Liczymy pasujące modele…
Hardware: UFL to SMA adapter required. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU NOTE: If you want a Folding Dual Antenna mount, I've…
For quicker GPS fix and to get the compass in Inav to work reliably. Compatibility: GPS size 25x25mm - Used with Flywoo GM10 PRO V3 GPS, and BZGNSS BZ-251 GPS (Original Mario Fold GPS) Support my work: All of my models are available for…
A folding drone deserves a folding antenna mount. Pair it with 8-inch foldable propellers, and everything fits neatly into the original case—no need to remove props or antennas. Features: Compact and Lightweight for a foldable mount. Dual…
The case is designed to hold a Lightning 2 fpv drone with a top mounted battery holder, and room for six 750mah 2s lipo batteries and 8 two blade 2" props. Might also fit other 2" drone frames. Support my work: All of my models are…
This is a direct replacement front hatch clip for the T1. Features: Can be used to check CG like the original Light weight and Aerodynamic Note: The back plate is not included—and not required. In my experience with this and the original,…
Fits one 65mm tinywhoop, a vifly Whoopstor 3 charger and more than 10x 300mah lipo's. Hardware: M3x30mm screws with locking nuts for the hinges, and 1mm steel rod for the latches. Support my work: All of my models are available for free.…
Use the built-in display of the RadioMaster AX12 to view a live Walksnail video feed. I designed this as a combined stand and mount for the Walksnail VRX, using the original mini-HDMI to mini-HDMI cable. Features: Uses the original HDMI…
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: PLA / TPU
Install a rangefinder in the SpeedyBee Mario Fold 8 for accurate altitude measurement. The model is designed to mount the TF-Luna lidar longitudinally to the frame, utilizing the existing mounting holes that are spaced 25mm apart. It is…
Note: Not tested as my current printer is too small. If you print it please share a make with a nice photo that I can use as a cover photo for this model. I designed it around the Diatone Roma L4 frame with bi-blade props. Other 4" long…
I wanted a GoPro-style mount beneath the SIYI R1M FPV camera, but instead of just designing a simple adapter, I went all in and created an entirely new case for it - taking inspiration from a naked GoPro with an ND8 filter. Hardware: 2x…
Features: Lightweight design Accommodates SMA pigtail with or without base Rear mounting hole for single M2 attachment screw and anchor nut Hexagonal holes for cooling Hardware: 1× M2x4 screw (rear mount) 1× SMA base plate with 2x M2…
GEPRC MOZ7 V2 GPS Mount This model is designed to accommodate a smaller GPS unit than the original mount was intended for. Weight is reduced by more than half. Compatibility Flywoo GOKU GM10 PRO V3 BZGNSS BZ-251 Others with same…
Store your batteries in this box to easily keep track of their charge status while you're out flying. Features: Space for 12x 2s 750mah Li-Po batteries Orientation of the battery indicate charge state Compartment for ToolkitRC MC8…
This design is based on using parts from the original Atomrc one axis gimbal. The quick-release feature for easily transferring the gimbal between multiple platforms remains intact. The baseplate and servomount are printed side by side…
This cover is designed to be loose enough around the camera for gentle removal / installation. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: PLA
Landing pad for a tiny whoop Printer bedsize: Minimum 180x180mm Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: PLA
The camera has a friction fit in the frame. No screws needed. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU
Install these direction-indicating discs on the motors when removing the props to ensure they are always mounted in the correct position. Note: Simply rotate the discs to select the desired CW or CCW direction. Compatibility: Three sizes…
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: PLA
Designed for the TF-Luna Lidar used with a Atomrc swordfish modified for VTOL. Seperate file for wheel delete without lidar sensor. Support my work: All of my models are available for free. If you'd like to show your appreciation,…
Camera pushed fwd to get props out of view. Mounting: 25x25mm Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU Remix of Flywoo original canopy.
Fit a GPS Unit to your RC Helicopter, and get Return to Home and automated flight modes with Ardupilot or the FW H1 System. Compatibility: Max GPS size 28x28x8.5mm (Designed for FW H1 GPS) Got a Larger GPS? - Use double sided tape and…
The batteries can be installed two ways to indicate charge status. It's also designed to hold a Toolkitrc multi-checker. Designed for the large Radiomaster TX16S case. Also fits great in a torvol battery bag. Vifly whoopstor also fits.…
This cover will hold two 21700 6S1P or 4S1P batteries securly together using only two battery straps. Dimensions: Internal = 152 x 43.5 x 25mm Support my work: All of my models are available for free. If you'd like to show your…
Simple FPV camera holder with Gopro style mount. Compatability: Edge Smartdrive T3 FPV camera and the DJI O3 camera (Not tested) Support my work: All of my models are available for free. If you'd like to show your appreciation, consider…
Can't decide whether to fly your 65mm or 75mm whoop? Bring both! This hard case keeps them protected and makes them easy to carry wherever you go. Two storage compartments keep your charged and discharged batteries separated.…
Designed to hold the SIYI A8 Gimbal on the Align TB60, however other gimbals can be customized to fit by changing or adapting the bolt pattern. A blank version of the top plate is provided for custom builds. Hardware: 2x M2.5x6 screws…
Use double sided tape to stick the FLYWING H1 GPS Unit to the top of the bracket. Two cable ties are inserted into the two holes securing the bracket to the tail boom. As an alternative to the double sided tape screw holes are provided…
Antenna diameter: 3,5mm Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU
Designed for the diatone roma l4 frame, but it might fit other frames. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Dimensions: Distance between attachment…
Antenna mount designed to attach the Radiomaster Boxer antenna to the front of the GEPRC MOZ7 V2. While the antenna is originally intended for use with RC transmitters, in this setup it is repurposed to handle radio control, telemetry,…
I use this model to hold two Vifly chargers and power them in parallel from a single power source. Compatability: Suitable for both Whoopstor 3 and Toothstor chargers. Support my work: All of my models are available for free. If you'd…
In my previous design the GPS was mounted on the back, but to get a more reliable GPS Lock I moved the mounting position of the GPS to the top of the quad. Support my work: All of my models are available for free. If you'd like to show…
Designed around the BetaFPV Air 75 II, but it may also fit other 75mm whoops with this canopy style. Check the dimensions to ensure compatibility. Internal dimensions (mm): L100 × W98× H42 Support my work: All of my models are available…
A clamp with bolt on Gopro style mounting for equipment and a secondary monitor to be installed to the UniRC 7 remote controller. It locks onto the handle bar. Hardware: 2x Bolts/nuts for gopro mounts M3 screw kit (Different lengths…
A cover to protect the display of the Unirc 7 during transport. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament / Print Instructions: PLA - Use tree…
Used with the Flywoo GM10 Nano v3 GPS. IMPORTANT: To get a more stable GPS lock I recommend my new design to mount the GPS: Updated version and seperate VTX antenna mount. Support my work: All of my models are available for free. If you'd…
I designed this part to convert the traditional tail rotor setup to a direct-drive tail motor. With a direct drive tail motor the part count is reduced substantially. I hope this will improve reliability and reduce maintenance.…
Compatability: It has only been tested on the 5-inch version; however, it should fit the 4-inch version as well. Check dimensions for compatability with other frames. Dimensions: Canopy outer dimenstions 51x51x19mm Hole spacing…
A cover to protect the display of the UniRC 7 and brackets to hold a Peakdo 7 display that I use for a backup and lower latency video feed. Support my work: All of my models are available for free. If you'd like to show your appreciation,…
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU
Designed to mount two 2s batteries under the OddityRC toothpick drone frame. Compatability: It has only been tested on the 5-inch version; however, it should fit the 4-inch version as well. Check dimensions for compatability with other…
The MIPI cable supplied with the Edge T3 is too short to fit the T3 Air unit as intended in the Geprc Moz7 v2 frame. This small bracket is my solution to solve the issue by mounting the VTX further forward. Run the MIPI cable under the FC…
I designed this part to convert the traditional tail rotor setup to a direct-drive tail motor. With a direct drive tail motor the part count is reduced substantially. I hope this will improve reliability and reduce maintenance. The…
Remixed to be able to lower the height of the Proto25, because I use a AIO FC and a Walksnail V2 VTX (Thinner than O4 Pro) From 28mm standoff , cut down to 23mm. The new height of 23mm is the same as the GPS,RX and antenna mount combined.…
Designed for the Lightning 2 FPV drone to be light weight, easy to print, and hold the XT30 and VTX antenna. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.…
Add a TF-Luna optical range finder (LIDAR) and/or dual SMA Antennas to your Align TB60 / TB70 helicopter with this support bracket. It's attached to the aft landing skid with two clamps and two screws in front, using the predrilled holes…
A bracket that mounts on top of the Edge Smart Drive T3 Airunit to hold additional hardware. Features: Supports 20x20mm and 16x16mm M2 mounting patterns Includes holes for cable ties Hardware: 2x M2x3 screws Support my work: All of my…
Protect your 2.5" FPV drone from damage when carrying it in your backpack. Designed around the ProtoFPV P25, but it may also fit similar 2.5" FPV quads. Check the dimensions to ensure compatibility. Internal dimensions (mm): L126 × W135 ×…
I prefer the shorter tail boom and more compact size of the original T1. However, to use the new quick-release horizontal and vertical stabilizer, the longer T1-S tail boom is required. The same applies when converting a PNP version to a…
The Design This is a two-part design, with the VTX antenna holder separated from the buzzer and XT30 mount. This makes the parts easier to print and gives you more flexibility. The buzzer mount is designed for a 9mm buzzer. The Build…
I experienced poor performance with the nano-sized GPS module I used previously (12 × 12 mm). This model is designed to accommodate a mini-sized GPS module (18x18mm) and position it further away from the drone’s electrical noise.…
Ground station for Tiny Whoops! I've designed this controller from the ground up to combine a Skyzone M5 analog monitor with a BETAFPV LiteRadio 2 SE ELRS radio controller. It can be used with any ELRS drone that has an analog VTX, but…
I've designed a stand alone Green strobe light for drones powered by a 300mah 1s battery commonly used with tiny whoops and attached to the battery strap of the drone. This is a DIY Project, used to comply with EASA / UK regulations for…
Wall mount for the Heewing T1-S mounted with a single 4mm screw. I use it on an original T1 with a T1-S tail mod. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A…
To wszystkie aktualnie dostępne wyniki.
