Low Profile Iron Sights - SIGNET v3 Blaster - Nerf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleek low-profile iron sight for the SIGNET v3. Replaces the top Picatinny rail.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to slide directly onto the top of the SIGNET v3 Blaster instead of the standard top Picatinny rail for a clean, sleek look.
🟪 Sleek Low Profile: Replaces the top Picatinny rail.
🟪 Lightweight: Requires only approx. 12 g of filament.
🟪 Support-Free Print: Designed to print without any support structures for a clean surface finish.
🟧 Printing Tips & Fitment:
🔸 Brim Recommended: Use an outer brim with a really small gap of 0.05 – 0.1 mm to the object so it stays anchored during printing.
It’s a rather tricky 3D print. My first attempt failed because my printer knocked it over😉
🔸 Fitment Adjustments: If the sight sits too loosely on your printed blaster body, apply a small strip of electrical tape underneath to increase friction and ensure a snug fit.
------------------------------------------------------------------------------------------------------------------------------
The file is already pre-oriented.
🟧 My print settings for PLA:
0.2 mm layer height
4 walls
20 % gyroid or cubic infill
7 top and bottom shell layers
Wall Generator: Arachne
NO Supports needed
Brim highly recommended!
🧩 Check out my SIGNET v3 Collection:
Find all my matching mods for the SIGNET v3 in one place.
Thanks to Acorn Armaments for the files I could use for this remix.