Counting matching models…
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant
This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
A box for Analog Devices Adalm-Pluto SDR with "Clock in" SMA connector for external Clock source. In near future there will be diffent bottoms of this box with USB holder, mounts to tight this box down. If a change is needed to this…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for PETGSource material: PET
I've developed these straightforward brackets to mount 19" rack devices vertically onto walls. My design stands out by creating a small air gap between the device and the wall for improved ventilation. The fully parametric Fusion360…
Print approx. €5.67–€6.93 excl. taxPreliminary estimate for PETGSource material: PET
Maturity: Very good. 8 prototypes. In use since 2024/04. Personally I fixed my charger with some double-sided tape inside the charging station. Accept charger with the sizes: Up to 150x30mm Up to 75x40mm Slot space is 21mm. Printing…
Print approx. €27.74–€33.90 excl. taxPreliminary estimate for one variant
Hello, Today I have for you Priests, Sorceress, Novice, Mummy or whatever you wish. Suitable for board game figures, or just for a diorama. It is fully authentic, suitable for coloring. I used PLA/PETG Basic as the material No need to use…
Print approx. €9.12–€11.15 excl. taxPreliminary estimate for one variant
Opzetstukken voor de festool-stofzuiger, zo kom je ook in de kleinere kieren. Attachments for the Festool vacuum cleaner, so you can also reach into smaller cracks. Groeten Ludo
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
100x160mm signs, commemorating the sacrifices made in the early, pre-Internet online services. No one today need suffer the frustration of trying to perform important research at 1200 baud, nor the horror of dropped connections just as…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
This is it, this is what I have been focusing on for the last month. the system is done, I am not making anymore adjustments at all. There will be more mounts there will be more options but tis is the base system in its glory. Hi I'm…
You may have several laptops or other electronic accessories. Here is a vertical multi devices stand to optimize your space on your desk. This stand can old at least 3 devices. The parametric design is attached so you can generate your…
I recently renewed my network setup at home with Unifi devices. That included Unifi Gateway Ultra, Switch Lite 8 POE. At first I stacked them on each other but it would have bad effect like thermal issues and also not good in terms of…
Overview: This enclosure is designed for outdoor solar nodes/repeaters to be hung from tall objects such as trees, giving users the ability to place their nodes at higher altitudes on their property when they don't have the ability or…
I made this mount for my Wahoo Element Roam. I think it should also work with Garmin and Hammerhead devices, it would be cool, if someone could try this out. Best print in the same orientation as you would apply to the bike, so the 2…
I print these in PETG. The tap rack training aid is printed standing up.
Beim Saugen im Haushalt und besonders beim Auto stößt man immer wieder auf Ritzen, die zwar voll von Dreck sind, aber auch so schmal sind, dass die üblichen Staubsaugerdüsen nichts nutzen. Hierzu habe ich diese Düsen konstruiert und mit…
This was inspired by Zack Freedman's Gridfinity project. I wanted to be able to store some of my frequently used USB devices (USB-A or USB-C). I mashed up a couple different objects together to make this 1x2 bin that will hold 4 different…
Object description Handlebar Mount for Garmin Devices or Compatibles. The parts fit directly to a bar diameter of 35mm. For smaller diameter, you can find an adapter in the folder “Optional Parts”. The flat adapter is intended to be…
The official cleaning manual tells you to use new screens every time you clean your device. This seems very wasteful, in my opinion. Trying to bend the screen by hand is imprecise and can land you a new, unintentional piercing. I've…
Object description Handlebar Mount for Garmin Devices or Compatibles. The parts fit directly to a bar diameter of 35mm. For smaller diameter, you can find an adapter in the folder “Optional Parts”. The flat adapter is intended to be…
Use your Ryobi 18V lithium battery to power… anything! I designed this to power my Garmin Striker fish finder on my kayak. Print in PLA at 50% infill for strength. Supports are not needed. Use two short lengths of desoldering braid for…
This is a dummy model for sizing the new Core Devices Core Time 2 to get a feel for the fit and what straps go with it. This model IS NOT perfectly accurate. However, it is close, likely much closer than 1 mm of all dimensions. This model…
Update: This is for Heltec ESP32 LoRa boards and an 18650 battery. Since I've been working with other boards, I have switched my development efforts to a more universal style “radome” for GPS/LoRa/Meshtastic/RAK WisBlock style devices.…
Printed in PETG but PLA fine. Designed for M4 Inserts and M4 Screws but M3 work in both cases. Used 0.6 nozzle with .3 layer height. No supports needed.
I noticed that if I positioned my Ubiquiti Unifi USG router and my POE switches (US-8-60W and US-8-150W) vertically on some stand, the cooler ambient air got inside them and moved upwards thus cooling the devices naturally. This small…
3D Printed Inhaler Holder I made 2 inhaler canister holders, the first is a regular holder and the second is a miniature 'fast print' inhaler. The fast print inhaler can be made in an emergency, this version takes 5 minutes to make [using…
Migrating from thingiverse https://www.thingiverse.com/thing:4362267 Remix the large one to be able to hold thicker devices, especially the ones with a case on. Original here https://www.thingiverse.com/thing:3146835 gap for the devices…
Fits standard 6" (Kurt) machinist vices where bolt holes are 3.875" from center of each other. Use two pins that correspond to the angle you want (ex. for 0, 1, 2, 3, etc. degrees need to have a pin on in one of the A's on the left side…
Its a simple model of phone holder to keep 4 of my devices 1 kindle, 2 phones and 1 tablet near my bed side. Lying down and easy to charge with cables. I had slight issue with bed adhesion but overall its very functional. May need some…
This is a model that allows you to charge up to 4 USB devices simultaneously off a single Ridgid 18v battery. It requires a Ridgid replacement switch that I bought from HERE . 2 Makerhawk DC-DC USB boards from HERE . 4 M3 x 10mm screws…
Two versions available. Print it solid, or print without top & bottom layers & an infill to suit your style. Uses the USB-C nomad style charging dongle sold by Core Devices. Will not fit the old style Pebble Corp charging cables. V2…
This is a remix: https://www.thingiverse.com/thing:398614 I used SketchUp to design the file. The windows made out of clear filament. I've grouped the windows together, so please explode them from the rest of the design. I used a…
Up to now, there were only component lead benders for through-the-hole components. Using your 3D printer, you can have this now even for SMDs, making manual prototype assembly or component-level repair of SMDs much easier! All SMD…
A part of RMIT Major Project. Hi everyone! this device is intended to be the first of a family of product developed for the purpose of aiding daily lives of people with mobility impairments, specifically arthritis. This project especially…
Holder Bar Clamp GPS/Devices Customizable - for Ø12-14-22 mm Bar Dimensional data: 60x60mm (18+18mm) 4 Holes M5 18 Holes M4 Update: 18/08/2025 Added Rev1 Models
2-way and 4-way 22mm connectors to permit ventilation of multiple patients on one ventilator Print instructions Prints quickly and without supports in up to 0.3mm layers in both PLA and PETG. I'm working on a flow restricting valve (in…
PETG or ABS, 2-3 wall thickness and little infill, I have used 20%. Use two ¼" screws, max 3mm heads.
Just simple case for rpi zero, Sony IMX219 sensor and AR9271HP WiFi card. Category: R/C Vehicles
This model holds five USB devices to put near your desk or anywhere. It accepts lower profile USB flash drives, wireless USB dongles, and others. It features rounded edges and no supports or brim are required.
Nozzle 0,2/0,4 (0,2 recommended) 100% infill, or print as a solid 0,1 First layer 0,15 the others I printed with polymaker's polyterra in orange at 215° 50mm/s overall It fits any 6 series recorders from Sound Devices, it just snaps in…
PETG - for strength and flexibility in the clip 100% infill - for strength in the clip Tree support for the clip + upper arc. -- A20 is secured with 2 countersunk screws (2,5x8mm), remember to remove small Allen set screws first, there’s…
PETG 100% infill Probably won't fit any other combinations than 888 + K-Tek Stingray Small X Use this instead of the velcro (I have cut it off) - for more room on the sides, a more rigid frame, and a fixed location of the 888.
Edit log: Date: 05.10.2025 | First Upload So far, whole rack is designed for 250x250x250 mm beds on the 3D Printers. In the future I will upload version for 180x180 mm beds, especially for A1 mini fans ;). Date: 05.11.2025 | First Upload…
A stand for up to four handheld scanner or two-way radio devices with a belt clip, based on my other model for one device. No supports required, I printed with PLA+, 15% infil. There is a single device version here , and a three device…
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
This print was designed to embed one ¼" Ruthex threaded insert and two M3 Ruthex threaded inserts.
Made a longer case to make more room for the electronics. Also features a built-in usb buck conveter (see last picture, not sure what it's model is) slide-in mount. I only provide the alternative variant of “ Case_Bottom.stl ", other…
These two vices can be used to repair your broken gimbal mount struts for the DJI Mini 2 (and maybe the Mini 1, I haven't tried this though). The fit should be tight, and the gimbal should snap into place easily. Required for repair are…
Device organizer, holder and charger in one part. Can be printed with or without Apple Watch charger stand (Device_organizer_and_charger_whatches_stand). Glue watch holder to the main part, if needed. The two parts must be printed with…
I designed this charging stand to be used with an off-brand magsafe wireless charging puck from Xtreme Power for both the phone and earbud chargers , though the earbud charger doesn't need to be magnetic. This stand should work for any…
I am building up a storage server for my classroom, and have a bunch of old spare parts. I needed something to convert from 3.5" drive bays to 2.5" drive bays, but.. supporting two. This is what I came up with. Note there are a bunch of…
It's not just their people that need a helping hand - assistance dogs also need help manipulating an environment not designed for them. This starter kit includes a light switch paddle, a doorknob puller, and also a unique set of scent…
Mount a dashcam or electronics in your Toyota vehicle's front windshield using only the stock mirror bracket. No suction cups or drilling required! This mount securely attaches directly to the existing bracket built into windshield. The…
To store some bike accessories at home, I wanted to have some kind of Garmin/Quarterturn mount for a cabinet or wardrobe. While it's difficult to print a whole Garmin mount with its undercuts, i figured out that having just the bayonet…
Parametric shelves for rack-mounting non-rack items in a 2U 19" space. The parameters can be customized in Fusion for length, width, height, and beef (plate and shelf support thickness). Customizing some parameters past their limits will…
Had to make ears for an earless 1U Behringer device I had. Also made 2U because why not 1U fits Composer Pro-XL MDX2600 and Powerplay Pro-XL HA4700 2U fits Ultragraph Pro FBQ3102 Likely they fit some other Behringer devices, these are the…
Hier ein Modell für verschiedene USB Geräte, wie zum Beispiel USB Sticks, Micro SD Karten, SD Karten und zwei Fächer für Kleinkram. Gedruckt in PLA, keine Supports oder Brim nötig.…
Print this, its OK. Lowers FPS quite a bit, but no darts got stuck in my testing. It uses 4 m2 x 6mm screws (I used button head). Use at your own risk, like i said, its ok, but not great. :D
Stand to hold iPad, laptop, notebook devices. Included models for 2, 3, and 4 devices. The Autodesk Fusion file source will let you adjust the size of the slots and the number of devices. I printed using PLA with 0.6mm nozzle, 0.20mm…
Aid for https://www.printables.com/cs/model/50151-modular-miniature-vice for tying fish hooks. Allows you to hold the eye and wrap the hook more easily. A low matrix must be used.
I couldn't find a flash drive holder that met all my needs so I made one myself. If you print it, please share a make! Recommended Settings: 0.3mm Layer Height 15% Grid Infill
USB key holder box to be used for delivering video and photo services.
I printed this cable winder in TPU and stuck it to the notebook power supply with double-sided adhesive tape, as in my example. The clip in the middle is designed for a normal cold device cable with TPU. If you use a different cable type,…
Update - various angles now available! Description This is an adapter to connect any Bosch device with the Bosch-specific Click and Clean vacuum socket to the osVAC system. I made it for the Bosch miter saw GCM 8 SJL, but it should also…
On the Bambu Labs X1C Carbon, to reach the rear lead screw to clean it. This uses a toothbrush for deep cleaning
These magnetic soft jaws are designed to protect delicate workpieces in a drill press vice, improving grip while preventing damage. They snap firmly into place using embedded magnets for quick install and removal. There is one jaw face…
Can be printed without supports. Infill 20-30%. Can be used for a lot of devices, I added extra space for easy slide in / out, the device will stay with a little angle for easy grip. Wall mount with 4 screws. Fits iPhone, Android Phones…
Collection of RK 62 M2/M3 muzzle devices for airsoft use: -Tri lug flash hider for airsoft 14mm ccw, acts as QD mounting point for other devices and "Crown" thread protector for it. -Three peace silencer: Base, Can and Baffle, 44.5mm wide…
As everyone in a mobility device knows, everything you really want in a grocery store is on the top shelf. I am not a fan of grabbers because they are too big and cumbersome and often provide poor grip. I like to simplify the problem so I…
When designing electronics, the enclosure plays a crucial role that is often overlooked. In addition to protecting sensitive components on printed circuit boards (PCBs) from dust, moisture, and physical damage, an electronic enclosure…
Measurement device for measuring if robots in the RoboCupJunior Soccer competition “swallow” too much of the ball to make sure it is always possible for opponents to recapture the ball. See https://junior.robocup.org/soccer for details…
Authors: Jackson Romelli, Lillie Orians, Anna King, and Gregory Macke These assistive devices were developed to attach in the grip of the J-hook of the EnableUC Body Powered Hook Version 2, were they could hold common objects to…
Use 16mm threaded push switches which are available in different colors (f.ex. https://de.aliexpress.com/item/1005003400929705.html)
With this jig you can use your knive sharpener also for sharpening chisels. I use a TSprof Kadett though other devices like this should also work. The 3D has two slots (16 and 6 mm) for holding and aligning two sizes of chisels. If yours…
This was prepared as part of a white elephant gift for a group of engineers, but also served as a simple introduction to OpenSCAD. The source SVG icons were processed via a script through the Inkscape CLI to slightly thicken the outlines…
Basically a case for the FakeTec v4. I've yet to try other revisions. Its spacious inside, no cable channels etc. Use whatever cable or wire you have, big or small gauge, throw all the stuff in there, solder it together and boom - super…
We designed models for devices that can assist people with arthritis. The Mouse Holder and Wrist Support allow for a better more comfortable use of computer mice. The openers allow for an easier time opening jars/bottles/cans without…
Replace plug cover forOBD 6-pin with a hle passthrough for cable that activate a device on your motrocycle
I wanted a stand to charge my new Pebble 2 Duo, but the watch only came with a USB C -> Pebble adapter dongle. This stand fits the dongle and turns it into a proper stand for your watch! There's both a double-leg version, and a single leg…
Well I just realized my caliper is running out of battery and it uses a LR44 battery. I only have LR41 batteries on hand, so I designed this. This should work for all LR44 devices with side pole contact. Feel free to visit my github page…
This is a bracket for 19 inches rack mount devices. You will need to print each file two times. You will need the following hardware to attach the bracket on the Ivar side unit. 8 x 8-32 2.5 inches bolts 8 x 8-32 nuts 8 x washers for 8-32…
Holders designed for components with a 14 mm standard taper joint. Because the bases are small, stability depends on the center of mass staying mostly above it. Too much off-center weight will make it tip over. To help with this I…
Introduction The Roland MIDI half-width devices stack nicely onto each others, but unfortunately slide around too easily, making it precarious to operate or move around. Therefore, I've created this assembly to solve this issue. This…
This universal pole-to-wall mount allows you to install any device originally designed for pole mounting directly onto a wall. Ideal for outdoor access points, antennas, cameras, sensors, or any equipment that normally attaches to a round…
We needed a wall mount for some AirMAX LiteBeam 5ACs. Supports are required for the top portion. Printing the object with a 0.6mm nozzle is ideal, as the layer lines let the LiteBeam mount bite in nicely. A higher infill density is…
I put port covers on everything I know, but normal silicone ones aren't available for many ports and connectors used across the Maker / Electronics / Arduino / RaspberryPi world. So this page is where I put all the connector cover models…
Needed a chargingstation for my electrics, since i already had a lot of cables and charging adapters i made this.
For assembly you will need M3 bolts and nuts
most din CB's have a notch behind them which does not allow them to clip into the original part, so that plate was remov
I made this support for an UR (Universal Robots) arm so it could handle a camera and a photocell for a project purposes.
This bundle includes the PenHolder, PencilHolder, OtherHolder and OtherHolder Band Add-On The PenHolder, as shown below, organises your pens The PencilHolder organises your pencils The OtherHolder organises your usb drives, sd-cards and…
designed this for my monitor ambilight setup. usb-c port, usb power isolator and rp2040 Hopefully it's useful for one of y'all too I modified the cover in the slicer so there's no trapped heat (small central volume with zero top and…
More part numbers and CAD formats on www.traceparts.com/goto?Product=90-02092021-036468
*note: The scad previews won't work correct in ThingVerse because this design imports and extrudes an dsx image (also included). Don't worry, it works. I also uploaded the STLs just incase. This is a model of the EMR Logo that I printed…
A simple case for the EVAL-CN0419 Usb-Isolator from Analog Devices. It uses heat inserted threads for the mountig threads and also for attaching the top part of the case. You need to split the model in PrusaSlicer and orient it correctly.…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A charming miniature inspired by the iconic Resident…
Ikea EKET offers a nice box size with options for feet or wall mounting and it comes pre-painted. The Ikea KALLAX wasn't really designed for this but can be cut down (pictures in description) to work for this design and again is…
Dieser Gehäuseboden ist speziell für den **SanDevices E682 RGB Pixel Controller** konstruiert. Die Platine wird auf Trompeten-Standoffs mit M3 Einschmelzgewinden montiert. Vorne gibt es zwei getrennte Ausschnitte für die Stromklemmen,…
Below text was copied from the original model and updated with information specific to the NH-based hotline. Why Whistles? Instant alert system Simple, cheap, effective Noise = visibility Turns silence into community action Warns others…
If you have bought a Skoda of some sort and you don't use the posibly included multimedia divice holder for your cupholder but you have a use for it in your house, well this is a shell for it, so you can put it on your desk or wherever…
the model is a side table pre sliced and the front mug is now dovetailed in will need glue for the rest of the parts
