Liczymy pasujące modele…
The Fury X Flared Magwell is an upgrade magwell for the X-Shot Skins Pro Fury X blaster. Featuring a pronounced flare and an angled chamfered design, this mod part allows for quicker and easier reloads while retaining the blaster's…
The X-Shot Pro Piston Pump AEB Barrel Shroud is a stylized muzzle to cover the exposed barrel of the X-Shot Skins Pro Motorized Piston Pump AEB. Featuring a Picatinny rail and M-Lok-compatible slots, this shroud allows for the mounting of…
The Fury X Picatinny Stock Attachment Point is a low-profile stock option for the X-Shot Skins Pro Fury X. It replaces the awkward switch-style mag release with a short length of rear Picatinny rail. Designed to use RedCowl's Simple…
The Shearforce PBCAR is a variable-mode rifling attachment platform inspired by the principle behind the Rexfire Akasha “Super BCAR.” Featuring an initial, more aggressive PCAR segment to pre-rotate the dart, followed by a gentler BCAR…
This Picatinny Receiver Development Kit is a CAD-ready model of a Picatinny-spec rail receiver that can be quickly adapted and customized to mount virtually anything to your blaster. The model isn't a usable tactical rail receiver without…
The Impulse Ungineering Ontos O-ring Breech is a modified breech part that uses a DASH-016 O-ring to assist with barrel retention. The O-ring adds extra friction where excess vibration from play may push the barrel out of the blaster.…
The X-Shot Fury X Prime Handstop + Sight is a Picatinny grip designed to add a comfortable place to prime the top slide of the X-Shot Skins Pro Fury X blaster, especially under heavier spring loads. Additionally, this handstop doubles as…
These Threaded Buffer Tube Battery Stock Points are alternative M29x1.5mm buffer tubes optimized to fit the Jikey 1100mAh 3S LiPo used in many electronic blasters. Featuring a chamfered end on the inside, this stock point can easily be…
The Piston Pump Extended Battery Door is a 3D-printed alternative to the stock battery door included with the X-Shot Skins Pro Motorized Piston Pump AEB. Featuring a thicker buttplate, this battery cover accommodates the use of…
The X-Shot Pro Spring Spacer is a simple, theoretically stackable spacer for the X-Shot Skins Pro-Series Longshot and Fury X. This spacer adds pre-compression to the installed spring to increase the blaster's performance without…
The Maxim Pro Dual Mag Release is a 3D-printed mag release upgrade for the Adventure Force Maxim Pro. Featuring a similar paddle to the stock mag release, this part also includes a secondary extended paddle closer to the blaster's grip.…
The AIT + 40MAX Lightning Mag Extender is a 3D-printed add-on designed to increase the capacity of the ten-round magazine included with the AIT + 40MAX Lightning Brushless Flywheel Blaster. Featuring a continued follower channel and…
The WH3DBAH (“We Have 3D Benchy At Home”) Sight is a novelty foam blaster sight heavily inspired by the famed 3D Benchy printer test model. Featuring wider windows and a faux fiber optic reticle mounted to the Benchy’s bow, this is…
These Maxim Pro Battery Doors are 3D-printed alternatives to the stock battery door included with the Adventure Force Maxim Pro. Featuring sleek styling in a couple of different size options, these battery cover options allow you to…
The Hollow-Sun Sight is a novelty foam blaster sight named satirically after the popular brand of holographic sights. Featuring a faux reflex sight housing with a simple sun-shaped ring, this is designed to work as a genuine aiming device…
The Nerf Rebel Ops Doom Cannon Silly Shell Adapter is a dummy "super shell" insert for the flagship spring-powered blaster of the same name. FEATURES: • Doom Cannon Silly Shell Adapter • ... FILES INCLUDED: • 1 Nerf Rebel Ops Doom Cannon…
The Worker Seagull Dual Mag Release is a mag release upgrade for the Worker Seagull CQB Blaster. Featuring a similar paddle to the stock mag release, this part also includes a secondary extended mag release closer to the blaster's main…
The Worker Seagull Trigger Short Stroke + Safety Delete is a drop-in mod part for the Worker Seagull that reduces the pre-travel of the trigger before it engages with the catch. This allows for a snappier, more responsive trigger feel.…
The Maxim Pro Upgraded Trigger Lock is an improved version of the stock trigger lock. Featuring a shorter slot and an extra stair-step catch, this part reduces the travel of the backstrap rev trigger and prevents feeding multiple darts…
The Maxim Pro Comfort Grip Plug is a simple plug designed to enhance the ergonomics of the Adventure Force Maxim Pro. It fills in the uncomfortable open space left behind by the sling point built into the Maxim Pro's grip. This vestigial…
The Clip Mania Battery Door is a 3D-printed alternative to the stock battery door included with the X-Shot Insanity Motorized Clip Mania. Featuring a chunky aesthetic with a stylized "X," this battery cover allows the use of…
The SABOT, or "Self-Aligning Barrel Obstruction Tool," is a low-profile, collapsible blaster unjamming rod to clear blocked barrels in 3D-printed nerf blasters. Featuring a durable shallow chevron shape and two runs of elastic, this tool…
The Zius BK1s / BK2s High-Capacity Battery Stock is a replacement stock option kit for Zius’ AEBs. This upgraded stock can be installed toollessly and fits higher capacity 3S batteries to allow for extended gameplay sessions. This was my…
The Kunlun Dual Mag Release is a 3D-printed magazine release upgrade for the Worker Kunlun Bolt-Action Sniper Blaster. Featuring a similar paddle to the stock mag release, this part also includes a secondary extended mag release closer to…
The Hare Tech Diana 2025 Cosmetic Suppressor is an oversized, cosmetic replacement muzzle cap for the latest updated edition of Hare Tech Diana Brushless Flywheeler. Featuring similar knurling to the original anodized aluminum part and…
This remix of Rivas2303's and Leunam's "Omnipod 5 PDM Case" is a personalizable case for an Omnipod 5 Automated Insulin Delivery (AID) System Controller with additional holes for a universal lanyard-style tether for Tile or other…
The Hare Tech Diana 2025 Muzzle Development Kit contains CAD-ready models of threaded muzzles for the latest updated edition of Hare Tech Diana Brushless Flywheeler. The model isn't necessarily a usable muzzle without modification, but it…
This Fish Tank Duckweed Corral Ring is a floating ring that contains duckweed away from filter intakes or fish feeding areas. Featuring eight concentric half-rings, this stylish corral will always leave spaces of duckweed-free open water…
The RedCowl Low-Profile Barrel Collet + Collet Delete is a remix of the ubiquitous RedCowl Collet System I originally made for the X-Shot Skins Pro Piston Pump AEB. Featuring a lower profile and custom knurling, these give a better grip…
The Hare Tech Diana 2025 Orange Tip is a simple replacement muzzle cap for the latest updated edition of Hare Tech Diana Brushless Flywheeler. Featuring similar knurling to the original anodized aluminum part, this tip is only intended to…
The Pro-Max RIPPCAR combines Thanh's Whisker PCAR v2 with a 19mm OD base to adapt it to attach to the Adventure Force Nexus Pro, X-Shot Fury X, and other blasters. Featuring Thanh's new "Rotated Intermittent Protrusions" segmented-line…
The Suet Bird Food Seed Bell Mold is a simple mold that can be used to make custom homemade suet bird food. Featuring a simple bell-shaped curve, this one-piece mold makes suet bells compatible with most cages designed for conical or…
The Little Rocket PCAR is a simple 5-line PCAR adapted to attach to Little Rocket Barrel Adapters, like for the Nexus Pro and other "Pro-Max" blasters. This allows you to leave your Little Rocket adapter on your blaster without…
The Impulse Ungineering Ontos "Buffer Tube" Sling Point is a simple adaptation of my Universal Buffer Tube Sling Point remix to fit the adjustable buffer-tube-ish style stock on the Impulse Ungineering. This low-profile sling mount onto…
The Impulse Ungineering Ontos Plunger Volume Reducer is a modified Plunger Rod/Tail that shifts the catch point, allowing Ontos to hit lower FPS caps more easily and consistently. Like with Harrier and Seagull, this mod works best with…
This Picatinny Rail Seed Development Kit is a CAD-ready model of Picatinny-spec rail that can be quickly adapted and customized to virtually any length or style. The model isn't a usable tactical rail without modification, but it…
The SABOT MOLLE Holster is a tactically mountable holder for the SABOT unjamming rod. Featuring an open container using the built-in tension of the elastic in the unjamming rod for retention, this holster is a perfect fit for 500mm of…
The US Traditional Light Switch Plate Blank Filler is a reverse or negative of the light switch plate designed to effectively close off unpopulated switch holes in a plate for a legacy multi-gang electrical box. Alternatively, this…
The Suet Bird Food Seed Square Mold is a simple mold for making custom-made suet bird food. Featuring a simple square(ish) shape with filleted edges and a separate base insert similar to fluted apple tart pans, this two-piece mold makes…
The Worker Kunlun Trigger Short Stroke + Safety Delete is a drop-in part for the Kunlun Bolt-Action Blaster that reduces the pre-travel of the trigger before it engages with the catch. This allows for a snappier, more responsive trigger…
The Piston Pump Threaded Breech is a replacement breech part designed to allow the X-Shot Pro Motorized Piston Pump AEB to accept 16mm threaded-breech barrels. Featuring a brass threaded insert in place of the barrel-retaining O-rings,…
The Piston Pump High-Capacity Battery Stock is a replacement stock option kit for the X-Shot Skins Pro Motorized Piston Pump AEB. Designed by Perry, this replacement can be easily installed and fits higher-capacity 2S batteries, allowing…
These Mix + Match Short Dart Bead Blaster Charms are simple two-part short dart facsimiles to adorn blasters and gear. String together foam and head styles of your favorite dart or come up with more cursed foam dart combos. ***These are…
The Repeater Pro Barrel Collet is a 3D-printed muzzle upgrade designed by Perry for the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a two-piece O-ring clamp this mod part makes performance tuning easier with…
The Repeater Pro Spring Tuning Spacer Set uses a series of 3D-printed spacers to fine-tune the performance of the Dart Zone Max Nitroshot+ Repeater Pro Lever Action Blaster with the installed spring. This set includes one full-size spacer…
The Brute Pro Slam-Fire Delete Sear is a quality-of-life mod that removes the slam-fire feature from the Adventure Force Tactical Strike Brute Pro made by Dart Zone. With some additional trimming of internals, including the prime locking…
These Flared Magwells Development Kit are CAD-ready models of short dart mag-compatible flared magwells that can be quickly adapted and customized to other blasters or mod parts. The model isn't a usable flared magwell without…
This QD Sling Point Mount Development Kit is a CAD-ready model of a Push-Button "Quick-Detach" spec socket that can be quickly adapted and customized to mount compatible swivel mounts to virtually anything. Originally designed for a nerf…
The Vesper Expanded Battery Door is a 3D-printed alternative to the stock battery door included with the Hare Tech Vesper Brushless Flywheel Blaster. Featuring a sleek faux-cheek-rest styling buttplate, this battery cover accommodates…
The Repeater Pro RedCowl Collet is a 3D-printed muzzle for the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a two-piece hardware-free clamp using RedCowl's this mod part makes performance tuning easier with quick,…
The Little Rocket RIPPCAR is a variation on the PCAR I adapted to attach to Little Rocket Barrel Adapters. Featuring Thanh's new "Rotated Intermittent Protrusions" segmented-line 18-degree progressive twist, this rifling attachment…
The Chance Blitz Picatinny-Back Grip Stock Point is a simple modification of the battery door that includes a short length of rear Picatinny rail. Designed to use RedCowl's Simple Picatinny Stock, this rear tactical rail is also…
The Hex Nut To M-Lok T-Nut Adapter is a printed T-Nut blank that accepts standard M3 hex nuts and M3 machine screws. While probably not recommended for applications where this part would experience high stress or high temperatures, this…
The E-O TECH-nically Sight is a novelty foam blaster sight named satirically after the popular brand of holographic sights. Featuring two block letters "E" and "O" and a faux fiber optic reticle mounted to the center of the "E," this is…
The XYL Unicorn Tactical Edition Extension Stock Catch Upgrade is an adjustable stock catch upgrade part for the XYL KM900 Unicorn Tactical Edition. Featuring symmetrical lobes reinforced with steel dowel pins, this balances the…
The XYL Unicorn Picatinny Top Rail is a simple Picatinny rail designed to mount sights/optics on the XYL Unicorn Tactical Edition Spring Powered Blaster. The “Tactical Unicorn” only comes with one length of Picatinny rail for use either…
This Little Rocket Adapter is a coupler designed to attach Little Rocket Barrels (or my Little Rocket PCAR) to 16mm or similar OD exposed metal barrels. In combination with my Little Rocket PCAR, this allows you to leave your Little…
The Lightningale Magazine Bumper is a replacement baseplate for the AIT + 40MAX 16-Round Slim-Angled "Lightningale" Magazines. Meant to be printed in TPU and handbell clapper-style "timbre slots," this part is designed to increase drop…
The Excalibur Threaded Breech is a replacement breech part designed to allow the Sillybutts Excalibur to accept 16mm threaded-breech barrels. Featuring a brass threaded insert in place of the barrel-retaining O-rings, this drop-in…
The Riot is a 3D-printed flywheeler designed by Chance. Essentially, it is a larger, full-sized wheel version of the Blitz micro-wheeler created by the same designer. These alternative flywheel cages are variations of the original 40.0mm…
The Universal Buffer Tube Sling Point is a straight remix of the popular Nexus Pro sling point designed by Luke at Out of Darts. Replacing the blaster-specific knurling with a smooth inner surface, and adding a relief cut at the top, this…
The Little Rocket Spigot is an adapter for Little Rocket Barrels and my Little Rocket PCAR to attach to 16mm or similar OD exposed metal barrels. In combination with my Little Rocket PCAR, this allows you to leave your Little Rocket…
The Chance Freerunner v2 Picatinny-Back Grip Stock Point is a simple modification of the battery door that includes a short length of rear Picatinny rail. Designed to use RedCowl's Simple Picatinny Stock, this rear tactical rail is also…
The Spring Comb is a ready-made tool for performance tuning of foam dart “nerf” blasters. Featuring tines with graduated spacing, this device measures the spring’s gauge (AKA wire diameter) to determine the strength of similarly sized…
An M16x1mm threaded barrel attachment set for Small Lee, Kar98k, and more. Includes a replacement Orange tip and a simple 6-degree (?) ported 3-Line PCAR designed to add accuracy to the dart as it leaves the barrel. Highly recommended to…
The SPLAT is a Simple, Printable, Low-profile Adjustable Talon-holder. Featuring a basic, no-frills design, this short dart nerf magazine holster can be debossed or decorated in a slicer app or with stickers. With a wide flat surface and…
The Blaster Barrel ID Key is a ready-made tool for performance tuning of foam dart “nerf” blasters. Featuring a step gauge design with a faux key-bow handle, this device measures an aluminum barrel's inner diameter, enabling reference to…
The Gecko Food Bowl Adapter Ring is a simple adapter designed to make reusable metal food bowls fit in an otherwise incompatible feeder ledge. Featuring soft filleted edges that interact with the outside of the bowls only, this ring is…
These Magnetic Gazebo Curtain Tiebacks are leaf-shaped decorative cinches designed to hold back curtains when stored away from their resting position. Featuring space for three rare-earth magnets and 1/8in elastic cord, these tiebacks are…
The Chance Riot! Momentum Muzzle is an expermental alternative to the blank "no-car" muzzle device in the original fileset. Featuring six lines, this 0-degree PCAR mimics one of the muzzles from Eli Wu's Momentum. It should theoretically…
The Impulse Engineering Ontos Threaded Barrel Breech is a printed breech part that accepts any M16x1mm threaded-breech barrels using Out of Darts' custom brass threaded insert. Featuring a taco-like shape and printed fingers to maximize…
The Chance Riot! Muzzle for Worker Modular BCAR Segment is an alternative muzzle for the Riot flywheeler meant to accept 3x2 Worker BCAR modules. After a short period of testing, I abandoned this design. However, I figured I would publish…
This Worker Modular BCAR Shroud Development Kit is a CAD-ready model of a threaded barrel shroud that can be quickly adapted and customized to virtually any style. Additionally, the shroud covers up the exposed metal of the BCAR for…
The Chance Riot! 0-degree BCAR is an alternative to the blank "no-car" muzzle device in the original fileset. Featuring nine flange bearings in a 3x3 arrangement, this device promises better accuracy and reduced fishtailing by gently…
This Dart Zone Repeater Pro Twist Lock Muzzle Replacement Development Kit is a CAD-ready model of a Repeater Pro-compatible twist-lock key that can be quickly adapted and customized to add to virtually anything to the front of the Dart…
The Outdoor "Sport-Dot" Picatinny Rail Adapter is a simple riser for mounting battery-free fiber-optic reflex sights on foam-dart "nerf" blasters or airsoft replicas. Featuring a faux shotgun rib to mount the sight and a single M3 screw,…
The PewTech PewPew Picatinny Rail Top Cover adds a simple Picatinny rail designed to mount sights, sling points, or other attachments on the PewTech PewPew 3D-printed brushless microflywheel pistol. Additionally, this length of rail has…
The Low Profile Bauer Hand Vacuum Filter Bracket is a replacement twist-lock bracket designed to replace the standard filter assembly of a Bauer 20V Battery-Powered Hand Vacuum sold at Harbor Freight Tools. Featuring a flat ring with…
The Poop Scoop Sweeper Head is a replacement "broom"/scraper thing for the no-name Amazon Poop Scoop Sweeper my parents use to clean up after the dogs in the backyard. The original metal sweeper head is riveted together out of thin…
This MOLLE Name Plate is a purely decorative way to fill blank spots on MOLLE-compatible webbing and tactical gear. Using a slicer or CAD deboss command, this is an easily customizeable file, and you can color text in using AMS/MMU, pause…
The Fenrir 717 Barrel Adapter is an alternative to the rambase or "Pump head" in the Hing Yip Fenrir 717 Bazooka blaster fileset that allows for the use of standard 16mm or similar OD aluminum barrels. This allows Fenrir to muzzle load…
The Adventure Force Pro / Dart Zone Max Worker Modular BCAR Adapter replaces the front nozzle of the Nexus Pro and other "Pro-level" blasters manufactured by Dart Zone and X-Shot, allowing it to Worker Modular BCAR 3x2 rilfing segments.…
The Repeater Pro Silly Spigot Collet is a 3D-printed muzzle upgrade for the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a two-piece O-ring clamp this mod part makes performance tuning easier with quick,…
The Cut Mega Silly Shell is an alternative Mega Dart Silly Shell designed for better compatibility with short or "half-length" Mega Darts. YouTuber Jarek4 noticed an issue with some cut-down mega darts squibbing or refusing to fire out of…
This Pew Card Organizer Tray is a simple, low-profile organizer for front pews that don’t have pockets or cubbies for hymnals, pew bibles, connection cards, and offering envelopes. This tray neatly stores cards, envelopes, and a pencil in…
This M-Lok Compatible Slot/Rail Seed Development Kit is a CAD-ready model of Picatinny-spec rail that can be quickly adapted and customized to virtually any length or style. The model isn’t a usable tactical rail without modification, but…
The SABOT Type-F is an alternative tip for the SABOT unjamming rod designed to better clear blocked flywheeler nerf blasters. Featuring the same flat, double-elastic chevron shape, with a narrower circular end, this fits in between more…
These Unknown Side Table Repair Parts are hyper-specific replacement parts for the partially missing brass-colored decorative and structural parts of a small side table found in the basement of my church. The gaskets provide a small…
The X-Shot Pro Micro Barrel Retentiont is a 3D-printed muzzle upgrade for the X-Shot Skins Pro-Series Performance Micro mag-fed spring-powered blaster. Featuring a two O-rings for an extra-tight friction-fit barrel clamp, this mod part…
The Shearforce-OAB is a variation on the Shearforce Rifling Platform. Instead of the PBCAR's variable mode rifling, the Shearforce-OAB makes the same inverse progressive twist rate with "Oops! All Bearings." With the same low-profile…
This Simple Cosmetics Organizer is a generic (yet hyper-specific) organizer that subdivides an existing cubby into 4-5 compartments. My mom believes she got this organizer at Kroger/Fred Meyer five or so years ago, and wanted a better way…
The Trident Little Sniper Barrel is an alternative carrier to RedCowl's Trident Silly Shell springer-pistol. Featuring an O-ring retaining metal barrel, this allows you to breech-load single short darts with higher FPS and better accuracy…
The Ontos Barrel Collet is a 3D-printed muzzle upgrade designed by Perry for the Impulse Ungineering Ontos v2 "Tryhard Primary for Filthy Casuals" pump-action spring-powered blaster. Featuring a two-piece O-ring clamp, this mod part makes…
This Laminator Feeding Tray Lid is an elevated surface to assist in the level, even feeding of the Gordon 9in Hot Thermal Laminator, previously available at Harbor Freight Tools. Featuring a beveled self-centering feeding channel, this…
The Sillybutts Cynthia Threaded Barrel Breech is a printed breech part that accepts any M16x1mm threaded-breech barrels using Out of Darts' custom brass threaded insert. Featuring a gently tapered hole, this part allows you to thread…
Do they work? Yeah. Should you print something else? also yeah.
To wszystkie aktualnie dostępne wyniki.
