is something in here you can work with. As always check the sizing suits your needs and post some picks if you do take the challenge on, Cheers Jace
A curvy designed bowl with four compartments. Ideal for snacks... The standard dimensions are 200mm x 65mm. It can be scaled as desired. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+…
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
![[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE](https://media.printables.com/media/prints/1137278/images/8582109_08a5091e-d6fd-4b16-aede-06f1f3f273cc_a863e0eb-efc0-4315-8953-1c3240258fd2/2025-01-06-ad5m-bowden-ptfe-coupler-c-clip-option-2-of-3-printables-thumbnail.jpg)
![Silent Fidget: 4-in-1 Design [Optional Keychain Hole]](https://media.printables.com/media/prints/1112357/images/8597088_614ab486-ef8a-486f-a37e-5ddec4861b6c_49b9d3bb-48f4-4bec-a260-c382bfc57953/the-quiet-fidget.jpg)
