Liczymy pasujące modele…
My older, simple hex bit holder (wood piece with holes) got too small, so I designed on with more space. My requirements: Must hold bits, and also a few bit extensions Must look somewhat cool, and you should not be able to produce it in…
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
My sister wanted a ring with cat ears. This is the second iteration with slightly smaller ears so you don´t snag on everything while wearing it. The parts/Files are for a ring with 20mm inner diameter (22mm OD, 5mm thick), you can scale…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
I found another (supposedly) M33*3,5 Thread lathe chuck holder on Printables that whas unnecessarily big and also had a wrong thread pitch. I did however like the idea and modelled my own. I prints in around 1h40min, PLA worked fine for…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…
Wydruk około 2,31 €–2,82 € nettoWstępna wycena jednego wariantu
I found an old LED-Strip which I wanted to use for the box my PrusaMini sits in. The clips are very simple, print laying down (I tried it standing up, but it just takes much longer and the others are by far string enough), and can be…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
I needed a holder for my safety goggles as I was tired of them dangling around on the simple knob I had used beforehand to put them on the wall. This holds them relatively firmly, and I guess it should fit almost all styles of these…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
I really liked the design of CollinsDesigns Motor visualizer, but did not have the correct magnets. So I designed my own version for cylindrical magnets with 8mm length and 5mm diameter. My version also has 6 arms, because why not. There…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
As stated above I wanted the bigger knob for the fully printed screw for HDCreators very nice miniature vice, as that was missing from the collection. Please note that I did not design a updated lid for the knob, the original one does not…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I like my old Dahle 77 pencil sharpener, it works very well. Unfortunately, the old box for the shavings is already very brittle and broke. I modeled it as good as possible, and did have to file the box down a bit in some places. This is…
Wydruk około 4,02 €–4,91 € nettoWstępna wycena jednego wariantu
My aunt asked me to make some knitting stitch markers in different colours. I designed this, which works well with PLA and ABS (thats what I tested so far). They print in around 1 min each, when printed in larger quantities and with an…
As I could not find any really good models of the standard Victorinox Toothpick, I designed my own in a few iterations. This is now the fourth version. It fits all my (by now relatively large selection of) Victorinox Swiss Army Knives…
It is a very simple model. It has a lip on one side for the bearing to rest against. Maybe you have to very slightly shim around the bearing, as I designed it for a slightly loose fit (at least for my setup). The screws might be a little…
I liked animatorgeeks take on the vase mode dessicant container. I also wanted to try and dry the air inside my car with silica gel, to avoid fogged up windows when driving in the cold mornings. I therefore modeled this thing from scratch…
I liked the shape of the model this remix is based on, but wanted to improve the very sharp backside. I also wanted to remove the artifacts that made the print visibly “edgy” in some places and led to a lot of ringing. therefore I…
I printed this with an 0,6 nozzle, make sure to not have a too high layer height on the fillet part. Everything else is fine with 0,4 mm layer height. Prints in vase mode
I love the blinking owl key holder, but the original does not have a good way of attaching the part to the wall (except double-sided tape maybe). This is just a simple cutout for mounting with one small screw. Please note that the…
I like Meister Edels belt tensioner for the MK4, but I do think that it has too much play. This remix fits the standard 20*3 mm idler shaft and the original idler, with less play for the idler wheel. For assembly indstruction etc please…
Edit: Updated model! Improved tolerances and added more rigidity. The cap of the rear windshield wiper of my car went missing a long time ago, I have now finally found time to design a replacement. Works for my Toyota Aygo AB10 from 2012,…
I mount my computer screen with the multifunction arm mounting system, and I used the small arm version. For this, no adapter to the standard VESA 75 mount of the big system existed, so I designed my own. Fits e.g. to the “holder small…
Holds teslapunks drill press vacuum hose to the bottom of a drill press table (or somewhere else) Just use two wood screws. I printed it in PETG at 0,25mm layers, that is plenty enough.
I wanted to use the the multifunction arm mounting system to mount my computer screen because of the adjustability. Using the long arms, even with the smaller version, however would have been to bulky. This simply connects two of the…
The screw-on chuck holders work well, but I still improved them to this slip-on version. Just push the chuck onto the holder all the way back, and it sits securely on the threads and will not wiggle off. I realize this could be done with…
I saw another model (https://www.printables.com/model/400968-wall-holder-for-carpenters-ruler) which gave me the idea for this, but I found it too bulky and it also needed a lot of filament for what it is. So I designed this from scratch,…
Some filament spools dont have a continuous flat inside surface. These spools then dont properly register on the bearings of my spool holder and therefore dont turn properly or sit on there crooked. These simple tubes just slide over the…
I find that I need to have everything directly at hand to actually use it, especially with stuff that is used for cleaning up. So this holds my 45mm vacuum hose at a handy height at the side of the workbench. I printed it in PLA with a…
I have these wird blades with three notches, these did not fit in the original model. I you want to check if your blades fit here please check the drawing with the measurements. Secondly I added a magnetic blade guard, optimized for…
The tool to remove tha plastic covers on the nuts while changing tires is very handy, but did not fit on the bigger caps on the Opel Corsa. this is rescaled, I also added text for identification. Will fit any cap with around 24,5mm width.…
Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood, modeled after the nice but expensive Hope Pro Sander. This version fits the more “standard” 608 bearings. You can see the two versions in the third…
Use this at your own risk and caution! I needed some specialty jaws for holding a finished workpiece without damaging the surface. For this, I designed these special jaws to an exact fit. These jaws fit on the Teknatool SuperNova Series…
One of the plastic feet of our stepladder broke, so I designed this replacement. The stepladder is a noname brand (I did not find a brand name on it at least), but the feet should fit all 33*20 or 40*20 aluminium extrusions, I hope this…
I needed some rounded corners for a furniture project, so I quickly designed these to use with a handheld router and a flush trim bit. Provided are the sizes 25, 50, 75 mm, others could be customized (if you have solidworks). The models…
Simple model to mount the Extension cords/Sockets by brennenstuhl solidly wherever you want. Uses two screws per side. Needs supports to print, I suggest printing in the orientation of the .3mf for best strength.
After the extraordinary success of my fast-and-spinny-Prusa-Mini-knob (25 downloads in 1,75 years) I wanted to refit it to the MK4. This knob allows for one-fingered operation of the LCD-screen. I like this version best because it is much…
I needed a strong hook for the garden to hang e.g. flower pots or tomato wire from. This is this hook. For outside use I reccommend ASA, print with enough perimeters to completely fill the hook (I used 5 perimeters with 0,4 nozzle).…
Attention! The moon lamp has to be printed at 80%scale to fit this! I did that because it would not fit on my prusa Mini otherwise. Print it from the provided .3mf, I suggest. Use a standard GU10 Socket, solder the wires to a power cord…
I took the diamensions of the original three-finned-knob from Prusa and modeled my own knob. I wanted a spot for the thumb to sit in for easy spinning, as that was what I most disliked about the original. I also dinßt want to have to…
I needed to sand the inside of a narrow but deep woodturned part (for a “Weizenholz”). It is very dangerous to sand the inside by hand, and you can't reach the bottom anyways. This is a adapter for the Crown Revolution tool (I have the…
this is heavily inspired by the IKEA Komplement holder, of which we have one. Printing a second one was much faster than going to IKEA and buying it. Screws into the existing 5mm/System 32 holes with the standard Euro-Screws ( I used…
I needed the Adapter for the pneumatic fittings for a M6 thread. This is completely made from scratch, but it very much looks the same as the original because the original by Meister Edel works well.
I needed some Nametags for different keys, so I designed this very simple part. You can customize the Text in Solidworks. Watch out not to make the text to small, as I had a few problems where it wouldn´t print the dividers between some…
I like the nozzle holder by mika for the Kärcher vacuum cleaners, but I did not need it with 4 slots, so I modified the thing to only have three slots. It now also comfortably fits on the Prusa Mini.
As mentioned in my original model I wanted to design a dust extractor attachment for my rotary bowl sander. This attaches to my dust extractor hose (40mm ID, a bit of a special size) and has a few openings at the top to suck away the dust…
Fits 16mm rods/tubes. Use two screws (max. 4mm) for fixing. Endcaps just hammer into the tube. I suggest printing in PETG/ASA, especially for outdoor use. Use enough perimeters to fill the complete “Arm” for best strenght.
I liked the idea of a dust cover from InqEnzo for the dust cover and designed a version for the Nova G3 Pro-Tek woodturning chuck. It will not keep all the dust out, but most of it I hope. The disk just slips on and forms a press-fit with…
I did see some other models with replacement clips, but not necessarily with both clips for the top and the sides. Therefore I modeled these. They are not 100% exact replicas of the original, but close enough. And they work similarly…
Just some simple cable organizers, you can clip them on from behind, there is some space for the cables in the back. I like the clean look. There is a V2 which is much stronger, but not tested. There is also my custom bottom mount for the…
Mostly just scaled and adjusted to fit the smaller M8-version of the woodturning bowl sander. Prints flat on one side, I would add a little bit of support for the “upper wing” as shown in the .3mf Bowl sander found here:…
Just Peppes excellent model without the hexagon cutouts
I firstly made a “fixed” version of a laptop riser, but also wanted a version to take away with me. Fixed version: https://www.printables.com/model/451648-huawei-matebook-d16-laptop-riser For this mobile version I adjusted the tolerances,…
I was missing one of these clips, and just copied another one. It would have been much faster to just use a ziptie. Print in PETG, PLA might break when trying to clip in in.
As it says in the short description. It holds the sander on the wall. I tried to design it for minimal dust stay-on-top-ability. Printed on one of the angled sides from PLA. This fits the M10-Version, there is also a M8-Version for the…
I know this is kind of pointless but I think it is very funny. It is a handle for furniture in the System32-grid, there are versions for both 128 and 160 mm hole spacing. I printed it with the holes facing down to the printbed, added a…
I couldn´t find a nozzle holder that worked for my specific case. It holds 15 nozzles which is much more than I currently own. I did model the threads a bit tight as it seems, but running a standard M6 bolt through the holes after…
My box for my Powerfix scalpels/Exacto knives broke. This is a replacement, more space efficient and has more storage for replacement blades. One thing that always bothered me with the old box how much space was wasted due to the big…
printed in PLA with 4 perimeters and 20% infill, plenty strong enough. only needs very little supports on the buildplate for the hinge pins. Should work with any filament (except maybe TPU)
it just jams onto the metal rod that you push down with your foot to use tha rear stand of the motorcycle. I certainly do not suggest to ride with these light shoes I am wearing in the picture, I just sometimes have to rearrange the bike…
Simple reducing rings to use a 25 mm die threading holder also with some smaller dies (because I am to cheap to buy a suitable one). Fits 20 mm dies and also small 16 mm dies. This is a Lux tools die holder but I think they should all be…
I wanted a holder for the filament sensor. My spools are very close to the side of the printer, therefore the holder had to swivel up and down. I found an igus-bushing that does the swiveling, although this is most probably overkill. A…
With the revolving cable mount I had a nice way of mounting the cables, but the power adapter then just laid around without a cable. This fits into the dovetail of the female parts of the cable mount and now holds my power adapter. Please…
I did not like the holder for the brush that comes with the product, and the bottle with detergent also is always in the way. So this slots into the second notch on the charging base station and stores both of these. In my print the tube…
Can be hooked into the top of an Egger acoustic panel, and will fit in one of the grooves. Pull it down slightly to notch it securely into place, some wedges will bite into the cardboard. Print in the orientation shown in the .3mf with…
Can be hooked over the top of egger acoustic panels, if installed with the aluminium extrusion as shown. The back will hook fit in one of the grooves. Pull it down slightly to notch it securely into place, some wedges will bite into the…
To wszystkie aktualnie dostępne wyniki.
