Liczymy pasujące modele…
Remix based on: https://www.thingiverse.com/thing:2790897 Made a very simple cut out for the volume buttons because they will get pushed in with the original version. Also I didn't find any other side stand like this. It has also a place…
I hate this coin cells / button cells don't know what's the exact description is for this batteries in english. These cells have 3V so, it's the same as two AA in series (2times 1.5V) Just solder the wires of the AA-Battery Holder (Or…
Changes Version 2.4 Added Length to Filename. Its from inside the lower hook to the top of the upper hook. Should be distance between the teeth of the metal piece on the frame, to the inner side of the frame. Added 100mm Version Added…
Stand for the chromecast remote. Like my other model, which has an additional place for a hitachi beamer remote. There's also a small compartement for a pen or something similiar. There's a second modell with a slighlty bigger…
All credit goes to Mr Mulac of 3D Printing World for his well-thought out design. I'm such a big fan of this design. It was one of my first prints about 2 years ago (in 2021). I use this clamp so many times for glueing parts together. As…
NOT FOR PERSONAL SAFETY / CLIMBING (I don't know if this sentence is neccessary because this should be clear ;-)) This is a rope spanner / tensioner for 8mm ropes. It should be as simple as possible to mount/remove the rope. Update V2.0 -…
Corner Protection for IKEA Kullen I have this shelf on roles and wanted some protection for the corners if I drive into the wall while moving it, so the wood does not get damaged. It was not meant to protect someones head ;-) V1.0 was my…
The Lego AT-AT 75288 doesn't stand very good on it's own feet so I made this totally oversized stand. I made the adapter because then I don't have to print the whole thing if it doesn't fit. It is not perfect. The positioning under the…
ATTENTION! Version 1.0 did not hold very well. One of the clips was deformed after some time. I think it could be because of the PLA, but I don't really know yet. I used another solution now. BUUUUT: I made a small improvement and…
Title should be description enough. To mount it, unscrew the single screw on the bottom V1.3 is the improved version where the hinges are a bit sturdier. But this version also broke somhow :-D UPDATE 2025-04-13: Added the attachment…
Got a Verbatim USB Stick for work but these small sticks don't even have a hole or loop for a cord or something similiar. I don't really need it for a keychain but, it's easier to find the stick inside my backpack if there ist a small…
Only found something similiar for netgear switches, so I made my own for the D-Link.
Simpel holder for a kids dyson vacuum cleaner. I just used some double sided tape to mount it to a IKEA Kallax shelf. If you need screws I would recommend to use the Modifiers in PrusaSlicer or the slicer of your desire. (You can also…
Stand for the chromecast remote and also for the remote of an old Hitachi Beamer. There's also a small compartement for a pen or something similiar. My Print Instructions/Settings 0.25mm Draft Setting for PrusaMINI in PrusaSlicer (But…
Fog Light Cover for Toyota Avensis T22 I had a broken glass and in switzerland the car gets checked every x-years. Fog lights are not required so I removed the glass and printed covers that I glued in. How I made/measured this? Layed it…
“Why do you need a 3D-Printer?” Quote: My Wife, 2020 Now she is my best “customer” We have this IKEA Platsa cupboard in the kitchen and my wife wanted some hooks for towels. So I made this with a 8mm wooden rod, which I had still at home…
My little daughter (2 years old) destroyed one of the flexi rex's This model is to use the head for something like a “hunting” trophy. One version is with and one without centering/alignment pins. I made this quick and dirty in FreeCAD.…
I already printed so many of https://www.printables.com/@fixumdude cars, these are such incredible models. But somehow, they need to park somewhere. This is my first attempt or designing a garage for these cars. There is double and single…
The power supply for the apc monitor/screen in my office was just lying around on the table. The measurements of the power supply are approx: L = 110mm W = 50mm H = 33mm The stl file is the standard version. De 3mf has a modifier for the…
My daughter destroyed 1 of the axles because she dropped the fire truck. While I wanted to repair it, I dropped the truck again and destroyed the other 2 axles. What a genius. So I separated the axle in PrusaSlicer and drawed a small…
I just made the adapter so the distance is bigger and I can mount my FritzBox 7490 on top. Other parts are from “dustybrother”. (See Remix) Just print and glue between the two parts. Print Instruction 0.25mm DRAFT Setting for PrusaMINI in…
I designed this hook to be not sharp zo minimize injuries, because it's main purpose was to hang things like small backpacks for my daughter. Now I use it everywhere in the house, f.E. also for towels or something an mostly on childrens…
I needed a small hook to hang up my door-keys because my daughter is now big enough to reach it. We have magnetic door frames, so…
Idea: I really liked The Toy Screwdriver from Michael Fortin. Unfortunatly, my kid broke it. I didn't want to reprint the whole screwdriver and glued it together. This was the key point to remix the design. I redesigned the whole…
Remix to mount from the side. Hole distance is exactly for IKEA Platsa on the backside. But don't ask me for screws, I had some screws left which fit somehow. Lay it down to the side (yeah I know it would be better if it's already on the…
Our kitchen plate is very rough and very laborious to clean. So I made this Stand so it doesn't drip onto to kitchen plate. It's an automatic soap dispenser from the pearl.ch from “Carlo Milano”…
My wife has christmas lights which are called “Angel Hair” These are some very thin wires with small LED's built in. It's so much pain to store it without having to untangle the thin wires the next year. I used these spools to wind the…
We have the “Eva little” humidifier at home. It's a great humidifier with integrated hydrostat. And there's the problem. It's integrated and the mist always falls down and the humidity rises so the device stops until the humidity is down…
Have you already printed the hub and then noticed, that you don't need the angle because it would be better, when it's perpendicular to where you want to mount it? Yes, I have. So I didn't want to print the whole part again and decided to…
Inverted Symbols for easier printing. No supports needed. I used two color changes, because I wanted most of the brick in the same color. With a MMU you could also just paint the symbol… Yes I know, the color in the picture is grey, but…
I needed something like a funnel to decalcify my coffee machine (Tchibo Cafissimo Easy) without having to empty a glass or something like that after a few minutes. Now I can mount the “funnel” or tray and move it over the sink. Now it can…
To store the wallet, if not in use. Or maybe a glasses case, or maybe... whatever you like. 2, or 3 slots available. My Print Settings (Print the way you want, doesn't really matter) Layer Height: As high as possible. Infill: 5% Filament:…
To wszystkie aktualnie dostępne wyniki.
